Linux wireless drivers development
 help / color / mirror / Atom feed
From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Cc: David Spinadel <david.spinadel@intel.com>
Subject: [PATCH] mac80211: Add RX flag to indicate ICV stripped
Date: Wed, 11 Jan 2017 16:41:10 +0100	[thread overview]
Message-ID: <20170111154110.1150-1-johannes@sipsolutions.net> (raw)

From: David Spinadel <david.spinadel@intel.com>

Add a flag that indicates that the WEP ICV was stripped from an
RX packet, allowing the device to not transfer that if it's
already checked.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 include/net/mac80211.h | 5 ++++-
 net/mac80211/wep.c     | 3 ++-
 net/mac80211/wpa.c     | 3 ++-
 3 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5f5cb194cd78..86967b85dfd0 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1017,7 +1017,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware.
  * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame,
  *	verification has been done by the hardware.
- * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
+ * @RX_FLAG_IV_STRIPPED: The IV and ICV are stripped from this frame.
  *	If this flag is set, the stack cannot do any replay detection
  *	hence the driver or hardware will have to do that.
  * @RX_FLAG_PN_VALIDATED: Currently only valid for CCMP/GCMP frames, this
@@ -1088,6 +1088,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_ALLOW_SAME_PN: Allow the same PN as same packet before.
  *	This is used for AMSDU subframes which can have the same PN as
  *	the first subframe.
+ * @RX_FLAG_ICV_STRIPPED: The ICV is stripped from this frame. CRC checking must
+ *	be done in the hardware.
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -1123,6 +1125,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_RADIOTAP_VENDOR_DATA	= BIT(31),
 	RX_FLAG_MIC_STRIPPED		= BIT_ULL(32),
 	RX_FLAG_ALLOW_SAME_PN		= BIT_ULL(33),
+	RX_FLAG_ICV_STRIPPED		= BIT_ULL(34),
 };
 
 #define RX_FLAG_STBC_SHIFT		26
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index efa3f48f1ec5..73e8f347802e 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -293,7 +293,8 @@ ieee80211_crypto_wep_decrypt(struct ieee80211_rx_data *rx)
 			return RX_DROP_UNUSABLE;
 		ieee80211_wep_remove_iv(rx->local, rx->skb, rx->key);
 		/* remove ICV */
-		if (pskb_trim(rx->skb, rx->skb->len - IEEE80211_WEP_ICV_LEN))
+		if (!(status->flag & RX_FLAG_ICV_STRIPPED) &&
+		    pskb_trim(rx->skb, rx->skb->len - IEEE80211_WEP_ICV_LEN))
 			return RX_DROP_UNUSABLE;
 	}
 
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index 8af6dd388d11..c1ef22df865f 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -294,7 +294,8 @@ ieee80211_crypto_tkip_decrypt(struct ieee80211_rx_data *rx)
 		return RX_DROP_UNUSABLE;
 
 	/* Trim ICV */
-	skb_trim(skb, skb->len - IEEE80211_TKIP_ICV_LEN);
+	if (!(status->flag & RX_FLAG_ICV_STRIPPED))
+		skb_trim(skb, skb->len - IEEE80211_TKIP_ICV_LEN);
 
 	/* Remove IV */
 	memmove(skb->data + IEEE80211_TKIP_IV_LEN, skb->data, hdrlen);
-- 
2.9.3

                 reply	other threads:[~2017-01-11 15:41 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170111154110.1150-1-johannes@sipsolutions.net \
    --to=johannes@sipsolutions.net \
    --cc=david.spinadel@intel.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox