Linux wireless drivers development
 help / color / mirror / Atom feed
From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes.berg@intel.com>
Subject: [PATCH 3/3] mac80211: recalculate min channel width on VHT opmode changes
Date: Wed, 11 Jan 2017 16:37:48 +0100	[thread overview]
Message-ID: <20170111153748.797-3-johannes@sipsolutions.net> (raw)
In-Reply-To: <20170111153748.797-1-johannes@sipsolutions.net>

From: Johannes Berg <johannes.berg@intel.com>

When an associated station changes its VHT operating mode this
can/will affect the bandwidth it's using, and consequently we
must recalculate the minimum bandwidth we need to use. Failure
to do so can lead to one of two scenarios:
 1) we use a too high bandwidth, this is benign
 2) we use a too narrow bandwidth, causing rate control and
    actual PHY configuration to be out of sync, which can in
    turn cause problems/crashes

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 net/mac80211/iface.c | 21 +++++++++++++++++++++
 net/mac80211/rx.c    |  9 +--------
 net/mac80211/vht.c   |  4 +++-
 3 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 41497b670e2b..d37ae7dc114b 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -6,6 +6,7 @@
  * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
  * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
+ * Copyright (c) 2016        Intel Deutschland GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -1295,6 +1296,26 @@ static void ieee80211_iface_work(struct work_struct *work)
 		} else if (ieee80211_is_action(mgmt->frame_control) &&
 			   mgmt->u.action.category == WLAN_CATEGORY_VHT) {
 			switch (mgmt->u.action.u.vht_group_notif.action_code) {
+			case WLAN_VHT_ACTION_OPMODE_NOTIF: {
+				struct ieee80211_rx_status *status;
+				enum nl80211_band band;
+				u8 opmode;
+
+				status = IEEE80211_SKB_RXCB(skb);
+				band = status->band;
+				opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode;
+
+				mutex_lock(&local->sta_mtx);
+				sta = sta_info_get_bss(sdata, mgmt->sa);
+
+				if (sta)
+					ieee80211_vht_handle_opmode(sdata, sta,
+								    opmode,
+								    band);
+
+				mutex_unlock(&local->sta_mtx);
+				break;
+			}
 			case WLAN_VHT_ACTION_GROUPID_MGMT:
 				ieee80211_process_mu_groups(sdata, mgmt);
 				break;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index c87e61358b77..3090dd4342f6 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2881,17 +2881,10 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 
 		switch (mgmt->u.action.u.vht_opmode_notif.action_code) {
 		case WLAN_VHT_ACTION_OPMODE_NOTIF: {
-			u8 opmode;
-
 			/* verify opmode is present */
 			if (len < IEEE80211_MIN_ACTION_SIZE + 2)
 				goto invalid;
-
-			opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode;
-
-			ieee80211_vht_handle_opmode(rx->sdata, rx->sta,
-						    opmode, status->band);
-			goto handled;
+			goto queue;
 		}
 		case WLAN_VHT_ACTION_GROUPID_MGMT: {
 			if (len < IEEE80211_MIN_ACTION_SIZE + 25)
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index 6832bf6ab69f..43e45bb660bc 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -527,8 +527,10 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 
 	u32 changed = __ieee80211_vht_handle_opmode(sdata, sta, opmode, band);
 
-	if (changed > 0)
+	if (changed > 0) {
+		ieee80211_recalc_min_chandef(sdata);
 		rate_control_rate_update(local, sband, sta, changed);
+	}
 }
 
 void ieee80211_get_vht_mask_from_cap(__le16 vht_cap,
-- 
2.9.3

      parent reply	other threads:[~2017-01-11 15:37 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-11 15:37 [PATCH 1/3] cfg80211: consider VHT opmode on station update Johannes Berg
2017-01-11 15:37 ` [PATCH 2/3] mac80211: calculate min channel width correctly Johannes Berg
2017-01-11 15:37 ` Johannes Berg [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170111153748.797-3-johannes@sipsolutions.net \
    --to=johannes@sipsolutions.net \
    --cc=johannes.berg@intel.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox