* [PATCH 1/2] staging: rtl8192e: remove dead private call to _rtl92e_ioctl.
@ 2017-06-14 19:08 Malcolm Priestley
2017-06-14 19:08 ` [PATCH 2/2] staging: rtl8192e: remove dead code rtllib_wpa_supplicant_ioctl Malcolm Priestley
0 siblings, 1 reply; 2+ messages in thread
From: Malcolm Priestley @ 2017-06-14 19:08 UTC (permalink / raw)
To: gregkh; +Cc: linux-wireless, devel, Malcolm Priestley
A RTL_IOCTL_WPA_SUPPLICANT call is a proprietary version of
wpa supplicant.
All kernel calls use SIOCSIWENCODEEXT call via wireless handlers
already used in this driver.
Remove dead code.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
---
drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 126 ---------------------------
drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 2 -
2 files changed, 128 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index a4d1bac4a844..aca52654825b 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -2275,131 +2275,6 @@ static int _rtl92e_set_mac_adr(struct net_device *dev, void *mac)
return 0;
}
-/* based on ipw2200 driver */
-static int _rtl92e_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- struct r8192_priv *priv = rtllib_priv(dev);
- struct iwreq *wrq = (struct iwreq *)rq;
- int ret = -1;
- struct rtllib_device *ieee = priv->rtllib;
- u32 key[4];
- const u8 broadcast_addr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
- struct iw_point *p = &wrq->u.data;
- struct ieee_param *ipw = NULL;
-
- mutex_lock(&priv->wx_mutex);
-
- switch (cmd) {
- case RTL_IOCTL_WPA_SUPPLICANT:
- if (p->length < sizeof(struct ieee_param) || !p->pointer) {
- ret = -EINVAL;
- goto out;
- }
-
- ipw = memdup_user(p->pointer, p->length);
- if (IS_ERR(ipw)) {
- ret = PTR_ERR(ipw);
- goto out;
- }
-
- if (ipw->cmd == IEEE_CMD_SET_ENCRYPTION) {
- if (ipw->u.crypt.set_tx) {
- if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
- ieee->pairwise_key_type = KEY_TYPE_CCMP;
- else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
- ieee->pairwise_key_type = KEY_TYPE_TKIP;
- else if (strcmp(ipw->u.crypt.alg, "WEP") == 0) {
- if (ipw->u.crypt.key_len == 13)
- ieee->pairwise_key_type =
- KEY_TYPE_WEP104;
- else if (ipw->u.crypt.key_len == 5)
- ieee->pairwise_key_type =
- KEY_TYPE_WEP40;
- } else {
- ieee->pairwise_key_type = KEY_TYPE_NA;
- }
-
- if (ieee->pairwise_key_type) {
- if (is_zero_ether_addr(ieee->ap_mac_addr))
- ieee->iw_mode = IW_MODE_ADHOC;
- memcpy((u8 *)key, ipw->u.crypt.key, 16);
- rtl92e_enable_hw_security_config(dev);
- rtl92e_set_swcam(dev, 4,
- ipw->u.crypt.idx,
- ieee->pairwise_key_type,
- (u8 *)ieee->ap_mac_addr,
- 0, key, 0);
- rtl92e_set_key(dev, 4, ipw->u.crypt.idx,
- ieee->pairwise_key_type,
- (u8 *)ieee->ap_mac_addr,
- 0, key);
- if (ieee->iw_mode == IW_MODE_ADHOC) {
- rtl92e_set_swcam(dev,
- ipw->u.crypt.idx,
- ipw->u.crypt.idx,
- ieee->pairwise_key_type,
- (u8 *)ieee->ap_mac_addr,
- 0, key, 0);
- rtl92e_set_key(dev,
- ipw->u.crypt.idx,
- ipw->u.crypt.idx,
- ieee->pairwise_key_type,
- (u8 *)ieee->ap_mac_addr,
- 0, key);
- }
- }
- if ((ieee->pairwise_key_type ==
- KEY_TYPE_CCMP) &&
- ieee->pHTInfo->bCurrentHTSupport) {
- rtl92e_writeb(dev, 0x173, 1);
- }
-
- } else {
- memcpy((u8 *)key, ipw->u.crypt.key, 16);
- if (strcmp(ipw->u.crypt.alg, "CCMP") == 0)
- ieee->group_key_type = KEY_TYPE_CCMP;
- else if (strcmp(ipw->u.crypt.alg, "TKIP") == 0)
- ieee->group_key_type = KEY_TYPE_TKIP;
- else if (strcmp(ipw->u.crypt.alg, "WEP") == 0) {
- if (ipw->u.crypt.key_len == 13)
- ieee->group_key_type =
- KEY_TYPE_WEP104;
- else if (ipw->u.crypt.key_len == 5)
- ieee->group_key_type =
- KEY_TYPE_WEP40;
- } else
- ieee->group_key_type = KEY_TYPE_NA;
-
- if (ieee->group_key_type) {
- rtl92e_set_swcam(dev, ipw->u.crypt.idx,
- ipw->u.crypt.idx,
- ieee->group_key_type,
- broadcast_addr, 0, key,
- 0);
- rtl92e_set_key(dev, ipw->u.crypt.idx,
- ipw->u.crypt.idx,
- ieee->group_key_type,
- broadcast_addr, 0, key);
- }
- }
- }
-
- ret = rtllib_wpa_supplicant_ioctl(priv->rtllib, &wrq->u.data,
- 0);
- kfree(ipw);
- break;
- default:
- ret = -EOPNOTSUPP;
- break;
- }
-
-out:
- mutex_unlock(&priv->wx_mutex);
-
- return ret;
-}
-
-
static irqreturn_t _rtl92e_irq(int irq, void *netdev)
{
struct net_device *dev = netdev;
@@ -2542,7 +2417,6 @@ static const struct net_device_ops rtl8192_netdev_ops = {
.ndo_open = _rtl92e_open,
.ndo_stop = _rtl92e_close,
.ndo_tx_timeout = _rtl92e_tx_timeout,
- .ndo_do_ioctl = _rtl92e_ioctl,
.ndo_set_rx_mode = _rtl92e_set_multicast,
.ndo_set_mac_address = _rtl92e_set_mac_adr,
.ndo_validate_addr = eth_validate_addr,
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
index 0335823e2766..9d3089cb6a5a 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
@@ -102,8 +102,6 @@
#define PHY_RSSI_SLID_WIN_MAX 100
-#define RTL_IOCTL_WPA_SUPPLICANT (SIOCIWFIRSTPRIV + 30)
-
#define TxBBGainTableLength 37
#define CCKTxBBGainTableLength 23
--
2.11.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 2/2] staging: rtl8192e: remove dead code rtllib_wpa_supplicant_ioctl
2017-06-14 19:08 [PATCH 1/2] staging: rtl8192e: remove dead private call to _rtl92e_ioctl Malcolm Priestley
@ 2017-06-14 19:08 ` Malcolm Priestley
0 siblings, 0 replies; 2+ messages in thread
From: Malcolm Priestley @ 2017-06-14 19:08 UTC (permalink / raw)
To: gregkh; +Cc: linux-wireless, devel, Malcolm Priestley
Following removal of _rtl92e_ioctl this function along with associated
macros, structure ieee_param and functions become dead code.
