[PATCH] mwifiex: check for mfg_mode in add_virtual_intf

[PATCH] mwifiex: check for mfg_mode in add_virtual_intf

[Ganapathi Bhat]

If driver is loaded with 'mfg_mode' enabled, then the sending
commands are not allowed. So, skip sending commands, to firmware
in mwifiex_add_virtual_intf if 'mfg_mode' is enabled.

Fixes: 7311ea850079 ("mwifiex: fix AP start problem for newly added interface")
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
---
v2: addressed Brian's comments.
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 32c5074..ad1ebd8 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -2959,18 +2959,21 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 	}
 
 	mwifiex_init_priv_params(priv, dev);
-	mwifiex_set_mac_address(priv, dev);
 
 	priv->netdev = dev;
 
-	ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
-			       HostCmd_ACT_GEN_SET, 0, NULL, true);
-	if (ret)
-		goto err_set_bss_mode;
+	if (!adapter->mfg_mode) {
+		mwifiex_set_mac_address(priv, dev);
 
-	ret = mwifiex_sta_init_cmd(priv, false, false);
-	if (ret)
-		goto err_sta_init;
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
+				       HostCmd_ACT_GEN_SET, 0, NULL, true);
+		if (ret)
+			goto err_set_bss_mode;
+
+		ret = mwifiex_sta_init_cmd(priv, false, false);
+		if (ret)
+			goto err_sta_init;
+	}
 
 	mwifiex_setup_ht_caps(&wiphy->bands[NL80211_BAND_2GHZ]->ht_cap, priv);
 	if (adapter->is_hw_11ac_capable)
-- 
1.9.1

Re: [PATCH] mwifiex: check for mfg_mode in add_virtual_intf

[Brian Norris]

Hi,

Could have used a 'v2' in the subject, but hopefully that doesn't bother
Kalle too much.

On Fri, Sep 08, 2017 at 02:02:43AM +0530, Ganapathi Bhat wrote:
> If driver is loaded with 'mfg_mode' enabled, then the sending
> commands are not allowed. So, skip sending commands, to firmware
> in mwifiex_add_virtual_intf if 'mfg_mode' is enabled.
> 
> Fixes: 7311ea850079 ("mwifiex: fix AP start problem for newly added interface")
> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
> ---
> v2: addressed Brian's comments.
> ---
>  drivers/net/wireless/marvell/mwifiex/cfg80211.c | 19 +++++++++++--------
>  1 file changed, 11 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
> index 32c5074..ad1ebd8 100644
> --- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
> +++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
> @@ -2959,18 +2959,21 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
>  	}
>  
>  	mwifiex_init_priv_params(priv, dev);
> -	mwifiex_set_mac_address(priv, dev);
>  
>  	priv->netdev = dev;
>  
> -	ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
> -			       HostCmd_ACT_GEN_SET, 0, NULL, true);
> -	if (ret)
> -		goto err_set_bss_mode;
> +	if (!adapter->mfg_mode) {
> +		mwifiex_set_mac_address(priv, dev);
>  
> -	ret = mwifiex_sta_init_cmd(priv, false, false);
> -	if (ret)
> -		goto err_sta_init;
> +		ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
> +				       HostCmd_ACT_GEN_SET, 0, NULL, true);
> +		if (ret)
> +			goto err_set_bss_mode;
> +
> +		ret = mwifiex_sta_init_cmd(priv, false, false);
> +		if (ret)
> +			goto err_sta_init;
> +	}

Seems better to me.

Reviewed-by: Brian Norris <briannorris@chromium.org>

>  
>  	mwifiex_setup_ht_caps(&wiphy->bands[NL80211_BAND_2GHZ]->ht_cap, priv);
>  	if (adapter->is_hw_11ac_capable)
> -- 
> 1.9.1
> 

Re: [PATCH] mwifiex: check for mfg_mode in add_virtual_intf

[Kalle Valo]

Brian Norris <briannorris@chromium.org> writes:

> Could have used a 'v2' in the subject, but hopefully that doesn't bother
> Kalle too much.

It does create more work for me when sorting patches so please always
try include the version in the subject. But no need to resend.

-- 
Kalle Valo

RE: [EXT] Re: [PATCH] mwifiex: check for mfg_mode in add_virtual_intf

[Ganapathi Bhat]

Hi Kalle,

> -----Original Message-----
> From: Kalle Valo [mailto:kvalo@codeaurora.org]
> Sent: Tuesday, September 12, 2017 11:33 AM
> To: Brian Norris
> Cc: Ganapathi Bhat; linux-wireless@vger.kernel.org; Cathy Luo; Xinming
> Hu; Zhiyuan Yang; James Cao; Mangesh Malusare
> Subject: [EXT] Re: [PATCH] mwifiex: check for mfg_mode in
> add_virtual_intf
> 
> External Email
> 
> ----------------------------------------------------------------------
> Brian Norris <briannorris@chromium.org> writes:
> 
> > Could have used a 'v2' in the subject, but hopefully that doesn't
> > bother Kalle too much.
> 
> It does create more work for me when sorting patches so please always
> try include the version in the subject. But no need to resend.
Sure. I will keep this in mind for future submits.
> 
> --
> Kalle Valo

Thanks,
Ganapathi

Re: mwifiex: check for mfg_mode in add_virtual_intf

[Kalle Valo]

Ganapathi Bhat <gbhat@marvell.com> wrote:

> If driver is loaded with 'mfg_mode' enabled, then the sending
> commands are not allowed. So, skip sending commands, to firmware
> in mwifiex_add_virtual_intf if 'mfg_mode' is enabled.
> 
> Fixes: 7311ea850079 ("mwifiex: fix AP start problem for newly added interface")
> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
> Reviewed-by: Brian Norris <briannorris@chromium.org>

Patch applied to wireless-drivers-next.git, thanks.

26177d7f3969 mwifiex: check for mfg_mode in add_virtual_intf

-- 
https://patchwork.kernel.org/patch/9942827/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches