[PATCH v2 00/12] Add mt76x0 driver

[PATCH v2 00/12] Add mt76x0 driver

[Stanislaw Gruszka]

Add mt76x0 driver for MT7610U based USB dongles. Currently driver
support only STA mode.

mt76x0 is based on Jakub's mt7601u driver already included
in the kernel. I would like the driver be integrated as part
of mt76 (instead of separate driver in mediatek dir like mt7601u)
to utilize mt76 code for adding support for MT76x0 PCIe devices
in further development.

To do not collide with current mt76x2u work from Lorenzo, I did not
remove some code duplication. This will be done in the future, when
Lorenzo patches will be merged. I plan to do more close integration
with mt76x2u into common mt76 layer and add support for MT76x0 PCIe
devices (i.e. MT7630E). Any help with this work is obviously welcome.
My integration efforts can be traced here:
https://github.com/sgruszka/wireless-drivers-next/commits/mt76x0-draft

For full support mt7610.bin firmware blob is need, hopefully with 
the permission of Mediatek, the blob will be pushed into linux-firmware
git tree.

v1 -> v2:
 - add missed mac.c file!
 - fix uninitialized variables reported by kbuild test
 - fix rate estimation
 - check for skb allocation

Stanislaw Gruszka (12):
  mt76: add more states
  mt76x0: core files
  mt76x0: mac files
  mt76x0: usb files
  mt76x0: mcu files
  mt76x0: phy files
  mt76x0: init files
  mt76x0: eeprom files
  mt76x0: trace and debugfs files
  mt76x0: dma and tx files
  mt76x0: main file
  mt76: Kconfig and Makefile for mt76x0 driver

 drivers/net/wireless/mediatek/mt76/Kconfig         |    7 +
 drivers/net/wireless/mediatek/mt76/Makefile        |    1 +
 drivers/net/wireless/mediatek/mt76/mt76.h          |    4 +
 drivers/net/wireless/mediatek/mt76/mt76x0/Makefile |    7 +
 drivers/net/wireless/mediatek/mt76/mt76x0/core.c   |   34 +
 .../net/wireless/mediatek/mt76/mt76x0/debugfs.c    |  166 ++++
 drivers/net/wireless/mediatek/mt76/mt76x0/dma.c    |  522 ++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/dma.h    |  126 +++
 drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c |  445 +++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h |  149 +++
 drivers/net/wireless/mediatek/mt76/mt76x0/init.c   |  720 ++++++++++++++
 .../net/wireless/mediatek/mt76/mt76x0/initvals.h   |  282 ++++++
 .../wireless/mediatek/mt76/mt76x0/initvals_phy.h   |  772 +++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/mac.c    |  660 +++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/mac.h    |  154 +++
 drivers/net/wireless/mediatek/mt76/mt76x0/main.c   |  403 ++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c    |  655 +++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h    |  101 ++
 drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h |  376 ++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/phy.c    | 1008 ++++++++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/phy.h    |   81 ++
 drivers/net/wireless/mediatek/mt76/mt76x0/regs.h   |  651 +++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/trace.c  |   21 +
 drivers/net/wireless/mediatek/mt76/mt76x0/trace.h  |  366 +++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/tx.c     |  270 ++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/usb.c    |  377 ++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/usb.h    |   61 ++
 drivers/net/wireless/mediatek/mt76/mt76x0/util.c   |   42 +
 28 files changed, 8461 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/Makefile
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/core.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/debugfs.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/dma.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/dma.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/init.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/initvals_phy.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mac.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mac.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/main.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/phy.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/regs.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/trace.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/trace.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/tx.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/usb.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/util.c

-- 
1.9.3

[PATCH v2 01/12] mt76: add more states

[Stanislaw Gruszka]

Add states needed for mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 96e9798bb8a0..7b50d4b7f40e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -187,9 +187,13 @@ struct mt76_rx_tid {
 enum {
 	MT76_STATE_INITIALIZED,
 	MT76_STATE_RUNNING,
+	MT76_STATE_MCU_RUNNING,
 	MT76_SCANNING,
 	MT76_RESET,
 	MT76_OFFCHANNEL,
+	MT76_REMOVED,
+	MT76_READING_STATS,
+	MT76_MORE_STATS,
 };
 
 struct mt76_hw_cap {
-- 
1.9.3

[PATCH v2 02/12] mt76x0: core files

[Stanislaw Gruszka]

Core files of mt76x0 driver.

mt76x0 driver adds support for Mediatek MT7610U based
USB Wi-Fi dongles.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/core.c   |  34 ++
 drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h | 376 ++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/regs.h   | 651 +++++++++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/util.c   |  42 ++
 4 files changed, 1103 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/core.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/regs.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/util.c

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/core.c b/drivers/net/wireless/mediatek/mt76/mt76x0/core.c
new file mode 100644
index 000000000000..892803fce842
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/core.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt76x0.h"
+
+int mt76x0_wait_asic_ready(struct mt76x0_dev *dev)
+{
+	int i = 100;
+	u32 val;
+
+	do {
+		if (test_bit(MT76_REMOVED, &dev->mt76.state))
+			return -EIO;
+
+		val = mt76_rr(dev, MT_MAC_CSR0);
+		if (val && ~val)
+			return 0;
+
+		udelay(10);
+	} while (i--);
+
+	return -EIO;
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h b/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h
new file mode 100644
index 000000000000..069392a70606
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h
@@ -0,0 +1,376 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MT76X0U_H
+#define MT76X0U_H
+
+#include <linux/bitfield.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/usb.h>
+#include <linux/completion.h>
+#include <net/mac80211.h>
+#include <linux/debugfs.h>
+
+#include "../mt76.h"
+#include "regs.h"
+
+#define MT_CALIBRATE_INTERVAL		(4 * HZ)
+
+#define MT_FREQ_CAL_INIT_DELAY		(30 * HZ)
+#define MT_FREQ_CAL_CHECK_INTERVAL	(10 * HZ)
+#define MT_FREQ_CAL_ADJ_INTERVAL	(HZ / 2)
+
+#define MT_BBP_REG_VERSION		0x00
+
+#define MT_USB_AGGR_SIZE_LIMIT		21 /* * 1024B */
+#define MT_USB_AGGR_TIMEOUT		0x80 /* * 33ns */
+#define MT_RX_ORDER			3
+#define MT_RX_URB_SIZE			(PAGE_SIZE << MT_RX_ORDER)
+
+struct mt76x0_dma_buf {
+	struct urb *urb;
+	void *buf;
+	dma_addr_t dma;
+	size_t len;
+};
+
+struct mt76x0_mcu {
+	struct mutex mutex;
+
+	u8 msg_seq;
+
+	struct mt76x0_dma_buf resp;
+	struct completion resp_cmpl;
+
+	struct mt76_reg_pair *reg_pairs;
+	unsigned int reg_pairs_len;
+	u32 reg_base;
+	bool burst_read;
+};
+
+struct mac_stats {
+	u64 rx_stat[6];
+	u64 tx_stat[6];
+	u64 aggr_stat[2];
+	u64 aggr_n[32];
+	u64 zero_len_del[2];
+};
+
+#define N_RX_ENTRIES	16
+struct mt76x0_rx_queue {
+	struct mt76x0_dev *dev;
+
+	struct mt76x0_dma_buf_rx {
+		struct urb *urb;
+		struct page *p;
+	} e[N_RX_ENTRIES];
+
+	unsigned int start;
+	unsigned int end;
+	unsigned int entries;
+	unsigned int pending;
+};
+
+#define N_TX_ENTRIES	64
+
+struct mt76x0_tx_queue {
+	struct mt76x0_dev *dev;
+
+	struct mt76x0_dma_buf_tx {
+		struct urb *urb;
+		struct sk_buff *skb;
+	} e[N_TX_ENTRIES];
+
+	unsigned int start;
+	unsigned int end;
+	unsigned int entries;
+	unsigned int used;
+	unsigned int fifo_seq;
+};
+
+/* WCID allocation:
+ *     0: mcast wcid
+ *     1: bssid wcid
+ *  1...: STAs
+ * ...7e: group wcids
+ *    7f: reserved
+ */
+#define N_WCIDS		128
+#define GROUP_WCID(idx)	(254 - idx)
+
+struct mt76x0_eeprom_params;
+
+#define MT_EE_TEMPERATURE_SLOPE		39
+#define MT_FREQ_OFFSET_INVALID		-128
+
+/* addr req mask */
+#define MT_VEND_TYPE_EEPROM	BIT(31)
+#define MT_VEND_TYPE_CFG	BIT(30)
+#define MT_VEND_TYPE_MASK	(MT_VEND_TYPE_EEPROM | MT_VEND_TYPE_CFG)
+
+#define MT_VEND_ADDR(type, n)	(MT_VEND_TYPE_##type | (n))
+enum mt_vendor_req {
+	MT_VEND_DEV_MODE =	0x1,
+	MT_VEND_WRITE =		0x2,
+	MT_VEND_MULTI_WRITE =	0x6,
+	MT_VEND_MULTI_READ =	0x7,
+	MT_VEND_READ_EEPROM =	0x9,
+	MT_VEND_WRITE_FCE =	0x42,
+	MT_VEND_WRITE_CFG =	0x46,
+	MT_VEND_READ_CFG =	0x47,
+};
+
+enum mt_temp_mode {
+	MT_TEMP_MODE_NORMAL,
+	MT_TEMP_MODE_HIGH,
+	MT_TEMP_MODE_LOW,
+};
+
+enum mt_bw {
+	MT_BW_20,
+	MT_BW_40,
+};
+
+enum mt76_usb_in_ep {
+	MT_EP_IN_PKT_RX,
+	MT_EP_IN_CMD_RESP,
+	__MT_EP_IN_MAX,
+};
+
+enum mt76_usb_out_ep {
+	MT_EP_OUT_INBAND_CMD,
+	MT_EP_OUT_AC_BK,
+	MT_EP_OUT_AC_BE,
+	MT_EP_OUT_AC_VI,
+	MT_EP_OUT_AC_VO,
+	MT_EP_OUT_HCCA,
+	__MT_EP_OUT_MAX,
+};
+
+/* Map hardware queues to usb endpoints */
+static inline u8 q2ep(u8 qid)
+{
+	/* TODO: take management packets to queue 5 */
+	return qid + 1;
+}
+
+/* Hardware uses mirrored order of queues with Q3
+ * having the highest priority
+ */
+static inline u8 q2hwq(u8 q)
+{
+	return q ^ 0x3;
+}
+
+/**
+ * struct mt76x0_dev - adapter structure
+ * @lock:		protects @wcid->tx_rate.
+ * @mac_lock:		locks out mac80211's tx status and rx paths.
+ * @tx_lock:		protects @tx_q and changes of MT76_STATE_*_STATS
+ *			flags in @state.
+ * @rx_lock:		protects @rx_q.
+ * @con_mon_lock:	protects @ap_bssid, @bcn_*, @avg_rssi.
+ * @mutex:		ensures exclusive access from mac80211 callbacks.
+ * @reg_atomic_mutex:	ensures atomicity of indirect register accesses
+ *			(accesses to RF and BBP).
+ * @hw_atomic_mutex:	ensures exclusive access to HW during critical
+ *			operations (power management, channel switch).
+ */
+struct mt76x0_dev {
+	struct mt76_dev mt76; /* must be first */
+
+	struct mutex mutex;
+
+	struct mutex usb_ctrl_mtx;
+	u8 data[32];
+
+	struct tasklet_struct rx_tasklet;
+	struct tasklet_struct tx_tasklet;
+
+	u8 out_ep[__MT_EP_OUT_MAX];
+	u16 out_max_packet;
+	u8 in_ep[__MT_EP_IN_MAX];
+	u16 in_max_packet;
+
+	unsigned long wcid_mask[DIV_ROUND_UP(N_WCIDS, BITS_PER_LONG)];
+	unsigned long vif_mask;
+
+	struct mt76x0_mcu mcu;
+
+	struct delayed_work cal_work;
+	struct delayed_work mac_work;
+
+	struct workqueue_struct *stat_wq;
+	struct delayed_work stat_work;
+
+	struct mt76_wcid *mon_wcid;
+	struct mt76_wcid __rcu *wcid[N_WCIDS];
+
+	spinlock_t mac_lock;
+
+	const u16 *beacon_offsets;
+
+	u8 macaddr[ETH_ALEN];
+	struct mt76x0_eeprom_params *ee;
+
+	struct mutex reg_atomic_mutex;
+	struct mutex hw_atomic_mutex;
+
+	u32 rxfilter;
+	u32 debugfs_reg;
+
+	/* TX */
+	spinlock_t tx_lock;
+	struct mt76x0_tx_queue *tx_q;
+	struct sk_buff_head tx_skb_done;
+
+	atomic_t avg_ampdu_len;
+
+	/* RX */
+	spinlock_t rx_lock;
+	struct mt76x0_rx_queue rx_q;
+
+	/* Connection monitoring things */
+	spinlock_t con_mon_lock;
+	u8 ap_bssid[ETH_ALEN];
+
+	s8 bcn_freq_off;
+	u8 bcn_phy_mode;
+
+	int avg_rssi; /* starts at 0 and converges */
+
+	u8 agc_save;
+	u16 chainmask;
+
+	struct mac_stats stats;
+};
+
+struct mt76x0_wcid {
+	u8 idx;
+	u8 hw_key_idx;
+
+	u16 tx_rate;
+	bool tx_rate_set;
+	u8 tx_rate_nss;
+};
+
+struct mt76_vif {
+	u8 idx;
+
+	struct mt76_wcid group_wcid;
+};
+
+struct mt76_tx_status {
+	u8 valid:1;
+	u8 success:1;
+	u8 aggr:1;
+	u8 ack_req:1;
+	u8 is_probe:1;
+	u8 wcid;
+	u8 pktid;
+	u8 retry;
+	u16 rate;
+} __packed __aligned(2);
+
+struct mt76_sta {
+	struct mt76_wcid wcid;
+	struct mt76_tx_status status;
+	int n_frames;
+	u16 agg_ssn[IEEE80211_NUM_TIDS];
+};
+
+struct mt76_reg_pair {
+	u32 reg;
+	u32 value;
+};
+
+struct mt76x0_rxwi;
+
+extern const struct ieee80211_ops mt76x0_ops;
+
+static inline bool is_mt7610e(struct mt76x0_dev *dev)
+{
+	/* TODO */
+	return false;
+}
+
+void mt76x0_init_debugfs(struct mt76x0_dev *dev);
+
+int mt76x0_wait_asic_ready(struct mt76x0_dev *dev);
+
+/* Compatibility with mt76 */
+#define mt76_rmw_field(_dev, _reg, _field, _val)	\
+	mt76_rmw(_dev, _reg, _field, FIELD_PREP(_field, _val))
+
+int mt76x0_write_reg_pairs(struct mt76x0_dev *dev, u32 base,
+			    const struct mt76_reg_pair *data, int len);
+int mt76x0_read_reg_pairs(struct mt76x0_dev *dev, u32 base,
+			  struct mt76_reg_pair *data, int len);
+int mt76x0_burst_write_regs(struct mt76x0_dev *dev, u32 offset,
+			     const u32 *data, int n);
+void mt76x0_addr_wr(struct mt76x0_dev *dev, const u32 offset, const u8 *addr);
+
+/* Init */
+struct mt76x0_dev *mt76x0_alloc_device(struct device *dev);
+int mt76x0_init_hardware(struct mt76x0_dev *dev);
+int mt76x0_register_device(struct mt76x0_dev *dev);
+void mt76x0_cleanup(struct mt76x0_dev *dev);
+
+int mt76x0_mac_start(struct mt76x0_dev *dev);
+void mt76x0_mac_stop(struct mt76x0_dev *dev);
+
+/* PHY */
+void mt76x0_phy_init(struct mt76x0_dev *dev);
+int mt76x0_wait_bbp_ready(struct mt76x0_dev *dev);
+void mt76x0_agc_save(struct mt76x0_dev *dev);
+void mt76x0_agc_restore(struct mt76x0_dev *dev);
+int mt76x0_phy_set_channel(struct mt76x0_dev *dev,
+			    struct cfg80211_chan_def *chandef);
+void mt76x0_phy_recalibrate_after_assoc(struct mt76x0_dev *dev);
+int mt76x0_phy_get_rssi(struct mt76x0_dev *dev, struct mt76x0_rxwi *rxwi);
+void mt76x0_phy_con_cal_onoff(struct mt76x0_dev *dev,
+			       struct ieee80211_bss_conf *info);
+
+/* MAC */
+void mt76x0_mac_work(struct work_struct *work);
+void mt76x0_mac_set_protection(struct mt76x0_dev *dev, bool legacy_prot,
+				int ht_mode);
+void mt76x0_mac_set_short_preamble(struct mt76x0_dev *dev, bool short_preamb);
+void mt76x0_mac_config_tsf(struct mt76x0_dev *dev, bool enable, int interval);
+void
+mt76x0_mac_wcid_setup(struct mt76x0_dev *dev, u8 idx, u8 vif_idx, u8 *mac);
+void mt76x0_mac_set_ampdu_factor(struct mt76x0_dev *dev);
+
+/* TX */
+void mt76x0_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
+		struct sk_buff *skb);
+int mt76x0_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		    u16 queue, const struct ieee80211_tx_queue_params *params);
+void mt76x0_tx_status(struct mt76x0_dev *dev, struct sk_buff *skb);
+void mt76x0_tx_stat(struct work_struct *work);
+
+/* util */
+void mt76_remove_hdr_pad(struct sk_buff *skb);
+int mt76_insert_hdr_pad(struct sk_buff *skb);
+
+int mt76x0_dma_init(struct mt76x0_dev *dev);
+void mt76x0_dma_cleanup(struct mt76x0_dev *dev);
+
+int mt76x0_dma_enqueue_tx(struct mt76x0_dev *dev, struct sk_buff *skb,
+			   struct mt76_wcid *wcid, int hw_q);
+
+#endif
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/regs.h b/drivers/net/wireless/mediatek/mt76/mt76x0/regs.h
new file mode 100644
index 000000000000..16bed4aaa242
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/regs.h
@@ -0,0 +1,651 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT76_REGS_H
+#define __MT76_REGS_H
+
+#include <linux/bitops.h>
+
+#define MT_ASIC_VERSION			0x0000
+
+#define MT76XX_REV_E3		0x22
+#define MT76XX_REV_E4		0x33
+
+#define MT_CMB_CTRL			0x0020
+#define MT_CMB_CTRL_XTAL_RDY		BIT(22)
+#define MT_CMB_CTRL_PLL_LD		BIT(23)
+
+#define MT_EFUSE_CTRL			0x0024
+#define MT_EFUSE_CTRL_AOUT		GENMASK(5, 0)
+#define MT_EFUSE_CTRL_MODE		GENMASK(7, 6)
+#define MT_EFUSE_CTRL_LDO_OFF_TIME	GENMASK(13, 8)
+#define MT_EFUSE_CTRL_LDO_ON_TIME	GENMASK(15, 14)
+#define MT_EFUSE_CTRL_AIN		GENMASK(25, 16)
+#define MT_EFUSE_CTRL_KICK		BIT(30)
+#define MT_EFUSE_CTRL_SEL		BIT(31)
+
+#define MT_EFUSE_DATA_BASE		0x0028
+#define MT_EFUSE_DATA(_n)		(MT_EFUSE_DATA_BASE + ((_n) << 2))
+
+#define MT_COEXCFG0			0x0040
+#define MT_COEXCFG0_COEX_EN		BIT(0)
+
+#define MT_COEXCFG3			0x004c
+
+#define MT_LDO_CTRL_0			0x006c
+#define MT_LDO_CTRL_1			0x0070
+
+#define MT_WLAN_FUN_CTRL		0x0080
+#define MT_WLAN_FUN_CTRL_WLAN_EN	BIT(0)
+#define MT_WLAN_FUN_CTRL_WLAN_CLK_EN	BIT(1)
+#define MT_WLAN_FUN_CTRL_WLAN_RESET_RF	BIT(2)
+
+#define MT_WLAN_FUN_CTRL_WLAN_RESET	BIT(3) /* MT76x0 */
+#define MT_WLAN_FUN_CTRL_CSR_F20M_CKEN	BIT(3) /* MT76x2 */
+
+#define MT_WLAN_FUN_CTRL_PCIE_CLK_REQ	BIT(4)
+#define MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL	BIT(5)
+#define MT_WLAN_FUN_CTRL_INV_ANT_SEL	BIT(6)
+#define MT_WLAN_FUN_CTRL_WAKE_HOST	BIT(7)
+
+#define MT_WLAN_FUN_CTRL_THERM_RST	BIT(8) /* MT76x2 */
+#define MT_WLAN_FUN_CTRL_THERM_CKEN	BIT(9) /* MT76x2 */
+
+#define MT_WLAN_FUN_CTRL_GPIO_IN	GENMASK(15, 8) /* MT76x0 */
+#define MT_WLAN_FUN_CTRL_GPIO_OUT	GENMASK(23, 16) /* MT76x0 */
+#define MT_WLAN_FUN_CTRL_GPIO_OUT_EN	GENMASK(31, 24) /* MT76x0 */
+
+#define MT_XO_CTRL0			0x0100
+#define MT_XO_CTRL1			0x0104
+#define MT_XO_CTRL2			0x0108
+#define MT_XO_CTRL3			0x010c
+#define MT_XO_CTRL4			0x0110
+
+#define MT_XO_CTRL5			0x0114
+#define MT_XO_CTRL5_C2_VAL		GENMASK(14, 8)
+
+#define MT_XO_CTRL6			0x0118
+#define MT_XO_CTRL6_C2_CTRL		GENMASK(14, 8)
+
+#define MT_XO_CTRL7			0x011c
+
+#define MT_IOCFG_6			0x0124
+#define MT_WLAN_MTC_CTRL		0x10148
+#define MT_WLAN_MTC_CTRL_MTCMOS_PWR_UP	BIT(0)
+#define MT_WLAN_MTC_CTRL_PWR_ACK	BIT(12)
+#define MT_WLAN_MTC_CTRL_PWR_ACK_S	BIT(13)
+#define MT_WLAN_MTC_CTRL_BBP_MEM_PD	GENMASK(19, 16)
+#define MT_WLAN_MTC_CTRL_PBF_MEM_PD	BIT(20)
+#define MT_WLAN_MTC_CTRL_FCE_MEM_PD	BIT(21)
+#define MT_WLAN_MTC_CTRL_TSO_MEM_PD	BIT(22)
+#define MT_WLAN_MTC_CTRL_BBP_MEM_RB	BIT(24)
+#define MT_WLAN_MTC_CTRL_PBF_MEM_RB	BIT(25)
+#define MT_WLAN_MTC_CTRL_FCE_MEM_RB	BIT(26)
+#define MT_WLAN_MTC_CTRL_TSO_MEM_RB	BIT(27)
+#define MT_WLAN_MTC_CTRL_STATE_UP	BIT(28)
+
+#define MT_INT_SOURCE_CSR		0x0200
+#define MT_INT_MASK_CSR			0x0204
+
+#define MT_INT_RX_DONE(_n)		BIT(_n)
+#define MT_INT_RX_DONE_ALL		GENMASK(1, 0)
+#define MT_INT_TX_DONE_ALL		GENMASK(13, 4)
+#define MT_INT_TX_DONE(_n)		BIT(_n + 4)
+#define MT_INT_RX_COHERENT		BIT(16)
+#define MT_INT_TX_COHERENT		BIT(17)
