Linux wireless drivers development
 help / color / mirror / Atom feed
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <rmanohar@codeaurora.org>,
	"Rajkumar Manoharan" <rmanohar@qti.qualcomm.com>,
	<stable@vger.kernel.org>
Subject: [PATCH] ath10k: fix copy engine 5 destination ring stuck
Date: Wed, 21 Sep 2016 16:28:06 +0530	[thread overview]
Message-ID: <20160921105806.23980-1-rmanohar@qti.qualcomm.com> (raw)

Firmware is running watchdog timer for tracking copy engine ring index
and write index. Whenever both indices are stuck at same location for
given duration, watchdog will be trigger to assert target. While
updating copy engine destination ring write index, driver ensures that
write index will not be same as read index by finding delta between these
two indices (CE_RING_DELTA).

HTT target to host copy engine (CE5) is special case where ring buffers
will be reused and delta check is not applied while updating write index.
In rare scenario, whenever CE5 ring is full, both indices will be referring
same location and this is causing CE ring stuck issue as explained
above. This issue is originally reported on IPQ4019 during long hour stress
testing and during veriwave max clients testsuites. The same issue is
also observed in other chips as well. Fix this by ensuring that write
index is one less than read index which means that full ring is
available for receiving data.

Cc: stable@vger.kernel.org
Tested-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/ce.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 65d8d714e917..00d3f93058db 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -433,6 +433,13 @@ void ath10k_ce_rx_update_write_idx(struct ath10k_ce_pipe *pipe, u32 nentries)
 	unsigned int nentries_mask = dest_ring->nentries_mask;
 	unsigned int write_index = dest_ring->write_index;
 	u32 ctrl_addr = pipe->ctrl_addr;
+	u32 cur_write_idx = ath10k_ce_dest_ring_write_index_get(ar, ctrl_addr);
+
+	/* Prevent CE ring stuck issue that will occur when ring is full.
+	 * Make sure that write index is 1 less than read index.
+	 */
+	if ((cur_write_idx + nentries)  == dest_ring->sw_index)
+		nentries -= 1;
 
 	write_index = CE_RING_IDX_ADD(nentries_mask, write_index, nentries);
 	ath10k_ce_dest_ring_write_index_set(ar, ctrl_addr, write_index);
-- 
2.10.0

             reply	other threads:[~2016-09-21 10:58 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-21 10:58 Rajkumar Manoharan [this message]
2016-09-28  9:48 ` ath10k: fix copy engine 5 destination ring stuck Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160921105806.23980-1-rmanohar@qti.qualcomm.com \
    --to=rmanohar@qti.qualcomm.com \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=rmanohar@codeaurora.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox