From: <pkshih@realtek.com>
To: <kvalo@codeaurora.org>
Cc: <Larry.Finger@lwfinger.net>, <linux-wireless@vger.kernel.org>,
<stable@vger.kernel.org>
Subject: [PATCH v2] rtlwifi: cleanup 8723be ant_sel definition
Date: Fri, 20 Apr 2018 10:30:09 +0800 [thread overview]
Message-ID: <20180420023009.3182-1-pkshih@realtek.com> (raw)
From: Ping-Ke Shih <pkshih@realtek.com>
The module parameter ant_sel is used to control antenna number and path.
There is an existing enum ANT_{X2,X1} defined the antenna number, so
add a new enum ANT_{MAIN,AUX} to make it readable. After this work,
incorrect given values depend on ant_sel were exposed, so refill values
according following definition:
ant_sel ant_num ant_path print_label
1 ANT_X1 ANT_AUX #2
2 ANT_X2 ANT_MAIN #1
Then, a workaround resulted from the incorrect values in halbtcoutsrc.c was
removed. These is a existing bug in the workaround while ant_sel=2, but the
case is rare use so user is hard to observe this bug.
The experimental results with single antenna connected to specific path
are in following:
ant_sel ANT_MAIN(#1) ANT_AUX(#2)
0 -8 -62
1 -62 -10
2 -6 -60
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Cc: Stable <stable@vger.kernel.org> # 4.7+
Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net>
---
v2: Add more description about fixed bugs in end of first paragraph.
---
.../net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c | 15 ---------------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 11 +++++++----
drivers/net/wireless/realtek/rtlwifi/wifi.h | 5 +++++
3 files changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
index e0f9985582f9..738a7ea7dc4a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
@@ -158,16 +158,6 @@ static u8 halbtc_get_wifi_central_chnl(struct btc_coexist *btcoexist)
static u8 rtl_get_hwpg_single_ant_path(struct rtl_priv *rtlpriv)
{
- struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
-
- /* override ant_num / ant_path */
- if (mod_params->ant_sel) {
- rtlpriv->btcoexist.btc_info.ant_num =
- (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
-
- rtlpriv->btcoexist.btc_info.single_ant_path =
- (mod_params->ant_sel == 1 ? 0 : 1);
- }
return rtlpriv->btcoexist.btc_info.single_ant_path;
}
@@ -178,7 +168,6 @@ static u8 rtl_get_hwpg_bt_type(struct rtl_priv *rtlpriv)
static u8 rtl_get_hwpg_ant_num(struct rtl_priv *rtlpriv)
{
- struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
u8 num;
if (rtlpriv->btcoexist.btc_info.ant_num == ANT_X2)
@@ -186,10 +175,6 @@ static u8 rtl_get_hwpg_ant_num(struct rtl_priv *rtlpriv)
else
num = 1;
- /* override ant_num / ant_path */
- if (mod_params->ant_sel)
- num = (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1) + 1;
-
return num;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index e7bbbc95cdb1..b4f3f91b590e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -848,6 +848,9 @@ static bool _rtl8723be_init_mac(struct ieee80211_hw *hw)
return false;
}
+ if (rtlpriv->cfg->ops->get_btc_status())
+ rtlpriv->btcoexist.btc_ops->btc_power_on_setting(rtlpriv);
+
bytetmp = rtl_read_byte(rtlpriv, REG_MULTI_FUNC_CTRL);
rtl_write_byte(rtlpriv, REG_MULTI_FUNC_CTRL, bytetmp | BIT(3));
@@ -2696,21 +2699,21 @@ void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
rtlpriv->btcoexist.btc_info.ant_num = (value & 0x1);
rtlpriv->btcoexist.btc_info.single_ant_path =
- (value & 0x40); /*0xc3[6]*/
+ (value & 0x40 ? ANT_AUX : ANT_MAIN); /*0xc3[6]*/
} else {
rtlpriv->btcoexist.btc_info.btcoexist = 0;
rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
rtlpriv->btcoexist.btc_info.ant_num = ANT_X2;
- rtlpriv->btcoexist.btc_info.single_ant_path = 0;
+ rtlpriv->btcoexist.btc_info.single_ant_path = ANT_MAIN;
}
/* override ant_num / ant_path */
if (mod_params->ant_sel) {
rtlpriv->btcoexist.btc_info.ant_num =
- (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
+ (mod_params->ant_sel == 1 ? ANT_X1 : ANT_X2);
rtlpriv->btcoexist.btc_info.single_ant_path =
- (mod_params->ant_sel == 1 ? 0 : 1);
+ (mod_params->ant_sel == 1 ? ANT_AUX : ANT_MAIN);
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h
index c32985cfe48d..ab32a62ead81 100644
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -2882,6 +2882,11 @@ enum bt_ant_num {
ANT_X1 = 1,
};
+enum bt_ant_path {
+ ANT_MAIN = 0,
+ ANT_AUX = 1,
+};
+
enum bt_co_type {
BT_2WIRE = 0,
BT_ISSC_3WIRE = 1,
--
2.15.1
next reply other threads:[~2018-04-20 2:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-20 2:30 pkshih [this message]
2018-04-20 12:01 ` [PATCH v2] rtlwifi: cleanup 8723be ant_sel definition Kalle Valo
2018-04-20 20:56 ` Larry Finger
2018-04-23 2:19 ` Pkshih
2018-04-23 13:47 ` Kalle Valo
2018-04-23 16:09 ` Larry Finger
2018-04-24 10:16 ` [v2] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180420023009.3182-1-pkshih@realtek.com \
--to=pkshih@realtek.com \
--cc=Larry.Finger@lwfinger.net \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).