+#define MT_INT_ANY_COHERENT		BIT(18)
+#define MT_INT_MCU_CMD			BIT(19)
+#define MT_INT_TBTT			BIT(20)
+#define MT_INT_PRE_TBTT			BIT(21)
+#define MT_INT_TX_STAT			BIT(22)
+#define MT_INT_AUTO_WAKEUP		BIT(23)
+#define MT_INT_GPTIMER			BIT(24)
+#define MT_INT_RXDELAYINT		BIT(26)
+#define MT_INT_TXDELAYINT		BIT(27)
+
+#define MT_WPDMA_GLO_CFG		0x0208
+#define MT_WPDMA_GLO_CFG_TX_DMA_EN	BIT(0)
+#define MT_WPDMA_GLO_CFG_TX_DMA_BUSY	BIT(1)
+#define MT_WPDMA_GLO_CFG_RX_DMA_EN	BIT(2)
+#define MT_WPDMA_GLO_CFG_RX_DMA_BUSY	BIT(3)
+#define MT_WPDMA_GLO_CFG_DMA_BURST_SIZE	GENMASK(5, 4)
+#define MT_WPDMA_GLO_CFG_TX_WRITEBACK_DONE	BIT(6)
+#define MT_WPDMA_GLO_CFG_BIG_ENDIAN	BIT(7)
+#define MT_WPDMA_GLO_CFG_HDR_SEG_LEN	GENMASK(15, 8)
+#define MT_WPDMA_GLO_CFG_CLK_GATE_DIS	BIT(30)
+#define MT_WPDMA_GLO_CFG_RX_2B_OFFSET	BIT(31)
+
+#define MT_WPDMA_RST_IDX		0x020c
+
+#define MT_WPDMA_DELAY_INT_CFG		0x0210
+
+#define MT_WMM_AIFSN		0x0214
+#define MT_WMM_AIFSN_MASK		GENMASK(3, 0)
+#define MT_WMM_AIFSN_SHIFT(_n)		((_n) * 4)
+
+#define MT_WMM_CWMIN		0x0218
+#define MT_WMM_CWMIN_MASK		GENMASK(3, 0)
+#define MT_WMM_CWMIN_SHIFT(_n)		((_n) * 4)
+
+#define MT_WMM_CWMAX		0x021c
+#define MT_WMM_CWMAX_MASK		GENMASK(3, 0)
+#define MT_WMM_CWMAX_SHIFT(_n)		((_n) * 4)
+
+#define MT_WMM_TXOP_BASE		0x0220
+#define MT_WMM_TXOP(_n)			(MT_WMM_TXOP_BASE + (((_n) / 2) << 2))
+#define MT_WMM_TXOP_SHIFT(_n)		((_n & 1) * 16)
+#define MT_WMM_TXOP_MASK		GENMASK(15, 0)
+
+#define MT_WMM_CTRL			0x0230 /* MT76x0 */
+
+#define MT_FCE_DMA_ADDR			0x0230
+#define MT_FCE_DMA_LEN			0x0234
+
+#define MT_USB_DMA_CFG			0x238
+#define MT_USB_DMA_CFG_RX_BULK_AGG_TOUT	GENMASK(7, 0)
+#define MT_USB_DMA_CFG_RX_BULK_AGG_LMT	GENMASK(15, 8)
+#define MT_USB_DMA_CFG_TX_WL_DROP	BIT(16)
+#define MT_USB_DMA_CFG_WAKEUP_EN	BIT(17)
+#define MT_USB_DMA_CFG_RX_DROP_OR_PADDING	BIT(18)
+#define MT_USB_DMA_CFG_TX_CLR		BIT(19)
+#define MT_USB_DMA_CFG_WL_LPK_EN	BIT(20)
+#define MT_USB_DMA_CFG_RX_BULK_AGG_EN	BIT(21)
+#define MT_USB_DMA_CFG_RX_BULK_EN	BIT(22)
+#define MT_USB_DMA_CFG_TX_BULK_EN	BIT(23)
+#define MT_USB_DMA_CFG_EP_OUT_VALID	GENMASK(29, 24)
+#define MT_USB_DMA_CFG_RX_BUSY		BIT(30)
+#define MT_USB_DMA_CFG_TX_BUSY		BIT(31)
+#if 0
+#define MT_USB_DMA_CFG_TX_CLR		BIT(19)
+#define MT_USB_DMA_CFG_TXOP_HALT	BIT(20)
+#define MT_USB_DMA_CFG_RX_BULK_AGG_EN	BIT(21)
+#define MT_USB_DMA_CFG_RX_BULK_EN	BIT(22)
+#define MT_USB_DMA_CFG_TX_BULK_EN	BIT(23)
+#define MT_USB_DMA_CFG_UDMA_RX_WL_DROP	BIT(25)
+#endif
+
+#define MT_TSO_CTRL			0x0250
+#define MT_HEADER_TRANS_CTRL_REG	0x0260
+
+#define MT_US_CYC_CFG			0x02a4
+#define MT_US_CYC_CNT			GENMASK(7, 0)
+
+#define MT_TX_RING_BASE			0x0300
+#define MT_RX_RING_BASE			0x03c0
+#define MT_RING_SIZE			0x10
+
+#define MT_TX_HW_QUEUE_MCU		8
+#define MT_TX_HW_QUEUE_MGMT		9
+
+#define MT_PBF_SYS_CTRL			0x0400
+#define MT_PBF_SYS_CTRL_MCU_RESET	BIT(0)
+#define MT_PBF_SYS_CTRL_DMA_RESET	BIT(1)
+#define MT_PBF_SYS_CTRL_MAC_RESET	BIT(2)
+#define MT_PBF_SYS_CTRL_PBF_RESET	BIT(3)
+#define MT_PBF_SYS_CTRL_ASY_RESET	BIT(4)
+
+#define MT_PBF_CFG			0x0404
+#define MT_PBF_CFG_TX0Q_EN		BIT(0)
+#define MT_PBF_CFG_TX1Q_EN		BIT(1)
+#define MT_PBF_CFG_TX2Q_EN		BIT(2)
+#define MT_PBF_CFG_TX3Q_EN		BIT(3)
+#define MT_PBF_CFG_RX0Q_EN		BIT(4)
+#define MT_PBF_CFG_RX_DROP_EN		BIT(8)
+
+#define MT_PBF_TX_MAX_PCNT		0x0408
+#define MT_PBF_RX_MAX_PCNT		0x040c
+
+#define MT_BCN_OFFSET_BASE		0x041c
+#define MT_BCN_OFFSET(_n)		(MT_BCN_OFFSET_BASE + ((_n) << 2))
+
+#define MT_RXQ_STA			0x0430
+#define MT_TXQ_STA			0x0434
+#define	MT_RF_CSR_CFG			0x0500
+#define MT_RF_CSR_CFG_DATA		GENMASK(7, 0)
+#define MT_RF_CSR_CFG_REG_ID		GENMASK(13, 8)
+#define MT_RF_CSR_CFG_REG_BANK		GENMASK(17, 14)
+#define MT_RF_CSR_CFG_WR		BIT(30)
+#define MT_RF_CSR_CFG_KICK		BIT(31)
+
+#define MT_RF_BYPASS_0			0x0504
+#define MT_RF_BYPASS_1			0x0508
+#define MT_RF_SETTING_0			0x050c
+
+#define MT_RF_MISC			0x0518
+#define MT_RF_DATA_WRITE		0x0524
+
+#define MT_RF_CTRL			0x0528
+#define MT_RF_CTRL_ADDR			GENMASK(11, 0)
+#define MT_RF_CTRL_WRITE		BIT(12)
+#define MT_RF_CTRL_BUSY			BIT(13)
+#define MT_RF_CTRL_IDX			BIT(16)
+
+#define MT_RF_DATA_READ			0x052c
+
+#define MT_COM_REG0			0x0730
+#define MT_COM_REG1			0x0734
+#define MT_COM_REG2			0x0738
+#define MT_COM_REG3			0x073C
+
+#define MT_FCE_PSE_CTRL			0x0800
+#define MT_FCE_PARAMETERS		0x0804
+#define MT_FCE_CSO			0x0808
+
+#define MT_FCE_L2_STUFF			0x080c
+#define MT_FCE_L2_STUFF_HT_L2_EN	BIT(0)
+#define MT_FCE_L2_STUFF_QOS_L2_EN	BIT(1)
+#define MT_FCE_L2_STUFF_RX_STUFF_EN	BIT(2)
+#define MT_FCE_L2_STUFF_TX_STUFF_EN	BIT(3)
+#define MT_FCE_L2_STUFF_WR_MPDU_LEN_EN	BIT(4)
+#define MT_FCE_L2_STUFF_MVINV_BSWAP	BIT(5)
+#define MT_FCE_L2_STUFF_TS_CMD_QSEL_EN	GENMASK(15, 8)
+#define MT_FCE_L2_STUFF_TS_LEN_EN	GENMASK(23, 16)
+#define MT_FCE_L2_STUFF_OTHER_PORT	GENMASK(25, 24)
+
+#define MT_FCE_WLAN_FLOW_CONTROL1	0x0824
+
+#define MT_TX_CPU_FROM_FCE_BASE_PTR	0x09a0
+#define MT_TX_CPU_FROM_FCE_MAX_COUNT	0x09a4
+#define MT_TX_CPU_FROM_FCE_CPU_DESC_IDX	0x09a8
+
+#define MT_FCE_PDMA_GLOBAL_CONF		0x09c4
+
+#define MT_PAUSE_ENABLE_CONTROL1	0x0a38
+
+#define MT_FCE_SKIP_FS			0x0a6c
+
+#define MT_MAC_CSR0			0x1000
+#define MT_MAC_SYS_CTRL			0x1004
+#define MT_MAC_SYS_CTRL_RESET_CSR	BIT(0)
+#define MT_MAC_SYS_CTRL_RESET_BBP	BIT(1)
+#define MT_MAC_SYS_CTRL_ENABLE_TX	BIT(2)
+#define MT_MAC_SYS_CTRL_ENABLE_RX	BIT(3)
+
+#define MT_MAC_ADDR_DW0			0x1008
+#define MT_MAC_ADDR_DW1			0x100c
+#define MT_MAC_ADDR_DW1_U2ME_MASK	GENMASK(23, 16)
+
+#define MT_MAC_BSSID_DW0		0x1010
+#define MT_MAC_BSSID_DW1		0x1014
+#define MT_MAC_BSSID_DW1_ADDR		GENMASK(15, 0)
+#define MT_MAC_BSSID_DW1_MBSS_MODE	GENMASK(17, 16)
+#define MT_MAC_BSSID_DW1_MBEACON_N	GENMASK(20, 18)
+#define MT_MAC_BSSID_DW1_MBSS_LOCAL_BIT	BIT(21)
+#define MT_MAC_BSSID_DW1_MBSS_MODE_B2	BIT(22)
+#define MT_MAC_BSSID_DW1_MBEACON_N_B3	BIT(23)
+#define MT_MAC_BSSID_DW1_MBSS_IDX_BYTE	GENMASK(26, 24)
+
+#define MT_MAX_LEN_CFG			0x1018
+#define MT_MAX_LEN_CFG_AMPDU		GENMASK(13, 12)
+
+#define MT_LED_CFG			0x102c
+
+#define MT_AMPDU_MAX_LEN_20M1S		0x1030
+#define MT_AMPDU_MAX_LEN_20M2S		0x1034
+#define MT_AMPDU_MAX_LEN_40M1S		0x1038
+#define MT_AMPDU_MAX_LEN_40M2S		0x103c
+#define MT_AMPDU_MAX_LEN		0x1040
+
+#define MT_WCID_DROP_BASE		0x106c
+#define MT_WCID_DROP(_n)		(MT_WCID_DROP_BASE + ((_n) >> 5) * 4)
+#define MT_WCID_DROP_MASK(_n)		BIT((_n) % 32)
+
+#define MT_BCN_BYPASS_MASK		0x108c
+
+#define MT_MAC_APC_BSSID_BASE		0x1090
+#define MT_MAC_APC_BSSID_L(_n)		(MT_MAC_APC_BSSID_BASE + ((_n) * 8))
+#define MT_MAC_APC_BSSID_H(_n)		(MT_MAC_APC_BSSID_BASE + ((_n) * 8 + 4))
+#define MT_MAC_APC_BSSID_H_ADDR		GENMASK(15, 0)
+#define MT_MAC_APC_BSSID0_H_EN		BIT(16)
+
+#define MT_XIFS_TIME_CFG		0x1100
+#define MT_XIFS_TIME_CFG_CCK_SIFS	GENMASK(7, 0)
+#define MT_XIFS_TIME_CFG_OFDM_SIFS	GENMASK(15, 8)
+#define MT_XIFS_TIME_CFG_OFDM_XIFS	GENMASK(19, 16)
+#define MT_XIFS_TIME_CFG_EIFS		GENMASK(28, 20)
+#define MT_XIFS_TIME_CFG_BB_RXEND_EN	BIT(29)
+
+#define MT_BKOFF_SLOT_CFG		0x1104
+#define MT_BKOFF_SLOT_CFG_SLOTTIME	GENMASK(7, 0)
+#define MT_BKOFF_SLOT_CFG_CC_DELAY	GENMASK(11, 8)
+
+#define MT_BEACON_TIME_CFG		0x1114
+#define MT_BEACON_TIME_CFG_INTVAL	GENMASK(15, 0)
+#define MT_BEACON_TIME_CFG_TIMER_EN	BIT(16)
+#define MT_BEACON_TIME_CFG_SYNC_MODE	GENMASK(18, 17)
+#define MT_BEACON_TIME_CFG_TBTT_EN	BIT(19)
+#define MT_BEACON_TIME_CFG_BEACON_TX	BIT(20)
+#define MT_BEACON_TIME_CFG_TSF_COMP	GENMASK(31, 24)
+
+#define MT_TBTT_SYNC_CFG		0x1118
+#define MT_TBTT_TIMER_CFG		0x1124
+
+#define MT_INT_TIMER_CFG		0x1128
+#define MT_INT_TIMER_CFG_PRE_TBTT	GENMASK(15, 0)
+#define MT_INT_TIMER_CFG_GP_TIMER	GENMASK(31, 16)
+
+#define MT_INT_TIMER_EN			0x112c
+#define MT_INT_TIMER_EN_PRE_TBTT_EN	BIT(0)
+#define MT_INT_TIMER_EN_GP_TIMER_EN	BIT(1)
+
+#define MT_MAC_STATUS			0x1200
+#define MT_MAC_STATUS_TX		BIT(0)
+#define MT_MAC_STATUS_RX		BIT(1)
+
+#define MT_PWR_PIN_CFG			0x1204
+#define MT_AUX_CLK_CFG			0x120c
+
+#define MT_BB_PA_MODE_CFG0		0x1214
+#define MT_BB_PA_MODE_CFG1		0x1218
+#define MT_RF_PA_MODE_CFG0		0x121c
+#define MT_RF_PA_MODE_CFG1		0x1220
+
+#define MT_RF_PA_MODE_ADJ0		0x1228
+#define MT_RF_PA_MODE_ADJ1		0x122c
+
+#define MT_DACCLK_EN_DLY_CFG		0x1264
+
+#define MT_EDCA_CFG_BASE		0x1300
+#define MT_EDCA_CFG_AC(_n)		(MT_EDCA_CFG_BASE + ((_n) << 2))
+#define MT_EDCA_CFG_TXOP		GENMASK(7, 0)
+#define MT_EDCA_CFG_AIFSN		GENMASK(11, 8)
+#define MT_EDCA_CFG_CWMIN		GENMASK(15, 12)
+#define MT_EDCA_CFG_CWMAX		GENMASK(19, 16)
+
+#define MT_TX_PWR_CFG_0			0x1314
+#define MT_TX_PWR_CFG_1			0x1318
+#define MT_TX_PWR_CFG_2			0x131c
+#define MT_TX_PWR_CFG_3			0x1320
+#define MT_TX_PWR_CFG_4			0x1324
+
+#define MT_TX_BAND_CFG			0x132c
+#define MT_TX_BAND_CFG_UPPER_40M	BIT(0)
+#define MT_TX_BAND_CFG_5G		BIT(1)
+#define MT_TX_BAND_CFG_2G		BIT(2)
+
+#define MT_HT_FBK_TO_LEGACY		0x1384
+#define MT_TX_MPDU_ADJ_INT		0x1388
+
+#define MT_TX_PWR_CFG_7			0x13d4
+#define MT_TX_PWR_CFG_8			0x13d8
+#define MT_TX_PWR_CFG_9			0x13dc
+
+#define MT_TX_SW_CFG0			0x1330
+#define MT_TX_SW_CFG1			0x1334
+#define MT_TX_SW_CFG2			0x1338
+
+#define MT_TXOP_CTRL_CFG		0x1340
+#define MT_TXOP_TRUN_EN			GENMASK(5, 0)
+#define MT_TXOP_EXT_CCA_DLY		GENMASK(15, 8)
+#define MT_TXOP_CTRL
+
+#define MT_TX_RTS_CFG			0x1344
+#define MT_TX_RTS_CFG_RETRY_LIMIT	GENMASK(7, 0)
+#define MT_TX_RTS_CFG_THRESH		GENMASK(23, 8)
+#define MT_TX_RTS_FALLBACK		BIT(24)
+
+#define MT_TX_TIMEOUT_CFG		0x1348
+#define MT_TX_RETRY_CFG			0x134c
+#define MT_TX_LINK_CFG			0x1350
+#define MT_HT_FBK_CFG0			0x1354
+#define MT_HT_FBK_CFG1			0x1358
+#define MT_LG_FBK_CFG0			0x135c
+#define MT_LG_FBK_CFG1			0x1360
+
+#define MT_CCK_PROT_CFG			0x1364
+#define MT_OFDM_PROT_CFG		0x1368
+#define MT_MM20_PROT_CFG		0x136c
+#define MT_MM40_PROT_CFG		0x1370
+#define MT_GF20_PROT_CFG		0x1374
+#define MT_GF40_PROT_CFG		0x1378
+
+#define MT_PROT_RATE			GENMASK(15, 0)
+#define MT_PROT_CTRL_RTS_CTS		BIT(16)
+#define MT_PROT_CTRL_CTS2SELF		BIT(17)
+#define MT_PROT_NAV_SHORT		BIT(18)
+#define MT_PROT_NAV_LONG		BIT(19)
+#define MT_PROT_TXOP_ALLOW_CCK		BIT(20)
+#define MT_PROT_TXOP_ALLOW_OFDM		BIT(21)
+#define MT_PROT_TXOP_ALLOW_MM20		BIT(22)
+#define MT_PROT_TXOP_ALLOW_MM40		BIT(23)
+#define MT_PROT_TXOP_ALLOW_GF20		BIT(24)
+#define MT_PROT_TXOP_ALLOW_GF40		BIT(25)
+#define MT_PROT_RTS_THR_EN		BIT(26)
+#define MT_PROT_RATE_CCK_11		0x0003
+#define MT_PROT_RATE_OFDM_6		0x4000
+#define MT_PROT_RATE_OFDM_24		0x4004
+#define MT_PROT_RATE_DUP_OFDM_24	0x4084
+#define MT_PROT_TXOP_ALLOW_ALL		GENMASK(25, 20)
+#define MT_PROT_TXOP_ALLOW_BW20		(MT_PROT_TXOP_ALLOW_ALL &	\
+					 ~MT_PROT_TXOP_ALLOW_MM40 &	\
+					 ~MT_PROT_TXOP_ALLOW_GF40)
+
+#define MT_EXP_ACK_TIME			0x1380
+
+#define MT_TX_PWR_CFG_0_EXT		0x1390
+#define MT_TX_PWR_CFG_1_EXT		0x1394
+
+#define MT_TX_FBK_LIMIT			0x1398
+#define MT_TX_FBK_LIMIT_MPDU_FBK	GENMASK(7, 0)
+#define MT_TX_FBK_LIMIT_AMPDU_FBK	GENMASK(15, 8)
+#define MT_TX_FBK_LIMIT_MPDU_UP_CLEAR	BIT(16)
+#define MT_TX_FBK_LIMIT_AMPDU_UP_CLEAR	BIT(17)
+#define MT_TX_FBK_LIMIT_RATE_LUT	BIT(18)
+
+#define MT_TX0_RF_GAIN_CORR		0x13a0
+#define MT_TX1_RF_GAIN_CORR		0x13a4
+#define MT_TX0_RF_GAIN_ATTEN		0x13a8
+
+#define MT_TX_ALC_CFG_0			0x13b0
+#define MT_TX_ALC_CFG_0_CH_INIT_0	GENMASK(5, 0)
+#define MT_TX_ALC_CFG_0_CH_INIT_1	GENMASK(13, 8)
+#define MT_TX_ALC_CFG_0_LIMIT_0		GENMASK(21, 16)
+#define MT_TX_ALC_CFG_0_LIMIT_1		GENMASK(29, 24)
+
+#define MT_TX_ALC_CFG_1			0x13b4
+#define MT_TX_ALC_CFG_1_TEMP_COMP	GENMASK(5, 0)
+
+#define MT_TX_ALC_CFG_2			0x13a8
+#define MT_TX_ALC_CFG_2_TEMP_COMP	GENMASK(5, 0)
+
+#define MT_TX0_BB_GAIN_ATTEN		0x13c0
+
+#define MT_TX_ALC_VGA3			0x13c8
+
+#define MT_TX_PROT_CFG6			0x13e0
+#define MT_TX_PROT_CFG7			0x13e4
+#define MT_TX_PROT_CFG8			0x13e8
+
+#define MT_PIFS_TX_CFG			0x13ec
+
+#define MT_RX_FILTR_CFG			0x1400
+
+#define MT_RX_FILTR_CFG_CRC_ERR		BIT(0)
+#define MT_RX_FILTR_CFG_PHY_ERR		BIT(1)
+#define MT_RX_FILTR_CFG_PROMISC		BIT(2)
+#define MT_RX_FILTR_CFG_OTHER_BSS	BIT(3)
+#define MT_RX_FILTR_CFG_VER_ERR		BIT(4)
+#define MT_RX_FILTR_CFG_MCAST		BIT(5)
+#define MT_RX_FILTR_CFG_BCAST		BIT(6)
+#define MT_RX_FILTR_CFG_DUP		BIT(7)
+#define MT_RX_FILTR_CFG_CFACK		BIT(8)
+#define MT_RX_FILTR_CFG_CFEND		BIT(9)
+#define MT_RX_FILTR_CFG_ACK		BIT(10)
+#define MT_RX_FILTR_CFG_CTS		BIT(11)
+#define MT_RX_FILTR_CFG_RTS		BIT(12)
+#define MT_RX_FILTR_CFG_PSPOLL		BIT(13)
+#define MT_RX_FILTR_CFG_BA		BIT(14)
+#define MT_RX_FILTR_CFG_BAR		BIT(15)
+#define MT_RX_FILTR_CFG_CTRL_RSV	BIT(16)
+
+#define MT_AUTO_RSP_CFG			0x1404
+
+#define MT_AUTO_RSP_PREAMB_SHORT	BIT(4)
+
+#define MT_LEGACY_BASIC_RATE		0x1408
+#define MT_HT_BASIC_RATE		0x140c
+#define MT_HT_CTRL_CFG			0x1410
+#define MT_RX_PARSER_CFG		0x1418
+#define MT_RX_PARSER_RX_SET_NAV_ALL	BIT(0)
+
+#define MT_EXT_CCA_CFG			0x141c
+#define MT_EXT_CCA_CFG_CCA0		GENMASK(1, 0)
+#define MT_EXT_CCA_CFG_CCA1		GENMASK(3, 2)
+#define MT_EXT_CCA_CFG_CCA2		GENMASK(5, 4)
+#define MT_EXT_CCA_CFG_CCA3		GENMASK(7, 6)
+#define MT_EXT_CCA_CFG_CCA_MASK		GENMASK(11, 8)
+#define MT_EXT_CCA_CFG_ED_CCA_MASK	GENMASK(15, 12)
+
+#define MT_TX_SW_CFG3			0x1478
+
+#define MT_PN_PAD_MODE			0x150c
+
+#define MT_TXOP_HLDR_ET			0x1608
+
+#define MT_PROT_AUTO_TX_CFG		0x1648
+
+#define MT_RX_STA_CNT0			0x1700
+#define MT_RX_STA_CNT1			0x1704
+#define MT_RX_STA_CNT2			0x1708
+#define MT_TX_STA_CNT0			0x170c
+#define MT_TX_STA_CNT1			0x1710
+#define MT_TX_STA_CNT2			0x1714
+
+/* Vendor driver defines content of the second word of STAT_FIFO as follows:
+ *	MT_TX_STAT_FIFO_RATE		GENMASK(26, 16)
+ *	MT_TX_STAT_FIFO_ETXBF		BIT(27)
+ *	MT_TX_STAT_FIFO_SND		BIT(28)
+ *	MT_TX_STAT_FIFO_ITXBF		BIT(29)
+ * However, tests show that b16-31 have the same layout as TXWI rate_ctl
+ * with rate set to rate at which frame was acked.
+ */
+#define MT_TX_STAT_FIFO			0x1718
+#define MT_TX_STAT_FIFO_VALID		BIT(0)
+#define MT_TX_STAT_FIFO_SUCCESS		BIT(5)
+#define MT_TX_STAT_FIFO_AGGR		BIT(6)
+#define MT_TX_STAT_FIFO_ACKREQ		BIT(7)
+#define MT_TX_STAT_FIFO_WCID		GENMASK(15, 8)
+#define MT_TX_STAT_FIFO_RATE		GENMASK(31, 16)
+
+#define MT_TX_AGG_STAT			0x171c
+
+#define MT_TX_AGG_CNT_BASE0		0x1720
+
+#define MT_MPDU_DENSITY_CNT		0x1740
+
+#define MT_TX_AGG_CNT_BASE1		0x174c
+
+#define MT_TX_AGG_CNT(_id)		((_id) < 8 ?			\
+					 MT_TX_AGG_CNT_BASE0 + ((_id) << 2) : \
+					 MT_TX_AGG_CNT_BASE1 + ((_id - 8) << 2))
+
+#define MT_TX_STAT_FIFO_EXT		0x1798
+#define MT_TX_STAT_FIFO_EXT_RETRY	GENMASK(7, 0)
+#define MT_TX_STAT_FIFO_EXT_PKTID	GENMASK(15, 8)
+
+#define MT_BBP_CORE_BASE		0x2000
+#define MT_BBP_IBI_BASE			0x2100
+#define MT_BBP_AGC_BASE			0x2300
+#define MT_BBP_TXC_BASE			0x2400
+#define MT_BBP_RXC_BASE			0x2500
+#define MT_BBP_TXO_BASE			0x2600
+#define MT_BBP_TXBE_BASE		0x2700
+#define MT_BBP_RXFE_BASE		0x2800
+#define MT_BBP_RXO_BASE			0x2900
+#define MT_BBP_DFS_BASE			0x2a00
+#define MT_BBP_TR_BASE			0x2b00
+#define MT_BBP_CAL_BASE			0x2c00
+#define MT_BBP_DSC_BASE			0x2e00
+#define MT_BBP_PFMU_BASE		0x2f00
+
+#define MT_BBP(_type, _n)		(MT_BBP_##_type##_BASE + ((_n) << 2))
+
+#define MT_BBP_CORE_R1_BW		GENMASK(4, 3)
+
+#define MT_BBP_AGC_R0_CTRL_CHAN		GENMASK(9, 8)
+#define MT_BBP_AGC_R0_BW		GENMASK(14, 12)
+
+/* AGC, R4/R5 */
+#define MT_BBP_AGC_LNA_GAIN		GENMASK(21, 16)
+
+/* AGC, R8/R9 */
+#define MT_BBP_AGC_GAIN			GENMASK(14, 8)
+
+#define MT_BBP_AGC20_RSSI0		GENMASK(7, 0)
+#define MT_BBP_AGC20_RSSI1		GENMASK(15, 8)
+
+#define MT_BBP_TXBE_R0_CTRL_CHAN	GENMASK(1, 0)
+
+#define MT_WCID_ADDR_BASE		0x1800
+#define MT_WCID_ADDR(_n)		(MT_WCID_ADDR_BASE + (_n) * 8)
+
+#define MT_SRAM_BASE			0x4000
+
+#define MT_WCID_KEY_BASE		0x8000
+#define MT_WCID_KEY(_n)			(MT_WCID_KEY_BASE + (_n) * 32)
+
+#define MT_WCID_IV_BASE			0xa000
+#define MT_WCID_IV(_n)			(MT_WCID_IV_BASE + (_n) * 8)
+
+#define MT_WCID_ATTR_BASE		0xa800
+#define MT_WCID_ATTR(_n)		(MT_WCID_ATTR_BASE + (_n) * 4)
+
+#define MT_WCID_ATTR_PAIRWISE		BIT(0)
+#define MT_WCID_ATTR_PKEY_MODE		GENMASK(3, 1)
+#define MT_WCID_ATTR_BSS_IDX		GENMASK(6, 4)
+#define MT_WCID_ATTR_RXWI_UDF		GENMASK(9, 7)
+#define MT_WCID_ATTR_PKEY_MODE_EXT	BIT(10)
+#define MT_WCID_ATTR_BSS_IDX_EXT	BIT(11)
+#define MT_WCID_ATTR_WAPI_MCBC		BIT(15)
+#define MT_WCID_ATTR_WAPI_KEYID		GENMASK(31, 24)
+
+#define MT_SKEY_BASE_0			0xac00
+#define MT_SKEY_BASE_1			0xb400
+#define MT_SKEY_0(_bss, _idx)		\
+	(MT_SKEY_BASE_0 + (4 * (_bss) + _idx) * 32)
+#define MT_SKEY_1(_bss, _idx)		\
+	(MT_SKEY_BASE_1 + (4 * ((_bss) & 7) + _idx) * 32)
+#define MT_SKEY(_bss, _idx)		\
+	((_bss & 8) ? MT_SKEY_1(_bss, _idx) : MT_SKEY_0(_bss, _idx))
+
+#define MT_SKEY_MODE_BASE_0		0xb000
+#define MT_SKEY_MODE_BASE_1		0xb3f0
+#define MT_SKEY_MODE_0(_bss)		\
+	(MT_SKEY_MODE_BASE_0 + ((_bss / 2) << 2))
+#define MT_SKEY_MODE_1(_bss)		\
+	(MT_SKEY_MODE_BASE_1 + ((((_bss) & 7) / 2) << 2))
+#define MT_SKEY_MODE(_bss)		\
+	((_bss & 8) ? MT_SKEY_MODE_1(_bss) : MT_SKEY_MODE_0(_bss))
+#define MT_SKEY_MODE_MASK		GENMASK(3, 0)
+#define MT_SKEY_MODE_SHIFT(_bss, _idx)	(4 * ((_idx) + 4 * (_bss & 1)))
+
+#define MT_BEACON_BASE			0xc000
+
+#define MT_TEMP_SENSOR			0x1d000
+#define MT_TEMP_SENSOR_VAL		GENMASK(6, 0)
+
+enum mt76_cipher_type {
+	MT_CIPHER_NONE,
+	MT_CIPHER_WEP40,
+	MT_CIPHER_WEP104,
+	MT_CIPHER_TKIP,
+	MT_CIPHER_AES_CCMP,
+	MT_CIPHER_CKIP40,
+	MT_CIPHER_CKIP104,
+	MT_CIPHER_CKIP128,
+	MT_CIPHER_WAPI,
+};
+
+#endif
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/util.c b/drivers/net/wireless/mediatek/mt76/mt76x0/util.c
new file mode 100644
index 000000000000..148be47d822f
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/util.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt76x0.h"
+
+void mt76_remove_hdr_pad(struct sk_buff *skb)
+{
+	int len = ieee80211_get_hdrlen_from_skb(skb);
+
+	memmove(skb->data + 2, skb->data, len);
+	skb_pull(skb, 2);
+}
+
+int mt76_insert_hdr_pad(struct sk_buff *skb)
+{
+	int len = ieee80211_get_hdrlen_from_skb(skb);
+	int ret;
+
+	if (len % 4 == 0)
+		return 0;
+
+	ret = skb_cow(skb, 2);
+	if (ret)
+		return ret;
+
+	skb_push(skb, 2);
+	memmove(skb->data, skb->data + 2, len);
+
+	skb->data[len] = 0;
+	skb->data[len + 1] = 0;
+	return 0;
+}
-- 
1.9.3

[PATCH v2 03/12] mt76x0: mac files

[Stanislaw Gruszka]

Add mac files of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/mac.c | 660 ++++++++++++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/mac.h | 154 ++++++
 2 files changed, 814 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mac.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mac.h

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/mac.c b/drivers/net/wireless/mediatek/mt76/mt76x0/mac.c
new file mode 100644
index 000000000000..7b32777c06e9
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/mac.c
@@ -0,0 +1,660 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt76x0.h"
+#include "trace.h"
+#include <linux/etherdevice.h>
+
+static void
+mt76_mac_process_tx_rate(struct ieee80211_tx_rate *txrate, u16 rate,
+			 enum nl80211_band band)
+{
+	u8 idx = FIELD_GET(MT_RXWI_RATE_INDEX, rate);
+
+	txrate->idx = 0;
+	txrate->flags = 0;
+	txrate->count = 1;
+
+	switch (FIELD_GET(MT_RXWI_RATE_PHY, rate)) {
+	case MT_PHY_TYPE_OFDM:
+		if (band == NL80211_BAND_2GHZ)
+			idx += 4;
+
+		txrate->idx = idx;
+		return;
+	case MT_PHY_TYPE_CCK:
+		if (idx >= 8)
+			idx -= 8;
+
+		txrate->idx = idx;
+		return;
+	case MT_PHY_TYPE_HT_GF:
+		txrate->flags |= IEEE80211_TX_RC_GREEN_FIELD;
+		/* fall through */
+	case MT_PHY_TYPE_HT:
+		txrate->flags |= IEEE80211_TX_RC_MCS;
+		txrate->idx = idx;
+		break;
+	case MT_PHY_TYPE_VHT:
+		txrate->flags |= IEEE80211_TX_RC_VHT_MCS;
+		txrate->idx = idx;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	switch (FIELD_GET(MT_RXWI_RATE_BW, rate)) {
+	case MT_PHY_BW_20:
+		break;
+	case MT_PHY_BW_40:
+		txrate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+		break;
+	case MT_PHY_BW_80:
+		txrate->flags |= IEEE80211_TX_RC_80_MHZ_WIDTH;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	if (rate & MT_RXWI_RATE_SGI)
+		txrate->flags |= IEEE80211_TX_RC_SHORT_GI;
+}
+
+static void
+mt76_mac_fill_tx_status(struct mt76x0_dev *dev, struct ieee80211_tx_info *info,
+			struct mt76_tx_status *st, int n_frames)
+{
+	struct ieee80211_tx_rate *rate = info->status.rates;
+	int cur_idx, last_rate;
+	int i;
+
+	if (!n_frames)
+		return;
+
+	last_rate = min_t(int, st->retry, IEEE80211_TX_MAX_RATES - 1);
+	mt76_mac_process_tx_rate(&rate[last_rate], st->rate,
+				 dev->mt76.chandef.chan->band);
+	if (last_rate < IEEE80211_TX_MAX_RATES - 1)
+		rate[last_rate + 1].idx = -1;
+
+	cur_idx = rate[last_rate].idx + last_rate;
+	for (i = 0; i <= last_rate; i++) {
+		rate[i].flags = rate[last_rate].flags;
+		rate[i].idx = max_t(int, 0, cur_idx - i);
+		rate[i].count = 1;
+	}
+
+	rate[last_rate - 1].count = st->retry + 1 - last_rate;
+
+	info->status.ampdu_len = n_frames;
+	info->status.ampdu_ack_len = st->success ? n_frames : 0;
+
+	if (st->pktid & MT_TXWI_PKTID_PROBE)
+		info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
+
+	if (st->aggr)
+		info->flags |= IEEE80211_TX_CTL_AMPDU |
+			       IEEE80211_TX_STAT_AMPDU;
+
+	if (!st->ack_req)
+		info->flags |= IEEE80211_TX_CTL_NO_ACK;
+	else if (st->success)
+		info->flags |= IEEE80211_TX_STAT_ACK;
+}
+
+u16 mt76_mac_tx_rate_val(struct mt76x0_dev *dev,
+			 const struct ieee80211_tx_rate *rate, u8 *nss_val)
+{
+	u16 rateval;
+	u8 phy, rate_idx;
+	u8 nss = 1;
+	u8 bw = 0;
+
+	if (rate->flags & IEEE80211_TX_RC_VHT_MCS) {
+		rate_idx = rate->idx;
+		nss = 1 + (rate->idx >> 4);
+		phy = MT_PHY_TYPE_VHT;
+		if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
+			bw = 2;
+		else if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+			bw = 1;
+	} else if (rate->flags & IEEE80211_TX_RC_MCS) {
+		rate_idx = rate->idx;
+		nss = 1 + (rate->idx >> 3);
+		phy = MT_PHY_TYPE_HT;
+		if (rate->flags & IEEE80211_TX_RC_GREEN_FIELD)
+			phy = MT_PHY_TYPE_HT_GF;
+		if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+			bw = 1;
+	} else {
+		const struct ieee80211_rate *r;
+		int band = dev->mt76.chandef.chan->band;
+		u16 val;
+
+		r = &dev->mt76.hw->wiphy->bands[band]->bitrates[rate->idx];
+		if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+			val = r->hw_value_short;
+		else
+			val = r->hw_value;
+
+		phy = val >> 8;
+		rate_idx = val & 0xff;
+		bw = 0;
+	}
+
+	rateval = FIELD_PREP(MT_RXWI_RATE_INDEX, rate_idx);
+	rateval |= FIELD_PREP(MT_RXWI_RATE_PHY, phy);
+	rateval |= FIELD_PREP(MT_RXWI_RATE_BW, bw);
+	if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
+		rateval |= MT_RXWI_RATE_SGI;
+
+	*nss_val = nss;
+	return cpu_to_le16(rateval);
+}
+
+void mt76_mac_wcid_set_rate(struct mt76x0_dev *dev, struct mt76_wcid *wcid,
+			    const struct ieee80211_tx_rate *rate)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->mt76.lock, flags);
+	wcid->tx_rate = mt76_mac_tx_rate_val(dev, rate, &wcid->tx_rate_nss);
+	wcid->tx_rate_set = true;
+	spin_unlock_irqrestore(&dev->mt76.lock, flags);
+}
+
+struct mt76_tx_status mt76x0_mac_fetch_tx_status(struct mt76x0_dev *dev)
+{
+	struct mt76_tx_status stat = {};
+	u32 stat2, stat1;
+
+	stat2 = mt76_rr(dev, MT_TX_STAT_FIFO_EXT);
+	stat1 = mt76_rr(dev, MT_TX_STAT_FIFO);
+
+	stat.valid = !!(stat1 & MT_TX_STAT_FIFO_VALID);
+	stat.success = !!(stat1 & MT_TX_STAT_FIFO_SUCCESS);
+	stat.aggr = !!(stat1 & MT_TX_STAT_FIFO_AGGR);
+	stat.ack_req = !!(stat1 & MT_TX_STAT_FIFO_ACKREQ);
+	stat.wcid = FIELD_GET(MT_TX_STAT_FIFO_WCID, stat1);
+	stat.rate = FIELD_GET(MT_TX_STAT_FIFO_RATE, stat1);
+
+	stat.retry = FIELD_GET(MT_TX_STAT_FIFO_EXT_RETRY, stat2);
+	stat.pktid = FIELD_GET(MT_TX_STAT_FIFO_EXT_PKTID, stat2);
+
+	return stat;
+}
+
+void mt76_send_tx_status(struct mt76x0_dev *dev, struct mt76_tx_status *stat, u8 *update)
+{
+	struct ieee80211_tx_info info = {};
+	struct ieee80211_sta *sta = NULL;
+	struct mt76_wcid *wcid = NULL;
+	struct mt76_sta *msta = NULL;
+
+	rcu_read_lock();
+	if (stat->wcid < ARRAY_SIZE(dev->wcid))
+		wcid = rcu_dereference(dev->wcid[stat->wcid]);
+
+	if (wcid) {
+		void *priv;
+		priv = msta = container_of(wcid, struct mt76_sta, wcid);
+		sta = container_of(priv, struct ieee80211_sta, drv_priv);
+	}
+
+	if (msta && stat->aggr) {
+		u32 stat_val, stat_cache;
+
+		stat_val = stat->rate;
+		stat_val |= ((u32) stat->retry) << 16;
+		stat_cache = msta->status.rate;
+		stat_cache |= ((u32) msta->status.retry) << 16;
+
+		if (*update == 0 && stat_val == stat_cache &&
+		    stat->wcid == msta->status.wcid && msta->n_frames < 32) {
+			msta->n_frames++;
+			goto out;
+		}
+
+		mt76_mac_fill_tx_status(dev, &info, &msta->status,
+					msta->n_frames);
+		msta->status = *stat;
+		msta->n_frames = 1;
+		*update = 0;
+	} else {
+		mt76_mac_fill_tx_status(dev, &info, stat, 1);
+		*update = 1;
+	}
+
+	spin_lock_bh(&dev->mac_lock);
+	ieee80211_tx_status_noskb(dev->mt76.hw, sta, &info);
+	spin_unlock_bh(&dev->mac_lock);
+out:
+	rcu_read_unlock();
+}
+
+void mt76x0_mac_set_protection(struct mt76x0_dev *dev, bool legacy_prot,
+				int ht_mode)
+{
+	int mode = ht_mode & IEEE80211_HT_OP_MODE_PROTECTION;
+	bool non_gf = !!(ht_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+	u32 prot[6];
+	bool ht_rts[4] = {};
+	int i;
+
+	prot[0] = MT_PROT_NAV_SHORT |
+		  MT_PROT_TXOP_ALLOW_ALL |
+		  MT_PROT_RTS_THR_EN;
+	prot[1] = prot[0];
+	if (legacy_prot)
+		prot[1] |= MT_PROT_CTRL_CTS2SELF;
+
+	prot[2] = prot[4] = MT_PROT_NAV_SHORT | MT_PROT_TXOP_ALLOW_BW20;
+	prot[3] = prot[5] = MT_PROT_NAV_SHORT | MT_PROT_TXOP_ALLOW_ALL;
+
+	if (legacy_prot) {
+		prot[2] |= MT_PROT_RATE_CCK_11;
+		prot[3] |= MT_PROT_RATE_CCK_11;
+		prot[4] |= MT_PROT_RATE_CCK_11;
+		prot[5] |= MT_PROT_RATE_CCK_11;
+	} else {
+		prot[2] |= MT_PROT_RATE_OFDM_24;
+		prot[3] |= MT_PROT_RATE_DUP_OFDM_24;
+		prot[4] |= MT_PROT_RATE_OFDM_24;
+		prot[5] |= MT_PROT_RATE_DUP_OFDM_24;
+	}
+
+	switch (mode) {
+	case IEEE80211_HT_OP_MODE_PROTECTION_NONE:
+		break;
+
+	case IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER:
+		ht_rts[0] = ht_rts[1] = ht_rts[2] = ht_rts[3] = true;
+		break;
+
+	case IEEE80211_HT_OP_MODE_PROTECTION_20MHZ:
+		ht_rts[1] = ht_rts[3] = true;
+		break;
+
+	case IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED:
+		ht_rts[0] = ht_rts[1] = ht_rts[2] = ht_rts[3] = true;
+		break;
+	}
+
+	if (non_gf)
+		ht_rts[2] = ht_rts[3] = true;
+
+	for (i = 0; i < 4; i++)
+		if (ht_rts[i])
+			prot[i + 2] |= MT_PROT_CTRL_RTS_CTS;
+
+	for (i = 0; i < 6; i++)
+		mt76_wr(dev, MT_CCK_PROT_CFG + i * 4, prot[i]);
+}
+
+void mt76x0_mac_set_short_preamble(struct mt76x0_dev *dev, bool short_preamb)
+{
+	if (short_preamb)
+		mt76_set(dev, MT_AUTO_RSP_CFG, MT_AUTO_RSP_PREAMB_SHORT);
+	else
+		mt76_clear(dev, MT_AUTO_RSP_CFG, MT_AUTO_RSP_PREAMB_SHORT);
+}
+
+void mt76x0_mac_config_tsf(struct mt76x0_dev *dev, bool enable, int interval)
+{
+	u32 val = mt76_rr(dev, MT_BEACON_TIME_CFG);
+
+	val &= ~(MT_BEACON_TIME_CFG_TIMER_EN |
+		 MT_BEACON_TIME_CFG_SYNC_MODE |
+		 MT_BEACON_TIME_CFG_TBTT_EN);
+
+	if (!enable) {
+		mt76_wr(dev, MT_BEACON_TIME_CFG, val);
+		return;
+	}
+
+	val &= ~MT_BEACON_TIME_CFG_INTVAL;
+	val |= FIELD_PREP(MT_BEACON_TIME_CFG_INTVAL, interval << 4) |
+		MT_BEACON_TIME_CFG_TIMER_EN |
+		MT_BEACON_TIME_CFG_SYNC_MODE |
+		MT_BEACON_TIME_CFG_TBTT_EN;
+}
+
+static void mt76x0_check_mac_err(struct mt76x0_dev *dev)
+{
+	u32 val = mt76_rr(dev, 0x10f4);
+
+	if (!(val & BIT(29)) || !(val & (BIT(7) | BIT(5))))
+		return;
+
+	dev_err(dev->mt76.dev, "Error: MAC specific condition occurred\n");
+
+	mt76_set(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_RESET_CSR);
+	udelay(10);
+	mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_RESET_CSR);
+}
+void mt76x0_mac_work(struct work_struct *work)
+{
+	struct mt76x0_dev *dev = container_of(work, struct mt76x0_dev,
+					       mac_work.work);
+	struct {
+		u32 addr_base;
+		u32 span;
+		u64 *stat_base;
+	} spans[] = {
+		{ MT_RX_STA_CNT0,	3,	dev->stats.rx_stat },
+		{ MT_TX_STA_CNT0,	3,	dev->stats.tx_stat },
+		{ MT_TX_AGG_STAT,	1,	dev->stats.aggr_stat },
+		{ MT_MPDU_DENSITY_CNT,	1,	dev->stats.zero_len_del },
+		{ MT_TX_AGG_CNT_BASE0,	8,	&dev->stats.aggr_n[0] },
+		{ MT_TX_AGG_CNT_BASE1,	8,	&dev->stats.aggr_n[16] },
+	};
+	u32 sum, n;
+	int i, j, k;
+
+	/* Note: using MCU_RANDOM_READ is actually slower then reading all the
+	 *	 registers by hand.  MCU takes ca. 20ms to complete read of 24
+	 *	 registers while reading them one by one will takes roughly
+	 *	 24*200us =~ 5ms.
+	 */
+
+	k = 0;
+	n = 0;
+	sum = 0;
+	for (i = 0; i < ARRAY_SIZE(spans); i++)
+		for (j = 0; j < spans[i].span; j++) {
+			u32 val = mt76_rr(dev, spans[i].addr_base + j * 4);
+
+			spans[i].stat_base[j * 2] += val & 0xffff;
+			spans[i].stat_base[j * 2 + 1] += val >> 16;
+
+			/* Calculate average AMPDU length */
+			if (spans[i].addr_base != MT_TX_AGG_CNT_BASE0 &&
+			    spans[i].addr_base != MT_TX_AGG_CNT_BASE1)
+				continue;
+
+			n += (val >> 16) + (val & 0xffff);
+			sum += (val & 0xffff) * (1 + k * 2) +
+				(val >> 16) * (2 + k * 2);
+			k++;
+		}
+
+	atomic_set(&dev->avg_ampdu_len, n ? DIV_ROUND_CLOSEST(sum, n) : 1);
+
+	mt76x0_check_mac_err(dev);
+
+	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->mac_work, 10 * HZ);
+}
+
+void
+mt76x0_mac_wcid_setup(struct mt76x0_dev *dev, u8 idx, u8 vif_idx, u8 *mac)
+{
+	u8 zmac[ETH_ALEN] = {};
+	u32 attr;
+
+	attr = FIELD_PREP(MT_WCID_ATTR_BSS_IDX, vif_idx & 7) |
+	       FIELD_PREP(MT_WCID_ATTR_BSS_IDX_EXT, !!(vif_idx & 8));
+
+	mt76_wr(dev, MT_WCID_ATTR(idx), attr);
+
+	if (mac)
+		memcpy(zmac, mac, sizeof(zmac));
+
+	mt76x0_addr_wr(dev, MT_WCID_ADDR(idx), zmac);
+}
+
+void mt76x0_mac_set_ampdu_factor(struct mt76x0_dev *dev)
+{
+	struct ieee80211_sta *sta;
+	struct mt76_wcid *wcid;
+	void *msta;
+	u8 min_factor = 3;
+	int i;
+
+	return;
+
+	rcu_read_lock();
+	for (i = 0; i < ARRAY_SIZE(dev->wcid); i++) {
+		wcid = rcu_dereference(dev->wcid[i]);
+		if (!wcid)
+			continue;
+
+		msta = container_of(wcid, struct mt76_sta, wcid);
+		sta = container_of(msta, struct ieee80211_sta, drv_priv);
+
+		min_factor = min(min_factor, sta->ht_cap.ampdu_factor);
+	}
+	rcu_read_unlock();
+
+	mt76_wr(dev, MT_MAX_LEN_CFG, 0xa0fff |
+		   FIELD_PREP(MT_MAX_LEN_CFG_AMPDU, min_factor));
+}
+
+static void
+mt76_mac_process_rate(struct ieee80211_rx_status *status, u16 rate)
+{
+	u8 idx = FIELD_GET(MT_RXWI_RATE_INDEX, rate);
+
+	switch (FIELD_GET(MT_RXWI_RATE_PHY, rate)) {
+	case MT_PHY_TYPE_OFDM:
+		if (idx >= 8)
+			idx = 0;
+
+		if (status->band == NL80211_BAND_2GHZ)
+			idx += 4;
+
+		status->rate_idx = idx;
+		return;
+	case MT_PHY_TYPE_CCK:
+		if (idx >= 8) {
+			idx -= 8;
+			status->enc_flags |= RX_ENC_FLAG_SHORTPRE;
+		}
+
+		if (idx >= 4)
+			idx = 0;
+
+		status->rate_idx = idx;
+		return;
+	case MT_PHY_TYPE_HT_GF:
+		status->enc_flags |= RX_ENC_FLAG_HT_GF;
+		/* fall through */
+	case MT_PHY_TYPE_HT:
+		status->encoding = RX_ENC_HT;
+		status->rate_idx = idx;
+		break;
+	case MT_PHY_TYPE_VHT:
+		status->encoding = RX_ENC_VHT;
+		status->rate_idx = FIELD_GET(MT_RATE_INDEX_VHT_IDX, idx);
+		status->nss = FIELD_GET(MT_RATE_INDEX_VHT_NSS, idx) + 1;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	if (rate & MT_RXWI_RATE_LDPC)
+		status->enc_flags |= RX_ENC_FLAG_LDPC;
+
+	if (rate & MT_RXWI_RATE_SGI)
+		status->enc_flags |= RX_ENC_FLAG_SHORT_GI;
+
+	if (rate & MT_RXWI_RATE_STBC)
+		status->enc_flags |= 1 << RX_ENC_FLAG_STBC_SHIFT;
+
+	switch (FIELD_GET(MT_RXWI_RATE_BW, rate)) {
+	case MT_PHY_BW_20:
+		break;
+	case MT_PHY_BW_40:
+		status->bw = RATE_INFO_BW_40;
+		break;
+	case MT_PHY_BW_80:
+		status->bw = RATE_INFO_BW_80;
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+}
+
+static void
+mt76x0_rx_monitor_beacon(struct mt76x0_dev *dev, struct mt76x0_rxwi *rxwi,
+			  u16 rate, int rssi)
+{
+	dev->bcn_phy_mode = FIELD_GET(MT_RXWI_RATE_PHY, rate);
+	dev->avg_rssi = ((dev->avg_rssi * 15) / 16 + (rssi << 8)) / 256;
+}
+
+static int
+mt76x0_rx_is_our_beacon(struct mt76x0_dev *dev, u8 *data)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)data;
+
+	return ieee80211_is_beacon(hdr->frame_control) &&
+		ether_addr_equal(hdr->addr2, dev->ap_bssid);
+}
+
+u32 mt76_mac_process_rx(struct mt76x0_dev *dev, struct sk_buff *skb,
+			u8 *data, void *rxi)
+{
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+	struct mt76x0_rxwi *rxwi = rxi;
+	u32 len, ctl = le32_to_cpu(rxwi->ctl);
+	u16 rate = le16_to_cpu(rxwi->rate);
+	int rssi;
+
+	len = FIELD_GET(MT_RXWI_CTL_MPDU_LEN, ctl);
+	if (WARN_ON(len < 10))
+		return 0;
+
+	if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_DECRYPT)) {
+		status->flag |= RX_FLAG_DECRYPTED;
+		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+	}
+
+	status->chains = BIT(0);
+	rssi = mt76x0_phy_get_rssi(dev, rxwi);
+	status->chain_signal[0] = status->signal = rssi;
+	status->freq = dev->mt76.chandef.chan->center_freq;
+	status->band = dev->mt76.chandef.chan->band;
+
+	mt76_mac_process_rate(status, rate);
+
+	spin_lock_bh(&dev->con_mon_lock);
+	if (mt76x0_rx_is_our_beacon(dev, data)) {
+		mt76x0_rx_monitor_beacon(dev, rxwi, rate, rssi);
+	} else if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_U2M)) {
+		if (dev->avg_rssi == 0)
+			dev->avg_rssi = rssi;
+		else
+			dev->avg_rssi = (dev->avg_rssi * 15) / 16 + rssi / 16;
+
+	}
+	spin_unlock_bh(&dev->con_mon_lock);
+
+	return len;
+}
+
+static enum mt76_cipher_type
+mt76_mac_get_key_info(struct ieee80211_key_conf *key, u8 *key_data)
+{
+	memset(key_data, 0, 32);
+	if (!key)
+		return MT_CIPHER_NONE;
+
+	if (key->keylen > 32)
+		return MT_CIPHER_NONE;
+
+	memcpy(key_data, key->key, key->keylen);
+
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+		return MT_CIPHER_WEP40;
+	case WLAN_CIPHER_SUITE_WEP104:
+		return MT_CIPHER_WEP104;
+	case WLAN_CIPHER_SUITE_TKIP:
+		return MT_CIPHER_TKIP;
+	case WLAN_CIPHER_SUITE_CCMP:
+		return MT_CIPHER_AES_CCMP;
+	default:
+		return MT_CIPHER_NONE;
+	}
+}
+
+int mt76_mac_wcid_set_key(struct mt76x0_dev *dev, u8 idx,
+			  struct ieee80211_key_conf *key)
+{
+	enum mt76_cipher_type cipher;
+	u8 key_data[32];
+	u8 iv_data[8];
+	u32 val;
+
+	cipher = mt76_mac_get_key_info(key, key_data);
+	if (cipher == MT_CIPHER_NONE && key)
+		return -EINVAL;
+
+	trace_set_key(&dev->mt76, idx);
+
+	mt76_wr_copy(dev, MT_WCID_KEY(idx), key_data, sizeof(key_data));
+
+	memset(iv_data, 0, sizeof(iv_data));
+	if (key) {
+		iv_data[3] = key->keyidx << 6;
+		if (cipher >= MT_CIPHER_TKIP) {
+			/* Note: start with 1 to comply with spec,
+			 *	 (see comment on common/cmm_wpa.c:4291).
+			 */
+			iv_data[0] |= 1;
+			iv_data[3] |= 0x20;
+		}
+	}
+	mt76_wr_copy(dev, MT_WCID_IV(idx), iv_data, sizeof(iv_data));
+
+	val = mt76_rr(dev, MT_WCID_ATTR(idx));
+	val &= ~MT_WCID_ATTR_PKEY_MODE & ~MT_WCID_ATTR_PKEY_MODE_EXT;
+	val |= FIELD_PREP(MT_WCID_ATTR_PKEY_MODE, cipher & 7) |
+	       FIELD_PREP(MT_WCID_ATTR_PKEY_MODE_EXT, cipher >> 3);
+	val &= ~MT_WCID_ATTR_PAIRWISE;
+	val |= MT_WCID_ATTR_PAIRWISE *
+		!!(key && key->flags & IEEE80211_KEY_FLAG_PAIRWISE);
+	mt76_wr(dev, MT_WCID_ATTR(idx), val);
+
+	return 0;
+}
+
+int mt76_mac_shared_key_setup(struct mt76x0_dev *dev, u8 vif_idx, u8 key_idx,
+			      struct ieee80211_key_conf *key)
+{
+	enum mt76_cipher_type cipher;
+	u8 key_data[32];
+	u32 val;
+
+	cipher = mt76_mac_get_key_info(key, key_data);
+	if (cipher == MT_CIPHER_NONE && key)
+		return -EINVAL;
+
+	trace_set_shared_key(&dev->mt76, vif_idx, key_idx);
+
+	mt76_wr_copy(dev, MT_SKEY(vif_idx, key_idx),
+			key_data, sizeof(key_data));
+
+	val = mt76_rr(dev, MT_SKEY_MODE(vif_idx));
+	val &= ~(MT_SKEY_MODE_MASK << MT_SKEY_MODE_SHIFT(vif_idx, key_idx));
+	val |= cipher << MT_SKEY_MODE_SHIFT(vif_idx, key_idx);
+	mt76_wr(dev, MT_SKEY_MODE(vif_idx), val);
+
+	return 0;
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/mac.h b/drivers/net/wireless/mediatek/mt76/mt76x0/mac.h
new file mode 100644
index 000000000000..947eba253553
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/mac.h
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT76_MAC_H
+#define __MT76_MAC_H
+
+/* Note: values in original "RSSI" and "SNR" fields are not actually what they
+ *	 are called for MT76X0U, names used by this driver are educated guesses
+ *	 (see vendor mac/ral_omac.c).
+ */
+struct mt76x0_rxwi {
+	__le32 rxinfo;
+
+	__le32 ctl;
+
+	__le16 tid_sn;
+	__le16 rate;
+
+	s8 rssi[4];
+
+	__le32 bbp_rxinfo[4];
+} __packed __aligned(4);
+
+#define MT_RXINFO_BA			BIT(0)
+#define MT_RXINFO_DATA			BIT(1)
+#define MT_RXINFO_NULL			BIT(2)
+#define MT_RXINFO_FRAG			BIT(3)
+#define MT_RXINFO_U2M			BIT(4)
+#define MT_RXINFO_MULTICAST		BIT(5)
+#define MT_RXINFO_BROADCAST		BIT(6)
+#define MT_RXINFO_MYBSS			BIT(7)
+#define MT_RXINFO_CRCERR		BIT(8)
+#define MT_RXINFO_ICVERR		BIT(9)
+#define MT_RXINFO_MICERR		BIT(10)
+#define MT_RXINFO_AMSDU			BIT(11)
+#define MT_RXINFO_HTC			BIT(12)
+#define MT_RXINFO_RSSI			BIT(13)
+#define MT_RXINFO_L2PAD			BIT(14)
+#define MT_RXINFO_AMPDU			BIT(15)
+#define MT_RXINFO_DECRYPT		BIT(16)
+#define MT_RXINFO_BSSIDX3		BIT(17)
+#define MT_RXINFO_WAPI_KEY		BIT(18)
+#define MT_RXINFO_PN_LEN		GENMASK(21, 19)
+#define MT_RXINFO_SW_PKT_80211		BIT(22)
+#define MT_RXINFO_TCP_SUM_BYPASS	BIT(28)
+#define MT_RXINFO_IP_SUM_BYPASS		BIT(29)
+#define MT_RXINFO_TCP_SUM_ERR		BIT(30)
+#define MT_RXINFO_IP_SUM_ERR		BIT(31)
+
+#define MT_RXWI_CTL_WCID		GENMASK(7, 0)
+#define MT_RXWI_CTL_KEY_IDX		GENMASK(9, 8)
+#define MT_RXWI_CTL_BSS_IDX		GENMASK(12, 10)
+#define MT_RXWI_CTL_UDF			GENMASK(15, 13)
+#define MT_RXWI_CTL_MPDU_LEN		GENMASK(27, 16)
+#define MT_RXWI_CTL_TID			GENMASK(31, 28)
+
+#define MT_RXWI_FRAG			GENMASK(3, 0)
+#define MT_RXWI_SN			GENMASK(15, 4)
+
+#define MT_RXWI_RATE_INDEX		GENMASK(5, 0)
+#define MT_RXWI_RATE_LDPC		BIT(6)
+#define MT_RXWI_RATE_BW			GENMASK(8, 7)
+#define MT_RXWI_RATE_SGI		BIT(9)
+#define MT_RXWI_RATE_STBC		BIT(10)
+#define MT_RXWI_RATE_LDPC_ETXBF		BIT(11)
+#define MT_RXWI_RATE_SND		BIT(12)
+#define MT_RXWI_RATE_PHY		GENMASK(15, 13)
+
+#define MT_RATE_INDEX_VHT_IDX		GENMASK(3, 0)
+#define MT_RATE_INDEX_VHT_NSS		GENMASK(5, 4)
+
+#define MT_RXWI_GAIN_RSSI_VAL		GENMASK(5, 0)
+#define MT_RXWI_GAIN_RSSI_LNA_ID	GENMASK(7, 6)
+#define MT_RXWI_ANT_AUX_LNA		BIT(7)
+
+#define MT_RXWI_EANT_ENC_ANT_ID		GENMASK(7, 0)
+
+enum mt76_phy_bandwidth {
+	MT_PHY_BW_20,
+	MT_PHY_BW_40,
+	MT_PHY_BW_80,
+};
+
+struct mt76_txwi {
+	__le16 flags;
+	__le16 rate_ctl;
+	u8 ack_ctl;
+	u8 wcid;
+	__le16 len_ctl;
+	__le32 iv;
+	__le32 eiv;
+	u8 aid;
+	u8 txstream;
+	u8 ctl2;
+	u8 pktid;
+} __packed __aligned(4);
+
+#define MT_TXWI_FLAGS_FRAG		BIT(0)
+#define MT_TXWI_FLAGS_MMPS		BIT(1)
+#define MT_TXWI_FLAGS_CFACK		BIT(2)
+#define MT_TXWI_FLAGS_TS		BIT(3)
+#define MT_TXWI_FLAGS_AMPDU		BIT(4)
+#define MT_TXWI_FLAGS_MPDU_DENSITY	GENMASK(7, 5)
+#define MT_TXWI_FLAGS_TXOP		GENMASK(9, 8)
+#define MT_TXWI_FLAGS_CWMIN		GENMASK(12, 10)
+#define MT_TXWI_FLAGS_NO_RATE_FALLBACK	BIT(13)
+#define MT_TXWI_FLAGS_TX_RPT		BIT(14)
+#define MT_TXWI_FLAGS_TX_RATE_LUT	BIT(15)
+
+#define MT_TXWI_RATE_MCS		GENMASK(6, 0)
+#define MT_TXWI_RATE_BW			BIT(7)
+#define MT_TXWI_RATE_SGI		BIT(8)
+#define MT_TXWI_RATE_STBC		GENMASK(10, 9)
+#define MT_TXWI_RATE_PHY_MODE		GENMASK(15, 14)
+
+#define MT_TXWI_ACK_CTL_REQ		BIT(0)
+#define MT_TXWI_ACK_CTL_NSEQ		BIT(1)
+#define MT_TXWI_ACK_CTL_BA_WINDOW	GENMASK(7, 2)
+
+#define MT_TXWI_LEN_BYTE_CNT		GENMASK(11, 0)
+
+#define MT_TXWI_CTL_TX_POWER_ADJ	GENMASK(3, 0)
+#define MT_TXWI_CTL_CHAN_CHECK_PKT	BIT(4)
+#define MT_TXWI_CTL_PIFS_REV		BIT(6)
+
+#define MT_TXWI_PKTID_PROBE             BIT(7)
+
+u32 mt76_mac_process_rx(struct mt76x0_dev *dev, struct sk_buff *skb,
+			u8 *data, void *rxi);
+int mt76_mac_wcid_set_key(struct mt76x0_dev *dev, u8 idx,
+			  struct ieee80211_key_conf *key);
+void mt76_mac_wcid_set_rate(struct mt76x0_dev *dev, struct mt76_wcid *wcid,
+			    const struct ieee80211_tx_rate *rate);
+
+int mt76_mac_shared_key_setup(struct mt76x0_dev *dev, u8 vif_idx, u8 key_idx,
+			      struct ieee80211_key_conf *key);
+u16 mt76_mac_tx_rate_val(struct mt76x0_dev *dev,
+			 const struct ieee80211_tx_rate *rate, u8 *nss_val);
+struct mt76_tx_status
+mt76x0_mac_fetch_tx_status(struct mt76x0_dev *dev);
+void mt76_send_tx_status(struct mt76x0_dev *dev, struct mt76_tx_status *stat, u8 *update);
+
+#endif
-- 
1.9.3

[PATCH v2 04/12] mt76x0: usb files

[Stanislaw Gruszka]

Add usb files of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 377 ++++++++++++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/usb.h |  61 ++++
 2 files changed, 438 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/usb.h