Remove functions rtllib_wpa_enable, rtllib_wpa_assoc_frame, rtllib_wpa_mlme,
rtllib_wpa_set_wpa_ie, rtllib_wpa_set_auth_algs, rtllib_wpa_set_param,
rtllib_wpa_set_encryption and rtllib_wpa_supplicant_ioctl.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
---
drivers/staging/rtl8192e/rtllib.h | 54 -----
drivers/staging/rtl8192e/rtllib_softmac.c | 383 ------------------------------
2 files changed, 437 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index 827651b62791..0042a0f6cf79 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -335,60 +335,8 @@ enum rt_op_mode {
#define MGMT_QUEUE_NUM 5
-#define IEEE_CMD_SET_WPA_PARAM 1
-#define IEEE_CMD_SET_WPA_IE 2
-#define IEEE_CMD_SET_ENCRYPTION 3
-#define IEEE_CMD_MLME 4
-
-#define IEEE_PARAM_WPA_ENABLED 1
-#define IEEE_PARAM_TKIP_COUNTERMEASURES 2
-#define IEEE_PARAM_DROP_UNENCRYPTED 3
-#define IEEE_PARAM_PRIVACY_INVOKED 4
-#define IEEE_PARAM_AUTH_ALGS 5
-#define IEEE_PARAM_IEEE_802_1X 6
-#define IEEE_PARAM_WPAX_SELECT 7
-
-#define IEEE_MLME_STA_DEAUTH 1
-#define IEEE_MLME_STA_DISASSOC 2
-
-
-#define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
-#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
-#define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
-#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
-#define IEEE_CRYPT_ALG_NAME_LEN 16
-
#define MAX_IE_LEN 0xff
-struct ieee_param {
- u32 cmd;
- u8 sta_addr[ETH_ALEN];
- union {
- struct {
- u8 name;
- u32 value;
- } wpa_param;
- struct {
- u32 len;
- u8 reserved[32];
- u8 data[0];
- } wpa_ie;
- struct {
- int command;
- int reason_code;
- } mlme;
- struct {
- u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
- u8 set_tx;
- u32 err;
- u8 idx;
- u8 seq[8]; /* sequence counter (set: RX, get: TX) */
- u16 key_len;
- u8 key[0];
- } crypt;
- } u;
-};
-
#define msleep_interruptible_rsl msleep_interruptible
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
@@ -2066,8 +2014,6 @@ void rtllib_stop_all_queues(struct rtllib_device *ieee);
struct sk_buff *rtllib_get_beacon(struct rtllib_device *ieee);
void rtllib_start_send_beacons(struct rtllib_device *ieee);
void rtllib_stop_send_beacons(struct rtllib_device *ieee);
-int rtllib_wpa_supplicant_ioctl(struct rtllib_device *ieee,
- struct iw_point *p, u8 is_mesh);
void notify_wx_assoc_event(struct rtllib_device *ieee);
void rtllib_ps_tx_ack(struct rtllib_device *ieee, short success);
diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
index 776e99741431..f629e99956b7 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac.c
@@ -3077,333 +3077,6 @@ void rtllib_softmac_free(struct rtllib_device *ieee)
tasklet_kill(&ieee->ps_task);
}
-/********************************************************
- * Start of WPA code. *
- * this is stolen from the ipw2200 driver *
- ********************************************************/
-
-
-static int rtllib_wpa_enable(struct rtllib_device *ieee, int value)
-{
- /* This is called when wpa_supplicant loads and closes the driver
- * interface.
- */
