[PATCH 0/3] Fix issues with connect and get_channel implementation

[PATCH 0/3] Fix issues with connect and get_channel implementation

[Ganapathi Bhat]

First change reverts one of our earlier patch, which did change
the hardware info stored in driver. Second patch improves the
first(reverted) patch. Third change adds a new command, which
fixes an issue with get_channel implementation. Three patches
needed to make sure the driver association are working as
expected.

Ganapathi Bhat (3):
  Revert "mwifiex: fix incorrect ht capability problem"
  mwifiex: fix incorrect ht capability problem
  mwifiex: get_channel from firmware

 drivers/net/wireless/marvell/mwifiex/11n.c         | 30 ++++++++++++
 drivers/net/wireless/marvell/mwifiex/cfg80211.c    | 40 ++++++++++------
 drivers/net/wireless/marvell/mwifiex/decl.h        | 17 +++++++
 drivers/net/wireless/marvell/mwifiex/fw.h          |  7 +++
 drivers/net/wireless/marvell/mwifiex/main.h        | 16 ++++++-
 drivers/net/wireless/marvell/mwifiex/sta_cmd.c     | 22 +++++++++
 drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c | 19 ++++++++
 drivers/net/wireless/marvell/mwifiex/sta_ioctl.c   | 56 +++++-----------------
 8 files changed, 148 insertions(+), 59 deletions(-)

-- 
1.9.1

[PATCH 1/3] Revert "mwifiex: fix incorrect ht capability problem"

[Ganapathi Bhat]

This reverts commit bcc920e8f08336cbbdcdba7c4449c27137e6b4b9.

Drivers gets hardware info and updates ht_cap field of
wiphy->bands during initialization. Once updated during init,
ht_cap must not be modified as it reflects the capability
supported by hardwawre. Above patch tries to modify the ht_cap
field and this results in wrongly advertising capabilities during
association.

Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
---
 drivers/net/wireless/marvell/mwifiex/sta_ioctl.c | 44 +-----------------------
 1 file changed, 1 insertion(+), 43 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c b/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
index a6077ab..ed66f12 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
@@ -146,7 +146,6 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv,
 	size_t beacon_ie_len;
 	struct mwifiex_bss_priv *bss_priv = (void *)bss->priv;
 	const struct cfg80211_bss_ies *ies;
-	int ret;
 
 	rcu_read_lock();
 	ies = rcu_dereference(bss->ies);
@@ -190,48 +189,7 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv,
 	if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_SPECTRUM_MGMT)
 		bss_desc->sensed_11h = true;
 
-	ret = mwifiex_update_bss_desc_with_ie(priv->adapter, bss_desc);
-	if (ret)
-		return ret;
-
-	/* Update HT40 capability based on current channel information */
-	if (bss_desc->bcn_ht_oper && bss_desc->bcn_ht_cap) {
-		u8 ht_param = bss_desc->bcn_ht_oper->ht_param;
-		u8 radio = mwifiex_band_to_radio_type(bss_desc->bss_band);
-		struct ieee80211_supported_band *sband =
-						priv->wdev.wiphy->bands[radio];
-		int freq = ieee80211_channel_to_frequency(bss_desc->channel,
-							  radio);
-		struct ieee80211_channel *chan =
-			ieee80211_get_channel(priv->adapter->wiphy, freq);
-
-		switch (ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
-		case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-			if (chan->flags & IEEE80211_CHAN_NO_HT40PLUS) {
-				sband->ht_cap.cap &=
-					~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
-				sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
-			} else {
-				sband->ht_cap.cap |=
-					IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-					IEEE80211_HT_CAP_SGI_40;
-			}
-			break;
-		case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-			if (chan->flags & IEEE80211_CHAN_NO_HT40MINUS) {
-				sband->ht_cap.cap &=
-					~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
-				sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
-			} else {
-				sband->ht_cap.cap |=
-					IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-					IEEE80211_HT_CAP_SGI_40;
-			}
-			break;
-		}
-	}
-
-	return 0;
+	return mwifiex_update_bss_desc_with_ie(priv->adapter, bss_desc);
 }
 
 void mwifiex_dnld_txpwr_table(struct mwifiex_private *priv)
-- 
1.9.1

[PATCH 2/3] mwifiex: fix incorrect ht capability problem

[Ganapathi Bhat]