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
new file mode 100644
index 000000000000..0871fdef59c3
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
@@ -0,0 +1,377 @@
+/*
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "mt76x0.h"
+#include "usb.h"
+#include "trace.h"
+
+static struct usb_device_id mt76x0_device_table[] = {
+	{ USB_DEVICE(0x148F, 0x7610) },	/* MT7610U */
+	{ USB_DEVICE(0x13B1, 0x003E) },	/* Linksys AE6000 */
+	{ USB_DEVICE(0x0E8D, 0x7610) },	/* Sabrent NTWLAC */
+	{ USB_DEVICE(0x7392, 0xa711) },	/* Edimax 7711mac */
+	{ USB_DEVICE(0x7392, 0xb711) },	/* Edimax / Elecom  */
+	{ USB_DEVICE(0x148f, 0x761a) },	/* TP-Link TL-WDN5200 */
+	{ USB_DEVICE(0x148f, 0x760a) },	/* TP-Link unknown */
+	{ USB_DEVICE(0x0b05, 0x17d1) },	/* Asus USB-AC51 */
+	{ USB_DEVICE(0x0b05, 0x17db) },	/* Asus USB-AC50 */
+	{ USB_DEVICE(0x0df6, 0x0075) },	/* Sitecom WLA-3100 */
+	{ USB_DEVICE(0x2019, 0xab31) },	/* Planex GW-450D */
+	{ USB_DEVICE(0x2001, 0x3d02) },	/* D-LINK DWA-171 rev B1 */
+	{ USB_DEVICE(0x0586, 0x3425) },	/* Zyxel NWD6505 */
+	{ USB_DEVICE(0x07b8, 0x7610) },	/* AboCom AU7212 */
+	{ USB_DEVICE(0x04bb, 0x0951) },	/* I-O DATA WN-AC433UK */
+	{ USB_DEVICE(0x057c, 0x8502) },	/* AVM FRITZ!WLAN USB Stick AC 430 */
+	{ USB_DEVICE(0x293c, 0x5702) },	/* Comcast Xfinity KXW02AAA  */
+	{ USB_DEVICE(0x20f4, 0x806b) },	/* TRENDnet TEW-806UBH  */
+	{ USB_DEVICE(0x7392, 0xc711) }, /* Devolo Wifi ac Stick */
+	{ USB_DEVICE(0x0df6, 0x0079) }, /* Sitecom Europe B.V. ac  Stick */
+	{ USB_DEVICE(0x2357, 0x0105) }, /* TP-LINK Archer T1U */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7630, 0xff, 0x2, 0xff)}, /* MT7630U */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7650, 0xff, 0x2, 0xff)}, /* MT7650U */
+	{ 0, }
+};
+
+bool mt76x0_usb_alloc_buf(struct mt76x0_dev *dev, size_t len,
+			   struct mt76x0_dma_buf *buf)
+{
+	struct usb_device *usb_dev = mt76x0_to_usb_dev(dev);
+
+	buf->len = len;
+	buf->urb = usb_alloc_urb(0, GFP_KERNEL);
+	buf->buf = usb_alloc_coherent(usb_dev, buf->len, GFP_KERNEL, &buf->dma);
+
+	return !buf->urb || !buf->buf;
+}
+
+void mt76x0_usb_free_buf(struct mt76x0_dev *dev, struct mt76x0_dma_buf *buf)
+{
+	struct usb_device *usb_dev = mt76x0_to_usb_dev(dev);
+
+	usb_free_coherent(usb_dev, buf->len, buf->buf, buf->dma);
+	usb_free_urb(buf->urb);
+}
+
+int mt76x0_usb_submit_buf(struct mt76x0_dev *dev, int dir, int ep_idx,
+			   struct mt76x0_dma_buf *buf, gfp_t gfp,
+			   usb_complete_t complete_fn, void *context)
+{
+	struct usb_device *usb_dev = mt76x0_to_usb_dev(dev);
+	unsigned pipe;
+	int ret;
+
+	if (dir == USB_DIR_IN)
+		pipe = usb_rcvbulkpipe(usb_dev, dev->in_ep[ep_idx]);
+	else
+		pipe = usb_sndbulkpipe(usb_dev, dev->out_ep[ep_idx]);
+
+	usb_fill_bulk_urb(buf->urb, usb_dev, pipe, buf->buf, buf->len,
+			  complete_fn, context);
+	buf->urb->transfer_dma = buf->dma;
+	buf->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	trace_mt_submit_urb(&dev->mt76, buf->urb);
+	ret = usb_submit_urb(buf->urb, gfp);
+	if (ret)
+		dev_err(dev->mt76.dev, "Error: submit URB dir:%d ep:%d failed:%d\n",
+			dir, ep_idx, ret);
+	return ret;
+}
+
+void mt76x0_complete_urb(struct urb *urb)
+{
+	struct completion *cmpl = urb->context;
+
+	complete(cmpl);
+}
+
+int mt76x0_vendor_request(struct mt76x0_dev *dev, const u8 req,
+			   const u8 direction, const u16 val, const u16 offset,
+			   void *buf, const size_t buflen)
+{
+	int i, ret;
+	struct usb_device *usb_dev = mt76x0_to_usb_dev(dev);
+	const u8 req_type = direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+	const unsigned int pipe = (direction == USB_DIR_IN) ?
+		usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);
+
+	for (i = 0; i < MT_VEND_REQ_MAX_RETRY; i++) {
+		ret = usb_control_msg(usb_dev, pipe, req, req_type,
+				      val, offset, buf, buflen,
+				      MT_VEND_REQ_TOUT_MS);
+		trace_mt_vend_req(&dev->mt76, pipe, req, req_type, val, offset,
+				  buf, buflen, ret);
+
+		if (ret == -ENODEV)
+			set_bit(MT76_REMOVED, &dev->mt76.state);
+		if (ret >= 0 || ret == -ENODEV)
+			return ret;
+
+		msleep(5);
+	}
+
+	dev_err(dev->mt76.dev, "Vendor request req:%02x off:%04x failed:%d\n",
+		req, offset, ret);
+
+	return ret;
+}
+
+void mt76x0_vendor_reset(struct mt76x0_dev *dev)
+{
+	mt76x0_vendor_request(dev, MT_VEND_DEV_MODE, USB_DIR_OUT,
+			      MT_VEND_DEV_MODE_RESET, 0, NULL, 0);
+}
+
+static u32 mt76x0_rr(struct mt76_dev *dev, u32 offset)
+{
+	struct mt76x0_dev *mdev = (struct mt76x0_dev *) dev;
+	int ret;
+	u32 val = ~0;
+
+	WARN_ONCE(offset > USHRT_MAX, "read high off:%08x", offset);
+
+	mutex_lock(&mdev->usb_ctrl_mtx);
+
+	ret = mt76x0_vendor_request((struct mt76x0_dev *)dev, MT_VEND_MULTI_READ, USB_DIR_IN,
+				    0, offset, mdev->data, MT_VEND_BUF);
+	if (ret == MT_VEND_BUF)
+		val = get_unaligned_le32(mdev->data);
+	else if (ret > 0)
+		dev_err(dev->dev, "Error: wrong size read:%d off:%08x\n",
+			ret, offset);
+
+	mutex_unlock(&mdev->usb_ctrl_mtx);
+
+	trace_reg_read(dev, offset, val);
+	return val;
+}
+
+int mt76x0_vendor_single_wr(struct mt76x0_dev *dev, const u8 req,
+			     const u16 offset, const u32 val)
+{
+	struct mt76x0_dev *mdev = dev;
+	int ret;
+
+	mutex_lock(&mdev->usb_ctrl_mtx);
+
+	ret = mt76x0_vendor_request(dev, req, USB_DIR_OUT,
+				    val & 0xffff, offset, NULL, 0);
+	if (!ret)
+		ret = mt76x0_vendor_request(dev, req, USB_DIR_OUT,
+					    val >> 16, offset + 2, NULL, 0);
+
+	mutex_unlock(&mdev->usb_ctrl_mtx);
+
+	return ret;
+}
+
+static void mt76x0_wr(struct mt76_dev *dev, u32 offset, u32 val)
+{
+	struct mt76x0_dev *mdev = (struct mt76x0_dev *) dev;
+	int ret;
+
+	WARN_ONCE(offset > USHRT_MAX, "write high off:%08x", offset);
+
+	mutex_lock(&mdev->usb_ctrl_mtx);
+
+	put_unaligned_le32(val, mdev->data);
+	ret = mt76x0_vendor_request(mdev, MT_VEND_MULTI_WRITE, USB_DIR_OUT,
+				    0, offset, mdev->data, MT_VEND_BUF);
+	trace_reg_write(dev, offset, val);
+
+	mutex_unlock(&mdev->usb_ctrl_mtx);
+}
+
+static u32 mt76x0_rmw(struct mt76_dev *dev, u32 offset, u32 mask, u32 val)
+{
+	val |= mt76x0_rr(dev, offset) & ~mask;
+	mt76x0_wr(dev, offset, val);
+	return val;
+}
+
+static void mt76x0_wr_copy(struct mt76_dev *dev, u32 offset,
+			   const void *data, int len)
+{
+	WARN_ONCE(offset & 3, "unaligned write copy off:%08x", offset);
+	WARN_ONCE(len & 3, "short write copy off:%08x", offset);
+
+	mt76x0_burst_write_regs((struct mt76x0_dev *) dev, offset, data, len / 4);
+}
+
+void mt76x0_addr_wr(struct mt76x0_dev *dev, const u32 offset, const u8 *addr)
+{
+	mt76_wr(dev, offset, get_unaligned_le32(addr));
+	mt76_wr(dev, offset + 4, addr[4] | addr[5] << 8);
+}
+
+static int mt76x0_assign_pipes(struct usb_interface *usb_intf,
+				struct mt76x0_dev *dev)
+{
+	struct usb_endpoint_descriptor *ep_desc;
+	struct usb_host_interface *intf_desc = usb_intf->cur_altsetting;
+	unsigned i, ep_i = 0, ep_o = 0;
+
+	BUILD_BUG_ON(sizeof(dev->in_ep) < __MT_EP_IN_MAX);
+	BUILD_BUG_ON(sizeof(dev->out_ep) < __MT_EP_OUT_MAX);
+
+	for (i = 0; i < intf_desc->desc.bNumEndpoints; i++) {
+		ep_desc = &intf_desc->endpoint[i].desc;
+
+		if (usb_endpoint_is_bulk_in(ep_desc) &&
+		    ep_i++ < __MT_EP_IN_MAX) {
+			dev->in_ep[ep_i - 1] = usb_endpoint_num(ep_desc);
+			dev->in_max_packet = usb_endpoint_maxp(ep_desc);
+			/* Note: this is ignored by usb sub-system but vendor
+			 *	 code does it. We can drop this at some point.
+			 */
+			dev->in_ep[ep_i - 1] |= USB_DIR_IN;
+		} else if (usb_endpoint_is_bulk_out(ep_desc) &&
+			   ep_o++ < __MT_EP_OUT_MAX) {
+			dev->out_ep[ep_o - 1] = usb_endpoint_num(ep_desc);
+			dev->out_max_packet = usb_endpoint_maxp(ep_desc);
+		}
+	}
+
+	if (ep_i != __MT_EP_IN_MAX || ep_o != __MT_EP_OUT_MAX) {
+		dev_err(dev->mt76.dev, "Error: wrong pipe number in:%d out:%d\n",
+			ep_i, ep_o);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mt76x0_probe(struct usb_interface *usb_intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(usb_intf);
+	struct mt76x0_dev *dev;
+	u32 asic_rev, mac_rev;
+	int ret;
+	static const struct mt76_bus_ops usb_ops = {
+		.rr = mt76x0_rr,
+		.wr = mt76x0_wr,
+		.rmw = mt76x0_rmw,
+		.copy = mt76x0_wr_copy,
+	};
+
+	dev = mt76x0_alloc_device(&usb_intf->dev);
+	if (!dev)
+		return -ENOMEM;
+
+	usb_dev = usb_get_dev(usb_dev);
+	usb_reset_device(usb_dev);
+
+	usb_set_intfdata(usb_intf, dev);
+
+	dev->mt76.bus = &usb_ops;
+
+	ret = mt76x0_assign_pipes(usb_intf, dev);
+	if (ret)
+		goto err;
+	ret = mt76x0_wait_asic_ready(dev);
+	if (ret)
+		goto err;
+
+	asic_rev = mt76_rr(dev, MT_ASIC_VERSION);
+	mac_rev = mt76_rr(dev, MT_MAC_CSR0);
+	dev_info(dev->mt76.dev, "ASIC revision: %08x MAC revision: %08x\n",
+		 asic_rev, mac_rev);
+
+	/* Note: vendor driver skips this check for MT76X0U */
+	if (!(mt76_rr(dev, MT_EFUSE_CTRL) & MT_EFUSE_CTRL_SEL))
+		dev_warn(dev->mt76.dev, "Warning: eFUSE not present\n");
+
+	ret = mt76x0_init_hardware(dev);
+	if (ret)
+		goto err;
+
+	ret = mt76x0_register_device(dev);
+	if (ret)
+		goto err_hw;
+
+	set_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
+
+	return 0;
+err_hw:
+	mt76x0_cleanup(dev);
+err:
+	usb_set_intfdata(usb_intf, NULL);
+	usb_put_dev(interface_to_usbdev(usb_intf));
+
+	destroy_workqueue(dev->stat_wq);
+	ieee80211_free_hw(dev->mt76.hw);
+	return ret;
+}
+
+static void mt76x0_disconnect(struct usb_interface *usb_intf)
+{
+	struct mt76x0_dev *dev = usb_get_intfdata(usb_intf);
+	bool initalized = test_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
+
+	if (!initalized)
+		return;
+
+	ieee80211_unregister_hw(dev->mt76.hw);
+	mt76x0_cleanup(dev);
+
+	usb_set_intfdata(usb_intf, NULL);
+	usb_put_dev(interface_to_usbdev(usb_intf));
+
+	destroy_workqueue(dev->stat_wq);
+	ieee80211_free_hw(dev->mt76.hw);
+}
+
+static int mt76x0_suspend(struct usb_interface *usb_intf, pm_message_t state)
+{
+	struct mt76x0_dev *dev = usb_get_intfdata(usb_intf);
+
+	mt76x0_cleanup(dev);
+
+	return 0;
+}
+
+static int mt76x0_resume(struct usb_interface *usb_intf)
+{
+	struct mt76x0_dev *dev = usb_get_intfdata(usb_intf);
+	int ret;
+
+	ret = mt76x0_init_hardware(dev);
+	if (ret)
+		return ret;
+
+	set_bit(MT76_STATE_INITIALIZED, &dev->mt76.state);
+
+	return 0;
+}
+
+MODULE_DEVICE_TABLE(usb, mt76x0_device_table);
+MODULE_FIRMWARE(MT7610_FIRMWARE);
+MODULE_LICENSE("GPL");
+
+static struct usb_driver mt76x0_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= mt76x0_device_table,
+	.probe		= mt76x0_probe,
+	.disconnect	= mt76x0_disconnect,
+	.suspend	= mt76x0_suspend,
+	.resume		= mt76x0_resume,
+	.reset_resume	= mt76x0_resume,
+	.soft_unbind	= 1,
+	.disable_hub_initiated_lpm = 1,
+};
+module_usb_driver(mt76x0_driver);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.h b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.h
new file mode 100644
index 000000000000..9e42dfa665de
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT76X0U_USB_H
+#define __MT76X0U_USB_H
+
+#include "mt76x0.h"
+
+#define MT7610_FIRMWARE	"mt7610.bin"
+
+#define MT_VEND_REQ_MAX_RETRY	10
+#define MT_VEND_REQ_TOUT_MS	300
+
+#define MT_VEND_DEV_MODE_RESET	1
+
+#define MT_VEND_BUF		sizeof(__le32)
+
+static inline struct usb_device *mt76x0_to_usb_dev(struct mt76x0_dev *mt76x0)
+{
+	return interface_to_usbdev(to_usb_interface(mt76x0->mt76.dev));
+}
+
+static inline struct usb_device *mt76_to_usb_dev(struct mt76_dev *mt76)
+{
+	return interface_to_usbdev(to_usb_interface(mt76->dev));
+}
+
+static inline bool mt76x0_urb_has_error(struct urb *urb)
+{
+	return urb->status &&
+		urb->status != -ENOENT &&
+		urb->status != -ECONNRESET &&
+		urb->status != -ESHUTDOWN;
+}
+
+bool mt76x0_usb_alloc_buf(struct mt76x0_dev *dev, size_t len,
+			   struct mt76x0_dma_buf *buf);
+void mt76x0_usb_free_buf(struct mt76x0_dev *dev, struct mt76x0_dma_buf *buf);
+int mt76x0_usb_submit_buf(struct mt76x0_dev *dev, int dir, int ep_idx,
+			   struct mt76x0_dma_buf *buf, gfp_t gfp,
+			   usb_complete_t complete_fn, void *context);
+void mt76x0_complete_urb(struct urb *urb);
+
+int mt76x0_vendor_request(struct mt76x0_dev *dev, const u8 req,
+			   const u8 direction, const u16 val, const u16 offset,
+			   void *buf, const size_t buflen);
+void mt76x0_vendor_reset(struct mt76x0_dev *dev);
+int mt76x0_vendor_single_wr(struct mt76x0_dev *dev, const u8 req,
+			     const u16 offset, const u32 val);
+
+#endif
-- 
1.9.3

[PATCH v2 05/12] mt76x0: mcu files

[Stanislaw Gruszka]

Add mcu files of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c | 655 ++++++++++++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h | 101 ++++
 2 files changed, 756 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c
new file mode 100644
index 000000000000..aafa3f325ebf
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c
@@ -0,0 +1,655 @@
+/*
+ * (c) Copyright 2002-2010, Ralink Technology, Inc.
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+#include <linux/skbuff.h>
+
+#include "mt76x0.h"
+#include "dma.h"
+#include "mcu.h"
+#include "usb.h"
+#include "trace.h"
+
+#define MCU_FW_URB_MAX_PAYLOAD		0x38f8
+#define MCU_FW_URB_SIZE			(MCU_FW_URB_MAX_PAYLOAD + 12)
+#define MCU_RESP_URB_SIZE		1024
+
+static inline int firmware_running(struct mt76x0_dev *dev)
+{
+	return mt76_rr(dev, MT_MCU_COM_REG0) == 1;
+}
+
+static inline void skb_put_le32(struct sk_buff *skb, u32 val)
+{
+	put_unaligned_le32(val, skb_put(skb, 4));
+}
+
+static inline void mt76x0_dma_skb_wrap_cmd(struct sk_buff *skb,
+					    u8 seq, enum mcu_cmd cmd)
+{
+	WARN_ON(mt76x0_dma_skb_wrap(skb, CPU_TX_PORT, DMA_COMMAND,
+				     FIELD_PREP(MT_TXD_CMD_SEQ, seq) |
+				     FIELD_PREP(MT_TXD_CMD_TYPE, cmd)));
+}
+
+static inline void trace_mt_mcu_msg_send_cs(struct mt76_dev *dev,
+					    struct sk_buff *skb, bool need_resp)
+{
+	u32 i, csum = 0;
+
+	for (i = 0; i < skb->len / 4; i++)
+		csum ^= get_unaligned_le32(skb->data + i * 4);
+
+	trace_mt_mcu_msg_send(dev, skb, csum, need_resp);
+}
+
+static struct sk_buff *
+mt76x0_mcu_msg_alloc(struct mt76x0_dev *dev, const void *data, int len)
+{
+	struct sk_buff *skb;
+
+	WARN_ON(len % 4); /* if length is not divisible by 4 we need to pad */
+
+	skb = alloc_skb(len + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
+	if (skb) {
+		skb_reserve(skb, MT_DMA_HDR_LEN);
+		memcpy(skb_put(skb, len), data, len);
+	}
+	return skb;
+}
+
+static void mt76x0_read_resp_regs(struct mt76x0_dev *dev, int len)
+{
+	int i;
+	int n = dev->mcu.reg_pairs_len;
+	u8 *buf = dev->mcu.resp.buf;
+
+	buf += 4;
+	len -= 8;
+
+	if (dev->mcu.burst_read) {
+		u32 reg = dev->mcu.reg_pairs[0].reg - dev->mcu.reg_base;
+
+		WARN_ON_ONCE(len/4 != n);
+		for (i = 0; i < n; i++) {
+			u32 val = get_unaligned_le32(buf + 4*i);
+
+			dev->mcu.reg_pairs[i].reg = reg++;
+			dev->mcu.reg_pairs[i].value = val;
+		}
+	} else {
+		WARN_ON_ONCE(len/8 != n);
+		for (i = 0; i < n; i++) {
+			u32 reg = get_unaligned_le32(buf + 8*i) - dev->mcu.reg_base;
+			u32 val = get_unaligned_le32(buf + 8*i + 4);
+
+			WARN_ON_ONCE(dev->mcu.reg_pairs[i].reg != reg);
+			dev->mcu.reg_pairs[i].value = val;
+		}
+	}
+}
+
+static int mt76x0_mcu_wait_resp(struct mt76x0_dev *dev, u8 seq)
+{
+	struct urb *urb = dev->mcu.resp.urb;
+	u32 rxfce;
+	int urb_status, ret, try = 5;
+
+	while (try--) {
+		if (!wait_for_completion_timeout(&dev->mcu.resp_cmpl,
+						 msecs_to_jiffies(300))) {
+			dev_warn(dev->mt76.dev, "Warning: %s retrying\n", __func__);
+			continue;
+		}
+
+		/* Make copies of important data before reusing the urb */
+		rxfce = get_unaligned_le32(dev->mcu.resp.buf);
+		urb_status = urb->status * mt76x0_urb_has_error(urb);
+
+		if (urb_status == 0 && dev->mcu.reg_pairs)
+			mt76x0_read_resp_regs(dev, urb->actual_length);
+
+		ret = mt76x0_usb_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP,
+					     &dev->mcu.resp, GFP_KERNEL,
+					     mt76x0_complete_urb,
+					     &dev->mcu.resp_cmpl);
+		if (ret)
+			return ret;
+
+		if (urb_status)
+			dev_err(dev->mt76.dev, "Error: MCU resp urb failed:%d\n",
+				urb_status);
+
+		if (FIELD_GET(MT_RXD_CMD_INFO_CMD_SEQ, rxfce) == seq &&
+		    FIELD_GET(MT_RXD_CMD_INFO_EVT_TYPE, rxfce) == CMD_DONE)
+			return 0;
+
+		dev_err(dev->mt76.dev, "Error: MCU resp evt:%lx seq:%hhx-%lx!\n",
+			FIELD_GET(MT_RXD_CMD_INFO_EVT_TYPE, rxfce),
+			seq, FIELD_GET(MT_RXD_CMD_INFO_CMD_SEQ, rxfce));
+	}
+
+	dev_err(dev->mt76.dev, "Error: %s timed out\n", __func__);
+	return -ETIMEDOUT;
+}
+
+static int
+__mt76x0_mcu_msg_send(struct mt76x0_dev *dev, struct sk_buff *skb,
+		      enum mcu_cmd cmd, bool wait_resp)
+{
+	struct usb_device *usb_dev = mt76x0_to_usb_dev(dev);
+	unsigned cmd_pipe = usb_sndbulkpipe(usb_dev,
+					    dev->out_ep[MT_EP_OUT_INBAND_CMD]);
+	int sent, ret;
+	u8 seq = 0;
+
+	if (wait_resp)
+		while (!seq)
+			seq = ++dev->mcu.msg_seq & 0xf;
+
+	mt76x0_dma_skb_wrap_cmd(skb, seq, cmd);
+
+	if (dev->mcu.resp_cmpl.done)
+		dev_err(dev->mt76.dev, "Error: MCU response pre-completed!\n");
+
+	trace_mt_mcu_msg_send_cs(&dev->mt76, skb, wait_resp);
+	trace_mt_submit_urb_sync(&dev->mt76, cmd_pipe, skb->len);
+
+	ret = usb_bulk_msg(usb_dev, cmd_pipe, skb->data, skb->len, &sent, 500);
+	if (ret) {
+		dev_err(dev->mt76.dev, "Error: send MCU cmd failed:%d\n", ret);
+		goto out;
+	}
+	if (sent != skb->len)
+		dev_err(dev->mt76.dev, "Error: %s sent != skb->len\n", __func__);
+
+	if (wait_resp)
+		ret = mt76x0_mcu_wait_resp(dev, seq);
+
+out:
+	return ret;
+}
+
+static int
+mt76x0_mcu_msg_send(struct mt76x0_dev *dev, struct sk_buff *skb,
+		     enum mcu_cmd cmd, bool wait_resp)
+{
+	int ret;
+
+	if (test_bit(MT76_REMOVED, &dev->mt76.state))
+		return 0;
+
+	mutex_lock(&dev->mcu.mutex);
+	ret = __mt76x0_mcu_msg_send(dev, skb, cmd, wait_resp);
+	mutex_unlock(&dev->mcu.mutex);
+
+	consume_skb(skb);
+
+	return ret;
+}
+
+int mt76x0_mcu_function_select(struct mt76x0_dev *dev,
+			       enum mcu_function func, u32 val)
+{
+	struct sk_buff *skb;
+	struct {
+		__le32 id;
+		__le32 value;
+	} __packed __aligned(4) msg = {
+		.id = cpu_to_le32(func),
+		.value = cpu_to_le32(val),
+	};
+
+	skb = mt76x0_mcu_msg_alloc(dev, &msg, sizeof(msg));
+	if (!skb)
+		return -ENOMEM;
+	return mt76x0_mcu_msg_send(dev, skb, CMD_FUN_SET_OP, func == 5);
+}
+
+int
+mt76x0_mcu_calibrate(struct mt76x0_dev *dev, enum mcu_calibrate cal, u32 val)
+{
+	struct sk_buff *skb;
+	struct {
+		__le32 id;
+		__le32 value;
+	} __packed __aligned(4) msg = {
+		.id = cpu_to_le32(cal),
+		.value = cpu_to_le32(val),
+	};
+
+	skb = mt76x0_mcu_msg_alloc(dev, &msg, sizeof(msg));
+	if (!skb)
+		return -ENOMEM;
+	return mt76x0_mcu_msg_send(dev, skb, CMD_CALIBRATION_OP, true);
+}
+
+int mt76x0_write_reg_pairs(struct mt76x0_dev *dev, u32 base,
+			   const struct mt76_reg_pair *data, int n)
+{
+	const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 8;
+	struct sk_buff *skb;
+	int cnt, i, ret;
+
+	if (!n)
+		return 0;
+
+	cnt = min(max_vals_per_cmd, n);
+
+	skb = alloc_skb(cnt * 8 + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+	skb_reserve(skb, MT_DMA_HDR_LEN);
+
+	for (i = 0; i < cnt; i++) {
+		skb_put_le32(skb, base + data[i].reg);
+		skb_put_le32(skb, data[i].value);
+	}
+
+	ret = mt76x0_mcu_msg_send(dev, skb, CMD_RANDOM_WRITE, cnt == n);
+	if (ret)
+		return ret;
+
+	return mt76x0_write_reg_pairs(dev, base, data + cnt, n - cnt);
+}
+
+int mt76x0_read_reg_pairs(struct mt76x0_dev *dev, u32 base,
+			  struct mt76_reg_pair *data, int n)
+{
+	const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 8;
+	struct sk_buff *skb;
+	int cnt, i, ret;
+
+	if (!n)
+		return 0;
+
+	cnt = min(max_vals_per_cmd, n);
+	if (cnt != n)
+		return -EINVAL;
+
+	skb = alloc_skb(cnt * 8 + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+	skb_reserve(skb, MT_DMA_HDR_LEN);
+
+	for (i = 0; i < cnt; i++) {
+		skb_put_le32(skb, base + data[i].reg);
+		skb_put_le32(skb, data[i].value);
+	}
+
+	mutex_lock(&dev->mcu.mutex);
+
+	dev->mcu.reg_pairs = data;
+	dev->mcu.reg_pairs_len = n;
+	dev->mcu.reg_base = base;
+	dev->mcu.burst_read = false;
+
+	ret = __mt76x0_mcu_msg_send(dev, skb, CMD_RANDOM_READ, true);
+
+	dev->mcu.reg_pairs = NULL;
+
+	mutex_unlock(&dev->mcu.mutex);
+
+	consume_skb(skb);
+
+	return ret;
+
+}
+
+int mt76x0_burst_write_regs(struct mt76x0_dev *dev, u32 offset,
+			     const u32 *data, int n)
+{
+	const int max_regs_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1;
+	struct sk_buff *skb;
+	int cnt, i, ret;
+
+	if (!n)
+		return 0;
+
+	cnt = min(max_regs_per_cmd, n);
+
+	skb = alloc_skb(cnt * 4 + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+	skb_reserve(skb, MT_DMA_HDR_LEN);
+
+	skb_put_le32(skb, MT_MCU_MEMMAP_WLAN + offset);
+	for (i = 0; i < cnt; i++)
+		skb_put_le32(skb, data[i]);
+
+	ret = mt76x0_mcu_msg_send(dev, skb, CMD_BURST_WRITE, cnt == n);
+	if (ret)
+		return ret;
+
+	return mt76x0_burst_write_regs(dev, offset + cnt * 4,
+					data + cnt, n - cnt);
+}
+
+int mt76x0_burst_read_regs(struct mt76x0_dev *dev, u32 base,
+			   struct mt76_reg_pair *data, int n)
+{
+	const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1;
+	struct sk_buff *skb;
+	int cnt, ret;
+
+	if (!n)
+		return 0;
+
+	cnt = min(max_vals_per_cmd, n);
+	if (cnt != n)
+		return -EINVAL;
+
+	skb = alloc_skb(cnt * 4 + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+	skb_reserve(skb, MT_DMA_HDR_LEN);
+
+	skb_put_le32(skb, base + data[0].reg);
+	skb_put_le32(skb, n);
+
+	mutex_lock(&dev->mcu.mutex);
+
+	dev->mcu.reg_pairs = data;
+	dev->mcu.reg_pairs_len = n;
+	dev->mcu.reg_base = base;
+	dev->mcu.burst_read = true;
+
+	ret = __mt76x0_mcu_msg_send(dev, skb, CMD_BURST_READ, true);
+
+	dev->mcu.reg_pairs = NULL;
+
+	mutex_unlock(&dev->mcu.mutex);
+
+	consume_skb(skb);
+
+	return ret;
+}
+
+
+struct mt76_fw_header {
+	__le32 ilm_len;
+	__le32 dlm_len;
+	__le16 build_ver;
+	__le16 fw_ver;
+	u8 pad[4];
+	char build_time[16];
+};
+
+struct mt76_fw {
+	struct mt76_fw_header hdr;
+	u8 ivb[MT_MCU_IVB_SIZE];
+	u8 ilm[];
+};
+
+static int __mt76x0_dma_fw(struct mt76x0_dev *dev,
+			    const struct mt76x0_dma_buf *dma_buf,
+			    const void *data, u32 len, u32 dst_addr)
+{
+	DECLARE_COMPLETION_ONSTACK(cmpl);
+	struct mt76x0_dma_buf buf = *dma_buf; /* we need to fake length */
+	__le32 reg;
+	u32 val;
+	int ret;
+
+	reg = cpu_to_le32(FIELD_PREP(MT_TXD_INFO_TYPE, DMA_COMMAND) |
+			  FIELD_PREP(MT_TXD_INFO_D_PORT, CPU_TX_PORT) |
+			  FIELD_PREP(MT_TXD_INFO_LEN, len));
+	memcpy(buf.buf, &reg, sizeof(reg));
+	memcpy(buf.buf + sizeof(reg), data, len);
+	memset(buf.buf + sizeof(reg) + len, 0, 8);
+
+	ret = mt76x0_vendor_single_wr(dev, MT_VEND_WRITE_FCE,
+				       MT_FCE_DMA_ADDR, dst_addr);
+	if (ret)
+		return ret;
+	len = roundup(len, 4);
+	ret = mt76x0_vendor_single_wr(dev, MT_VEND_WRITE_FCE,
+				       MT_FCE_DMA_LEN, len << 16);
+	if (ret)
+		return ret;
+
+	buf.len = MT_DMA_HDR_LEN + len + 4;
+	ret = mt76x0_usb_submit_buf(dev, USB_DIR_OUT, MT_EP_OUT_INBAND_CMD,
+				     &buf, GFP_KERNEL,
+				     mt76x0_complete_urb, &cmpl);
+	if (ret)
+		return ret;
+
+	if (!wait_for_completion_timeout(&cmpl, msecs_to_jiffies(1000))) {
+		dev_err(dev->mt76.dev, "Error: firmware upload timed out\n");
+		usb_kill_urb(buf.urb);
+		return -ETIMEDOUT;
+	}
+	if (mt76x0_urb_has_error(buf.urb)) {
+		dev_err(dev->mt76.dev, "Error: firmware upload urb failed:%d\n",
+			buf.urb->status);
+		return buf.urb->status;
+	}
+
+	val = mt76_rr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX);
+	val++;
+	mt76_wr(dev, MT_TX_CPU_FROM_FCE_CPU_DESC_IDX, val);
+
+	msleep(5);
+
+	return 0;
+}
+
+static int
+mt76x0_dma_fw(struct mt76x0_dev *dev, struct mt76x0_dma_buf *dma_buf,
+	       const void *data, int len, u32 dst_addr)
+{
+	int n, ret;
+
+	if (len == 0)
+		return 0;
+
+	n = min(MCU_FW_URB_MAX_PAYLOAD, len);
+	ret = __mt76x0_dma_fw(dev, dma_buf, data, n, dst_addr);
+	if (ret)
+		return ret;
+
+#if 0
+	if (!mt76_poll_msec(dev, MT_MCU_COM_REG1, BIT(31), BIT(31), 500))
+		return -ETIMEDOUT;
+#endif
+
+	return mt76x0_dma_fw(dev, dma_buf, data + n, len - n, dst_addr + n);
+}
+
+static int
+mt76x0_upload_firmware(struct mt76x0_dev *dev, const struct mt76_fw *fw)
+{
+	struct mt76x0_dma_buf dma_buf;
+	void *ivb;
+	u32 ilm_len, dlm_len;
+	int i, ret;
+
+	ivb = kmemdup(fw->ivb, sizeof(fw->ivb), GFP_KERNEL);
+	if (!ivb)
+		return -ENOMEM;
+	if (mt76x0_usb_alloc_buf(dev, MCU_FW_URB_SIZE, &dma_buf)) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	ilm_len = le32_to_cpu(fw->hdr.ilm_len) - sizeof(fw->ivb);
+	dev_dbg(dev->mt76.dev, "loading FW - ILM %u + IVB %zu\n",
+		ilm_len, sizeof(fw->ivb));
+	ret = mt76x0_dma_fw(dev, &dma_buf, fw->ilm, ilm_len, sizeof(fw->ivb));
+	if (ret)
+		goto error;
+
+	dlm_len = le32_to_cpu(fw->hdr.dlm_len);
+	dev_dbg(dev->mt76.dev, "loading FW - DLM %u\n", dlm_len);
+	ret = mt76x0_dma_fw(dev, &dma_buf, fw->ilm + ilm_len,
+			     dlm_len, MT_MCU_DLM_OFFSET);
+	if (ret)
+		goto error;
+
+	ret = mt76x0_vendor_request(dev, MT_VEND_DEV_MODE, USB_DIR_OUT,
+				     0x12, 0, ivb, sizeof(fw->ivb));
+	if (ret < 0)
+		goto error;
+	ret = 0;
+
+	for (i = 100; i && !firmware_running(dev); i--)
+		msleep(10);
+	if (!i) {
+		ret = -ETIMEDOUT;
+		goto error;
+	}
+
+	dev_dbg(dev->mt76.dev, "Firmware running!\n");
+error:
+	kfree(ivb);
+	mt76x0_usb_free_buf(dev, &dma_buf);
+
+	return ret;
+}
+
+static int mt76x0_load_firmware(struct mt76x0_dev *dev)
+{
+	const struct firmware *fw;
+	const struct mt76_fw_header *hdr;
+	int len, ret;
+	u32 val;
+
+	mt76_wr(dev, MT_USB_DMA_CFG, (MT_USB_DMA_CFG_RX_BULK_EN |
+					 MT_USB_DMA_CFG_TX_BULK_EN));
+
+	if (firmware_running(dev))
+		return 0;
+
+	ret = request_firmware(&fw, MT7610_FIRMWARE, dev->mt76.dev);
+	if (ret)
+		return ret;
+
+	if (!fw || !fw->data || fw->size < sizeof(*hdr))
+		goto err_inv_fw;
+
+	hdr = (const struct mt76_fw_header *) fw->data;
+
+	if (le32_to_cpu(hdr->ilm_len) <= MT_MCU_IVB_SIZE)
+		goto err_inv_fw;
+
+	len = sizeof(*hdr);
+	len += le32_to_cpu(hdr->ilm_len);
+	len += le32_to_cpu(hdr->dlm_len);
+
+	if (fw->size != len)
+		goto err_inv_fw;
+
+	val = le16_to_cpu(hdr->fw_ver);
+	dev_dbg(dev->mt76.dev,
+		 "Firmware Version: %d.%d.%02d Build: %x Build time: %.16s\n",
+		 (val >> 12) & 0xf, (val >> 8) & 0xf, val & 0xf,
+		 le16_to_cpu(hdr->build_ver), hdr->build_time);
+
+	len = le32_to_cpu(hdr->ilm_len);
+
+	mt76_wr(dev, 0x1004, 0x2c);
+
+	mt76_set(dev, MT_USB_DMA_CFG, (MT_USB_DMA_CFG_RX_BULK_EN |
+				       MT_USB_DMA_CFG_TX_BULK_EN) |
+				       FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_TOUT, 0x20));
+	mt76x0_vendor_reset(dev);
+	msleep(5);
+/*
+	mt76x0_rmw(dev, MT_PBF_CFG, 0, (MT_PBF_CFG_TX0Q_EN |
+					 MT_PBF_CFG_TX1Q_EN |
+					 MT_PBF_CFG_TX2Q_EN |
+					 MT_PBF_CFG_TX3Q_EN));
+*/
+
+	mt76_wr(dev, MT_FCE_PSE_CTRL, 1);
+
+	/* FCE tx_fs_base_ptr */
+	mt76_wr(dev, MT_TX_CPU_FROM_FCE_BASE_PTR, 0x400230);
+	/* FCE tx_fs_max_cnt */
+	mt76_wr(dev, MT_TX_CPU_FROM_FCE_MAX_COUNT, 1);
+	/* FCE pdma enable */
+	mt76_wr(dev, MT_FCE_PDMA_GLOBAL_CONF, 0x44);
+	/* FCE skip_fs_en */
+	mt76_wr(dev, MT_FCE_SKIP_FS, 3);
+
+	val = mt76_rr(dev, MT_USB_DMA_CFG);
+	val |= MT_USB_DMA_CFG_TX_WL_DROP;
+	mt76_wr(dev, MT_USB_DMA_CFG, val);
+	val &= ~MT_USB_DMA_CFG_TX_WL_DROP;
+	mt76_wr(dev, MT_USB_DMA_CFG, val);
+
+	ret = mt76x0_upload_firmware(dev, (const struct mt76_fw *)fw->data);
+	release_firmware(fw);
+
+	mt76_wr(dev, MT_FCE_PSE_CTRL, 1);
+
+	return ret;
+
+err_inv_fw:
+	dev_err(dev->mt76.dev, "Invalid firmware image\n");
+	release_firmware(fw);
+	return -ENOENT;
+}
+
+int mt76x0_mcu_init(struct mt76x0_dev *dev)
+{
+	int ret;
+
+	mutex_init(&dev->mcu.mutex);
+
+	ret = mt76x0_load_firmware(dev);
+	if (ret)
+		return ret;
+
+	set_bit(MT76_STATE_MCU_RUNNING, &dev->mt76.state);
+
+	return 0;
+}
+
+int mt76x0_mcu_cmd_init(struct mt76x0_dev *dev)
+{
+	int ret;
+
+	ret = mt76x0_mcu_function_select(dev, Q_SELECT, 1);
+	if (ret)
+		return ret;
+
+	init_completion(&dev->mcu.resp_cmpl);
+	if (mt76x0_usb_alloc_buf(dev, MCU_RESP_URB_SIZE, &dev->mcu.resp)) {
+		mt76x0_usb_free_buf(dev, &dev->mcu.resp);
+		return -ENOMEM;
+	}
+
+	ret = mt76x0_usb_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP,
+				     &dev->mcu.resp, GFP_KERNEL,
+				     mt76x0_complete_urb, &dev->mcu.resp_cmpl);
+	if (ret) {
+		mt76x0_usb_free_buf(dev, &dev->mcu.resp);
+		return ret;
+	}
+
+	return 0;
+}
+
+void mt76x0_mcu_cmd_deinit(struct mt76x0_dev *dev)
+{
+	usb_kill_urb(dev->mcu.resp.urb);
+	mt76x0_usb_free_buf(dev, &dev->mcu.resp);
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h b/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h
new file mode 100644
index 000000000000..8c2f77f4c3f5
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT76X0U_MCU_H
+#define __MT76X0U_MCU_H
+
+struct mt76x0_dev;
+
+/* Register definitions */
+#define MT_MCU_RESET_CTL		0x070C
+#define MT_MCU_INT_LEVEL		0x0718
+#define MT_MCU_COM_REG0			0x0730
+#define MT_MCU_COM_REG1			0x0734
+#define MT_MCU_COM_REG2			0x0738
+#define MT_MCU_COM_REG3			0x073C
+
+#define MT_MCU_IVB_SIZE			0x40
+#define MT_MCU_DLM_OFFSET		0x80000
+
+#define MT_MCU_MEMMAP_WLAN		0x00410000
+/* We use same space for BBP as for MAC regs
+ * #define MT_MCU_MEMMAP_BBP		0x40000000
+ */
+#define MT_MCU_MEMMAP_RF		0x80000000
+
+#define INBAND_PACKET_MAX_LEN		192
+
+enum mcu_cmd {
+	CMD_FUN_SET_OP = 1,
+	CMD_LOAD_CR = 2,
+	CMD_INIT_GAIN_OP = 3,
+	CMD_DYNC_VGA_OP = 6,
+	CMD_TDLS_CH_SW = 7,
+	CMD_BURST_WRITE = 8,
+	CMD_READ_MODIFY_WRITE = 9,
+	CMD_RANDOM_READ = 10,
+	CMD_BURST_READ = 11,
+	CMD_RANDOM_WRITE = 12,
+	CMD_LED_MODE_OP = 16,
+	CMD_POWER_SAVING_OP = 20,
+	CMD_WOW_CONFIG = 21,
+	CMD_WOW_QUERY = 22,
+	CMD_WOW_FEATURE = 24,
+	CMD_CARRIER_DETECT_OP = 28,
+	CMD_RADOR_DETECT_OP = 29,
+	CMD_SWITCH_CHANNEL_OP = 30,
+	CMD_CALIBRATION_OP = 31,
+	CMD_BEACON_OP = 32,
+	CMD_ANTENNA_OP = 33,
+};
+
+enum mcu_function {
+	Q_SELECT = 1,
+	BW_SETTING = 2,
+	ATOMIC_TSSI_SETTING = 5,
+};
+
+enum mcu_power_mode {
+	RADIO_OFF = 0x30,
+	RADIO_ON = 0x31,
+	RADIO_OFF_AUTO_WAKEUP = 0x32,
+	RADIO_OFF_ADVANCE = 0x33,
+	RADIO_ON_ADVANCE = 0x34,
+};
+
+enum mcu_calibrate {
+	MCU_CAL_R = 1,
+	MCU_CAL_RXDCOC,
+	MCU_CAL_LC,
+	MCU_CAL_LOFT,
+	MCU_CAL_TXIQ,
+	MCU_CAL_BW,
+	MCU_CAL_DPD,
+	MCU_CAL_RXIQ,
+	MCU_CAL_TXDCOC,
+	MCU_CAL_RX_GROUP_DELAY,
+	MCU_CAL_TX_GROUP_DELAY,
+};
+
+int mt76x0_mcu_init(struct mt76x0_dev *dev);
+int mt76x0_mcu_cmd_init(struct mt76x0_dev *dev);
+void mt76x0_mcu_cmd_deinit(struct mt76x0_dev *dev);
+
+int
+mt76x0_mcu_calibrate(struct mt76x0_dev *dev, enum mcu_calibrate cal, u32 val);
+
+int
+mt76x0_mcu_function_select(struct mt76x0_dev *dev, enum mcu_function func, u32 val);
+
+#endif
-- 
1.9.3

