From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Lauro Ramos Venancio <lauro.venancio@openbossa.org>,
Aloisio Almeida Jr <aloisio.almeida@openbossa.org>,
Samuel Ortiz <sameo@linux.intel.com>,
linux-wireless@vger.kernel.org,
Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v3 5/5] NFC: pn544: Get rid of code duplication in ->probe()
Date: Tue, 28 Mar 2017 12:36:39 +0300 [thread overview]
Message-ID: <20170328093639.53481-5-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20170328093639.53481-1-andriy.shevchenko@linux.intel.com>
Since OF and ACPI case almost the same get rid of code duplication
by moving gpiod_get() calls directly to ->probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v3: use dev_dbg() instead of nfc_dbg()
drivers/nfc/pn544/i2c.c | 84 ++++++++++---------------------------------------
1 file changed, 17 insertions(+), 67 deletions(-)
diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c
index 6226d220f1d0..7a2910f12aab 100644
--- a/drivers/nfc/pn544/i2c.c
+++ b/drivers/nfc/pn544/i2c.c
@@ -879,58 +879,10 @@ static const struct acpi_gpio_mapping acpi_pn544_gpios[] = {
{ },
};
-static int pn544_hci_i2c_acpi_request_resources(struct i2c_client *client)
-{
- struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
- struct device *dev = &client->dev;
- int ret;
-
- ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_pn544_gpios);
- if (ret)
- return ret;
-
- /* Get EN GPIO from ACPI */
- phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
- if (IS_ERR(phy->gpiod_en)) {
- nfc_err(dev, "Unable to get EN GPIO\n");
- return PTR_ERR(phy->gpiod_en);
- }
-
- /* Get FW GPIO from ACPI */
- phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
- if (IS_ERR(phy->gpiod_fw)) {
- nfc_err(dev, "Unable to get FW GPIO\n");
- return PTR_ERR(phy->gpiod_fw);
- }
-
- return 0;
-}
-
-static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
-{
- struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
- struct device *dev = &client->dev;
-
- /* Obtaining EN GPIO from device tree */
- phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
- if (IS_ERR(phy->gpiod_en)) {
- nfc_err(dev, "Failed to get EN gpio\n");
- return PTR_ERR(phy->gpiod_en);
- }
-
- /* Obtaining FW GPIO from device tree */
- phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
- if (IS_ERR(phy->gpiod_fw)) {
- nfc_err(dev, "Failed to get FW gpio\n");
- return PTR_ERR(phy->gpiod_fw);
- }
-
- return 0;
-}
-
static int pn544_hci_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct device *dev = &client->dev;
struct pn544_i2c_phy *phy;
int r = 0;
@@ -953,24 +905,22 @@ static int pn544_hci_i2c_probe(struct i2c_client *client,
phy->i2c_dev = client;
i2c_set_clientdata(client, phy);
- /* No platform data, using device tree. */
- if (client->dev.of_node) {
- r = pn544_hci_i2c_of_request_resources(client);
- if (r) {
- nfc_err(&client->dev, "No DT data\n");
- return r;
- }
- /* Using ACPI */
- } else if (ACPI_HANDLE(&client->dev)) {
- r = pn544_hci_i2c_acpi_request_resources(client);
- if (r) {
- nfc_err(&client->dev,
- "Cannot get ACPI data\n");
- return r;
- }
- } else {
- nfc_err(&client->dev, "No platform data\n");
- return -EINVAL;
+ r = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_pn544_gpios);
+ if (r)
+ dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+ /* Get EN GPIO */
+ phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(phy->gpiod_en)) {
+ nfc_err(dev, "Unable to get EN GPIO\n");
+ return PTR_ERR(phy->gpiod_en);
+ }
+
+ /* Get FW GPIO */
+ phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
+ if (IS_ERR(phy->gpiod_fw)) {
+ nfc_err(dev, "Unable to get FW GPIO\n");
+ return PTR_ERR(phy->gpiod_fw);
}
pn544_hci_i2c_platform_init(phy);
--
2.11.0
next prev parent reply other threads:[~2017-03-28 9:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-28 9:36 [PATCH v3 1/5] NFC: pn544: Get rid of platform data Andy Shevchenko
2017-03-28 9:36 ` [PATCH v3 2/5] NFC: pn544: Covert to use GPIO descriptor Andy Shevchenko
2017-03-28 9:36 ` [PATCH v3 3/5] NFC: pn544: Convert to use devm_request_threaded_irq() Andy Shevchenko
2017-03-28 9:36 ` [PATCH v3 4/5] NFC: pn544: Add GPIO ACPI mapping table Andy Shevchenko
2017-03-28 9:36 ` Andy Shevchenko [this message]
2017-04-04 16:15 ` [PATCH v3 1/5] NFC: pn544: Get rid of platform data Andy Shevchenko
2017-04-05 8:06 ` Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170328093639.53481-5-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=aloisio.almeida@openbossa.org \
--cc=lauro.venancio@openbossa.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).