From: Denis Kenzior <denkenz@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Denis Kenzior <denkenz@gmail.com>
Subject: [RFC v2 5/5] mac80211: Add support for tx_control_port
Date: Wed, 10 Jan 2018 11:09:38 -0600 [thread overview]
Message-ID: <20180110170938.2341-6-denkenz@gmail.com> (raw)
In-Reply-To: <20180110170938.2341-1-denkenz@gmail.com>
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
---
net/mac80211/cfg.c | 1 +
net/mac80211/ieee80211_i.h | 3 +++
net/mac80211/main.c | 1 +
net/mac80211/tx.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 51 insertions(+)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index f53bfb27295f..71cb45e517b0 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3787,4 +3787,5 @@ const struct cfg80211_ops mac80211_config_ops = {
.add_nan_func = ieee80211_add_nan_func,
.del_nan_func = ieee80211_del_nan_func,
.set_multicast_to_unicast = ieee80211_set_multicast_to_unicast,
+ .tx_control_port = ieee80211_tx_control_port,
};
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6f91aea6a4cb..be444305ef06 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1735,6 +1735,9 @@ void ieee80211_check_fast_xmit(struct sta_info *sta);
void ieee80211_check_fast_xmit_all(struct ieee80211_local *local);
void ieee80211_check_fast_xmit_iface(struct ieee80211_sub_if_data *sdata);
void ieee80211_clear_fast_xmit(struct sta_info *sta);
+int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *buf, size_t len,
+ const u8 *dest, u16 proto, bool unencrypted);
/* HT */
void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 0785d04a80bc..fe163c31d431 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -976,6 +976,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
/* mac80211 supports control port protocol changing */
local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
+ local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_OVER_NL80211;
if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) {
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 25904af38839..c22d2fa02d76 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -4754,3 +4754,49 @@ void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
ieee80211_xmit(sdata, NULL, skb);
local_bh_enable();
}
+
+int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
+ const u8 *buf, size_t len,
+ const u8 *dest, u16 proto, bool unencrypted)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
+ struct sk_buff *skb;
+ struct ethhdr *ehdr;
+ u32 flags;
+
+ /* Only accept CONTROL_PORT_PROTOCOL configured in CONNECT/ASSOCIATE
+ * or Pre-Authentication
+ */
+ if (proto != sdata->control_port_protocol &&
+ proto != cpu_to_be16(0x88c7))
+ return -EINVAL;
+
+ if (unencrypted)
+ flags = IEEE80211_TX_INTFL_DONT_ENCRYPT;
+ else
+ flags = 0;
+
+ skb = dev_alloc_skb(local->hw.extra_tx_headroom +
+ sizeof(struct ethhdr) + len);
+ if (!skb)
+ return -ENOMEM;
+
+ skb_reserve(skb, local->hw.extra_tx_headroom + sizeof(struct ethhdr));
+
+ skb_put_data(skb, buf, len);
+
+ ehdr = skb_push(skb, sizeof(struct ethhdr));
+ memcpy(ehdr->h_dest, dest, ETH_ALEN);
+ memcpy(ehdr->h_source, sdata->vif.addr, ETH_ALEN);
+ ehdr->h_proto = proto;
+
+ skb->dev = dev;
+ skb->protocol = htons(ETH_P_802_3);
+ skb_reset_network_header(skb);
+ skb_reset_mac_header(skb);
+
+ __ieee80211_subif_start_xmit(skb, skb->dev, flags);
+
+ return 0;
+}
--
2.13.5
next prev parent reply other threads:[~2018-01-10 17:09 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-10 17:09 [RFC v2 0/5] EAPoL over NL80211 Denis Kenzior
2018-01-10 17:09 ` [RFC v2 1/5] nl80211: Add CONTROL_PORT_OVER_NL80211 attribute Denis Kenzior
2018-01-15 12:58 ` Johannes Berg
2018-01-10 17:09 ` [RFC v2 2/5] nl80211: Add CMD_CONTROL_PORT_FRAME API Denis Kenzior
2018-01-15 13:04 ` Johannes Berg
2018-01-10 17:09 ` [RFC v2 3/5] mac80211: Send control port frames over nl80211 Denis Kenzior
2018-01-15 13:09 ` Johannes Berg
2018-01-15 15:24 ` Denis Kenzior
2018-01-16 13:33 ` Johannes Berg
2018-01-10 17:09 ` [RFC v2 4/5] nl80211: Implement TX of control port frames Denis Kenzior
2018-01-15 13:14 ` Johannes Berg
2018-01-15 16:03 ` Denis Kenzior
2018-01-16 13:32 ` Johannes Berg
2018-01-10 17:09 ` Denis Kenzior [this message]
2018-01-15 13:15 ` [RFC v2 5/5] mac80211: Add support for tx_control_port Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180110170938.2341-6-denkenz@gmail.com \
--to=denkenz@gmail.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).