IEEE80211_CHAN_NO_HT40PLUS and IEEE80211_CHAN_NO_HT40PLUS channel
flags tell if HT40 operation is allowed on a channel or not.

This patch ensures ht_capability information is modified
accordingly so that we don't end up creating a HT40 connection
when it's not allowed for current regulatory domain.

Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
---
 drivers/net/wireless/marvell/mwifiex/11n.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/11n.c b/drivers/net/wireless/marvell/mwifiex/11n.c
index 8772e39..feebfdc 100644
--- a/drivers/net/wireless/marvell/mwifiex/11n.c
+++ b/drivers/net/wireless/marvell/mwifiex/11n.c
@@ -341,6 +341,36 @@ int mwifiex_cmd_11n_cfg(struct mwifiex_private *priv,
 		       le16_to_cpu(ht_cap->header.len));
 
 		mwifiex_fill_cap_info(priv, radio_type, &ht_cap->ht_cap);
+		/* Update HT40 capability from current channel information */
+		if (bss_desc->bcn_ht_oper) {
+			u8 ht_param = bss_desc->bcn_ht_oper->ht_param;
+			u8 radio =
+			mwifiex_band_to_radio_type(bss_desc->bss_band);
+			int freq =
+			ieee80211_channel_to_frequency(bss_desc->channel,
+						       radio);
+			struct ieee80211_channel *chan =
+			ieee80211_get_channel(priv->adapter->wiphy, freq);
+
+			switch (ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				if (chan->flags & IEEE80211_CHAN_NO_HT40PLUS) {
+					ht_cap->ht_cap.cap_info &=
+					~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+					ht_cap->ht_cap.cap_info &=
+					~IEEE80211_HT_CAP_SGI_40;
+				}
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				if (chan->flags & IEEE80211_CHAN_NO_HT40MINUS) {
+					ht_cap->ht_cap.cap_info &=
+					~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+					ht_cap->ht_cap.cap_info &=
+					~IEEE80211_HT_CAP_SGI_40;
+				}
+				break;
+			}
+		}
 
 		*buffer += sizeof(struct mwifiex_ie_types_htcap);
 		ret_len += sizeof(struct mwifiex_ie_types_htcap);
-- 
1.9.1

[PATCH 3/3] mwifiex: get_channel from firmware

[Ganapathi Bhat]

At present driver gets chan_type by referring to
IEEE80211_HT_PARAM_CHA_SEC_OFFSET, in ASSOC response. Sometimes
AP shows IEEE80211_HT_PARAM_CHA_SEC_OFFSET as above/below in
assoc response, even if the association is done on HT20 channel
only. So, it will be accurate to get econdary channel offset from
firmware.

Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c    | 40 ++++++++++++++--------
 drivers/net/wireless/marvell/mwifiex/decl.h        | 17 +++++++++
 drivers/net/wireless/marvell/mwifiex/fw.h          |  7 ++++
 drivers/net/wireless/marvell/mwifiex/main.h        | 16 ++++++++-
 drivers/net/wireless/marvell/mwifiex/sta_cmd.c     | 22 ++++++++++++
 drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c | 19 ++++++++++
 drivers/net/wireless/marvell/mwifiex/sta_ioctl.c   | 12 +++++++
 7 files changed, 117 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index ce4432c..7f7e9de 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -95,18 +95,32 @@ u8 mwifiex_chan_type_to_sec_chan_offset(enum nl80211_channel_type chan_type)
 