- netdev_info(ieee->dev, "%s WPA\n", value ? "enabling" : "disabling");
- ieee->wpa_enabled = value;
- eth_zero_addr(ieee->ap_mac_addr);
- return 0;
-}
-
-
-static void rtllib_wpa_assoc_frame(struct rtllib_device *ieee, char *wpa_ie,
- int wpa_ie_len)
-{
- /* make sure WPA is enabled */
- rtllib_wpa_enable(ieee, 1);
-
- rtllib_disassociate(ieee);
-}
-
-
-static int rtllib_wpa_mlme(struct rtllib_device *ieee, int command, int reason)
-{
-
- int ret = 0;
-
- switch (command) {
- case IEEE_MLME_STA_DEAUTH:
- break;
-
- case IEEE_MLME_STA_DISASSOC:
- rtllib_disassociate(ieee);
- break;
-
- default:
- netdev_info(ieee->dev, "Unknown MLME request: %d\n", command);
- ret = -EOPNOTSUPP;
- }
-
- return ret;
-}
-
-
-static int rtllib_wpa_set_wpa_ie(struct rtllib_device *ieee,
- struct ieee_param *param, int plen)
-{
- u8 *buf;
-
- if (param->u.wpa_ie.len > MAX_WPA_IE_LEN ||
- (param->u.wpa_ie.len && param->u.wpa_ie.data == NULL))
- return -EINVAL;
-
- if (param->u.wpa_ie.len) {
- buf = kmemdup(param->u.wpa_ie.data, param->u.wpa_ie.len,
- GFP_KERNEL);
- if (buf == NULL)
- return -ENOMEM;
-
- kfree(ieee->wpa_ie);
- ieee->wpa_ie = buf;
- ieee->wpa_ie_len = param->u.wpa_ie.len;
- } else {
- kfree(ieee->wpa_ie);
- ieee->wpa_ie = NULL;
- ieee->wpa_ie_len = 0;
- }
-
- rtllib_wpa_assoc_frame(ieee, ieee->wpa_ie, ieee->wpa_ie_len);
- return 0;
-}
-
-#define AUTH_ALG_OPEN_SYSTEM 0x1
-#define AUTH_ALG_SHARED_KEY 0x2
-#define AUTH_ALG_LEAP 0x4
-static int rtllib_wpa_set_auth_algs(struct rtllib_device *ieee, int value)
-{
-
- struct rtllib_security sec = {
- .flags = SEC_AUTH_MODE,
- };
-
- if (value & AUTH_ALG_SHARED_KEY) {
- sec.auth_mode = WLAN_AUTH_SHARED_KEY;
- ieee->open_wep = 0;
- ieee->auth_mode = 1;
- } else if (value & AUTH_ALG_OPEN_SYSTEM) {
- sec.auth_mode = WLAN_AUTH_OPEN;
- ieee->open_wep = 1;
- ieee->auth_mode = 0;
- } else if (value & AUTH_ALG_LEAP) {
- sec.auth_mode = WLAN_AUTH_LEAP >> 6;
- ieee->open_wep = 1;
- ieee->auth_mode = 2;
- }
-
-
- if (ieee->set_security)
- ieee->set_security(ieee->dev, &sec);
-
- return 0;
-}
-
-static int rtllib_wpa_set_param(struct rtllib_device *ieee, u8 name, u32 value)
-{
- int ret = 0;
- unsigned long flags;
-
- switch (name) {
- case IEEE_PARAM_WPA_ENABLED:
- ret = rtllib_wpa_enable(ieee, value);
- break;
-
- case IEEE_PARAM_TKIP_COUNTERMEASURES:
- ieee->tkip_countermeasures = value;
- break;
-
- case IEEE_PARAM_DROP_UNENCRYPTED:
- {
- /* HACK:
- *
- * wpa_supplicant calls set_wpa_enabled when the driver
- * is loaded and unloaded, regardless of if WPA is being
- * used. No other calls are made which can be used to
- * determine if encryption will be used or not prior to
- * association being expected. If encryption is not being
- * used, drop_unencrypted is set to false, else true -- we
- * can use this to determine if the CAP_PRIVACY_ON bit should
- * be set.
- */
- struct rtllib_security sec = {
- .flags = SEC_ENABLED,
- .enabled = value,
- };
- ieee->drop_unencrypted = value;
- /* We only change SEC_LEVEL for open mode. Others
- * are set by ipw_wpa_set_encryption.
