From: "Rafał Miłecki" <zajec5@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org, "Felix Fietkau" <nbd@nbd.name>,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: [PATCH] Revert "bcma: init serial console directly from ChipCommon code"
Date: Thu, 12 Jan 2017 18:44:51 +0100 [thread overview]
Message-ID: <20170112174451.7124-1-zajec5@gmail.com> (raw)
From: Rafał Miłecki <rafal@milecki.pl>
This reverts commit 4c81acab3816 ("bcma: init serial console directly
from ChipCommon code") as it broke IRQ assignment. Getting IRQ with
bcma_core_irq helper on SoC requires MIPS core to be set. It happens
*after* ChipCommon initialization so we can't do this so early.
This fixes a regression but it seems noone noticed it for about a year.
It could be it was because serial was still somehow working, just
without IRQs. It doesn't look like a critical patch / fix.
Reported-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
drivers/bcma/bcma_private.h | 3 +++
drivers/bcma/driver_chipcommon.c | 11 +++--------
drivers/bcma/driver_mips.c | 3 +++
3 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index f642c42..168fa17 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -45,6 +45,9 @@ int bcma_sprom_get(struct bcma_bus *bus);
void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
/* driver_chipcommon_b.c */
int bcma_core_chipcommon_b_init(struct bcma_drv_cc_b *ccb);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
index b4f6520..62f5bfa 100644
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -15,8 +15,6 @@
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
-static void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
-
static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
u32 mask, u32 value)
{
@@ -186,9 +184,6 @@ void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
if (cc->capabilities & BCMA_CC_CAP_PMU)
bcma_pmu_early_init(cc);
- if (IS_BUILTIN(CONFIG_BCM47XX) && bus->hosttype == BCMA_HOSTTYPE_SOC)
- bcma_chipco_serial_init(cc);
-
if (bus->hosttype == BCMA_HOSTTYPE_SOC)
bcma_core_chipcommon_flash_detect(cc);
@@ -378,9 +373,9 @@ u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value)
return res;
}
-static void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
{
-#if IS_BUILTIN(CONFIG_BCM47XX)
unsigned int irq;
u32 baud_base;
u32 i;
@@ -422,5 +417,5 @@ static void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
ports[i].baud_base = baud_base;
ports[i].reg_shift = 0;
}
-#endif /* CONFIG_BCM47XX */
}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c
index 96f1713..89af807 100644
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -278,9 +278,12 @@ static void bcma_core_mips_nvram_init(struct bcma_drv_mips *mcore)
void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
{
+ struct bcma_bus *bus = mcore->core->bus;
+
if (mcore->early_setup_done)
return;
+ bcma_chipco_serial_init(&bus->drv_cc);
bcma_core_mips_nvram_init(mcore);
mcore->early_setup_done = true;
--
2.10.1
next reply other threads:[~2017-01-12 17:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-12 17:44 Rafał Miłecki [this message]
2017-01-13 10:16 ` [PATCH] Revert "bcma: init serial console directly from ChipCommon code" Kalle Valo
2017-01-13 10:23 ` Rafał Miłecki
2017-01-13 10:42 ` Kalle Valo
2017-01-13 11:23 ` [PATCH 4.10 fix V2] " Rafał Miłecki
2017-01-17 12:24 ` [4.10, fix, " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170112174451.7124-1-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=nbd@nbd.name \
--cc=rafal@milecki.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).