 /* This function maps IEEE HT secondary channel type to NL80211 channel type
  */
-u8 mwifiex_sec_chan_offset_to_chan_type(u8 second_chan_offset)
+u8 mwifiex_get_chan_type(struct mwifiex_private *priv)
 {
-	switch (second_chan_offset) {
-	case IEEE80211_HT_PARAM_CHA_SEC_NONE:
-		return NL80211_CHAN_HT20;
-	case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-		return NL80211_CHAN_HT40PLUS;
-	case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-		return NL80211_CHAN_HT40MINUS;
-	default:
-		return NL80211_CHAN_HT20;
+	struct mwifiex_channel_band channel_band;
+	int ret;
+
+	ret = mwifiex_get_chan_info(priv, &channel_band);
+
+	if (!ret) {
+		switch (channel_band.band_config.chan_width) {
+		case CHAN_BW_20MHZ:
+			if (IS_11N_ENABLED(priv))
+				return NL80211_CHAN_HT20;
+			else
+				return NL80211_CHAN_NO_HT;
+		case CHAN_BW_40MHZ:
+			if (channel_band.band_config.chan2_offset ==
+			    SEC_CHAN_ABOVE)
+				return NL80211_CHAN_HT40PLUS;
+			else
+				return NL80211_CHAN_HT40MINUS;
+		default:
+			return NL80211_CHAN_HT20;
+		}
 	}
+
+	return NL80211_CHAN_HT20;
 }
 
 /*
@@ -3937,7 +3951,6 @@ static int mwifiex_cfg80211_get_channel(struct wiphy *wiphy,
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev);
 	struct mwifiex_bssdescriptor *curr_bss;
 	struct ieee80211_channel *chan;
-	u8 second_chan_offset;
 	enum nl80211_channel_type chan_type;
 	enum nl80211_band band;
 	int freq;
@@ -3954,10 +3967,7 @@ static int mwifiex_cfg80211_get_channel(struct wiphy *wiphy,
 		chan = ieee80211_get_channel(wiphy, freq);
 
 		if (priv->ht_param_present) {
-			second_chan_offset = priv->assoc_resp_ht_param &
-					IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
-			chan_type = mwifiex_sec_chan_offset_to_chan_type
-							(second_chan_offset);
+			chan_type = mwifiex_get_chan_type(priv);
 			cfg80211_chandef_create(chandef, chan, chan_type);
 		} else {
 			cfg80211_chandef_create(chandef, chan,
diff --git a/drivers/net/wireless/marvell/mwifiex/decl.h b/drivers/net/wireless/marvell/mwifiex/decl.h
index 188e4c3..46696ea 100644
--- a/drivers/net/wireless/marvell/mwifiex/decl.h
+++ b/drivers/net/wireless/marvell/mwifiex/decl.h
@@ -294,4 +294,21 @@ enum rdwr_status {
 	RDWR_STATUS_DONE = 2
 };
 
+enum mwifiex_chan_width {
+	CHAN_BW_20MHZ = 0,
+	CHAN_BW_10MHZ,
+	CHAN_BW_40MHZ,
+	CHAN_BW_80MHZ,
+	CHAN_BW_8080MHZ,
+	CHAN_BW_160MHZ,
+	CHAN_BW_5MHZ,
+};
+
+enum mwifiex_chan_offset {
+	SEC_CHAN_NONE = 0,
+	SEC_CHAN_ABOVE = 1,
+	SEC_CHAN_5MHZ = 2,
+	SEC_CHAN_BELOW = 3
+};
+
 #endif /* !_MWIFIEX_DECL_H_ */
diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h
index 9c2cdef..c5dc518 100644
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -411,6 +411,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define HostCmd_CMD_TDLS_OPER                         0x0122
 #define HostCmd_CMD_FW_DUMP_EVENT		      0x0125
 #define HostCmd_CMD_SDIO_SP_RX_AGGR_CFG               0x0223
+#define HostCmd_CMD_STA_CONFIGURE		      0x023f
 #define HostCmd_CMD_CHAN_REGION_CFG		      0x0242
 #define HostCmd_CMD_PACKET_AGGR_CTRL		      0x0251
 
