linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Denis Kenzior <denkenz@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: Denis Kenzior <denkenz@gmail.com>
Subject: [PATCH 6/6] mac80211: Add support for tx_control_port
Date: Wed, 31 Jan 2018 15:33:29 -0600	[thread overview]
Message-ID: <20180131213329.25322-7-denkenz@gmail.com> (raw)
In-Reply-To: <20180131213329.25322-1-denkenz@gmail.com>

Signed-off-by: Denis Kenzior <denkenz@gmail.com>
---
 net/mac80211/cfg.c         |  1 +
 net/mac80211/ieee80211_i.h |  3 +++
 net/mac80211/main.c        |  2 ++
 net/mac80211/tx.c          | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 52 insertions(+)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index f53bfb27295f..71cb45e517b0 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3787,4 +3787,5 @@ const struct cfg80211_ops mac80211_config_ops = {
 	.add_nan_func = ieee80211_add_nan_func,
 	.del_nan_func = ieee80211_del_nan_func,
 	.set_multicast_to_unicast = ieee80211_set_multicast_to_unicast,
+	.tx_control_port = ieee80211_tx_control_port,
 };
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6f91aea6a4cb..be444305ef06 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1735,6 +1735,9 @@ void ieee80211_check_fast_xmit(struct sta_info *sta);
 void ieee80211_check_fast_xmit_all(struct ieee80211_local *local);
 void ieee80211_check_fast_xmit_iface(struct ieee80211_sub_if_data *sdata);
 void ieee80211_clear_fast_xmit(struct sta_info *sta);
+int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
+			      const u8 *buf, size_t len,
+			      const u8 *dest, u16 proto, bool unencrypted);
 
 /* HT */
 void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 0785d04a80bc..e5a51267c75d 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -554,6 +554,8 @@ struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
 			   NL80211_FEATURE_USERSPACE_MPM |
 			   NL80211_FEATURE_FULL_AP_CLIENT_STATE;
 	wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_FILS_STA);
+	wiphy_ext_feature_set(wiphy,
+			      NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211);
 
 	if (!ops->hw_scan)
 		wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 25904af38839..031b27fa752c 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -4754,3 +4754,49 @@ void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata,
 	ieee80211_xmit(sdata, NULL, skb);
 	local_bh_enable();
 }
+
+int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev,
+			      const u8 *buf, size_t len,
+			      const u8 *dest, u16 proto, bool unencrypted)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	struct sk_buff *skb;
+	struct ethhdr *ehdr;
+	u32 flags;
+
+	/* Only accept CONTROL_PORT_PROTOCOL configured in CONNECT/ASSOCIATE
+	 * or Pre-Authentication
+	 */
+	if (proto != sdata->control_port_protocol &&
+	    proto != cpu_to_be16(ETH_P_PREAUTH))
+		return -EINVAL;
+
+	if (unencrypted)
+		flags = IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	else
+		flags = 0;
+
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom +
+			    sizeof(struct ethhdr) + len);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_reserve(skb, local->hw.extra_tx_headroom + sizeof(struct ethhdr));
+
+	skb_put_data(skb, buf, len);
+
+	ehdr = skb_push(skb, sizeof(struct ethhdr));
+	memcpy(ehdr->h_dest, dest, ETH_ALEN);
+	memcpy(ehdr->h_source, sdata->vif.addr, ETH_ALEN);
+	ehdr->h_proto = proto;
+
+	skb->dev = dev;
+	skb->protocol = htons(ETH_P_802_3);
+	skb_reset_network_header(skb);
+	skb_reset_mac_header(skb);
+
+	__ieee80211_subif_start_xmit(skb, skb->dev, flags);
+
+	return 0;
+}
-- 
2.13.5

  parent reply	other threads:[~2018-01-31 21:33 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-31 21:33 [RFC v3 0/6] EAPoL over NL80211 Denis Kenzior
2018-01-31 21:33 ` [PATCH 1/6] uapi: Add 802.11 Preauthentication to if_ether Denis Kenzior
2018-01-31 21:33 ` [PATCH 2/6] nl80211: Add CONTROL_PORT_OVER_NL80211 attribute Denis Kenzior
2018-01-31 21:33 ` [PATCH 3/6] nl80211: Add CMD_CONTROL_PORT_FRAME API Denis Kenzior
2018-01-31 21:45   ` Johannes Berg
2018-01-31 22:01     ` Denis Kenzior
2018-01-31 22:03       ` Johannes Berg
2018-01-31 21:33 ` [PATCH 4/6] mac80211: Send control port frames over nl80211 Denis Kenzior
2018-01-31 21:50   ` Johannes Berg
2018-01-31 21:33 ` [PATCH 5/6] nl80211: Implement TX of control port frames Denis Kenzior
2018-01-31 21:52   ` Johannes Berg
2018-01-31 21:53   ` Johannes Berg
2018-01-31 21:58     ` Denis Kenzior
2018-01-31 22:00       ` Johannes Berg
2018-01-31 21:33 ` Denis Kenzior [this message]
2018-01-31 22:00 ` [RFC v3 0/6] EAPoL over NL80211 Johannes Berg
2018-02-01  1:09   ` Denis Kenzior
2018-02-01  8:54     ` Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180131213329.25322-7-denkenz@gmail.com \
    --to=denkenz@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).