- */
- if (!value) {
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_0;
- } else {
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_1;
- }
- if (ieee->set_security)
- ieee->set_security(ieee->dev, &sec);
- break;
- }
-
- case IEEE_PARAM_PRIVACY_INVOKED:
- ieee->privacy_invoked = value;
- break;
-
- case IEEE_PARAM_AUTH_ALGS:
- ret = rtllib_wpa_set_auth_algs(ieee, value);
- break;
-
- case IEEE_PARAM_IEEE_802_1X:
- ieee->ieee802_1x = value;
- break;
- case IEEE_PARAM_WPAX_SELECT:
- spin_lock_irqsave(&ieee->wpax_suitlist_lock, flags);
- spin_unlock_irqrestore(&ieee->wpax_suitlist_lock, flags);
- break;
-
- default:
- netdev_info(ieee->dev, "Unknown WPA param: %d\n", name);
- ret = -EOPNOTSUPP;
- }
-
- return ret;
-}
-
-/* implementation borrowed from hostap driver */
-static int rtllib_wpa_set_encryption(struct rtllib_device *ieee,
- struct ieee_param *param, int param_len,
- u8 is_mesh)
-{
- int ret = 0;
- struct lib80211_crypto_ops *ops;
- struct lib80211_crypt_data **crypt;
-
- struct rtllib_security sec = {
- .flags = 0,
- };
-
- param->u.crypt.err = 0;
- param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
-
- if (param_len !=
- (int) ((char *) param->u.crypt.key - (char *) param) +
- param->u.crypt.key_len) {
- netdev_info(ieee->dev, "Len mismatch %d, %d\n", param_len,
- param->u.crypt.key_len);
- return -EINVAL;
- }
- if (is_broadcast_ether_addr(param->sta_addr)) {
- if (param->u.crypt.idx >= NUM_WEP_KEYS)
- return -EINVAL;
- crypt = &ieee->crypt_info.crypt[param->u.crypt.idx];
- } else {
- return -EINVAL;
- }
-
- if (strcmp(param->u.crypt.alg, "none") == 0) {
- if (crypt) {
- sec.enabled = 0;
- sec.level = SEC_LEVEL_0;
- sec.flags |= SEC_ENABLED | SEC_LEVEL;
- lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt);
- }
- goto done;
- }
- sec.enabled = 1;
- sec.flags |= SEC_ENABLED;
-
- /* IPW HW cannot build TKIP MIC, host decryption still needed. */
- if (!(ieee->host_encrypt || ieee->host_decrypt) &&
- strcmp(param->u.crypt.alg, "R-TKIP"))
- goto skip_host_crypt;
-
- ops = lib80211_get_crypto_ops(param->u.crypt.alg);
- if (ops == NULL && strcmp(param->u.crypt.alg, "R-WEP") == 0) {
- request_module("rtllib_crypt_wep");
- ops = lib80211_get_crypto_ops(param->u.crypt.alg);
- } else if (ops == NULL && strcmp(param->u.crypt.alg, "R-TKIP") == 0) {
- request_module("rtllib_crypt_tkip");
- ops = lib80211_get_crypto_ops(param->u.crypt.alg);
- } else if (ops == NULL && strcmp(param->u.crypt.alg, "R-CCMP") == 0) {
- request_module("rtllib_crypt_ccmp");
- ops = lib80211_get_crypto_ops(param->u.crypt.alg);
- }
- if (ops == NULL) {
- netdev_info(ieee->dev, "unknown crypto alg '%s'\n",
- param->u.crypt.alg);
- param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
- ret = -EINVAL;
- goto done;
- }
- if (*crypt == NULL || (*crypt)->ops != ops) {
- struct lib80211_crypt_data *new_crypt;
-
- lib80211_crypt_delayed_deinit(&ieee->crypt_info, crypt);
-
- new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL);
- if (new_crypt == NULL) {
- ret = -ENOMEM;
- goto done;
- }
- new_crypt->ops = ops;
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
- new_crypt->priv =
- new_crypt->ops->init(param->u.crypt.idx);
-
- if (new_crypt->priv == NULL) {
- kfree(new_crypt);
- param->u.crypt.err = IEEE_CRYPT_ERR_CRYPT_INIT_FAILED;
- ret = -EINVAL;
- goto done;
- }
-
- *crypt = new_crypt;
- }
-
- if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key &&
- (*crypt)->ops->set_key(param->u.crypt.key,
- param->u.crypt.key_len, param->u.crypt.seq,
- (*crypt)->priv) < 0) {
- netdev_info(ieee->dev, "key setting failed\n");
- param->u.crypt.err = IEEE_CRYPT_ERR_KEY_SET_FAILED;
- ret = -EINVAL;
- goto done;
- }
-
- skip_host_crypt:
- if (param->u.crypt.set_tx) {
- ieee->crypt_info.tx_keyidx = param->u.crypt.idx;
- sec.active_key = param->u.crypt.idx;
- sec.flags |= SEC_ACTIVE_KEY;
- } else
- sec.flags &= ~SEC_ACTIVE_KEY;
-
- memcpy(sec.keys[param->u.crypt.idx],
- param->u.crypt.key,
- param->u.crypt.key_len);
- sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len;
- sec.flags |= (1 << param->u.crypt.idx);
-
- if (strcmp(param->u.crypt.alg, "R-WEP") == 0) {
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_1;
- } else if (strcmp(param->u.crypt.alg, "R-TKIP") == 0) {
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_2;
- } else if (strcmp(param->u.crypt.alg, "R-CCMP") == 0) {
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_3;
- }
- done:
- if (ieee->set_security)
- ieee->set_security(ieee->dev, &sec);
-
- /* Do not reset port if card is in Managed mode since resetting will
- * generate new IEEE 802.11 authentication which may end up in looping
- * with IEEE 802.1X. If your hardware requires a reset after WEP
- * configuration (for example... Prism2), implement the reset_port in
- * the callbacks structures used to initialize the 802.11 stack.
