Re: [PATCH 0/2] ath10k: Add support for QCA9887

[Mohammed Shafi Shajakhan <mohammed@codeaurora.org>]

On Tue, Jun 07, 2016 at 10:41:48PM +0530, Mohammed Shafi Shajakhan wrote:
> Hi Sven,
> 
> On Tue, Jun 07, 2016 at 06:54:54PM +0200, Sven Eckelmann wrote:
> > On Tuesday 07 June 2016 20:20:02 Mohammed Shafi Shajakhan wrote:
> > [...]
> > > [shafi] it would be helpful if you can share your basic test results (if its
> > > possible to share). Have you tried to bring up the card in 5ghz (or) 2ghz.
> > > Or both of them were tried ?
> > 
> > * 5GHz-only (I have no 2.4GHz capable card)
> > * card is able to scan
> > * card is able to create an AP
> > * data can be transferred via AP and client (bidirectional connection)
> > * performance was more like 15 Mibit/s for 1x1 HT20 11n devices instead of
> >   something like 35-40 Mibit/s
> 
> [shafi] sure thanks a lot, this is a good start, i will keep you posted
> with my findings and results.

[shafi] request if you can disable TX-STBC for both HT and VHT, it helped
me though. Will keep you posted with more updates.

> 
> > 
> > I cannot give you any more detailed, current performance test results because
> > they were done months ago and are most likely not relevant to describe the
> > current state. Please ask Kalle if you want to know why the old tests were
> > done many, many months ago.
> 
> [shafi] sure, hopefully we can get this sorted out. Thank you for the patches
> and support.
> 
> > 
> > Please ask Marek when you want to have tests done with the current
> > mac8011+ath10k.
> 
> [shafi] thanks
> 
> > 
> > Kind regards,
> > 	Sven
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html