[PATCH v2 06/12] mt76x0: phy files

[Stanislaw Gruszka]

Add phy files of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 .../wireless/mediatek/mt76/mt76x0/initvals_phy.h   |  772 +++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/phy.c    | 1008 ++++++++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/phy.h    |   81 ++
 3 files changed, 1861 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/initvals_phy.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/phy.h

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/initvals_phy.h b/drivers/net/wireless/mediatek/mt76/mt76x0/initvals_phy.h
new file mode 100644
index 000000000000..95d43efc1f3d
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/initvals_phy.h
@@ -0,0 +1,772 @@
+/*
+ * (c) Copyright 2002-2010, Ralink Technology, Inc.
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT76X0U_PHY_INITVALS_H
+#define __MT76X0U_PHY_INITVALS_H
+
+#define RF_REG_PAIR(bank, reg, value)				\
+	{ (bank) << 16 | (reg), value }
+
+
+static const struct mt76_reg_pair mt76x0_rf_central_tab[] = {
+/*
+	Bank 0 - For central blocks: BG, PLL, XTAL, LO, ADC/DAC
+*/
+	{ MT_RF(0, 1), 0x01},
+	{ MT_RF(0, 2), 0x11},
+
+	/*
+		R3 ~ R7: VCO Cal.
+	*/
+	{ MT_RF(0, 3), 0x73}, /* VCO Freq Cal - No Bypass, VCO Amp Cal - No Bypass */
+	{ MT_RF(0, 4), 0x30}, /* R4 b<7>=1, VCO cal */
+	{ MT_RF(0, 5), 0x00},
+	{ MT_RF(0, 6), 0x41}, /* Set the open loop amplitude to middle since bypassing amplitude calibration */
+	{ MT_RF(0, 7), 0x00},
+
+	/*
+		XO
+	*/
+	{ MT_RF(0,  8), 0x00},
+	{ MT_RF(0,  9), 0x00},
+	{ MT_RF(0, 10), 0x0C},
+	{ MT_RF(0, 11), 0x00},
+	{ MT_RF(0, 12), 0x00},
+
+	/*
+		BG
+	*/
+	{ MT_RF(0, 13), 0x00},
+	{ MT_RF(0, 14), 0x00},
+	{ MT_RF(0, 15), 0x00},
+
+	/*
+		LDO
+	*/
+	{ MT_RF(0, 19), 0x20},
+	/*
+		XO
+	*/
+	{ MT_RF(0, 20), 0x22},
+	{ MT_RF(0, 21), 0x12},
+	{ MT_RF(0, 23), 0x00},
+	{ MT_RF(0, 24), 0x33}, /* See band selection for R24<1:0> */
+	{ MT_RF(0, 25), 0x00},
+
+	/*
+		PLL, See Freq Selection
+	*/
+	{ MT_RF(0, 26), 0x00},
+	{ MT_RF(0, 27), 0x00},
+	{ MT_RF(0, 28), 0x00},
+	{ MT_RF(0, 29), 0x00},
+	{ MT_RF(0, 30), 0x00},
+	{ MT_RF(0, 31), 0x00},
+	{ MT_RF(0, 32), 0x00},
+	{ MT_RF(0, 33), 0x00},
+	{ MT_RF(0, 34), 0x00},
+	{ MT_RF(0, 35), 0x00},
+	{ MT_RF(0, 36), 0x00},
+	{ MT_RF(0, 37), 0x00},
+
+	/*
+		LO Buffer
+	*/
+	{ MT_RF(0, 38), 0x2F},
+
+	/*
+		Test Ports
+	*/
+	{ MT_RF(0, 64), 0x00},
+	{ MT_RF(0, 65), 0x80},
+	{ MT_RF(0, 66), 0x01},
+	{ MT_RF(0, 67), 0x04},
+
+	/*
+		ADC/DAC
+	*/
+	{ MT_RF(0, 68), 0x00},
+	{ MT_RF(0, 69), 0x08},
+	{ MT_RF(0, 70), 0x08},
+	{ MT_RF(0, 71), 0x40},
+	{ MT_RF(0, 72), 0xD0},
+	{ MT_RF(0, 73), 0x93},
+};
+
+static const struct mt76_reg_pair mt76x0_rf_2g_channel_0_tab[] = {
+/*
+	Bank 5 - Channel 0 2G RF registers
+*/
+	/*
+		RX logic operation
+	*/
+	/* RF_R00 Change in SelectBand6590 */
+
+	{ MT_RF(5, 2), 0x0C}, /* 5G+2G (MT7610U) */
+	{ MT_RF(5, 3), 0x00},
+
+	/*
+		TX logic operation
+	*/
+	{ MT_RF(5, 4), 0x00},
+	{ MT_RF(5, 5), 0x84},
+	{ MT_RF(5, 6), 0x02},
+
+	/*
+		LDO
+	*/
+	{ MT_RF(5, 7), 0x00},
+	{ MT_RF(5, 8), 0x00},
+	{ MT_RF(5, 9), 0x00},
+
+	/*
+		RX
+	*/
+	{ MT_RF(5, 10), 0x51},
+	{ MT_RF(5, 11), 0x22},
+	{ MT_RF(5, 12), 0x22},
+	{ MT_RF(5, 13), 0x0F},
+	{ MT_RF(5, 14), 0x47}, /* Increase mixer current for more gain */
+	{ MT_RF(5, 15), 0x25},
+	{ MT_RF(5, 16), 0xC7}, /* Tune LNA2 tank */
+	{ MT_RF(5, 17), 0x00},
+	{ MT_RF(5, 18), 0x00},
+	{ MT_RF(5, 19), 0x30}, /* Improve max Pin */
+	{ MT_RF(5, 20), 0x33},
+	{ MT_RF(5, 21), 0x02},
+	{ MT_RF(5, 22), 0x32}, /* Tune LNA1 tank */
+	{ MT_RF(5, 23), 0x00},
+	{ MT_RF(5, 24), 0x25},
+	{ MT_RF(5, 26), 0x00},
+	{ MT_RF(5, 27), 0x12},
+	{ MT_RF(5, 28), 0x0F},
+	{ MT_RF(5, 29), 0x00},
+
+	/*
+		LOGEN
+	*/
+	{ MT_RF(5, 30), 0x51}, /* Tune LOGEN tank */
+	{ MT_RF(5, 31), 0x35},
+	{ MT_RF(5, 32), 0x31},
+	{ MT_RF(5, 33), 0x31},
+	{ MT_RF(5, 34), 0x34},
+	{ MT_RF(5, 35), 0x03},
+	{ MT_RF(5, 36), 0x00},
+
+	/*
+		TX
+	*/
+	{ MT_RF(5, 37), 0xDD}, /* Improve 3.2GHz spur */
+	{ MT_RF(5, 38), 0xB3},
+	{ MT_RF(5, 39), 0x33},
+	{ MT_RF(5, 40), 0xB1},
+	{ MT_RF(5, 41), 0x71},
+	{ MT_RF(5, 42), 0xF2},
+	{ MT_RF(5, 43), 0x47},
+	{ MT_RF(5, 44), 0x77},
+	{ MT_RF(5, 45), 0x0E},
+	{ MT_RF(5, 46), 0x10},
+	{ MT_RF(5, 47), 0x00},
+	{ MT_RF(5, 48), 0x53},
+	{ MT_RF(5, 49), 0x03},
+	{ MT_RF(5, 50), 0xEF},
+	{ MT_RF(5, 51), 0xC7},
+	{ MT_RF(5, 52), 0x62},
+	{ MT_RF(5, 53), 0x62},
+	{ MT_RF(5, 54), 0x00},
+	{ MT_RF(5, 55), 0x00},
+	{ MT_RF(5, 56), 0x0F},
+	{ MT_RF(5, 57), 0x0F},
+	{ MT_RF(5, 58), 0x16},
+	{ MT_RF(5, 59), 0x16},
+	{ MT_RF(5, 60), 0x10},
+	{ MT_RF(5, 61), 0x10},
+	{ MT_RF(5, 62), 0xD0},
+	{ MT_RF(5, 63), 0x6C},
+	{ MT_RF(5, 64), 0x58},
+	{ MT_RF(5, 65), 0x58},
+	{ MT_RF(5, 66), 0xF2},
+	{ MT_RF(5, 67), 0xE8},
+	{ MT_RF(5, 68), 0xF0},
+	{ MT_RF(5, 69), 0xF0},
+	{ MT_RF(5, 127), 0x04},
+};
+
+static const struct mt76_reg_pair mt76x0_rf_5g_channel_0_tab[] = {
+/*
+	Bank 6 - Channel 0 5G RF registers
+*/
+	/*
+		RX logic operation
+	*/
+	/* RF_R00 Change in SelectBandmt76x0 */
+
+	{ MT_RF(6, 2), 0x0C},
+	{ MT_RF(6, 3), 0x00},
+
+	/*
+		TX logic operation
+	*/
+	{ MT_RF(6, 4), 0x00},
+	{ MT_RF(6, 5), 0x84},
+	{ MT_RF(6, 6), 0x02},
+
+	/*
+		LDO
+	*/
+	{ MT_RF(6, 7), 0x00},
+	{ MT_RF(6, 8), 0x00},
+	{ MT_RF(6, 9), 0x00},
+
+	/*
+		RX
+	*/
+	{ MT_RF(6, 10), 0x00},
+	{ MT_RF(6, 11), 0x01},
+
+	{ MT_RF(6, 13), 0x23},
+	{ MT_RF(6, 14), 0x00},
+	{ MT_RF(6, 15), 0x04},
+	{ MT_RF(6, 16), 0x22},
+
+	{ MT_RF(6, 18), 0x08},
+	{ MT_RF(6, 19), 0x00},
+	{ MT_RF(6, 20), 0x00},
+	{ MT_RF(6, 21), 0x00},
+	{ MT_RF(6, 22), 0xFB},
+
+	/*
+		LOGEN5G
+	*/
+	{ MT_RF(6, 25), 0x76},
+	{ MT_RF(6, 26), 0x24},
+	{ MT_RF(6, 27), 0x04},
+	{ MT_RF(6, 28), 0x00},
+	{ MT_RF(6, 29), 0x00},
+
+	/*
+		TX
+	*/
+	{ MT_RF(6, 37), 0xBB},
+	{ MT_RF(6, 38), 0xB3},
+
+	{ MT_RF(6, 40), 0x33},
+	{ MT_RF(6, 41), 0x33},
+
+	{ MT_RF(6, 43), 0x03},
+	{ MT_RF(6, 44), 0xB3},
+
+	{ MT_RF(6, 46), 0x17},
+	{ MT_RF(6, 47), 0x0E},
+	{ MT_RF(6, 48), 0x10},
+	{ MT_RF(6, 49), 0x07},
+
+	{ MT_RF(6, 62), 0x00},
+	{ MT_RF(6, 63), 0x00},
+	{ MT_RF(6, 64), 0xF1},
+	{ MT_RF(6, 65), 0x0F},
+};
+
+static const struct mt76_reg_pair mt76x0_rf_vga_channel_0_tab[] = {
+/*
+	Bank 7 - Channel 0 VGA RF registers
+*/
+	/* E3 CR */
+	{ MT_RF(7, 0), 0x47}, /* Allow BBP/MAC to do calibration */
+	{ MT_RF(7, 1), 0x00},
+	{ MT_RF(7, 2), 0x00},
+	{ MT_RF(7, 3), 0x00},
+	{ MT_RF(7, 4), 0x00},
+
+	{ MT_RF(7, 10), 0x13},
+	{ MT_RF(7, 11), 0x0F},
+	{ MT_RF(7, 12), 0x13}, /* For dcoc */
+	{ MT_RF(7, 13), 0x13}, /* For dcoc */
+	{ MT_RF(7, 14), 0x13}, /* For dcoc */
+	{ MT_RF(7, 15), 0x20}, /* For dcoc */
+	{ MT_RF(7, 16), 0x22}, /* For dcoc */
+
+	{ MT_RF(7, 17), 0x7C},
+
+	{ MT_RF(7, 18), 0x00},
+	{ MT_RF(7, 19), 0x00},
+	{ MT_RF(7, 20), 0x00},
+	{ MT_RF(7, 21), 0xF1},
+	{ MT_RF(7, 22), 0x11},
+	{ MT_RF(7, 23), 0xC2},
+	{ MT_RF(7, 24), 0x41},
+	{ MT_RF(7, 25), 0x20},
+	{ MT_RF(7, 26), 0x40},
+	{ MT_RF(7, 27), 0xD7},
+	{ MT_RF(7, 28), 0xA2},
+	{ MT_RF(7, 29), 0x60},
+	{ MT_RF(7, 30), 0x49},
+	{ MT_RF(7, 31), 0x20},
+	{ MT_RF(7, 32), 0x44},
+	{ MT_RF(7, 33), 0xC1},
+	{ MT_RF(7, 34), 0x60},
+	{ MT_RF(7, 35), 0xC0},
+
+	{ MT_RF(7, 61), 0x01},
+
+	{ MT_RF(7, 72), 0x3C},
+	{ MT_RF(7, 73), 0x34},
+	{ MT_RF(7, 74), 0x00},
+};
+
+static const struct mt76x0_rf_switch_item mt76x0_rf_bw_switch_tab[] = {
+	/*   Bank, 		Register,	Bw/Band, 	Value */
+	{ MT_RF(0, 17),		RF_G_BAND | RF_BW_20,	0x00},
+	{ MT_RF(0, 17),		RF_G_BAND | RF_BW_40,	0x00},
+	{ MT_RF(0, 17),		RF_A_BAND | RF_BW_20,	0x00},
+	{ MT_RF(0, 17),		RF_A_BAND | RF_BW_40,	0x00},
+	{ MT_RF(0, 17),		RF_A_BAND | RF_BW_80,	0x00},
+
+	/* TODO: need to check B7.R6 & B7.R7 setting for 2.4G again @20121112 */
+	{ MT_RF(7,  6),		RF_G_BAND | RF_BW_20,	0x40},
+	{ MT_RF(7,  6),		RF_G_BAND | RF_BW_40,	0x1C},
+	{ MT_RF(7,  6),		RF_A_BAND | RF_BW_20,	0x40},
+	{ MT_RF(7,  6),		RF_A_BAND | RF_BW_40,	0x20},
+	{ MT_RF(7,  6),		RF_A_BAND | RF_BW_80,	0x10},
+
+	{ MT_RF(7,  7),		RF_G_BAND | RF_BW_20,	0x40},
+	{ MT_RF(7,  7),		RF_G_BAND | RF_BW_40,	0x20},
+	{ MT_RF(7,  7),		RF_A_BAND | RF_BW_20,	0x40},
+	{ MT_RF(7,  7),		RF_A_BAND | RF_BW_40,	0x20},
+	{ MT_RF(7,  7),		RF_A_BAND | RF_BW_80,	0x10},
+
+	{ MT_RF(7,  8),		RF_G_BAND | RF_BW_20,	0x03},
+	{ MT_RF(7,  8),		RF_G_BAND | RF_BW_40,	0x01},
+	{ MT_RF(7,  8),		RF_A_BAND | RF_BW_20,	0x03},
+	{ MT_RF(7,  8),		RF_A_BAND | RF_BW_40,	0x01},
+	{ MT_RF(7,  8),		RF_A_BAND | RF_BW_80,	0x00},
+
+	/* TODO: need to check B7.R58 & B7.R59 setting for 2.4G again @20121112 */
+	{ MT_RF(7, 58),		RF_G_BAND | RF_BW_20,	0x40},
+	{ MT_RF(7, 58),		RF_G_BAND | RF_BW_40,	0x40},
+	{ MT_RF(7, 58),		RF_A_BAND | RF_BW_20,	0x40},
+	{ MT_RF(7, 58),		RF_A_BAND | RF_BW_40,	0x40},
+	{ MT_RF(7, 58),		RF_A_BAND | RF_BW_80,	0x10},
+
+	{ MT_RF(7, 59),		RF_G_BAND | RF_BW_20,	0x40},
+	{ MT_RF(7, 59),		RF_G_BAND | RF_BW_40,	0x40},
+	{ MT_RF(7, 59),		RF_A_BAND | RF_BW_20,	0x40},
+	{ MT_RF(7, 59),		RF_A_BAND | RF_BW_40,	0x40},
+	{ MT_RF(7, 59),		RF_A_BAND | RF_BW_80,	0x10},
+
+	{ MT_RF(7, 60),		RF_G_BAND | RF_BW_20,	0xAA},
+	{ MT_RF(7, 60),		RF_G_BAND | RF_BW_40,	0xAA},
+	{ MT_RF(7, 60),		RF_A_BAND | RF_BW_20,	0xAA},
+	{ MT_RF(7, 60),		RF_A_BAND | RF_BW_40,	0xAA},
+	{ MT_RF(7, 60),		RF_A_BAND | RF_BW_80,	0xAA},
+
+	{ MT_RF(7, 76),		RF_BW_20,	0x40},
+	{ MT_RF(7, 76),		RF_BW_40,	0x40},
+	{ MT_RF(7, 76),		RF_BW_80,	0x10},
+
+	{ MT_RF(7, 77),		RF_BW_20,	0x40},
+	{ MT_RF(7, 77),		RF_BW_40,	0x40},
+	{ MT_RF(7, 77),		RF_BW_80,	0x10},
+};
+
+static const struct mt76x0_rf_switch_item mt76x0_rf_band_switch_tab[] = {
+	/*   Bank, 		Register,	Bw/Band, 		Value */
+	{ MT_RF(0, 16),		RF_G_BAND,		0x20},
+	{ MT_RF(0, 16),		RF_A_BAND,		0x20},
+
+	{ MT_RF(0, 18),		RF_G_BAND,		0x00},
+	{ MT_RF(0, 18),		RF_A_BAND,		0x00},
+
+	{ MT_RF(0, 39),		RF_G_BAND,		0x36},
+	{ MT_RF(0, 39),		RF_A_BAND_LB,	0x34},
+	{ MT_RF(0, 39),		RF_A_BAND_MB,	0x33},
+	{ MT_RF(0, 39),		RF_A_BAND_HB,	0x31},
+	{ MT_RF(0, 39),		RF_A_BAND_11J,	0x36},
+
+	{ MT_RF(6, 12),		RF_A_BAND_LB,	0x44},
+	{ MT_RF(6, 12),		RF_A_BAND_MB,	0x44},
+	{ MT_RF(6, 12),		RF_A_BAND_HB,	0x55},
+	{ MT_RF(6, 12),		RF_A_BAND_11J,	0x44},
+
+	{ MT_RF(6, 17),		RF_A_BAND_LB,	0x02},
+	{ MT_RF(6, 17),		RF_A_BAND_MB,	0x00},
+	{ MT_RF(6, 17),		RF_A_BAND_HB,	0x00},
+	{ MT_RF(6, 17),		RF_A_BAND_11J,	0x05},
+
+	{ MT_RF(6, 24),		RF_A_BAND_LB,	0xA1},
+	{ MT_RF(6, 24),		RF_A_BAND_MB,	0x41},
+	{ MT_RF(6, 24),		RF_A_BAND_HB,	0x21},
+	{ MT_RF(6, 24),		RF_A_BAND_11J,	0xE1},
+
+	{ MT_RF(6, 39),		RF_A_BAND_LB,	0x36},
+	{ MT_RF(6, 39),		RF_A_BAND_MB,	0x34},
+	{ MT_RF(6, 39),		RF_A_BAND_HB,	0x32},
+	{ MT_RF(6, 39),		RF_A_BAND_11J,	0x37},
+
+	{ MT_RF(6, 42),		RF_A_BAND_LB,	0xFB},
+	{ MT_RF(6, 42),		RF_A_BAND_MB,	0xF3},
+	{ MT_RF(6, 42),		RF_A_BAND_HB,	0xEB},
+	{ MT_RF(6, 42),		RF_A_BAND_11J,	0xEB},
+
+	/* Move R6-R45, R50~R59 to mt76x0_RF_INT_PA_5G_Channel_0_RegTb/mt76x0_RF_EXT_PA_5G_Channel_0_RegTb */
+
+	{ MT_RF(6, 127),	RF_G_BAND,		0x84},
+	{ MT_RF(6, 127),	RF_A_BAND,		0x04},
+
+	{ MT_RF(7, 5),		RF_G_BAND,		0x40},
+	{ MT_RF(7, 5),		RF_A_BAND,		0x00},
+
+	{ MT_RF(7, 9),		RF_G_BAND,		0x00},
+	{ MT_RF(7, 9),		RF_A_BAND,		0x00},
+
+	{ MT_RF(7, 70),		RF_G_BAND,		0x00},
+	{ MT_RF(7, 70),		RF_A_BAND,		0x6D},
+
+	{ MT_RF(7, 71),		RF_G_BAND,		0x00},
+	{ MT_RF(7, 71),		RF_A_BAND,		0xB0},
+
+	{ MT_RF(7, 78),		RF_G_BAND,		0x00},
+	{ MT_RF(7, 78),		RF_A_BAND,		0x55},
+
+	{ MT_RF(7, 79),		RF_G_BAND,		0x00},
+	{ MT_RF(7, 79),		RF_A_BAND,		0x55},
+};
+
+static const struct mt76x0_freq_item mt76x0_frequency_plan[] = {
+	{1,	RF_G_BAND,	0x02, 0x3F, 0x28, 0xDD, 0xE2, 0x40, 0x02, 0x40, 0x02, 0, 0, 1, 0x28, 0, 0x30, 0, 0, 0x3}, /* Freq 2412 */
+	{2, 	RF_G_BAND,	0x02, 0x3F, 0x3C, 0xDD, 0xE4, 0x40, 0x07, 0x40, 0x02, 0, 0, 1, 0xA1, 0, 0x30, 0, 0, 0x1}, /* Freq 2417 */
+	{3, 	RF_G_BAND,	0x02, 0x3F, 0x3C, 0xDD, 0xE2, 0x40, 0x07, 0x40, 0x0B, 0, 0, 1, 0x50, 0, 0x30, 0, 0, 0x0}, /* Freq 2422 */
+	{4, 	RF_G_BAND,	0x02, 0x3F, 0x28, 0xDD, 0xD4, 0x40, 0x02, 0x40, 0x09, 0, 0, 1, 0x50, 0, 0x30, 0, 0, 0x0}, /* Freq 2427 */
+	{5, 	RF_G_BAND,	0x02, 0x3F, 0x3C, 0xDD, 0xD4, 0x40, 0x07, 0x40, 0x02, 0, 0, 1, 0xA2, 0, 0x30, 0, 0, 0x1}, /* Freq 2432 */
+	{6, 	RF_G_BAND,	0x02, 0x3F, 0x3C, 0xDD, 0xD4, 0x40, 0x07, 0x40, 0x07, 0, 0, 1, 0xA2, 0, 0x30, 0, 0, 0x1}, /* Freq 2437 */
+	{7, 	RF_G_BAND,	0x02, 0x3F, 0x28, 0xDD, 0xE2, 0x40, 0x02, 0x40, 0x07, 0, 0, 1, 0x28, 0, 0x30, 0, 0, 0x3}, /* Freq 2442 */
+	{8, 	RF_G_BAND,	0x02, 0x3F, 0x3C, 0xDD, 0xD4, 0x40, 0x07, 0x40, 0x02, 0, 0, 1, 0xA3, 0, 0x30, 0, 0, 0x1}, /* Freq 2447 */
+	{9, 	RF_G_BAND,	0x02, 0x3F, 0x3C, 0xDD, 0xF2, 0x40, 0x07, 0x40, 0x0D, 0, 0, 1, 0x28, 0, 0x30, 0, 0, 0x3}, /* Freq 2452 */
+	{10, 	RF_G_BAND,	0x02, 0x3F, 0x28, 0xDD, 0xD4, 0x40, 0x02, 0x40, 0x09, 0, 0, 1, 0x51, 0, 0x30, 0, 0, 0x0}, /* Freq 2457 */
+	{11, 	RF_G_BAND,	0x02, 0x3F, 0x3C, 0xDD, 0xD4, 0x40, 0x07, 0x40, 0x02, 0, 0, 1, 0xA4, 0, 0x30, 0, 0, 0x1}, /* Freq 2462 */
+	{12, 	RF_G_BAND,	0x02, 0x3F, 0x3C, 0xDD, 0xD4, 0x40, 0x07, 0x40, 0x07, 0, 0, 1, 0xA4, 0, 0x30, 0, 0, 0x1}, /* Freq 2467 */
+	{13, 	RF_G_BAND,	0x02, 0x3F, 0x28, 0xDD, 0xF2, 0x40, 0x02, 0x40, 0x02, 0, 0, 1, 0x29, 0, 0x30, 0, 0, 0x3}, /* Freq 2472 */
+	{14, 	RF_G_BAND,	0x02, 0x3F, 0x28, 0xDD, 0xF2, 0x40, 0x02, 0x40, 0x04, 0, 0, 1, 0x29, 0, 0x30, 0, 0, 0x3}, /* Freq 2484 */
+
+	{183, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x70, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x17, 0, 0, 1, 0x28, 0, 0x30, 0, 0, 0x3}, /* Freq 4915 */
+	{184, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x00, 0, 0, 1, 0x29, 0, 0x30, 0, 0, 0x3}, /* Freq 4920 */
+	{185, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x01, 0, 0, 1, 0x29, 0, 0x30, 0, 0, 0x3}, /* Freq 4925 */
+	{187, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x03, 0, 0, 1, 0x29, 0, 0x30, 0, 0, 0x3}, /* Freq 4935 */
+	{188, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x02, 0, 0, 1, 0x29, 0, 0x30, 0, 0, 0x3}, /* Freq 4940 */
+	{189, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x05, 0, 0, 1, 0x29, 0, 0x30, 0, 0, 0x3}, /* Freq 4945 */
+	{192, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x04, 0, 0, 1, 0x29, 0, 0x30, 0, 0, 0x3}, /* Freq 4960 */
+	{196, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x06, 0, 0, 1, 0x29, 0, 0x30, 0, 0, 0x3}, /* Freq 4980 */
+
+	{36, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x02, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5180 */
+	{37, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x05, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5185 */
+	{38, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x03, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5190 */
+	{39, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x07, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5195 */
+	{40, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x04, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5200 */
+	{41, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x09, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5205 */
+	{42, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x05, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5210 */
+	{43, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0B, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5215 */
+	{44, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x06, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5220 */
+	{45, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0D, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5225 */
+	{46, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x07, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5230 */
+	{47, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0F, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5235 */
+	{48, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x08, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5240 */
+	{49, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x11, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5245 */
+	{50, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x09, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5250 */
+	{51, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x13, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5255 */
+	{52, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x0A, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5260 */
+	{53, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x15, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5265 */
+	{54, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x0B, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5270 */
+	{55, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x70, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x17, 0, 0, 1, 0x2B, 0, 0x30, 0, 0, 0x3}, /* Freq 5275 */
+	{56, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x00, 0, 0, 1, 0x2C, 0, 0x30, 0, 0, 0x3}, /* Freq 5280 */
+	{57, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x01, 0, 0, 1, 0x2C, 0, 0x30, 0, 0, 0x3}, /* Freq 5285 */
+	{58, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x01, 0, 0, 1, 0x2C, 0, 0x30, 0, 0, 0x3}, /* Freq 5290 */
+	{59, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x03, 0, 0, 1, 0x2C, 0, 0x30, 0, 0, 0x3}, /* Freq 5295 */
+	{60, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x02, 0, 0, 1, 0x2C, 0, 0x30, 0, 0, 0x3}, /* Freq 5300 */
+	{61, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x05, 0, 0, 1, 0x2C, 0, 0x30, 0, 0, 0x3}, /* Freq 5305 */
+	{62, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x03, 0, 0, 1, 0x2C, 0, 0x30, 0, 0, 0x3}, /* Freq 5310 */
+	{63, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x07, 0, 0, 1, 0x2C, 0, 0x30, 0, 0, 0x3}, /* Freq 5315 */
+	{64, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x04, 0, 0, 1, 0x2C, 0, 0x30, 0, 0, 0x3}, /* Freq 5320 */
+
+	{100, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x0A, 0, 0, 1, 0x2D, 0, 0x30, 0, 0, 0x3}, /* Freq 5500 */
+	{101, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x15, 0, 0, 1, 0x2D, 0, 0x30, 0, 0, 0x3}, /* Freq 5505 */
+	{102, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x0B, 0, 0, 1, 0x2D, 0, 0x30, 0, 0, 0x3}, /* Freq 5510 */
+	{103, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x70, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x17, 0, 0, 1, 0x2D, 0, 0x30, 0, 0, 0x3}, /* Freq 5515 */
+	{104, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x00, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5520 */
+	{105, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x01, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5525 */
+	{106, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x01, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5530 */
+	{107, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x03, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5535 */
+	{108, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x02, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5540 */
+	{109, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x05, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5545 */
+	{110, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x03, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5550 */
+	{111, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x07, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5555 */
+	{112, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x04, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5560 */
+	{113, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x09, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5565 */
+	{114, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x05, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5570 */
+	{115, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0B, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5575 */
+	{116, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x06, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5580 */
+	{117, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0D, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5585 */
+	{118, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x07, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5590 */
+	{119, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0F, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5595 */
+	{120, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x08, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5600 */
+	{121, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x11, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5605 */
+	{122, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x09, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5610 */
+	{123, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x13, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5615 */
+	{124, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x0A, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5620 */
+	{125, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x15, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5625 */
+	{126, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x0B, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5630 */
+	{127, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x70, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x17, 0, 0, 1, 0x2E, 0, 0x30, 0, 0, 0x3}, /* Freq 5635 */
+	{128, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x00, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5640 */
+	{129, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x01, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5645 */
+	{130, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x01, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5650 */
+	{131, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x03, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5655 */
+	{132, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x02, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5660 */
+	{133, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x05, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5665 */
+	{134, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x03, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5670 */
+	{135, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x07, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5675 */
+	{136, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x04, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5680 */
+
+	{137, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x09, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5685 */
+	{138, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x05, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5690 */
+	{139, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0B, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5695 */
+	{140, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x06, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5700 */
