From: Erik Stromdahl <erik.stromdahl@gmail.com>
To: kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
ath10k@lists.infradead.org
Cc: Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [RFC v5 01/12] ath10k: add struct ath10k_bus_params
Date: Sun, 3 Jun 2018 20:20:18 +0200 [thread overview]
Message-ID: <20180603182029.8914-2-erik.stromdahl@gmail.com> (raw)
In-Reply-To: <20180603182029.8914-1-erik.stromdahl@gmail.com>
This struct is used as argument to ath10k_core_register in order to
make it easier to add more bus parameters in the future.
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
---
drivers/net/wireless/ath/ath10k/ahb.c | 8 ++++----
drivers/net/wireless/ath/ath10k/core.c | 5 +++--
drivers/net/wireless/ath/ath10k/core.h | 7 ++++++-
drivers/net/wireless/ath/ath10k/pci.c | 12 ++++++------
drivers/net/wireless/ath/ath10k/sdio.c | 7 ++++---
drivers/net/wireless/ath/ath10k/snoc.c | 4 +++-
drivers/net/wireless/ath/ath10k/usb.c | 6 +++---
7 files changed, 29 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index fa39ffffd34d..5e272e940efd 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -755,7 +755,7 @@ static int ath10k_ahb_probe(struct platform_device *pdev)
enum ath10k_hw_rev hw_rev;
size_t size;
int ret;
- u32 chip_id;
+ struct ath10k_bus_params bus_params;
of_id = of_match_device(ath10k_ahb_of_match, &pdev->dev);
if (!of_id) {
@@ -811,14 +811,14 @@ static int ath10k_ahb_probe(struct platform_device *pdev)
ath10k_pci_ce_deinit(ar);
- chip_id = ath10k_ahb_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
- if (chip_id == 0xffffffff) {
+ bus_params.chip_id = ath10k_ahb_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+ if (bus_params.chip_id == 0xffffffff) {
ath10k_err(ar, "failed to get chip id\n");
ret = -ENODEV;
goto err_halt_device;
}
- ret = ath10k_core_register(ar, chip_id);
+ ret = ath10k_core_register(ar, &bus_params);
if (ret) {
ath10k_err(ar, "failed to register driver core: %d\n", ret);
goto err_halt_device;
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 4cf54a7ef09a..eee6e39e4e99 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2702,9 +2702,10 @@ static void ath10k_core_register_work(struct work_struct *work)
return;
}
-int ath10k_core_register(struct ath10k *ar, u32 chip_id)
+int ath10k_core_register(struct ath10k *ar,
+ const struct ath10k_bus_params *bus_params)
{
- ar->chip_id = chip_id;
+ ar->chip_id = bus_params->chip_id;
queue_work(ar->workqueue, &ar->register_work);
return 0;
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 951dbdd1c9eb..6dd68df104e4 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -874,6 +874,10 @@ struct ath10k_per_peer_tx_stats {
u32 reserved2;
};
+struct ath10k_bus_params {
+ u32 chip_id;
+};
+
struct ath10k {
struct ath_common ath_common;
struct ieee80211_hw *hw;
@@ -1161,7 +1165,8 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
const struct ath10k_fw_components *fw_components);
int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt);
void ath10k_core_stop(struct ath10k *ar);
-int ath10k_core_register(struct ath10k *ar, u32 chip_id);
+int ath10k_core_register(struct ath10k *ar,
+ const struct ath10k_bus_params *bus_params);
void ath10k_core_unregister(struct ath10k *ar);
#endif /* _CORE_H_ */
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index af2cf55c4c1e..7b5b93f48ba2 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3482,7 +3482,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
struct ath10k *ar;
struct ath10k_pci *ar_pci;
enum ath10k_hw_rev hw_rev;
- u32 chip_id;
+ struct ath10k_bus_params bus_params;
bool pci_ps;
int (*pci_soft_reset)(struct ath10k *ar);
int (*pci_hard_reset)(struct ath10k *ar);
@@ -3618,19 +3618,19 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
goto err_free_irq;
}
- chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
- if (chip_id == 0xffffffff) {
+ bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+ if (bus_params.chip_id == 0xffffffff) {
ath10k_err(ar, "failed to get chip id\n");
goto err_free_irq;
}
- if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
+ if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
- pdev->device, chip_id);
+ pdev->device, bus_params.chip_id);
goto err_free_irq;
}
- ret = ath10k_core_register(ar, chip_id);
+ ret = ath10k_core_register(ar, &bus_params);
if (ret) {
ath10k_err(ar, "failed to register driver core: %d\n", ret);
goto err_free_irq;
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index d612ce8c9cff..be61d868edcf 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -1931,7 +1931,8 @@ static int ath10k_sdio_probe(struct sdio_func *func,
struct ath10k_sdio *ar_sdio;
struct ath10k *ar;
enum ath10k_hw_rev hw_rev;
- u32 chip_id, dev_id_base;
+ u32 dev_id_base;
+ struct ath10k_bus_params bus_params;
int ret, i;
/* Assumption: All SDIO based chipsets (so far) are QCA6174 based.