@@ -2285,6 +2286,11 @@ struct host_cmd_ds_pkt_aggr_ctrl {
 	__le16 tx_aggr_align;
 } __packed;
 
+struct host_cmd_ds_sta_configure {
+	__le16 action;
+	u8 tlv_buffer[0];
+} __packed;
+
 struct host_cmd_ds_command {
 	__le16 command;
 	__le16 size;
@@ -2361,6 +2367,7 @@ struct host_cmd_ds_command {
 		struct host_cmd_ds_gtk_rekey_params rekey;
 		struct host_cmd_ds_chan_region_cfg reg_cfg;
 		struct host_cmd_ds_pkt_aggr_ctrl pkt_aggr_ctrl;
+		struct host_cmd_ds_sta_configure sta_cfg;
 	} params;
 } __packed;
 
diff --git a/drivers/net/wireless/marvell/mwifiex/main.h b/drivers/net/wireless/marvell/mwifiex/main.h
index f550528..19a23f8 100644
--- a/drivers/net/wireless/marvell/mwifiex/main.h
+++ b/drivers/net/wireless/marvell/mwifiex/main.h
@@ -517,6 +517,18 @@ enum mwifiex_iface_work_flags {
 	MWIFIEX_IFACE_WORK_CARD_RESET,
 };
 
+struct mwifiex_band_config {
+	u8 chan_band:2;
+	u8 chan_width:2;
+	u8 chan2_offset:2;
+	u8 scan_mode:2;
+} __packed;
+
+struct mwifiex_channel_band {
+	struct mwifiex_band_config band_config;
+	u8 channel;
+};
+
 struct mwifiex_private {
 	struct mwifiex_adapter *adapter;
 	u8 bss_type;
@@ -1546,7 +1558,7 @@ int mwifiex_check_network_compatibility(struct mwifiex_private *priv,
 					struct mwifiex_bssdescriptor *bss_desc);
 
 u8 mwifiex_chan_type_to_sec_chan_offset(enum nl80211_channel_type chan_type);
-u8 mwifiex_sec_chan_offset_to_chan_type(u8 second_chan_offset);
+u8 mwifiex_get_chan_type(struct mwifiex_private *priv);
 
 struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 					      const char *name,
@@ -1673,6 +1685,8 @@ u8 mwifiex_adjust_data_rate(struct mwifiex_private *priv,
 int mwifiex_get_wakeup_reason(struct mwifiex_private *priv, u16 action,
 			      int cmd_type,
 			      struct mwifiex_ds_wakeup_reason *wakeup_reason);
+int mwifiex_get_chan_info(struct mwifiex_private *priv,
+			  struct mwifiex_channel_band *channel_band);
 int mwifiex_ret_wakeup_reason(struct mwifiex_private *priv,
 			      struct host_cmd_ds_command *resp,
 			      struct host_cmd_ds_wakeup_reason *wakeup_reason);
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
index 211e47d..4ed10cf 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_cmd.c
@@ -1898,6 +1898,25 @@ static int mwifiex_cmd_get_wakeup_reason(struct mwifiex_private *priv,
 	return 0;
 }
 
+static int mwifiex_cmd_get_chan_info(struct host_cmd_ds_command *cmd,
+				     u16 cmd_action)
+{
+	struct host_cmd_ds_sta_configure *sta_cfg_cmd = &cmd->params.sta_cfg;
+	struct host_cmd_tlv_channel_band *tlv_band_channel =
+	(struct host_cmd_tlv_channel_band *)sta_cfg_cmd->tlv_buffer;
+
+	cmd->command = cpu_to_le16(HostCmd_CMD_STA_CONFIGURE);
+	cmd->size = cpu_to_le16(sizeof(*sta_cfg_cmd) +
+				sizeof(*tlv_band_channel) + S_DS_GEN);
+	sta_cfg_cmd->action = cpu_to_le16(cmd_action);
+	memset(tlv_band_channel, 0, sizeof(*tlv_band_channel));
+	tlv_band_channel->header.type = cpu_to_le16(TLV_TYPE_CHANNELBANDLIST);
+	tlv_band_channel->header.len  = cpu_to_le16(sizeof(*tlv_band_channel) -
+					sizeof(struct mwifiex_ie_types_header));
+
+	return 0;
+}
+
 /* This function check if the command is supported by firmware */
 static int mwifiex_is_cmd_supported(struct mwifiex_private *priv, u16 cmd_no)
 {
@@ -2210,6 +2229,9 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
 		cmd_ptr->command = cpu_to_le16(cmd_no);
 		cmd_ptr->size = cpu_to_le16(S_DS_GEN);
 		break;
+	case HostCmd_CMD_STA_CONFIGURE:
+		ret = mwifiex_cmd_get_chan_info(cmd_ptr, cmd_action);
+		break;
 	default:
 		mwifiex_dbg(priv->adapter, ERROR,
 			    "PREP_CMD: unknown cmd- %#x\n", cmd_no);
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c b/drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c
index 1bd4e13..69e3b62 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_cmdresp.c
@@ -1170,6 +1170,22 @@ static int mwifiex_ret_pkt_aggr_ctrl(struct mwifiex_private *priv,
 	return 0;
 }
 
+static int mwifiex_ret_get_chan_info(struct mwifiex_private *priv,
+				     struct host_cmd_ds_command *resp,
+				     struct mwifiex_channel_band *channel_band)
+{
+	struct host_cmd_ds_sta_configure *sta_cfg_cmd = &resp->params.sta_cfg;
+	struct host_cmd_tlv_channel_band *tlv_band_channel;
+
+	tlv_band_channel =
+	(struct host_cmd_tlv_channel_band *)sta_cfg_cmd->tlv_buffer;
+	memcpy(&channel_band->band_config, &tlv_band_channel->band_config,
+	       sizeof(struct mwifiex_band_config));
+	channel_band->channel = tlv_band_channel->channel;
+
+	return 0;
+}
+
 /*
  * This function handles the command responses.
  *
@@ -1393,6 +1409,9 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
 	case HostCmd_CMD_CHAN_REGION_CFG:
 		ret = mwifiex_ret_chan_region_cfg(priv, resp);
 		break;
+	case HostCmd_CMD_STA_CONFIGURE:
+		ret = mwifiex_ret_get_chan_info(priv, resp, data_buf);
+		break;
 	default:
 		mwifiex_dbg(adapter, ERROR,
 			    "CMD_RESP: unknown cmd response %#x\n",
diff --git a/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c b/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
index ed66f12..5414b75 100644
--- a/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/marvell/mwifiex/sta_ioctl.c
@@ -1481,3 +1481,15 @@ int mwifiex_get_wakeup_reason(struct mwifiex_private *priv, u16 action,
 
 	return status;
 }
+
+int mwifiex_get_chan_info(struct mwifiex_private *priv,
+			  struct mwifiex_channel_band *channel_band)
+{
+	int status = 0;
+
+	status = mwifiex_send_cmd(priv, HostCmd_CMD_STA_CONFIGURE,
+				  HostCmd_ACT_GEN_GET, 0, channel_band,
+				  MWIFIEX_SYNC_CMD);
+
+	return status;
+}
-- 
1.9.1

Re: [1/3] Revert "mwifiex: fix incorrect ht capability problem"

[Kalle Valo]

Ganapathi Bhat <gbhat@marvell.com> wrote:

> This reverts commit bcc920e8f08336cbbdcdba7c4449c27137e6b4b9.
> 
> Drivers gets hardware info and updates ht_cap field of
> wiphy->bands during initialization. Once updated during init,
> ht_cap must not be modified as it reflects the capability
> supported by hardwawre. Above patch tries to modify the ht_cap
> field and this results in wrongly advertising capabilities during
> association.
> 
> Signed-off-by: Cathy Luo <cluo@marvell.com>
> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

3 patches applied to wireless-drivers-next.git, thanks.