+	{141, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0D, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5705 */
+	{142, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x07, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5710 */
+	{143, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0F, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5715 */
+	{144, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x08, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5720 */
+	{145, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x11, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5725 */
+	{146, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x09, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5730 */
+	{147, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x13, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5735 */
+	{148, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x0A, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5740 */
+	{149, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x15, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5745 */
+	{150, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x0B, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5750 */
+	{151, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x70, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x17, 0, 0, 1, 0x2F, 0, 0x30, 0, 0, 0x3}, /* Freq 5755 */
+	{152, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x00, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5760 */
+	{153, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x01, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5765 */
+	{154, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x01, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5770 */
+	{155, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x03, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5775 */
+	{156, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x02, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5780 */
+	{157, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x05, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5785 */
+	{158, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x03, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5790 */
+	{159, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x07, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5795 */
+	{160, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x04, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5800 */
+	{161, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x09, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5805 */
+	{162, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x05, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5810 */
+	{163, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0B, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5815 */
+	{164, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x06, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5820 */
+	{165, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0D, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5825 */
+	{166, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0xDD, 0xD2, 0x40, 0x04, 0x40, 0x07, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5830 */
+	{167, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x0F, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5835 */
+	{168, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x08, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5840 */
+	{169, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x11, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5845 */
+	{170, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x09, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5850 */
+	{171, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x13, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5855 */
+	{172, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x30, 0x97, 0xD2, 0x40, 0x04, 0x40, 0x0A, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5860 */
+	{173, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x68, 0xDD, 0xD2, 0x40, 0x10, 0x40, 0x15, 0, 0, 1, 0x30, 0, 0x30, 0, 0, 0x3}, /* Freq 5865 */
+};
+
+static const struct mt76x0_freq_item mt76x0_sdm_frequency_plan[] = {
+	{1,	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0xCCCC,  0x3}, /* Freq 2412 */
+	{2, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x12222, 0x3}, /* Freq 2417 */
+	{3, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x17777, 0x3}, /* Freq 2422 */
+	{4, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x1CCCC, 0x3}, /* Freq 2427 */
+	{5, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x22222, 0x3}, /* Freq 2432 */
+	{6, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x27777, 0x3}, /* Freq 2437 */
+	{7, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x2CCCC, 0x3}, /* Freq 2442 */
+	{8, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x32222, 0x3}, /* Freq 2447 */
+	{9, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x37777, 0x3}, /* Freq 2452 */
+	{10, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x3CCCC, 0x3}, /* Freq 2457 */
+	{11, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0x2222, 0x3}, /* Freq 2462 */
+	{12, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0x7777, 0x3}, /* Freq 2467 */
+	{13, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0xCCCC, 0x3}, /* Freq 2472 */
+	{14, 	RF_G_BAND,	0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0x19999, 0x3}, /* Freq 2484 */
+
+	{183, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x28, 0, 0x0, 0x8, 0x3D555, 0x3}, /* Freq 4915 */
+	{184, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0x0,     0x3}, /* Freq 4920 */
+	{185, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0x2AAA,  0x3}, /* Freq 4925 */
+	{187, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0x8000,  0x3}, /* Freq 4935 */
+	{188, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0xAAAA,  0x3}, /* Freq 4940 */
+	{189, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0xD555,  0x3}, /* Freq 4945 */
+	{192, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0x15555, 0x3}, /* Freq 4960 */
+	{196, 	(RF_A_BAND | RF_A_BAND_11J), 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x29, 0, 0x0, 0x8, 0x20000, 0x3}, /* Freq 4980 */
+
+	{36, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0xAAAA,  0x3}, /* Freq 5180 */
+	{37, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0xD555,  0x3}, /* Freq 5185 */
+	{38, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x10000, 0x3}, /* Freq 5190 */
+	{39, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x12AAA, 0x3}, /* Freq 5195 */
+	{40, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x15555, 0x3}, /* Freq 5200 */
+	{41, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x18000, 0x3}, /* Freq 5205 */
+	{42, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x1AAAA, 0x3}, /* Freq 5210 */
+	{43, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x1D555, 0x3}, /* Freq 5215 */
+	{44, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x20000, 0x3}, /* Freq 5220 */
+	{45, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x22AAA, 0x3}, /* Freq 5225 */
+	{46, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x25555, 0x3}, /* Freq 5230 */
+	{47, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x28000, 0x3}, /* Freq 5235 */
+	{48, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x2AAAA, 0x3}, /* Freq 5240 */
+	{49, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x2D555, 0x3}, /* Freq 5245 */
+	{50, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x30000, 0x3}, /* Freq 5250 */
+	{51, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x32AAA, 0x3}, /* Freq 5255 */
+	{52, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x35555, 0x3}, /* Freq 5260 */
+	{53, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x38000, 0x3}, /* Freq 5265 */
+	{54, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x3AAAA, 0x3}, /* Freq 5270 */
+	{55, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2B, 0, 0x0, 0x8, 0x3D555, 0x3}, /* Freq 5275 */
+	{56, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2C, 0, 0x0, 0x8, 0x00000, 0x3}, /* Freq 5280 */
+	{57, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2C, 0, 0x0, 0x8, 0x02AAA, 0x3}, /* Freq 5285 */
+	{58, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2C, 0, 0x0, 0x8, 0x05555, 0x3}, /* Freq 5290 */
+	{59, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2C, 0, 0x0, 0x8, 0x08000, 0x3}, /* Freq 5295 */
+	{60, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2C, 0, 0x0, 0x8, 0x0AAAA, 0x3}, /* Freq 5300 */
+	{61, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2C, 0, 0x0, 0x8, 0x0D555, 0x3}, /* Freq 5305 */
+	{62, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2C, 0, 0x0, 0x8, 0x10000, 0x3}, /* Freq 5310 */
+	{63, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2C, 0, 0x0, 0x8, 0x12AAA, 0x3}, /* Freq 5315 */
+	{64, 	(RF_A_BAND | RF_A_BAND_LB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2C, 0, 0x0, 0x8, 0x15555, 0x3}, /* Freq 5320 */
+
+	{100, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2D, 0, 0x0, 0x8, 0x35555, 0x3}, /* Freq 5500 */
+	{101, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2D, 0, 0x0, 0x8, 0x38000, 0x3}, /* Freq 5505 */
+	{102, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2D, 0, 0x0, 0x8, 0x3AAAA, 0x3}, /* Freq 5510 */
+	{103, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2D, 0, 0x0, 0x8, 0x3D555, 0x3}, /* Freq 5515 */
+	{104, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x00000, 0x3}, /* Freq 5520 */
+	{105, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x02AAA, 0x3}, /* Freq 5525 */
+	{106, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x05555, 0x3}, /* Freq 5530 */
+	{107, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x08000, 0x3}, /* Freq 5535 */
+	{108, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x0AAAA, 0x3}, /* Freq 5540 */
+	{109, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x0D555, 0x3}, /* Freq 5545 */
+	{110, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x10000, 0x3}, /* Freq 5550 */
+	{111, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x12AAA, 0x3}, /* Freq 5555 */
+	{112, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x15555, 0x3}, /* Freq 5560 */
+	{113, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x18000, 0x3}, /* Freq 5565 */
+	{114, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x1AAAA, 0x3}, /* Freq 5570 */
+	{115, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x1D555, 0x3}, /* Freq 5575 */
+	{116, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x20000, 0x3}, /* Freq 5580 */
+	{117, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x22AAA, 0x3}, /* Freq 5585 */
+	{118, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x25555, 0x3}, /* Freq 5590 */
+	{119, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x28000, 0x3}, /* Freq 5595 */
+	{120, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x2AAAA, 0x3}, /* Freq 5600 */
+	{121, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x2D555, 0x3}, /* Freq 5605 */
+	{122, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x30000, 0x3}, /* Freq 5610 */
+	{123, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x32AAA, 0x3}, /* Freq 5615 */
+	{124, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x35555, 0x3}, /* Freq 5620 */
+	{125, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x38000, 0x3}, /* Freq 5625 */
+	{126, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x3AAAA, 0x3}, /* Freq 5630 */
+	{127, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2E, 0, 0x0, 0x8, 0x3D555, 0x3}, /* Freq 5635 */
+	{128, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x00000, 0x3}, /* Freq 5640 */
+	{129, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x02AAA, 0x3}, /* Freq 5645 */
+	{130, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x05555, 0x3}, /* Freq 5650 */
+	{131, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x08000, 0x3}, /* Freq 5655 */
+	{132, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x0AAAA, 0x3}, /* Freq 5660 */
+	{133, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x0D555, 0x3}, /* Freq 5665 */
+	{134, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x10000, 0x3}, /* Freq 5670 */
+	{135, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x12AAA, 0x3}, /* Freq 5675 */
+	{136, 	(RF_A_BAND | RF_A_BAND_MB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x15555, 0x3}, /* Freq 5680 */
+
+	{137, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x18000, 0x3}, /* Freq 5685 */
+	{138, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x1AAAA, 0x3}, /* Freq 5690 */
+	{139, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x1D555, 0x3}, /* Freq 5695 */
+	{140, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x20000, 0x3}, /* Freq 5700 */
+	{141, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x22AAA, 0x3}, /* Freq 5705 */
+	{142, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x25555, 0x3}, /* Freq 5710 */
+	{143, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x28000, 0x3}, /* Freq 5715 */
+	{144, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x2AAAA, 0x3}, /* Freq 5720 */
+	{145, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x2D555, 0x3}, /* Freq 5725 */
+	{146, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x30000, 0x3}, /* Freq 5730 */
+	{147, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x32AAA, 0x3}, /* Freq 5735 */
+	{148, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x35555, 0x3}, /* Freq 5740 */
+	{149, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x38000, 0x3}, /* Freq 5745 */
+	{150, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x3AAAA, 0x3}, /* Freq 5750 */
+	{151, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x2F, 0, 0x0, 0x8, 0x3D555, 0x3}, /* Freq 5755 */
+	{152, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x00000, 0x3}, /* Freq 5760 */
+	{153, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x02AAA, 0x3}, /* Freq 5765 */
+	{154, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x05555, 0x3}, /* Freq 5770 */
+	{155, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x08000, 0x3}, /* Freq 5775 */
+	{156, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x0AAAA, 0x3}, /* Freq 5780 */
+	{157, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x0D555, 0x3}, /* Freq 5785 */
+	{158, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x10000, 0x3}, /* Freq 5790 */
+	{159, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x12AAA, 0x3}, /* Freq 5795 */
+	{160, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x15555, 0x3}, /* Freq 5800 */
+	{161, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x18000, 0x3}, /* Freq 5805 */
+	{162, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x1AAAA, 0x3}, /* Freq 5810 */
+	{163, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x1D555, 0x3}, /* Freq 5815 */
+	{164, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x20000, 0x3}, /* Freq 5820 */
+	{165, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x22AAA, 0x3}, /* Freq 5825 */
+	{166, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x25555, 0x3}, /* Freq 5830 */
+	{167, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x28000, 0x3}, /* Freq 5835 */
+	{168, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x2AAAA, 0x3}, /* Freq 5840 */
+	{169, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x2D555, 0x3}, /* Freq 5845 */
+	{170, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x30000, 0x3}, /* Freq 5850 */
+	{171, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x32AAA, 0x3}, /* Freq 5855 */
+	{172, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x35555, 0x3}, /* Freq 5860 */
+	{173, 	(RF_A_BAND | RF_A_BAND_HB),	 0x02, 0x3F, 0x7F, 0xDD, 0xC3, 0x40, 0x0, 0x80, 0x0, 0/*0 -> 1*/, 0, 0, 0x30, 0, 0x0, 0x8, 0x38000, 0x3}, /* Freq 5865 */
+};
+
+static const u8 mt76x0_sdm_channel[] = {
+	183, 185, 43, 45, 54, 55, 57, 58, 102, 103, 105, 106, 115, 117, 126, 127, 129, 130, 139, 141, 150, 151, 153, 154, 163, 165
+};
+
+static const struct mt76x0_rf_switch_item mt76x0_rf_ext_pa_tab[] = {
+	{ MT_RF(6, 45),		RF_A_BAND_LB,	0x63},
+	{ MT_RF(6, 45),		RF_A_BAND_MB,	0x43},
+	{ MT_RF(6, 45),		RF_A_BAND_HB,	0x33},
+	{ MT_RF(6, 45),		RF_A_BAND_11J,	0x73},
+
+	{ MT_RF(6, 50),		RF_A_BAND_LB,	0x02},
+	{ MT_RF(6, 50),		RF_A_BAND_MB,	0x02},
+	{ MT_RF(6, 50),		RF_A_BAND_HB,	0x02},
+	{ MT_RF(6, 50),		RF_A_BAND_11J,	0x02},
+
+	{ MT_RF(6, 51),		RF_A_BAND_LB,	0x02},
+	{ MT_RF(6, 51),		RF_A_BAND_MB,	0x02},
+	{ MT_RF(6, 51),		RF_A_BAND_HB,	0x02},
+	{ MT_RF(6, 51),		RF_A_BAND_11J,	0x02},
+
+	{ MT_RF(6, 52),		RF_A_BAND_LB,	0x08},
+	{ MT_RF(6, 52),		RF_A_BAND_MB,	0x08},
+	{ MT_RF(6, 52),		RF_A_BAND_HB,	0x08},
+	{ MT_RF(6, 52),		RF_A_BAND_11J,	0x08},
+
+	{ MT_RF(6, 53),		RF_A_BAND_LB,	0x08},
+	{ MT_RF(6, 53),		RF_A_BAND_MB,	0x08},
+	{ MT_RF(6, 53),		RF_A_BAND_HB,	0x08},
+	{ MT_RF(6, 53),		RF_A_BAND_11J,	0x08},
+
+	{ MT_RF(6, 54),		RF_A_BAND_LB,	0x0A},
+	{ MT_RF(6, 54),		RF_A_BAND_MB,	0x0A},
+	{ MT_RF(6, 54),		RF_A_BAND_HB,	0x0A},
+	{ MT_RF(6, 54),		RF_A_BAND_11J,	0x0A},
+
+	{ MT_RF(6, 55),		RF_A_BAND_LB,	0x0A},
+	{ MT_RF(6, 55),		RF_A_BAND_MB,	0x0A},
+	{ MT_RF(6, 55),		RF_A_BAND_HB,	0x0A},
+	{ MT_RF(6, 55),		RF_A_BAND_11J,	0x0A},
+
+	{ MT_RF(6, 56),		RF_A_BAND_LB,	0x05},
+	{ MT_RF(6, 56),		RF_A_BAND_MB,	0x05},
+	{ MT_RF(6, 56),		RF_A_BAND_HB,	0x05},
+	{ MT_RF(6, 56),		RF_A_BAND_11J,	0x05},
+
+	{ MT_RF(6, 57),		RF_A_BAND_LB,	0x05},
+	{ MT_RF(6, 57),		RF_A_BAND_MB,	0x05},
+	{ MT_RF(6, 57),		RF_A_BAND_HB,	0x05},
+	{ MT_RF(6, 57),		RF_A_BAND_11J,	0x05},
+
+	{ MT_RF(6, 58),		RF_A_BAND_LB,	0x05},
+	{ MT_RF(6, 58),		RF_A_BAND_MB,	0x03},
+	{ MT_RF(6, 58),		RF_A_BAND_HB,	0x02},
+	{ MT_RF(6, 58),		RF_A_BAND_11J,	0x07},
+
+	{ MT_RF(6, 59),		RF_A_BAND_LB,	0x05},
+	{ MT_RF(6, 59),		RF_A_BAND_MB,	0x03},
+	{ MT_RF(6, 59),		RF_A_BAND_HB,	0x02},
+	{ MT_RF(6, 59),		RF_A_BAND_11J,	0x07},
+};
+
+#endif
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
new file mode 100644
index 000000000000..083028048723
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -0,0 +1,1008 @@
+/*
+ * (c) Copyright 2002-2010, Ralink Technology, Inc.
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt76x0.h"
+#include "mcu.h"
+#include "eeprom.h"
+#include "trace.h"
+#include "phy.h"
+#include "initvals.h"
+#include "initvals_phy.h"
+
+#include <linux/etherdevice.h>
+
+static int
+mt76x0_rf_csr_wr(struct mt76x0_dev *dev, u32 offset, u8 value)
+{
+	int ret = 0;
+	u8 bank, reg;
+
+	if (test_bit(MT76_REMOVED, &dev->mt76.state))
+		return -ENODEV;
+
+	bank = MT_RF_BANK(offset);
+	reg = MT_RF_REG(offset);
+
+	if (WARN_ON_ONCE(reg > 64) || WARN_ON_ONCE(bank) > 8)
+		return -EINVAL;
+
+	mutex_lock(&dev->reg_atomic_mutex);
+
+	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) {
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	mt76_wr(dev, MT_RF_CSR_CFG,
+		   FIELD_PREP(MT_RF_CSR_CFG_DATA, value) |
+		   FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
+		   FIELD_PREP(MT_RF_CSR_CFG_REG_ID, reg) |
+		   MT_RF_CSR_CFG_WR |
+		   MT_RF_CSR_CFG_KICK);
+	trace_rf_write(&dev->mt76, bank, offset, value);
+out:
+	mutex_unlock(&dev->reg_atomic_mutex);
+
+	if (ret < 0)
+		dev_err(dev->mt76.dev, "Error: RF write %d:%d failed:%d!!\n",
+			bank, reg, ret);
+
+	return ret;
+}
+
+static int
+mt76x0_rf_csr_rr(struct mt76x0_dev *dev, u32 offset)
+{
+	int ret = -ETIMEDOUT;
+	u32 val;
+	u8 bank, reg;
+
+	if (test_bit(MT76_REMOVED, &dev->mt76.state))
+		return -ENODEV;
+
+	bank = MT_RF_BANK(offset);
+	reg = MT_RF_REG(offset);
+
+	if (WARN_ON_ONCE(reg > 64) || WARN_ON_ONCE(bank) > 8)
+		return -EINVAL;
+
+	mutex_lock(&dev->reg_atomic_mutex);
+
+	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
+		goto out;
+
+	mt76_wr(dev, MT_RF_CSR_CFG,
+		   FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
+		   FIELD_PREP(MT_RF_CSR_CFG_REG_ID, reg) |
+		   MT_RF_CSR_CFG_KICK);
+
+	if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
+		goto out;
+
+	val = mt76_rr(dev, MT_RF_CSR_CFG);
+	if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == reg &&
+	    FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) {
+		ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val);
+		trace_rf_read(&dev->mt76, bank, offset, ret);
+	}
+out:
+	mutex_unlock(&dev->reg_atomic_mutex);
+
+	if (ret < 0)
+		dev_err(dev->mt76.dev, "Error: RF read %d:%d failed:%d!!\n",
+			bank, reg, ret);
+
+	return ret;
+}
+
+static int
+rf_wr(struct mt76x0_dev *dev, u32 offset, u8 val)
+{
+	if (test_bit(MT76_STATE_MCU_RUNNING, &dev->mt76.state)) {
+		struct mt76_reg_pair pair = {
+			.reg = offset,
+			.value = val,
+		};
+
+		return mt76x0_write_reg_pairs(dev, MT_MCU_MEMMAP_RF, &pair, 1);
+	} else {
+		WARN_ON_ONCE(1);
+		return mt76x0_rf_csr_wr(dev, offset, val);
+	}
+}
+
+static int
+rf_rr(struct mt76x0_dev *dev, u32 offset)
+{
+	int ret;
+	u32 val;
+
+	if (test_bit(MT76_STATE_MCU_RUNNING, &dev->mt76.state)) {
+		struct mt76_reg_pair pair = {
+			.reg = offset,
+		};
+
+		ret = mt76x0_read_reg_pairs(dev, MT_MCU_MEMMAP_RF, &pair, 1);
+		val = pair.value;
+	} else {
+		WARN_ON_ONCE(1);
+		ret = val = mt76x0_rf_csr_rr(dev, offset);
+	}
+
+	return (ret < 0) ? ret : val;
+}
+
+static int
+rf_rmw(struct mt76x0_dev *dev, u32 offset, u8 mask, u8 val)
+{
+	int ret;
+
+	ret = rf_rr(dev, offset);
+	if (ret < 0)
+		return ret;
+	val |= ret & ~mask;
+	ret = rf_wr(dev, offset, val);
+	if (ret)
+		return ret;
+
+	return val;
+}
+
+static int
+rf_set(struct mt76x0_dev *dev, u32 offset, u8 val)
+{
+	return rf_rmw(dev, offset, 0, val);
+}
+
+#if 0
+static int
+rf_clear(struct mt76x0_dev *dev, u32 offset, u8 mask)
+{
+	return rf_rmw(dev, offset, mask, 0);
+}
+#endif
+
+#define RF_RANDOM_WRITE(dev, tab) \
+	mt76x0_write_reg_pairs(dev, MT_MCU_MEMMAP_RF, tab, ARRAY_SIZE(tab));
+
+int mt76x0_wait_bbp_ready(struct mt76x0_dev *dev)
+{
+	int i = 20;
+	u32 val;
+
+	do {
+		val = mt76_rr(dev, MT_BBP(CORE, 0));
+		printk("BBP version %08x\n", val);
+		if (val && ~val)
+			break;
+	} while (--i);
+
+	if (!i) {
+		dev_err(dev->mt76.dev, "Error: BBP is not ready\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void
+mt76x0_bbp_set_ctrlch(struct mt76x0_dev *dev, enum nl80211_chan_width width,
+		      u8 ctrl)
+{
+	int core_val, agc_val;
+
+	switch (width) {
+	case NL80211_CHAN_WIDTH_80:
+		core_val = 3;
+		agc_val = 7;
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		core_val = 2;
+		agc_val = 3;
+		break;
+	default:
+		core_val = 0;
+		agc_val = 1;
+		break;
+	}
+
+	mt76_rmw_field(dev, MT_BBP(CORE, 1), MT_BBP_CORE_R1_BW, core_val);
+	mt76_rmw_field(dev, MT_BBP(AGC, 0), MT_BBP_AGC_R0_BW, agc_val);
+	mt76_rmw_field(dev, MT_BBP(AGC, 0), MT_BBP_AGC_R0_CTRL_CHAN, ctrl);
+	mt76_rmw_field(dev, MT_BBP(TXBE, 0), MT_BBP_TXBE_R0_CTRL_CHAN, ctrl);
+}
+
+int mt76x0_phy_get_rssi(struct mt76x0_dev *dev, struct mt76x0_rxwi *rxwi)