@@ -2026,8 +2027,8 @@ static int ath10k_sdio_probe(struct sdio_func *func,
}
/* TODO: don't know yet how to get chip_id with SDIO */
- chip_id = 0;
- ret = ath10k_core_register(ar, chip_id);
+ bus_params.chip_id = 0;
+ ret = ath10k_core_register(ar, &bus_params);
if (ret) {
ath10k_err(ar, "failed to register driver core: %d\n", ret);
goto err_free_wq;
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index a3a7042fe13a..46d2a7a21efb 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -1273,6 +1273,7 @@ static int ath10k_snoc_probe(struct platform_device *pdev)
struct ath10k *ar;
int ret;
u32 i;
+ struct ath10k_bus_params bus_params;
of_id = of_match_device(ath10k_snoc_dt_match, &pdev->dev);
if (!of_id) {
@@ -1340,7 +1341,8 @@ static int ath10k_snoc_probe(struct platform_device *pdev)
goto err_free_irq;
}
- ret = ath10k_core_register(ar, drv_data->hw_rev);
+ bus_params.chip_id = drv_data->hw_rev;
+ ret = ath10k_core_register(ar, &bus_params);
if (ret) {
ath10k_err(ar, "failed to register driver core: %d\n", ret);
goto err_hw_power_off;
diff --git a/drivers/net/wireless/ath/ath10k/usb.c b/drivers/net/wireless/ath/ath10k/usb.c
index d4803ff5a78a..275e00bafcb1 100644
--- a/drivers/net/wireless/ath/ath10k/usb.c
+++ b/drivers/net/wireless/ath/ath10k/usb.c
@@ -983,7 +983,7 @@ static int ath10k_usb_probe(struct usb_interface *interface,
struct usb_device *dev = interface_to_usbdev(interface);
int ret, vendor_id, product_id;
enum ath10k_hw_rev hw_rev;
- u32 chip_id;
+ struct ath10k_bus_params bus_params;
/* Assumption: All USB based chipsets (so far) are QCA9377 based.
* If there will be newer chipsets that does not use the hw reg
@@ -1017,8 +1017,8 @@ static int ath10k_usb_probe(struct usb_interface *interface,
ar->id.device = product_id;
/* TODO: don't know yet how to get chip_id with USB */
- chip_id = 0;
- ret = ath10k_core_register(ar, chip_id);
+ bus_params.chip_id = 0;
+ ret = ath10k_core_register(ar, &bus_params);
if (ret) {
ath10k_warn(ar, "failed to register driver core: %d\n", ret);
goto err;
--
2.17.0
next prev parent reply other threads:[~2018-06-03 18:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-03 18:20 [RFC v5 00/12] ath10k high latency Erik Stromdahl
2018-06-03 18:20 ` Erik Stromdahl [this message]
2018-09-06 16:16 ` [RFC v5 01/12] ath10k: add struct ath10k_bus_params Kalle Valo
[not found] ` <20180906161624.B4751606FA@smtp.codeaurora.org>
2018-09-06 18:22 ` Erik Stromdahl
2018-10-06 11:34 ` Kalle Valo
2018-06-03 18:20 ` [RFC v5 02/12] ath10k: add device type enum to ath10k_bus_params Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 03/12] ath10k: add bus type check in ath10k_init_hw_params Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 04/12] ath10k: use hw_params.num_peers for num_tids in TLV init Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 05/12] ath10k: add per target config of max_num_peers Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 06/12] ath10k: DMA related fixes for high latency devices Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 07/12] ath10k: add HTT TX HL ops Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 08/12] ath10k: add HTT RX " Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 09/12] ath10k: htt: RX ring config HL support Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 10/12] ath10k: htt: High latency TX support Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 11/12] ath10k: htt: High latency RX support Erik Stromdahl
2018-06-03 18:20 ` [RFC v5 12/12] ath10k: wmi: disable softirq's while calling ieee80211_rx Erik Stromdahl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180603182029.8914-2-erik.stromdahl@gmail.com \
--to=erik.stromdahl@gmail.com \
--cc=ath10k@lists.infradead.org \
--cc=kvalo@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).