Linux wireless drivers development
 help / color / mirror / Atom feed
From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Cc: kvalo@codeaurora.org
Subject: [PATCH 2/4] ath9k_hw: simplify ar9003_hw_per_calibration
Date: Mon, 11 Jul 2016 12:02:46 +0200	[thread overview]
Message-ID: <20160711100248.68678-2-nbd@nbd.name> (raw)
In-Reply-To: <20160711100248.68678-1-nbd@nbd.name>

Reduce indentation, use a variable to save a few pointer dereferences

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 53 +++++++++++++--------------
 1 file changed, 26 insertions(+), 27 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 518e649..b9ef3d3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -75,50 +75,49 @@ static bool ar9003_hw_per_calibration(struct ath_hw *ah,
 				      struct ath9k_cal_list *currCal)
 {
 	struct ath9k_hw_cal_data *caldata = ah->caldata;
-	/* Cal is assumed not done until explicitly set below */
-	bool iscaldone = false;
+	const struct ath9k_percal_data *cur_caldata = currCal->calData;
 
 	/* Calibration in progress. */
 	if (currCal->calState == CAL_RUNNING) {
 		/* Check to see if it has finished. */
-		if (!(REG_READ(ah, AR_PHY_TIMING4) & AR_PHY_TIMING4_DO_CAL)) {
+		if (REG_READ(ah, AR_PHY_TIMING4) & AR_PHY_TIMING4_DO_CAL)
+			return false;
+
+		/*
+		* Accumulate cal measures for active chains
+		*/
+		cur_caldata->calCollect(ah);
+		ah->cal_samples++;
+
+		if (ah->cal_samples >= cur_caldata->calNumSamples) {
+			unsigned int i, numChains = 0;
+			for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+				if (rxchainmask & (1 << i))
+					numChains++;
+			}
+
 			/*
-			* Accumulate cal measures for active chains
+			* Process accumulated data
 			*/
-			currCal->calData->calCollect(ah);
-			ah->cal_samples++;
-
-			if (ah->cal_samples >=
-			    currCal->calData->calNumSamples) {
-				unsigned int i, numChains = 0;
-				for (i = 0; i < AR9300_MAX_CHAINS; i++) {
-					if (rxchainmask & (1 << i))
-						numChains++;
-				}
+			cur_caldata->calPostProc(ah, numChains);
 
-				/*
-				* Process accumulated data
-				*/
-				currCal->calData->calPostProc(ah, numChains);
-
-				/* Calibration has finished. */
-				caldata->CalValid |= currCal->calData->calType;
-				currCal->calState = CAL_DONE;
-				iscaldone = true;
-			} else {
+			/* Calibration has finished. */
+			caldata->CalValid |= cur_caldata->calType;
+			currCal->calState = CAL_DONE;
+			return true;
+		} else {
 			/*
 			 * Set-up collection of another sub-sample until we
 			 * get desired number
 			 */
 			ar9003_hw_setup_calibration(ah, currCal);
-			}
 		}
-	} else if (!(caldata->CalValid & currCal->calData->calType)) {
+	} else if (!(caldata->CalValid & cur_caldata->calType)) {
 		/* If current cal is marked invalid in channel, kick it off */
 		ath9k_hw_reset_calibration(ah, currCal);
 	}
 
-	return iscaldone;
+	return false;
 }
 
 static int ar9003_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
-- 
2.8.4


  reply	other threads:[~2016-07-11 10:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-11 10:02 [PATCH 1/4] ath9k_hw: fix duplicate (and partially wrong) definition of AR_CH0_THERM Felix Fietkau
2016-07-11 10:02 ` Felix Fietkau [this message]
2016-07-11 10:02 ` [PATCH 3/4] ath9k_hw: get rid of some duplicate code in calibration init Felix Fietkau
2016-07-11 10:02 ` [PATCH 4/4] ath9k_hw: implement temperature compensation support for AR9003+ Felix Fietkau
2016-07-19 17:59 ` [1/4] ath9k_hw: fix duplicate (and partially wrong) definition of AR_CH0_THERM Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160711100248.68678-2-nbd@nbd.name \
    --to=nbd@nbd.name \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox