Re: [EXTERNAL] [PATCHv2 0/5] Runtime PM support for wlcore

[Tony Lindgren <tony@atomide.com>]

* Reizer, Eyal <eyalr@ti.com> [180521 07:31]:
> > Here's a series of patches to add runtime PM support for wlcore. It does not
> > yet implement autosuspend support, but let's get this tested first as the
> > autosuspend can mask enable/disable issues easily.
> 
> Testing on BBB+WL1837 cape, scan, recovery, down/up and basic traffic seems ok now.
> Of course we need to test some more.

Thanks for testing. Yes let's do more testing, no rush with these.
Hopefully they'll be ready for v4.19 merge window though.

> Standard suspend/resume seems to work ok as well.
> Ennabling wowlan and suspending is  crashing on resume. See below.
> 
> root@am335x-evm:/usr/share/wl18xx# iw phy0 wowlan enable any dme
> root@am335x-evm:/usr/share/wl18xx#
> root@am335x-evm:/usr/share/wl18xx# echo mem > /sys/power/state
> [  541.567039] PM: suspend entry (deep)
> [  541.570688] PM: Syncing filesystems ... done.
> [  541.594277] Freezing user space processes ... (elapsed 0.001 seconds) done.
> [  541.603160] OOM killer disabled.
> [  541.606738] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
> [  541.615984] Suspending console(s) (use no_console_suspend to debug)
> [  542.895091] pm33xx pm33xx: PM: Successfully put all powerdomains to target state
> [  542.895091] PM: Wakeup source UART
> [  542.919791] net eth0: initializing cpsw version 1.12 (0)
> [  543.017880] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
> [  543.027646] ------------[ cut here ]------------
> [  543.028023] WARNING: CPU: 0 PID: 932 at drivers/net/wireless/ti/wlcore/cmd.c:76 wlcore_cmd_send_failsafe+0x498/0x4f8 [wlcore]

This warning is because wlcore is wlcore is still in ELP. This is
somehow possible even though we call pm_runtime_get_sync() in
wl1271_op_resume(). Anyways, I'll try to reproduce it here.

Regards,

Tony