+{
+	s8 lna_gain, rssi_offset;
+	int val;
+
+	if (dev->mt76.chandef.chan->band == NL80211_BAND_2GHZ) {
+		lna_gain = dev->ee->lna_gain_2ghz;
+		rssi_offset = dev->ee->rssi_offset_2ghz[0];
+	} else {
+		lna_gain = dev->ee->lna_gain_5ghz[0];
+		rssi_offset = dev->ee->rssi_offset_5ghz[0];
+	}
+
+	val = rxwi->rssi[0] + rssi_offset - lna_gain;
+
+	return val;
+}
+
+static void mt76x0_vco_cal(struct mt76x0_dev *dev, u8 channel)
+{
+	u8 val;
+
+	val = rf_rr(dev, MT_RF(0, 4));
+	if ((val & 0x70) != 0x30)
+		return;
+
+	/*
+	 * Calibration Mode - Open loop, closed loop, and amplitude:
+	 * B0.R06.[0]: 1
+	 * B0.R06.[3:1] bp_close_code: 100
+	 * B0.R05.[7:0] bp_open_code: 0x0
+	 * B0.R04.[2:0] cal_bits: 000
+	 * B0.R03.[2:0] startup_time: 011
+	 * B0.R03.[6:4] settle_time:
+	 *  80MHz channel: 110
+	 *  40MHz channel: 101
+	 *  20MHz channel: 100
+	 */
+	val = rf_rr(dev, MT_RF(0, 6));
+	val &= ~0xf;
+	val |= 0x09;
+	rf_wr(dev, MT_RF(0, 6), val);
+
+	val = rf_rr(dev, MT_RF(0, 5));
+	if (val != 0)
+		rf_wr(dev, MT_RF(0, 5), 0x0);
+
+	val = rf_rr(dev, MT_RF(0, 4));
+	val &= ~0x07;
+	rf_wr(dev, MT_RF(0, 4), val);
+
+	val = rf_rr(dev, MT_RF(0, 3));
+	val &= ~0x77;
+	if (channel == 1 || channel == 7 || channel == 9 || channel >= 13) {
+		val |= 0x63;
+	} else if (channel == 3 || channel == 4 || channel == 10) {
+		val |= 0x53;
+	} else if (channel == 2 || channel == 5 || channel == 6 ||
+		   channel == 8 || channel == 11 || channel == 12) {
+		val |= 0x43;
+	} else {
+		WARN(1, "Unknown channel %u\n", channel);
+		return;
+	}
+	rf_wr(dev, MT_RF(0, 3), val);
+
+	/* TODO replace by mt76x0_rf_set(dev, MT_RF(0, 4), BIT(7)); */
+	val = rf_rr(dev, MT_RF(0, 4));
+	val = ((val & ~(0x80)) | 0x80);
+	rf_wr(dev, MT_RF(0, 4), val);
+
+	msleep(2);
+}
+
+static void
+mt76x0_mac_set_ctrlch(struct mt76x0_dev *dev, bool primary_upper)
+{
+	mt76_rmw_field(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_UPPER_40M,
+		       primary_upper);
+}
+
+static void
+mt76x0_phy_set_band(struct mt76x0_dev *dev, enum nl80211_band band)
+{
+	switch (band) {
+	case NL80211_BAND_2GHZ:
+		RF_RANDOM_WRITE(dev, mt76x0_rf_2g_channel_0_tab);
+
+		rf_wr(dev, MT_RF(5, 0), 0x45);
+		rf_wr(dev, MT_RF(6, 0), 0x44);
+
+		mt76_set(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_2G);
+		mt76_clear(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_5G);
+
+		mt76_wr(dev, MT_TX_ALC_VGA3, 0x00050007);
+		mt76_wr(dev, MT_TX0_RF_GAIN_CORR, 0x003E0002);
+		break;
+	case NL80211_BAND_5GHZ:
+		RF_RANDOM_WRITE(dev, mt76x0_rf_5g_channel_0_tab);
+
+		rf_wr(dev, MT_RF(5, 0), 0x44);
+		rf_wr(dev, MT_RF(6, 0), 0x45);
+
+		mt76_clear(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_2G);
+		mt76_set(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_5G);
+
+		mt76_wr(dev, MT_TX_ALC_VGA3, 0x00000005);
+		mt76_wr(dev, MT_TX0_RF_GAIN_CORR, 0x01010102);
+		break;
+	default:
+		break;
+	}
+}
+
+#define EXT_PA_2G_5G            0x0
+#define EXT_PA_5G_ONLY          0x1
+#define EXT_PA_2G_ONLY          0x2
+#define INT_PA_2G_5G            0x3
+
+static void
+mt76x0_phy_set_chan_rf_params(struct mt76x0_dev *dev, u8 channel, u16 rf_bw_band)
+{
+	u16 rf_band = rf_bw_band & 0xff00;
+	u16 rf_bw = rf_bw_band & 0x00ff;
+	u32 mac_reg;
+	u8 rf_val;
+	int i;
+	bool bSDM = false;
+	const struct mt76x0_freq_item *freq_item;
+
+	for (i = 0; i < ARRAY_SIZE(mt76x0_sdm_channel); i++) {
+		if (channel == mt76x0_sdm_channel[i]) {
+			bSDM = true;
+			break;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(mt76x0_frequency_plan); i++) {
+		if (channel == mt76x0_frequency_plan[i].channel) {
+			rf_band = mt76x0_frequency_plan[i].band;
+
+			if (bSDM)
+				freq_item = &(mt76x0_sdm_frequency_plan[i]);
+			else
+				freq_item = &(mt76x0_frequency_plan[i]);
+
+			rf_wr(dev, MT_RF(0, 37), freq_item->pllR37);
+			rf_wr(dev, MT_RF(0, 36), freq_item->pllR36);
+			rf_wr(dev, MT_RF(0, 35), freq_item->pllR35);
+			rf_wr(dev, MT_RF(0, 34), freq_item->pllR34);
+			rf_wr(dev, MT_RF(0, 33), freq_item->pllR33);
+
+			rf_val = rf_rr(dev, MT_RF(0, 32));
+			rf_val &= ~0xE0;
+			rf_val |= freq_item->pllR32_b7b5;
+			rf_wr(dev, MT_RF(0, 32), rf_val);
+
+			/* R32<4:0> pll_den: (Denomina - 8) */
+			rf_val = rf_rr(dev, MT_RF(0, 32));
+			rf_val &= ~0x1F;
+			rf_val |= freq_item->pllR32_b4b0;
+			rf_wr(dev, MT_RF(0, 32), rf_val);
+
+			/* R31<7:5> */
+			rf_val = rf_rr(dev, MT_RF(0, 31));
+			rf_val &= ~0xE0;
+			rf_val |= freq_item->pllR31_b7b5;
+			rf_wr(dev, MT_RF(0, 31), rf_val);
+
+			/* R31<4:0> pll_k(Nominator) */
+			rf_val = rf_rr(dev, MT_RF(0, 31));
+			rf_val &= ~0x1F;
+			rf_val |= freq_item->pllR31_b4b0;
+			rf_wr(dev, MT_RF(0, 31), rf_val);
+
+			/* R30<7> sdm_reset_n */
+			rf_val = rf_rr(dev, MT_RF(0, 30));
+			rf_val &= ~0x80;
+			if (bSDM) {
+				rf_wr(dev, MT_RF(0, 30), rf_val);
+				rf_val |= 0x80;
+				rf_wr(dev, MT_RF(0, 30), rf_val);
+			} else {
+				rf_val |= freq_item->pllR30_b7;
+				rf_wr(dev, MT_RF(0, 30), rf_val);
+			}
+
+			/* R30<6:2> sdmmash_prbs,sin */
+			rf_val = rf_rr(dev, MT_RF(0, 30));
+			rf_val &= ~0x7C;
+			rf_val |= freq_item->pllR30_b6b2;
+			rf_wr(dev, MT_RF(0, 30), rf_val);
+
+			/* R30<1> sdm_bp */
+			rf_val = rf_rr(dev, MT_RF(0, 30));
+			rf_val &= ~0x02;
+			rf_val |= (freq_item->pllR30_b1 << 1);
+			rf_wr(dev, MT_RF(0, 30), rf_val);
+
+			/* R30<0> R29<7:0> (hex) pll_n */
+			rf_val = freq_item->pll_n & 0x00FF;
+			rf_wr(dev, MT_RF(0, 29), rf_val);
+
+			rf_val = rf_rr(dev, MT_RF(0, 30));
+			rf_val &= ~0x1;
+			rf_val |= ((freq_item->pll_n >> 8) & 0x0001);
+			rf_wr(dev, MT_RF(0, 30), rf_val);
+
+			/* R28<7:6> isi_iso */
+			rf_val = rf_rr(dev, MT_RF(0, 28));
+			rf_val &= ~0xC0;
+			rf_val |= freq_item->pllR28_b7b6;
+			rf_wr(dev, MT_RF(0, 28), rf_val);
+
+			/* R28<5:4> pfd_dly */
+			rf_val = rf_rr(dev, MT_RF(0, 28));
+			rf_val &= ~0x30;
+			rf_val |= freq_item->pllR28_b5b4;
+			rf_wr(dev, MT_RF(0, 28), rf_val);
+
+			/* R28<3:2> clksel option */
+			rf_val = rf_rr(dev, MT_RF(0, 28));
+			rf_val &= ~0x0C;
+			rf_val |= freq_item->pllR28_b3b2;
+			rf_wr(dev, MT_RF(0, 28), rf_val);
+
+			/* R28<1:0> R27<7:0> R26<7:0> (hex) sdm_k */
+			rf_val = freq_item->pll_sdm_k & 0x000000FF;
+			rf_wr(dev, MT_RF(0, 26), rf_val);
+
+			rf_val = ((freq_item->pll_sdm_k >> 8) & 0x000000FF);
+			rf_wr(dev, MT_RF(0, 27), rf_val);
+
+			rf_val = rf_rr(dev, MT_RF(0, 28));
+			rf_val &= ~0x3;
+			rf_val |= ((freq_item->pll_sdm_k >> 16) & 0x0003);
+			rf_wr(dev, MT_RF(0, 28), rf_val);
+
+			/* R24<1:0> xo_div */
+			rf_val = rf_rr(dev, MT_RF(0, 24));
+			rf_val &= ~0x3;
+			rf_val |= freq_item->pllR24_b1b0;
+			rf_wr(dev, MT_RF(0, 24), rf_val);
+
+			break;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(mt76x0_rf_bw_switch_tab); i++) {
+		if (rf_bw == mt76x0_rf_bw_switch_tab[i].bw_band) {
+			rf_wr(dev, mt76x0_rf_bw_switch_tab[i].rf_bank_reg,
+				   mt76x0_rf_bw_switch_tab[i].value);
+		} else if ((rf_bw == (mt76x0_rf_bw_switch_tab[i].bw_band & 0xFF)) &&
+			   (rf_band & mt76x0_rf_bw_switch_tab[i].bw_band)) {
+			rf_wr(dev, mt76x0_rf_bw_switch_tab[i].rf_bank_reg,
+				   mt76x0_rf_bw_switch_tab[i].value);
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(mt76x0_rf_band_switch_tab); i++) {
+		if (mt76x0_rf_band_switch_tab[i].bw_band & rf_band) {
+			rf_wr(dev, mt76x0_rf_band_switch_tab[i].rf_bank_reg,
+				   mt76x0_rf_band_switch_tab[i].value);
+		}
+	}
+
+	mac_reg = mt76_rr(dev, MT_RF_MISC);
+	mac_reg &= ~0xC; /* Clear 0x518[3:2] */
+	mt76_wr(dev, MT_RF_MISC, mac_reg);
+
+	if (dev->ee->pa_type == INT_PA_2G_5G ||
+	    (dev->ee->pa_type == EXT_PA_5G_ONLY && (rf_band & RF_G_BAND)) ||
+	    (dev->ee->pa_type == EXT_PA_2G_ONLY && (rf_band & RF_A_BAND))) {
+		; /* Internal PA - nothing to do. */
+	} else {
+		/*
+			MT_RF_MISC (offset: 0x0518)
+			[2]1'b1: enable external A band PA, 1'b0: disable external A band PA
+			[3]1'b1: enable external G band PA, 1'b0: disable external G band PA
+		*/
+		if (rf_band & RF_A_BAND) {
+			mac_reg = mt76_rr(dev, MT_RF_MISC);
+			mac_reg |= 0x4;
+			mt76_wr(dev, MT_RF_MISC, mac_reg);
+		} else {
+			mac_reg = mt76_rr(dev, MT_RF_MISC);
+			mac_reg |= 0x8;
+			mt76_wr(dev, MT_RF_MISC, mac_reg);
+		}
+
+		/* External PA */
+		for (i = 0; i < ARRAY_SIZE(mt76x0_rf_ext_pa_tab); i++)
+			if (mt76x0_rf_ext_pa_tab[i].bw_band & rf_band)
+				rf_wr(dev, mt76x0_rf_ext_pa_tab[i].rf_bank_reg,
+					   mt76x0_rf_ext_pa_tab[i].value);
+	}
+
+	if (rf_band & RF_G_BAND) {
+		mt76_wr(dev, MT_TX0_RF_GAIN_ATTEN, 0x63707400);
+		/* Set Atten mode = 2 For G band, Disable Tx Inc dcoc. */
+		mac_reg = mt76_rr(dev, MT_TX_ALC_CFG_1);
+		mac_reg &= 0x896400FF;
+		mt76_wr(dev, MT_TX_ALC_CFG_1, mac_reg);
+	} else {
+		mt76_wr(dev, MT_TX0_RF_GAIN_ATTEN, 0x686A7800);
+		/* Set Atten mode = 0 For Ext A band, Disable Tx Inc dcoc Cal. */
+		mac_reg = mt76_rr(dev, MT_TX_ALC_CFG_1);
+		mac_reg &= 0x890400FF;
+		mt76_wr(dev, MT_TX_ALC_CFG_1, mac_reg);
+	}
+}
+
+static void
+mt76x0_phy_set_chan_bbp_params(struct mt76x0_dev *dev, u8 channel, u16 rf_bw_band)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mt76x0_bbp_switch_tab); i++) {
+		const struct mt76x0_bbp_switch_item *item = &mt76x0_bbp_switch_tab[i];
+		const struct mt76_reg_pair *pair = &item->reg_pair;
+
+		if ((rf_bw_band & item->bw_band) != rf_bw_band)
+			continue;
+
+		if (pair->reg == MT_BBP(AGC, 8)) {
+			u32 val = pair->value;
+			u8 gain = FIELD_GET(MT_BBP_AGC_GAIN, val);
+
+			if (channel > 14) {
+				if (channel < 100)
+					gain -= dev->ee->lna_gain_5ghz[0]*2;
+				else if (channel < 137)
+					gain -= dev->ee->lna_gain_5ghz[1]*2;
+				else
+					gain -= dev->ee->lna_gain_5ghz[2]*2;
+
+			} else {
+				gain -= dev->ee->lna_gain_2ghz*2;
+			}
+
+			val &= ~MT_BBP_AGC_GAIN;
+			val |= FIELD_PREP(MT_BBP_AGC_GAIN, gain);
+			mt76_wr(dev, pair->reg, val);
+		} else {
+			mt76_wr(dev, pair->reg, pair->value);
+		}
+	}
+}
+
+#if 0
+static void
+mt76x0_extra_power_over_mac(struct mt76x0_dev *dev)
+{
+	u32 val;
+
+	val = ((mt76_rr(dev, MT_TX_PWR_CFG_1) & 0x00003f00) >> 8);
+	val |= ((mt76_rr(dev, MT_TX_PWR_CFG_2) & 0x00003f00) << 8);
+	mt76_wr(dev, MT_TX_PWR_CFG_7, val);
+
+	/* TODO: fix VHT */
+	val = ((mt76_rr(dev, MT_TX_PWR_CFG_3) & 0x0000ff00) >> 8);
+	mt76_wr(dev, MT_TX_PWR_CFG_8, val);
+
+	val = ((mt76_rr(dev, MT_TX_PWR_CFG_4) & 0x0000ff00) >> 8);
+	mt76_wr(dev, MT_TX_PWR_CFG_9, val);
+}
+
+static void
+mt76x0_phy_set_tx_power(struct mt76x0_dev *dev, u8 channel, u8 rf_bw_band)
+{
+	u32 val;
+	int i;
+	int bw = (rf_bw_band & RF_BW_20) ? 0 : 1;
+
+	for (i = 0; i < 4; i++) {
+		if (channel <= 14)
+			val = dev->ee->tx_pwr_cfg_2g[i][bw];
+		else
+			val = dev->ee->tx_pwr_cfg_5g[i][bw];
+
+		mt76_wr(dev, MT_TX_PWR_CFG_0 + 4*i, val);
+	}
+
+	mt76x0_extra_power_over_mac(dev);
+}
+#endif
+
+static void
+mt76x0_bbp_set_bw(struct mt76x0_dev *dev, enum nl80211_chan_width width)
+{
+	enum { BW_20 = 0, BW_40 = 1, BW_80 = 2, BW_10 = 4};
+	int bw;
+
+	switch (width) {
+	default:
+	case NL80211_CHAN_WIDTH_20_NOHT:
+	case NL80211_CHAN_WIDTH_20:
+		bw = BW_20;
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		bw = BW_40;
+		break;
+	case NL80211_CHAN_WIDTH_80:
+		bw = BW_80;
+		break;
+	case NL80211_CHAN_WIDTH_10:
+		bw = BW_10;
+		break;
+	case NL80211_CHAN_WIDTH_80P80:
+	case NL80211_CHAN_WIDTH_160:
+	case NL80211_CHAN_WIDTH_5:
+		/* TODO error */
+		return ;
+	}
+
+	mt76x0_mcu_function_select(dev, BW_SETTING, bw);
+}
+
+static void
+mt76x0_phy_set_chan_pwr(struct mt76x0_dev *dev, u8 channel)
+{
+	static const int mt76x0_tx_pwr_ch_list[] = {
+		1,2,3,4,5,6,7,8,9,10,11,12,13,14,
+		36,38,40,44,46,48,52,54,56,60,62,64,
+		100,102,104,108,110,112,116,118,120,124,126,128,132,134,136,140,
+		149,151,153,157,159,161,165,167,169,171,173,
+		42,58,106,122,155
+	};
+	int i;
+	u32 val;
+
+	for (i = 0; i < ARRAY_SIZE(mt76x0_tx_pwr_ch_list); i++)
+		if (mt76x0_tx_pwr_ch_list[i] == channel)
+			break;
+
+	if (WARN_ON(i == ARRAY_SIZE(mt76x0_tx_pwr_ch_list)))
+		return;
+
+	val = mt76_rr(dev, MT_TX_ALC_CFG_0);
+	val &= ~0x3f3f;
+	val |= dev->ee->tx_pwr_per_chan[i];
+	val |= 0x2f2f << 16;
+	mt76_wr(dev, MT_TX_ALC_CFG_0, val);
+}
+
+static int
+__mt76x0_phy_set_channel(struct mt76x0_dev *dev,
+		       struct cfg80211_chan_def *chandef)
+{
+	u32 ext_cca_chan[4] = {
+		[0] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 0) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 1) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(0)),
+		[1] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 1) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 0) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(1)),
+		[2] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 2) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 3) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(2)),
+		[3] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 3) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 2) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
+		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(3)),
+	};
+	bool scan = test_bit(MT76_SCANNING, &dev->mt76.state);
+	int ch_group_index, freq, freq1;
+	u8 channel;
+	u32 val;
+	u16 rf_bw_band;
+
+	freq = chandef->chan->center_freq;
+	freq1 = chandef->center_freq1;
+	channel = chandef->chan->hw_value;
+	rf_bw_band = (channel <= 14) ? RF_G_BAND : RF_A_BAND;
+
+	switch (chandef->width) {
+	case NL80211_CHAN_WIDTH_40:
+		if (freq1 > freq)
+			ch_group_index = 0;
+		else
+			ch_group_index = 1;
+		channel += 2 - ch_group_index * 4;
+		rf_bw_band |= RF_BW_40;
+		break;
+	case NL80211_CHAN_WIDTH_80:
+		ch_group_index = (freq - freq1 + 30) / 20;
+		if (WARN_ON(ch_group_index < 0 || ch_group_index > 3))
+			ch_group_index = 0;
+		channel += 6 - ch_group_index * 4;
+		rf_bw_band |= RF_BW_80;
+		break;
+	default:
+		ch_group_index = 0;
+		rf_bw_band |= RF_BW_20;
+		break;
+	}
+
+	mt76x0_bbp_set_bw(dev, chandef->width);
+	mt76x0_bbp_set_ctrlch(dev, chandef->width, ch_group_index);
+	mt76x0_mac_set_ctrlch(dev, ch_group_index & 1);
+
+	mt76_rmw(dev, MT_EXT_CCA_CFG,
+		 (MT_EXT_CCA_CFG_CCA0 |
+		  MT_EXT_CCA_CFG_CCA1 |
+		  MT_EXT_CCA_CFG_CCA2 |
+		  MT_EXT_CCA_CFG_CCA3 |
+		  MT_EXT_CCA_CFG_CCA_MASK),
+		 ext_cca_chan[ch_group_index]);
+
+	mt76x0_phy_set_band(dev, chandef->chan->band);
+	mt76x0_phy_set_chan_rf_params(dev, channel, rf_bw_band);
+
+	/* set Japan Tx filter at channel 14 */
+	val = mt76_rr(dev, MT_BBP(CORE, 1));
+	if (channel == 14)
+		val |= 0x20;
+	else
+		val &= ~0x20;
+	mt76_wr(dev, MT_BBP(CORE, 1), val);
+
+	mt76x0_phy_set_chan_bbp_params(dev, channel, rf_bw_band);
+
+	/* Vendor driver don't do it */
+	/* mt76x0_phy_set_tx_power(dev, channel, rf_bw_band); */
+
+	if (scan)
+		mt76x0_vco_cal(dev, channel);
+
+	mt76x0_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1);
+	mt76x0_phy_set_chan_pwr(dev, channel);
+
+	dev->mt76.chandef = *chandef;
+	return 0;
+}
+
+int mt76x0_phy_set_channel(struct mt76x0_dev *dev,
+			   struct cfg80211_chan_def *chandef)
+{
+	int ret;
+
+	mutex_lock(&dev->hw_atomic_mutex);
+	ret = __mt76x0_phy_set_channel(dev, chandef);
+	mutex_unlock(&dev->hw_atomic_mutex);
+
+	return ret;
+}
+
+void mt76x0_phy_recalibrate_after_assoc(struct mt76x0_dev *dev)
+{
+	u32 tx_alc, reg_val;
+	u8 channel = dev->mt76.chandef.chan->hw_value;
+	int is_5ghz = (dev->mt76.chandef.chan->band == NL80211_BAND_5GHZ) ? 1 : 0;
+
+	mt76x0_mcu_calibrate(dev, MCU_CAL_R, 0);
+
+	mt76x0_vco_cal(dev, channel);
+
+	tx_alc = mt76_rr(dev, MT_TX_ALC_CFG_0);
+	mt76_wr(dev, MT_TX_ALC_CFG_0, 0);
+	usleep_range(500, 700);
+
+	reg_val = mt76_rr(dev, 0x2124);
+	reg_val &= 0xffffff7e;
+	mt76_wr(dev, 0x2124, reg_val);
+
+	mt76x0_mcu_calibrate(dev, MCU_CAL_RXDCOC, 0);
+
+	mt76x0_mcu_calibrate(dev, MCU_CAL_LC, is_5ghz);
+	mt76x0_mcu_calibrate(dev, MCU_CAL_LOFT, is_5ghz);
+	mt76x0_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz);
+	mt76x0_mcu_calibrate(dev, MCU_CAL_TX_GROUP_DELAY, is_5ghz);
+	mt76x0_mcu_calibrate(dev, MCU_CAL_RXIQ, is_5ghz);
+	mt76x0_mcu_calibrate(dev, MCU_CAL_RX_GROUP_DELAY, is_5ghz);
+
+	mt76_wr(dev, 0x2124, reg_val);
+	mt76_wr(dev, MT_TX_ALC_CFG_0, tx_alc);
+	msleep(100);
+
+	mt76x0_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1);
+}
+
+void mt76x0_agc_save(struct mt76x0_dev *dev)
+{
+	/* Only one RX path */
+	dev->agc_save = FIELD_GET(MT_BBP_AGC_GAIN, mt76_rr(dev, MT_BBP(AGC, 8)));
+}
+
+void mt76x0_agc_restore(struct mt76x0_dev *dev)
+{
+	mt76_rmw_field(dev, MT_BBP(AGC, 8), MT_BBP_AGC_GAIN, dev->agc_save);
+}
+
+static void mt76x0_temp_sensor(struct mt76x0_dev *dev)
+{
+	u8 rf_b7_73, rf_b0_66, rf_b0_67;
+	int cycle, temp;
+	u32 val;
+	s32 sval;
+
+	rf_b7_73 = rf_rr(dev, MT_RF(7, 73));
+	rf_b0_66 = rf_rr(dev, MT_RF(0, 66));
+	rf_b0_67 = rf_rr(dev, MT_RF(0, 73));
+
+	rf_wr(dev, MT_RF(7, 73), 0x02);
+	rf_wr(dev, MT_RF(0, 66), 0x23);
+	rf_wr(dev, MT_RF(0, 73), 0x01);
+
+	mt76_wr(dev, MT_BBP(CORE, 34), 0x00080055);
+
+	for (cycle = 0; cycle < 2000; cycle++) {
+		val = mt76_rr(dev, MT_BBP(CORE, 34));
+		if (!(val & 0x10))
+			break;
+		udelay(3);
+	}
+
+	if (cycle >= 2000) {
+		val &= 0x10;
+		mt76_wr(dev, MT_BBP(CORE, 34), val);
+		goto done;
+	}
+
+	sval = mt76_rr(dev, MT_BBP(CORE, 35)) & 0xff;
+	if (!(sval & 0x80))
+		sval &= 0x7f; /* Positive */
+	else
+		sval |= 0xffffff00; /* Negative */
+
+	temp = (35 * (sval - dev->ee->temp_off))/ 10 + 25;
+
+done:
+	rf_wr(dev, MT_RF(7, 73), rf_b7_73);
+	rf_wr(dev, MT_RF(0, 66), rf_b0_66);
+	rf_wr(dev, MT_RF(0, 73), rf_b0_67);
+}
+
+static void mt76x0_dynamic_vga_tuning(struct mt76x0_dev *dev)
+{
+	u32 val, init_vga;
+
+	init_vga = (dev->mt76.chandef.chan->band == NL80211_BAND_5GHZ) ? 0x54 : 0x4E;
+	if (dev->avg_rssi > -60)
+		init_vga -= 0x20;
+	else if (dev->avg_rssi > -70)
+		init_vga -= 0x10;
+
+	val = mt76_rr(dev, MT_BBP(AGC, 8));
+	val &= 0xFFFF80FF;
+	val |= init_vga << 8;
+	mt76_wr(dev, MT_BBP(AGC,8), val);
+}
+
+static void mt76x0_phy_calibrate(struct work_struct *work)
+{
+	struct mt76x0_dev *dev = container_of(work, struct mt76x0_dev,
+					    cal_work.work);
+
+	mt76x0_dynamic_vga_tuning(dev);
+	mt76x0_temp_sensor(dev);
+
+	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
+				     MT_CALIBRATE_INTERVAL);
+}
+
+void mt76x0_phy_con_cal_onoff(struct mt76x0_dev *dev,
+			       struct ieee80211_bss_conf *info)
+{
+	/* Start/stop collecting beacon data */
+	spin_lock_bh(&dev->con_mon_lock);
+	ether_addr_copy(dev->ap_bssid, info->bssid);
+	dev->avg_rssi = 0;
+	dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
+	spin_unlock_bh(&dev->con_mon_lock);
+}
+
+static void
+mt76x0_set_rx_chains(struct mt76x0_dev *dev)
+{
+	u32 val;
+
+	val = mt76_rr(dev, MT_BBP(AGC, 0));
+	val &= ~(BIT(3) | BIT(4));
+
+	if (dev->chainmask & BIT(1))
+		val |= BIT(3);
+
+	mt76_wr(dev, MT_BBP(AGC, 0), val);
+
+	mb();
+	val = mt76_rr(dev, MT_BBP(AGC, 0));
+}
+
+static void
+mt76x0_set_tx_dac(struct mt76x0_dev *dev)
+{
+	if (dev->chainmask & BIT(1))
+		mt76_set(dev, MT_BBP(TXBE, 5), 3);
+	else
+		mt76_clear(dev, MT_BBP(TXBE, 5), 3);
+}
+
+static void
+mt76x0_rf_init(struct mt76x0_dev *dev)
+{
+	int i;
+	u8 val;
+
+	RF_RANDOM_WRITE(dev, mt76x0_rf_central_tab);
+	RF_RANDOM_WRITE(dev, mt76x0_rf_2g_channel_0_tab);
+	RF_RANDOM_WRITE(dev, mt76x0_rf_5g_channel_0_tab);
+	RF_RANDOM_WRITE(dev, mt76x0_rf_vga_channel_0_tab);
+
+	for (i = 0; i < ARRAY_SIZE(mt76x0_rf_bw_switch_tab); i++) {
+		const struct mt76x0_rf_switch_item *item = &mt76x0_rf_bw_switch_tab[i];
+
+		if (item->bw_band == RF_BW_20)
+			rf_wr(dev, item->rf_bank_reg, item->value);
+		else if (((RF_G_BAND | RF_BW_20) & item->bw_band) == (RF_G_BAND | RF_BW_20))
+			rf_wr(dev, item->rf_bank_reg, item->value);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(mt76x0_rf_band_switch_tab); i++) {
+		if (mt76x0_rf_band_switch_tab[i].bw_band & RF_G_BAND) {
+			rf_wr(dev,
+			      mt76x0_rf_band_switch_tab[i].rf_bank_reg,
+			      mt76x0_rf_band_switch_tab[i].value);
+		}
+	}
+
+	/*
+	   Frequency calibration
+	   E1: B0.R22<6:0>: xo_cxo<6:0>
+	   E2: B0.R21<0>: xo_cxo<0>, B0.R22<7:0>: xo_cxo<8:1>
+	 */
+	rf_wr(dev, MT_RF(0, 22), min_t(u8, dev->ee->rf_freq_off, 0xBF));
+	val = rf_rr(dev, MT_RF(0, 22));
+
+	/*
+	   Reset the DAC (Set B0.R73<7>=1, then set B0.R73<7>=0, and then set B0.R73<7>) during power up.
+	 */
+	val = rf_rr(dev, MT_RF(0, 73));
+	val |= 0x80;
+	rf_wr(dev, MT_RF(0, 73), val);
+	val &= ~0x80;
+	rf_wr(dev, MT_RF(0, 73), val);
+	val |= 0x80;
+	rf_wr(dev, MT_RF(0, 73), val);
+
+	/*
+	   vcocal_en (initiate VCO calibration (reset after completion)) - It should be at the end of RF configuration.
+	 */
+	rf_set(dev, MT_RF(0, 4), 0x80);
+}
+
+void mt76x0_ant_select(struct mt76x0_dev *dev)
+{
+	/* Single antenna mode. */
+	mt76_rmw(dev, MT_WLAN_FUN_CTRL, BIT(5), BIT(6));
+	mt76_clear(dev, MT_CMB_CTRL, BIT(14) | BIT(12));
+	mt76_clear(dev, MT_COEXCFG0, BIT(2));
+	mt76_rmw(dev, MT_COEXCFG3, BIT(5) | BIT(4) | BIT(3) | BIT(2), BIT(1));
+}
+
+void mt76x0_phy_init(struct mt76x0_dev *dev)
+{
+	INIT_DELAYED_WORK(&dev->cal_work, mt76x0_phy_calibrate);
+
+	mt76x0_ant_select(dev);
+
+	mt76x0_rf_init(dev);
+
+	mt76x0_set_rx_chains(dev);
+	mt76x0_set_tx_dac(dev);
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.h b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.h
new file mode 100644
index 000000000000..2880a43c3cb0
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.h
@@ -0,0 +1,81 @@
+/*
+ * (c) Copyright 2002-2010, Ralink Technology, Inc.
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MT76X0_PHY_H_
+#define _MT76X0_PHY_H_
+
+#define RF_G_BAND 	0x0100
+#define RF_A_BAND 	0x0200
+#define RF_A_BAND_LB	0x0400
+#define RF_A_BAND_MB	0x0800
+#define RF_A_BAND_HB	0x1000
+#define RF_A_BAND_11J	0x2000
+
+#define RF_BW_20        1
+#define RF_BW_40        2
+#define RF_BW_10        4
+#define RF_BW_80        8
+
+#define MT_RF(bank, reg) ((bank) << 16 | (reg))
+#define MT_RF_BANK(offset) (offset >> 16)
+#define MT_RF_REG(offset) (offset & 0xff)
+
+struct mt76x0_bbp_switch_item {
+	u16 bw_band;
+	struct mt76_reg_pair reg_pair;
+};
+
+struct mt76x0_rf_switch_item {
+	u32 rf_bank_reg;
+	u16 bw_band;
+	u8 value;
+};
+
+struct mt76x0_freq_item {
+	u8 channel;
+	u32 band;
+	u8 pllR37;
+	u8 pllR36;
+	u8 pllR35;
+	u8 pllR34;
+	u8 pllR33;
+	u8 pllR32_b7b5;
+	u8 pllR32_b4b0; /* PLL_DEN (Denomina - 8) */
+	u8 pllR31_b7b5;
+	u8 pllR31_b4b0; /* PLL_K (Nominator *)*/
+	u8 pllR30_b7;	/* sdm_reset_n */
+	u8 pllR30_b6b2; /* sdmmash_prbs,sin */
+	u8 pllR30_b1;	/* sdm_bp */
+	u16 pll_n;	/* R30<0>, R29<7:0> (hex) */
+	u8 pllR28_b7b6; /* isi,iso */
+	u8 pllR28_b5b4;	/* pfd_dly */
+	u8 pllR28_b3b2;	/* clksel option */
+	u32 pll_sdm_k;	/* R28<1:0>, R27<7:0>, R26<7:0> (hex) SDM_k */
+	u8 pllR24_b1b0;	/* xo_div */
+};
+
+struct mt76x0_rate_pwr_item {
+	s8 mcs_power;
+	u8 rf_pa_mode;
+};
+
+struct mt76x0_rate_pwr_tab {
+	struct mt76x0_rate_pwr_item cck[4];
+	struct mt76x0_rate_pwr_item ofdm[8];
+	struct mt76x0_rate_pwr_item ht[8];
+	struct mt76x0_rate_pwr_item vht[10];
+	struct mt76x0_rate_pwr_item stbc[8];
+	struct mt76x0_rate_pwr_item mcs32;
+};
+
+#endif /* _MT76X0_PHY_H_ */
-- 
1.9.3