53a7094204b7 Revert "mwifiex: fix incorrect ht capability problem"
77423fa73927 mwifiex: fix incorrect ht capability problem
28bf8312a983 mwifiex: get_channel from firmware

-- 
https://patchwork.kernel.org/patch/10271595/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Re: [PATCH 2/3] mwifiex: fix incorrect ht capability problem

[Kalle Valo]

Ganapathi Bhat <gbhat@marvell.com> writes:

> IEEE80211_CHAN_NO_HT40PLUS and IEEE80211_CHAN_NO_HT40PLUS channel
> flags tell if HT40 operation is allowed on a channel or not.
>
> This patch ensures ht_capability information is modified
> accordingly so that we don't end up creating a HT40 connection
> when it's not allowed for current regulatory domain.
>
> Signed-off-by: Cathy Luo <cluo@marvell.com>
> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>

kbuild bot reported sparse warnings from this patch:

drivers/net/wireless/marvell/mwifiex/11n.c:358:65: sparse: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:358:65:    left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:358:65:    right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:360:65: sparse: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:360:65:    left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:360:65:    right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:366:65: sparse: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:366:65:    left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:366:65:    right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:368:65: sparse: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:368:65:    left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:368:65:    right side has type int

Please submit a followup patch to fix those.

-- 
Kalle Valo

RE: [EXT] Re: [PATCH 2/3] mwifiex: fix incorrect ht capability problem

[Ganapathi Bhat]

Hi Kalle,

> Ganapathi Bhat <gbhat@marvell.com> writes:
>
> > IEEE80211_CHAN_NO_HT40PLUS and IEEE80211_CHAN_NO_HT40PLUS
> channel
> > flags tell if HT40 operation is allowed on a channel or not.
> >
> > This patch ensures ht_capability information is modified accordingly
> > so that we don't end up creating a HT40 connection when it's not
> > allowed for current regulatory domain.
> >
> > Signed-off-by: Cathy Luo <cluo@marvell.com>
> > Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
>
> kbuild bot reported sparse warnings from this patch:
>
> drivers/net/wireless/marvell/mwifiex/11n.c:358:65: sparse: invalid
> assignment: &=
> drivers/net/wireless/marvell/mwifiex/11n.c:358:65:    left side has type
> restricted __le16
> drivers/net/wireless/marvell/mwifiex/11n.c:358:65:    right side has type int
> drivers/net/wireless/marvell/mwifiex/11n.c:360:65: sparse: invalid
> assignment: &=
> drivers/net/wireless/marvell/mwifiex/11n.c:360:65:    left side has type
> restricted __le16
> drivers/net/wireless/marvell/mwifiex/11n.c:360:65:    right side has type int
> drivers/net/wireless/marvell/mwifiex/11n.c:366:65: sparse: invalid
> assignment: &=
> drivers/net/wireless/marvell/mwifiex/11n.c:366:65:    left side has type
> restricted __le16
> drivers/net/wireless/marvell/mwifiex/11n.c:366:65:    right side has type int
> drivers/net/wireless/marvell/mwifiex/11n.c:368:65: sparse: invalid
> assignment: &=
> drivers/net/wireless/marvell/mwifiex/11n.c:368:65:    left side has type
> restricted __le16
> drivers/net/wireless/marvell/mwifiex/11n.c:368:65:    right side has type int
>
> Please submit a followup patch to fix those.
Sorry for the errors. Yes we have submitted a follow up fix.
>
> --
> Kalle Valo

Regards,
Ganapathi