- */
- if (ieee->reset_on_keychange &&
- ieee->iw_mode != IW_MODE_INFRA &&
- ieee->reset_port &&
- ieee->reset_port(ieee->dev)) {
- netdev_info(ieee->dev, "reset_port failed\n");
- param->u.crypt.err = IEEE_CRYPT_ERR_CARD_CONF_FAILED;
- return -EINVAL;
- }
-
- return ret;
-}
-
static inline struct sk_buff *
rtllib_disauth_skb(struct rtllib_network *beacon,
struct rtllib_device *ieee, u16 asRsn)
@@ -3502,62 +3175,6 @@ u8 rtllib_ap_sec_type(struct rtllib_device *ieee)
}
}
-int rtllib_wpa_supplicant_ioctl(struct rtllib_device *ieee, struct iw_point *p,
- u8 is_mesh)
-{
- struct ieee_param *param;
- int ret = 0;
-
- mutex_lock(&ieee->wx_mutex);
-
- if (p->length < sizeof(struct ieee_param) || !p->pointer) {
- ret = -EINVAL;
- goto out;
- }
-
- param = memdup_user(p->pointer, p->length);
- if (IS_ERR(param)) {
- ret = PTR_ERR(param);
- goto out;
- }
-
- switch (param->cmd) {
- case IEEE_CMD_SET_WPA_PARAM:
- ret = rtllib_wpa_set_param(ieee, param->u.wpa_param.name,
- param->u.wpa_param.value);
- break;
-
- case IEEE_CMD_SET_WPA_IE:
- ret = rtllib_wpa_set_wpa_ie(ieee, param, p->length);
- break;
-
- case IEEE_CMD_SET_ENCRYPTION:
- ret = rtllib_wpa_set_encryption(ieee, param, p->length, 0);
- break;
-
- case IEEE_CMD_MLME:
- ret = rtllib_wpa_mlme(ieee, param->u.mlme.command,
- param->u.mlme.reason_code);
- break;
-
- default:
- netdev_info(ieee->dev, "Unknown WPA supplicant request: %d\n",
- param->cmd);
- ret = -EOPNOTSUPP;
- break;
- }
-
- if (ret == 0 && copy_to_user(p->pointer, param, p->length))
- ret = -EFAULT;
-
- kfree(param);
-out:
- mutex_unlock(&ieee->wx_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(rtllib_wpa_supplicant_ioctl);
-
static void rtllib_MgntDisconnectIBSS(struct rtllib_device *rtllib)
{
u8 OpMode;
--
2.11.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-06-14 19:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-06-14 19:08 [PATCH 1/2] staging: rtl8192e: remove dead private call to _rtl92e_ioctl Malcolm Priestley
2017-06-14 19:08 ` [PATCH 2/2] staging: rtl8192e: remove dead code rtllib_wpa_supplicant_ioctl Malcolm Priestley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).