From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from out1-smtp.messagingengine.com ([66.111.4.25]:53661 "EHLO out1-smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751309AbdFFCez (ORCPT ); Mon, 5 Jun 2017 22:34:55 -0400 Date: Tue, 6 Jun 2017 12:34:51 +1000 From: "Tobin C. Harding" To: Brian Masney Cc: Wolfram Sang , driverdev-devel@linuxdriverproject.org, linux-wireless@vger.kernel.org, kernelnewbies@kernelnewbies.org Subject: Re: ks7010 firmware upload fail Message-ID: <20170606023451.GC31446@eros> (sfid-20170606_043500_297711_225A72E4) References: <20170605025637.GA23011@eros> <20170605072212.GB1495@katana> <20170605102444.GA31446@eros> <20170606000740.GA5645@3160d2e63219> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20170606000740.GA5645@3160d2e63219> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Mon, Jun 05, 2017 at 08:07:40PM -0400, Brian Masney wrote: > On Mon, Jun 05, 2017 at 08:24:44PM +1000, Tobin C. Harding wrote: > > On Mon, Jun 05, 2017 at 09:22:12AM +0200, Wolfram Sang wrote: > > > Tobin, > > > > > > > My question is should I be digging further into the MMC code or be doing > > > > something else with the driver code? > > > > > > So, you haven't found any branch that worked? No plain v4.9 or the > > > gen3-sdio branch from my tree? > > > > I have not tried cloning your tree. I am using the Rasperry Pi kernel > > source > > > > https://github.com/raspberrypi/linux > > > > which is v4.9.29 > > Hi Tobin, > > Here are some instructions on how to compile an upstream kernel for a > Raspberry Pi: http://elinux.org/RPi_Upstream_Kernel_Compilation. > It describes setting up u-boot as the boot loader instead of the > boot loader that the Raspberry Pi kernel uses. One gotcha to be aware of > is that the config.txt file on the sd card won't be used. Thanks Brian.