From: Tony Lindgren <tony@atomide.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Eyal Reizer <eyalr@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>, Guy Mishol <guym@ti.com>,
Luca Coelho <luciano.coelho@intel.com>,
Maital Hahn <maitalm@ti.com>,
Maxim Altshul <maxim.altshul@ti.com>,
Shahar Patury <shaharp@ti.com>,
linux-wireless@vger.kernel.org, linux-omap@vger.kernel.org
Subject: [PATCHv4 0/8] Runtime PM support for wlcore
Date: Tue, 19 Jun 2018 02:43:34 -0700 [thread overview]
Message-ID: <20180619094342.81831-1-tony@atomide.com> (raw)
Hi all,
Here's the fourth version of wlcore runtime PM changes. Please
test one more time.
For testing, please make sure you have also applied patch
"[PATCHv2] wlcore: sdio: Fix flakey SDIO runtime PM handling"
to avoid bogus errors.
Regards,
Tony
Changes since v3:
- Fixed remaining known issues caused by changes to runtime PM
- Enabled autosuspend
Changes since v2:
- Add fix "wclore: Fix timout errors after recovery" that is not needed
before runtime PM conversion
- Add fix from Eyal for "wlcore: Use generic runtime pm calls for wowlan
elp configuration" that is also not needed before runtime PM conversion
- Return early from wlcore_runtime_resume() on ELP timeout to avoid
clearing WL1271_FLAG_IN_ELP bit
- Tag as RFT as we still need to do more testing and add runtime PM
autosuspend support before merging
- Drop "wlcore: sdio: Warn about runtime PM suspend errors" that should
no longer be needed
Changes since v1:
- Fix issues reported by Eyal for recovery
- Add few patches for enable/disable issues found when using runtime PM
- Remove unused ps.h includes
Eyal Reizer (1):
wlcore: Use generic runtime pm calls for wowlan elp configuration
Tony Lindgren (7):
wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()
wlcore: Make sure PM calls are paired
wlcore: Add support for runtime PM
wlcore: Fix misplaced PM call for scan_complete_work()
wclore: Fix timout errors after recovery
wlcore: Make sure firmware is initialized in wl1271_op_add_interface()
wlcore: Enable runtime PM autosuspend support
drivers/net/wireless/ti/wl18xx/debugfs.c | 29 +-
drivers/net/wireless/ti/wlcore/acx.c | 1 -
drivers/net/wireless/ti/wlcore/cmd.c | 10 +
drivers/net/wireless/ti/wlcore/debugfs.c | 90 ++--
drivers/net/wireless/ti/wlcore/main.c | 526 ++++++++++++++------
drivers/net/wireless/ti/wlcore/ps.c | 146 ------
drivers/net/wireless/ti/wlcore/ps.h | 3 -
drivers/net/wireless/ti/wlcore/scan.c | 13 +-
drivers/net/wireless/ti/wlcore/sysfs.c | 13 +-
drivers/net/wireless/ti/wlcore/testmode.c | 20 +-
drivers/net/wireless/ti/wlcore/tx.c | 10 +-
drivers/net/wireless/ti/wlcore/vendor_cmd.c | 30 +-
drivers/net/wireless/ti/wlcore/wlcore.h | 1 -
drivers/net/wireless/ti/wlcore/wlcore_i.h | 1 -
14 files changed, 512 insertions(+), 381 deletions(-)
--
2.17.1
next reply other threads:[~2018-06-19 9:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-19 9:43 Tony Lindgren [this message]
2018-06-19 9:43 ` [PATCH 1/8] wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout() Tony Lindgren
2018-06-27 15:46 ` [1/8] " Kalle Valo
2018-06-19 9:43 ` [PATCH 2/8] wlcore: Make sure PM calls are paired Tony Lindgren
2018-06-19 9:43 ` [PATCH 3/8] wlcore: Add support for runtime PM Tony Lindgren
2018-06-19 9:43 ` [PATCH 4/8] wlcore: Fix misplaced PM call for scan_complete_work() Tony Lindgren
2018-06-19 9:43 ` [PATCH 5/8] wclore: Fix timout errors after recovery Tony Lindgren
2018-06-27 15:41 ` [5/8] " Kalle Valo
[not found] ` <20180627154152.BCECB60714@smtp.codeaurora.org>
2018-06-28 9:07 ` Tony Lindgren
2018-06-28 9:19 ` Kalle Valo
2018-06-19 9:43 ` [PATCH 6/8] wlcore: Use generic runtime pm calls for wowlan elp configuration Tony Lindgren
2018-06-19 9:43 ` [PATCH 7/8] wlcore: Make sure firmware is initialized in wl1271_op_add_interface() Tony Lindgren
2018-06-19 9:43 ` [PATCH 8/8] wlcore: Enable runtime PM autosuspend support Tony Lindgren
2018-06-26 15:53 ` [PATCHv4 0/8] Runtime PM support for wlcore Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180619094342.81831-1-tony@atomide.com \
--to=tony@atomide.com \
--cc=eyalr@ti.com \
--cc=guym@ti.com \
--cc=kishon@ti.com \
--cc=kvalo@codeaurora.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luciano.coelho@intel.com \
--cc=maitalm@ti.com \
--cc=maxim.altshul@ti.com \
--cc=shaharp@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).