[PATCH v2 07/12] mt76x0: init files

[Stanislaw Gruszka]

Add init files of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/init.c   | 720 +++++++++++++++++++++
 .../net/wireless/mediatek/mt76/mt76x0/initvals.h   | 282 ++++++++
 2 files changed, 1002 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/init.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/init.c b/drivers/net/wireless/mediatek/mt76/mt76x0/init.c
new file mode 100644
index 000000000000..b65b76d80906
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/init.c
@@ -0,0 +1,720 @@
+/*
+ * (c) Copyright 2002-2010, Ralink Technology, Inc.
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt76x0.h"
+#include "eeprom.h"
+#include "trace.h"
+#include "mcu.h"
+#include "usb.h"
+
+#include "initvals.h"
+
+static void
+mt76x0_set_wlan_state(struct mt76x0_dev *dev, u32 val, bool enable)
+{
+	int i;
+
+	/* Note: we don't turn off WLAN_CLK because that makes the device
+	 *	 not respond properly on the probe path.
+	 *	 In case anyone (PSM?) wants to use this function we can
+	 *	 bring the clock stuff back and fixup the probe path.
+	 */
+
+	if (enable)
+		val |= (MT_WLAN_FUN_CTRL_WLAN_EN |
+			MT_WLAN_FUN_CTRL_WLAN_CLK_EN);
+	else
+		val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN);
+
+	mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
+	udelay(20);
+
+	if (!enable)
+		return;
+
+	for (i = 200; i; i--) {
+		val = mt76_rr(dev, MT_CMB_CTRL);
+
+		if (val & MT_CMB_CTRL_XTAL_RDY && val & MT_CMB_CTRL_PLL_LD)
+			break;
+
+		udelay(20);
+	}
+
+	/* Note: vendor driver tries to disable/enable wlan here and retry
+	 *       but the code which does it is so buggy it must have never
+	 *       triggered, so don't bother.
+	 */
+	if (!i)
+		dev_err(dev->mt76.dev, "Error: PLL and XTAL check failed!\n");
+}
+
+static void mt76x0_chip_onoff(struct mt76x0_dev *dev, bool enable, bool reset)
+{
+	u32 val;
+
+	mutex_lock(&dev->hw_atomic_mutex);
+
+	val = mt76_rr(dev, MT_WLAN_FUN_CTRL);
+
+	if (reset) {
+		val |= MT_WLAN_FUN_CTRL_GPIO_OUT_EN;
+		val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL;
+
+		if (val & MT_WLAN_FUN_CTRL_WLAN_EN) {
+			val |= (MT_WLAN_FUN_CTRL_WLAN_RESET |
+				MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
+			mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
+			udelay(20);
+
+			val &= ~(MT_WLAN_FUN_CTRL_WLAN_RESET |
+				 MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
+		}
+	}
+
+	mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
+	udelay(20);
+
+	mt76x0_set_wlan_state(dev, val, enable);
+
+	mutex_unlock(&dev->hw_atomic_mutex);
+}
+
+static void mt76x0_reset_csr_bbp(struct mt76x0_dev *dev)
+{
+	u32 val;
+
+	val = mt76_rr(dev, MT_PBF_SYS_CTRL);
+	val &= ~0x2000;
+	mt76_wr(dev, MT_PBF_SYS_CTRL, val);
+
+	mt76_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_RESET_CSR |
+					 MT_MAC_SYS_CTRL_RESET_BBP);
+
+	msleep(200);
+}
+
+static void mt76x0_init_usb_dma(struct mt76x0_dev *dev)
+{
+	u32 val;
+
+	val = mt76_rr(dev, MT_USB_DMA_CFG);
+
+	val |= FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_TOUT, MT_USB_AGGR_TIMEOUT) |
+	       FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_LMT, MT_USB_AGGR_SIZE_LIMIT) |
+	       MT_USB_DMA_CFG_RX_BULK_EN |
+	       MT_USB_DMA_CFG_TX_BULK_EN;
+	if (dev->in_max_packet == 512)
+		val |= MT_USB_DMA_CFG_RX_BULK_AGG_EN;
+	mt76_wr(dev, MT_USB_DMA_CFG, val);
+
+	val = mt76_rr(dev, MT_COM_REG0);
+	if (val & 1)
+		dev_dbg(dev->mt76.dev, "MCU not ready\n");
+
+	val = mt76_rr(dev, MT_USB_DMA_CFG);
+
+	val |= MT_USB_DMA_CFG_RX_DROP_OR_PADDING;
+	mt76_wr(dev, MT_USB_DMA_CFG, val);
+	val &= ~MT_USB_DMA_CFG_RX_DROP_OR_PADDING;
+	mt76_wr(dev, MT_USB_DMA_CFG, val);
+}
+
+#define RANDOM_WRITE(dev, tab) \
+	mt76x0_write_reg_pairs(dev, MT_MCU_MEMMAP_WLAN, tab, ARRAY_SIZE(tab));
+
+static int mt76x0_init_bbp(struct mt76x0_dev *dev)
+{
+	int ret, i;
+
+	ret = mt76x0_wait_bbp_ready(dev);
+	if (ret)
+		return ret;
+
+	RANDOM_WRITE(dev, mt76x0_bbp_init_tab);
+
+	for (i = 0; i < ARRAY_SIZE(mt76x0_bbp_switch_tab); i++) {
+		const struct mt76x0_bbp_switch_item *item = &mt76x0_bbp_switch_tab[i];
+		const struct mt76_reg_pair *pair = &item->reg_pair;
+
+		if (((RF_G_BAND | RF_BW_20) & item->bw_band) == (RF_G_BAND | RF_BW_20))
+			mt76_wr(dev, pair->reg, pair->value);
+	}
+
+	RANDOM_WRITE(dev, mt76x0_dcoc_tab);
+
+	return 0;
+}
+
+static void
+mt76_init_beacon_offsets(struct mt76x0_dev *dev)
+{
+	u16 base = MT_BEACON_BASE;
+	u32 regs[4] = {};
+	int i;
+
+	for (i = 0; i < 16; i++) {
+		u16 addr = dev->beacon_offsets[i];
+
+		regs[i / 4] |= ((addr - base) / 64) << (8 * (i % 4));
+	}
+
+	for (i = 0; i < 4; i++)
+		mt76_wr(dev, MT_BCN_OFFSET(i), regs[i]);
+}
+
+static void mt76x0_init_mac_registers(struct mt76x0_dev *dev)
+{
+	u32 reg;
+
+	RANDOM_WRITE(dev, common_mac_reg_table);
+
+	mt76_init_beacon_offsets(dev);
+
+	/* Enable PBF and MAC clock SYS_CTRL[11:10] = 0x3 */
+	RANDOM_WRITE(dev, mt76x0_mac_reg_table);
+
+	/* Release BBP and MAC reset MAC_SYS_CTRL[1:0] = 0x0 */
+	reg = mt76_rr(dev, MT_MAC_SYS_CTRL);
+	reg &= ~0x3;
+	mt76_wr(dev, MT_MAC_SYS_CTRL, reg);
+
+	if (is_mt7610e(dev)) {
+		/* Disable COEX_EN */
+		reg = mt76_rr(dev, MT_COEXCFG0);
+		reg &= 0xFFFFFFFE;
+		mt76_wr(dev, MT_COEXCFG0, reg);
+	}
+
+	/* Set 0x141C[15:12]=0xF */
+	reg = mt76_rr(dev, MT_EXT_CCA_CFG);
+	reg |= 0x0000F000;
+	mt76_wr(dev, MT_EXT_CCA_CFG, reg);
+
+	mt76_clear(dev, MT_FCE_L2_STUFF, MT_FCE_L2_STUFF_WR_MPDU_LEN_EN);
+
+	/*
+		TxRing 9 is for Mgmt frame.
+		TxRing 8 is for In-band command frame.
+		WMM_RG0_TXQMA: This register setting is for FCE to define the rule of TxRing 9.
+		WMM_RG1_TXQMA: This register setting is for FCE to define the rule of TxRing 8.
+	*/
+	reg = mt76_rr(dev, MT_WMM_CTRL);
+	reg &= ~0x000003FF;
+	reg |= 0x00000201;
+	mt76_wr(dev, MT_WMM_CTRL, reg);
+
+	/* TODO: Probably not needed */
+	mt76_wr(dev, 0x7028, 0);
+	mt76_wr(dev, 0x7010, 0);
+	mt76_wr(dev, 0x7024, 0);
+	msleep(10);
+}
+
+static int mt76x0_init_wcid_mem(struct mt76x0_dev *dev)
+{
+	u32 *vals;
+	int i, ret;
+
+	vals = kmalloc(sizeof(*vals) * N_WCIDS * 2, GFP_KERNEL);
+	if (!vals)
+		return -ENOMEM;
+
+	for (i = 0; i < N_WCIDS; i++)  {
+		vals[i * 2] = 0xffffffff;
+		vals[i * 2 + 1] = 0x00ffffff;
+	}
+
+	ret = mt76x0_burst_write_regs(dev, MT_WCID_ADDR_BASE,
+				      vals, N_WCIDS * 2);
+	kfree(vals);
+
+	return ret;
+}
+
+static int mt76x0_init_key_mem(struct mt76x0_dev *dev)
+{
+	u32 vals[4] = {};
+
+	return mt76x0_burst_write_regs(dev, MT_SKEY_MODE_BASE_0,
+					vals, ARRAY_SIZE(vals));
+}
+
+static int mt76x0_init_wcid_attr_mem(struct mt76x0_dev *dev)
+{
+	u32 *vals;
+	int i, ret;
+
+	vals = kmalloc(sizeof(*vals) * N_WCIDS * 2, GFP_KERNEL);
+	if (!vals)
+		return -ENOMEM;
+
+	for (i = 0; i < N_WCIDS * 2; i++)
+		vals[i] = 1;
+
+	ret = mt76x0_burst_write_regs(dev, MT_WCID_ATTR_BASE,
+				      vals, N_WCIDS * 2);
+	kfree(vals);
+
+	return ret;
+}
+
+static void mt76x0_reset_counters(struct mt76x0_dev *dev)
+{
+	mt76_rr(dev, MT_RX_STA_CNT0);
+	mt76_rr(dev, MT_RX_STA_CNT1);
+	mt76_rr(dev, MT_RX_STA_CNT2);
+	mt76_rr(dev, MT_TX_STA_CNT0);
+	mt76_rr(dev, MT_TX_STA_CNT1);
+	mt76_rr(dev, MT_TX_STA_CNT2);
+}
+
+int mt76x0_mac_start(struct mt76x0_dev *dev)
+{
+	mt76_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_TX);
+
+	if (!mt76_poll(dev, MT_WPDMA_GLO_CFG, MT_WPDMA_GLO_CFG_TX_DMA_BUSY |
+		       MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 200000))
+		return -ETIMEDOUT;
+
+	dev->rxfilter = MT_RX_FILTR_CFG_CRC_ERR |
+		MT_RX_FILTR_CFG_PHY_ERR | MT_RX_FILTR_CFG_PROMISC |
+		MT_RX_FILTR_CFG_VER_ERR | MT_RX_FILTR_CFG_DUP |
+		MT_RX_FILTR_CFG_CFACK | MT_RX_FILTR_CFG_CFEND |
+		MT_RX_FILTR_CFG_ACK | MT_RX_FILTR_CFG_CTS |
+		MT_RX_FILTR_CFG_RTS | MT_RX_FILTR_CFG_PSPOLL |
+		MT_RX_FILTR_CFG_BA | MT_RX_FILTR_CFG_CTRL_RSV;
+	mt76_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter);
+
+	mt76_wr(dev, MT_MAC_SYS_CTRL,
+		   MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX);
+
+	if (!mt76_poll(dev, MT_WPDMA_GLO_CFG, MT_WPDMA_GLO_CFG_TX_DMA_BUSY |
+		       MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 50))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void mt76x0_mac_stop_hw(struct mt76x0_dev *dev)
+{
+	int i, ok;
+
+	if (test_bit(MT76_REMOVED, &dev->mt76.state))
+		return;
+
+	mt76_clear(dev, MT_BEACON_TIME_CFG, MT_BEACON_TIME_CFG_TIMER_EN |
+		   MT_BEACON_TIME_CFG_SYNC_MODE | MT_BEACON_TIME_CFG_TBTT_EN |
+		   MT_BEACON_TIME_CFG_BEACON_TX);
+
+	if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000))
+		dev_warn(dev->mt76.dev, "Warning: TX DMA did not stop!\n");
+
+	/* Page count on TxQ */
+	i = 200;
+	while (i-- && ((mt76_rr(dev, 0x0438) & 0xffffffff) ||
+		       (mt76_rr(dev, 0x0a30) & 0x000000ff) ||
+		       (mt76_rr(dev, 0x0a34) & 0x00ff00ff)))
+		msleep(10);
+
+	if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX, 0, 1000))
+		dev_warn(dev->mt76.dev, "Warning: MAC TX did not stop!\n");
+
+	mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX |
+					 MT_MAC_SYS_CTRL_ENABLE_TX);
+
+	/* Page count on RxQ */
+	ok = 0;
+	i = 200;
+	while (i--) {
+		if (!(mt76_rr(dev, MT_RXQ_STA) & 0x00ff0000) &&
+		    !mt76_rr(dev, 0x0a30) &&
+		    !mt76_rr(dev, 0x0a34)) {
+			if (ok++ > 5)
+				break;
+			continue;
+		}
+		msleep(1);
+	}
+
+	if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 1000))
+		dev_warn(dev->mt76.dev, "Warning: MAC RX did not stop!\n");
+
+	if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000))
+		dev_warn(dev->mt76.dev, "Warning: RX DMA did not stop!\n");
+}
+
+void mt76x0_mac_stop(struct mt76x0_dev *dev)
+{
+	mt76x0_mac_stop_hw(dev);
+	flush_delayed_work(&dev->stat_work);
+	cancel_delayed_work_sync(&dev->stat_work);
+}
+
+static void mt76x0_stop_hardware(struct mt76x0_dev *dev)
+{
+	mt76x0_chip_onoff(dev, false, false);
+}
+
+int mt76x0_init_hardware(struct mt76x0_dev *dev)
+{
+	static const u16 beacon_offsets[16] = {
+		/* 512 byte per beacon */
+		0xc000,	0xc200,	0xc400,	0xc600,
+		0xc800,	0xca00,	0xcc00,	0xce00,
+		0xd000,	0xd200,	0xd400,	0xd600,
+		0xd800,	0xda00,	0xdc00,	0xde00
+	};
+	int ret;
+
+	dev->beacon_offsets = beacon_offsets;
+
+	mt76x0_chip_onoff(dev, true, true);
+
+	ret = mt76x0_wait_asic_ready(dev);
+	if (ret)
+		goto err;
+	ret = mt76x0_mcu_init(dev);
+	if (ret)
+		goto err;
+
+	if (!mt76_poll_msec(dev, MT_WPDMA_GLO_CFG,
+			    MT_WPDMA_GLO_CFG_TX_DMA_BUSY |
+			    MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 100)) {
+		ret = -EIO;
+		goto err;
+	}
+
+	/* Wait for ASIC ready after FW load. */
+	ret = mt76x0_wait_asic_ready(dev);
+	if (ret)
+		goto err;
+
+	mt76x0_reset_csr_bbp(dev);
+	mt76x0_init_usb_dma(dev);
+
+	mt76_wr(dev, MT_HEADER_TRANS_CTRL_REG, 0x0);
+	mt76_wr(dev, MT_TSO_CTRL, 0x0);
+
+	ret = mt76x0_mcu_cmd_init(dev);
+	if (ret)
+		goto err;
+	ret = mt76x0_dma_init(dev);
+	if (ret)
+		goto err_mcu;
+
+	mt76x0_init_mac_registers(dev);
+
+	if (!mt76_poll_msec(dev, MT_MAC_STATUS,
+			    MT_MAC_STATUS_TX | MT_MAC_STATUS_RX, 0, 1000)) {
+		ret = -EIO;
+		goto err_rx;
+	}
+
+	ret = mt76x0_init_bbp(dev);
+	if (ret)
+		goto err_rx;
+
+	ret = mt76x0_init_wcid_mem(dev);
+	if (ret)
+		goto err_rx;
+	ret = mt76x0_init_key_mem(dev);
+	if (ret)
+		goto err_rx;
+	ret = mt76x0_init_wcid_attr_mem(dev);
+	if (ret)
+		goto err_rx;
+
+	mt76_clear(dev, MT_BEACON_TIME_CFG, (MT_BEACON_TIME_CFG_TIMER_EN |
+					     MT_BEACON_TIME_CFG_SYNC_MODE |
+					     MT_BEACON_TIME_CFG_TBTT_EN |
+					     MT_BEACON_TIME_CFG_BEACON_TX));
+
+	mt76x0_reset_counters(dev);
+
+	mt76_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e);
+
+	mt76_wr(dev, MT_TXOP_CTRL_CFG,
+		   FIELD_PREP(MT_TXOP_TRUN_EN, 0x3f) |
+		   FIELD_PREP(MT_TXOP_EXT_CCA_DLY, 0x58));
+
+	ret = mt76x0_eeprom_init(dev);
+	if (ret)
+		goto err_rx;
+
+	mt76x0_phy_init(dev);
+	return 0;
+
+err_rx:
+	mt76x0_dma_cleanup(dev);
+err_mcu:
+	mt76x0_mcu_cmd_deinit(dev);
+err:
+	mt76x0_chip_onoff(dev, false, false);
+	return ret;
+}
+
+void mt76x0_cleanup(struct mt76x0_dev *dev)
+{
+	if (!test_and_clear_bit(MT76_STATE_INITIALIZED, &dev->mt76.state))
+		return;
+
+	mt76x0_stop_hardware(dev);
+	mt76x0_dma_cleanup(dev);
+	mt76x0_mcu_cmd_deinit(dev);
+}
+
+struct mt76x0_dev *mt76x0_alloc_device(struct device *pdev)
+{
+	struct ieee80211_hw *hw;
+	struct mt76x0_dev *dev;
+
+	hw = ieee80211_alloc_hw(sizeof(*dev), &mt76x0_ops);
+	if (!hw)
+		return NULL;
+
+	dev = hw->priv;
+	dev->mt76.dev = pdev;
+	dev->mt76.hw = hw;
+	mutex_init(&dev->usb_ctrl_mtx);
+	mutex_init(&dev->reg_atomic_mutex);
+	mutex_init(&dev->hw_atomic_mutex);
+	mutex_init(&dev->mutex);
+	spin_lock_init(&dev->tx_lock);
+	spin_lock_init(&dev->rx_lock);
+	spin_lock_init(&dev->mt76.lock);
+	spin_lock_init(&dev->mac_lock);
+	spin_lock_init(&dev->con_mon_lock);
+	atomic_set(&dev->avg_ampdu_len, 1);
+	skb_queue_head_init(&dev->tx_skb_done);
+
+	dev->stat_wq = alloc_workqueue("mt76x0", WQ_UNBOUND, 0);
+	if (!dev->stat_wq) {
+		ieee80211_free_hw(hw);
+		return NULL;
+	}
+
+	return dev;
+}
+
+#define CHAN2G(_idx, _freq) {			\
+	.band = NL80211_BAND_2GHZ,		\
+	.center_freq = (_freq),			\
+	.hw_value = (_idx),			\
+	.max_power = 30,			\
+}
+
+static const struct ieee80211_channel mt76_channels_2ghz[] = {
+	CHAN2G(1, 2412),
+	CHAN2G(2, 2417),
+	CHAN2G(3, 2422),
+	CHAN2G(4, 2427),
+	CHAN2G(5, 2432),
+	CHAN2G(6, 2437),
+	CHAN2G(7, 2442),
+	CHAN2G(8, 2447),
+	CHAN2G(9, 2452),
+	CHAN2G(10, 2457),
+	CHAN2G(11, 2462),
+	CHAN2G(12, 2467),
+	CHAN2G(13, 2472),
+	CHAN2G(14, 2484),
+};
+
+#define CHAN5G(_idx, _freq) {			\
+	.band = NL80211_BAND_5GHZ,		\
+	.center_freq = (_freq),			\
+	.hw_value = (_idx),			\
+	.max_power = 30,			\
+}
+
+static const struct ieee80211_channel mt76_channels_5ghz[] = {
+	CHAN5G(36, 5180),
+	CHAN5G(40, 5200),
+	CHAN5G(44, 5220),
+	CHAN5G(46, 5230),
+	CHAN5G(48, 5240),
+	CHAN5G(52, 5260),
+	CHAN5G(56, 5280),
+	CHAN5G(60, 5300),
+	CHAN5G(64, 5320),
+
+	CHAN5G(100, 5500),
+	CHAN5G(104, 5520),
+	CHAN5G(108, 5540),
+	CHAN5G(112, 5560),
+	CHAN5G(116, 5580),
+	CHAN5G(120, 5600),
+	CHAN5G(124, 5620),
+	CHAN5G(128, 5640),
+	CHAN5G(132, 5660),
+	CHAN5G(136, 5680),
+	CHAN5G(140, 5700),
+};
+
+#define CCK_RATE(_idx, _rate) {					\
+	.bitrate = _rate,					\
+	.flags = IEEE80211_RATE_SHORT_PREAMBLE,			\
+	.hw_value = (MT_PHY_TYPE_CCK << 8) | _idx,		\
+	.hw_value_short = (MT_PHY_TYPE_CCK << 8) | (8 + _idx),	\
+}
+
+#define OFDM_RATE(_idx, _rate) {				\
+	.bitrate = _rate,					\
+	.hw_value = (MT_PHY_TYPE_OFDM << 8) | _idx,		\
+	.hw_value_short = (MT_PHY_TYPE_OFDM << 8) | _idx,	\
+}
+
+static struct ieee80211_rate mt76_rates[] = {
+	CCK_RATE(0, 10),
+	CCK_RATE(1, 20),
+	CCK_RATE(2, 55),
+	CCK_RATE(3, 110),
+	OFDM_RATE(0, 60),
+	OFDM_RATE(1, 90),
+	OFDM_RATE(2, 120),
+	OFDM_RATE(3, 180),
+	OFDM_RATE(4, 240),
+	OFDM_RATE(5, 360),
+	OFDM_RATE(6, 480),
+	OFDM_RATE(7, 540),
+};
+
+static int
+mt76_init_sband(struct mt76x0_dev *dev, struct ieee80211_supported_band *sband,
+		const struct ieee80211_channel *chan, int n_chan,
+		struct ieee80211_rate *rates, int n_rates)
+{
+	struct ieee80211_sta_ht_cap *ht_cap;
+	void *chanlist;
+	int size;
+
+	size = n_chan * sizeof(*chan);
+	chanlist = devm_kmemdup(dev->mt76.dev, chan, size, GFP_KERNEL);
+	if (!chanlist)
+		return -ENOMEM;
+
+	sband->channels = chanlist;
+	sband->n_channels = n_chan;
+	sband->bitrates = rates;
+	sband->n_bitrates = n_rates;
+
+	ht_cap = &sband->ht_cap;
+	ht_cap->ht_supported = true;
+	ht_cap->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+		      IEEE80211_HT_CAP_GRN_FLD |
+		      IEEE80211_HT_CAP_SGI_20 |
+		      IEEE80211_HT_CAP_SGI_40 |
+		      (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT);
+
+	ht_cap->mcs.rx_mask[0] = 0xff;
+	ht_cap->mcs.rx_mask[4] = 0x1;
+	ht_cap->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+	ht_cap->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+	ht_cap->ampdu_density = IEEE80211_HT_MPDU_DENSITY_2;
+
+	return 0;
+}
+
+static int
+mt76_init_sband_2g(struct mt76x0_dev *dev)
+{
+	dev->mt76.hw->wiphy->bands[NL80211_BAND_2GHZ] = &dev->mt76.sband_2g.sband;
+
+	WARN_ON(dev->ee->reg.start - 1 + dev->ee->reg.num >
+		ARRAY_SIZE(mt76_channels_2ghz));
+
+
+	return mt76_init_sband(dev, &dev->mt76.sband_2g.sband,
+			       mt76_channels_2ghz, ARRAY_SIZE(mt76_channels_2ghz),
+			       mt76_rates, ARRAY_SIZE(mt76_rates));
+}
+
+static int
+mt76_init_sband_5g(struct mt76x0_dev *dev)
+{
+	dev->mt76.hw->wiphy->bands[NL80211_BAND_5GHZ] = &dev->mt76.sband_5g.sband;
+
+	return mt76_init_sband(dev, &dev->mt76.sband_5g.sband,
+			       mt76_channels_5ghz, ARRAY_SIZE(mt76_channels_5ghz),
+			       mt76_rates + 4, ARRAY_SIZE(mt76_rates) - 4);
+}
+
+
+int mt76x0_register_device(struct mt76x0_dev *dev)
+{
+	struct ieee80211_hw *hw = dev->mt76.hw;
+	struct wiphy *wiphy = hw->wiphy;
+	int ret;
+
+	/* Reserve WCID 0 for mcast - thanks to this APs WCID will go to
+	 * entry no. 1 like it does in the vendor driver.
+	 */
+	dev->wcid_mask[0] |= 1;
+
+	/* init fake wcid for monitor interfaces */
+	dev->mon_wcid = devm_kmalloc(dev->mt76.dev, sizeof(*dev->mon_wcid),
+				     GFP_KERNEL);
+	if (!dev->mon_wcid)
+		return -ENOMEM;
+	dev->mon_wcid->idx = 0xff;
+	dev->mon_wcid->hw_key_idx = -1;
+
+	SET_IEEE80211_DEV(hw, dev->mt76.dev);
+
+	hw->queues = 4;
+	ieee80211_hw_set(hw, SIGNAL_DBM);
+	ieee80211_hw_set(hw, PS_NULLFUNC_STACK);
+	ieee80211_hw_set(hw, SUPPORTS_HT_CCK_RATES);
+	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
+	ieee80211_hw_set(hw, SUPPORTS_RC_TABLE);
+	hw->max_rates = 1;
+	hw->max_report_rates = 7;
+	hw->max_rate_tries = 1;
+
+	hw->sta_data_size = sizeof(struct mt76_sta);
+	hw->vif_data_size = sizeof(struct mt76_vif);
+
+	SET_IEEE80211_PERM_ADDR(hw, dev->macaddr);
+
+	wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR;
+	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
+	if (dev->ee->has_2ghz) {
+		ret = mt76_init_sband_2g(dev);
+		if (ret)
+			return ret;
+	}
+
+	if (dev->ee->has_5ghz) {
+		ret = mt76_init_sband_5g(dev);
+		if (ret)
+			return ret;
+	}
+
+	dev->mt76.chandef.chan = &dev->mt76.sband_2g.sband.channels[0];
+
+	INIT_DELAYED_WORK(&dev->mac_work, mt76x0_mac_work);
+	INIT_DELAYED_WORK(&dev->stat_work, mt76x0_tx_stat);
+
+	ret = ieee80211_register_hw(hw);
+	if (ret)
+		return ret;
+
+	mt76x0_init_debugfs(dev);
+
+	return 0;
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h b/drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h
new file mode 100644
index 000000000000..24afcfd94b4e
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h
@@ -0,0 +1,282 @@
+/*
+ * (c) Copyright 2002-2010, Ralink Technology, Inc.
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT76X0U_INITVALS_H
+#define __MT76X0U_INITVALS_H
+
+#include "phy.h"
+
+static const struct mt76_reg_pair common_mac_reg_table[] = {
+#if 1
+	{MT_BCN_OFFSET(0),			0xf8f0e8e0}, /* 0x3800(e0), 0x3A00(e8), 0x3C00(f0), 0x3E00(f8), 512B for each beacon */
+	{MT_BCN_OFFSET(1),			0x6f77d0c8}, /* 0x3200(c8), 0x3400(d0), 0x1DC0(77), 0x1BC0(6f), 512B for each beacon */
+#endif
+
+	{MT_LEGACY_BASIC_RATE,		0x0000013f}, /*  Basic rate set bitmap*/
+	{MT_HT_BASIC_RATE,		0x00008003}, /* Basic HT rate set , 20M, MCS=3, MM. Format is the same as in TXWI.*/
+	{MT_MAC_SYS_CTRL,		0x00}, /* 0x1004, , default Disable RX*/
+	{MT_RX_FILTR_CFG,		0x17f97}, /*0x1400  , RX filter control,  */
+	{MT_BKOFF_SLOT_CFG,	0x209}, /* default set short slot time, CC_DELAY_TIME should be 2	 */
+	/*{TX_SW_CFG0,		0x40a06},  Gary,2006-08-23 */
+	{MT_TX_SW_CFG0,		0x0}, 		/* Gary,2008-05-21 for CWC test */
+	{MT_TX_SW_CFG1,		0x80606}, /* Gary,2006-08-23 */
+	{MT_TX_LINK_CFG,		0x1020},		/* Gary,2006-08-23 */
+	/*{TX_TIMEOUT_CFG,	0x00182090},	 CCK has some problem. So increase timieout value. 2006-10-09 MArvek RT*/
+	{MT_TX_TIMEOUT_CFG,	0x000a2090},	/* CCK has some problem. So increase timieout value. 2006-10-09 MArvek RT , Modify for 2860E ,2007-08-01*/
+	{MT_MAX_LEN_CFG,		0xa0fff | 0x00001000},	/* 0x3018, MAX frame length. Max PSDU = 16kbytes.*/
+	{MT_LED_CFG,		0x7f031e46}, /* Gary, 2006-08-23*/
+
+	{MT_PBF_TX_MAX_PCNT,		0x1fbf1f1f /*0xbfbf3f1f*/},
+	{MT_PBF_RX_MAX_PCNT,		0x9f},
+
+	/*{TX_RTY_CFG,			0x6bb80408},	 Jan, 2006/11/16*/
+/* WMM_ACM_SUPPORT */
+/*	{TX_RTY_CFG,			0x6bb80101},	 sample*/
+	{MT_TX_RETRY_CFG,			0x47d01f0f},	/* Jan, 2006/11/16, Set TxWI->ACK =0 in Probe Rsp Modify for 2860E ,2007-08-03*/
+
+	{MT_AUTO_RSP_CFG,			0x00000013},	/* Initial Auto_Responder, because QA will turn off Auto-Responder*/
+	{MT_CCK_PROT_CFG,			0x05740003 /*0x01740003*/},	/* Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. */
+	{MT_OFDM_PROT_CFG,			0x05740003 /*0x01740003*/},	/* Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. */
+	{MT_PBF_CFG, 				0xf40006}, 		/* Only enable Queue 2*/
+	{MT_MM40_PROT_CFG,			0x3F44084},		/* Initial Auto_Responder, because QA will turn off Auto-Responder*/
+	{MT_WPDMA_GLO_CFG,			0x00000030},
+	{MT_GF20_PROT_CFG,			0x01744004},    /* set 19:18 --> Short NAV for MIMO PS*/
+	{MT_GF40_PROT_CFG,			0x03F44084},
+	{MT_MM20_PROT_CFG,			0x01744004},
+	{MT_TXOP_CTRL_CFG,			0x0000583f, /*0x0000243f*/ /*0x000024bf*/},	/*Extension channel backoff.*/
+	{MT_TX_RTS_CFG,			0x00092b20},
+
+	{MT_EXP_ACK_TIME,			0x002400ca},	/* default value */
+	{MT_TXOP_HLDR_ET, 			0x00000002},
+
+	/* Jerry comments 2008/01/16: we use SIFS = 10us in CCK defaultly, but it seems that 10us
+		is too small for INTEL 2200bg card, so in MBSS mode, the delta time between beacon0
+		and beacon1 is SIFS (10us), so if INTEL 2200bg card connects to BSS0, the ping
+		will always lost. So we change the SIFS of CCK from 10us to 16us. */
+	{MT_XIFS_TIME_CFG,			0x33a41010},
+	{MT_PWR_PIN_CFG,			0x00000000},
+};
+
+static const struct mt76_reg_pair mt76x0_mac_reg_table[] = {
+	/* {MT_IOCFG_6,		0xA0040080 }, */
+	{MT_PBF_SYS_CTRL,	0x00080c00 },
+	{MT_PBF_CFG,		0x77723c1f },
+	{MT_FCE_PSE_CTRL,	0x00000001 },
+
+	{MT_AMPDU_MAX_LEN_20M1S,	0xBAA99887 },
+
+	/* Delay bb_tx_pe for proper tx_mcs_pwr update */
+	{MT_TX_SW_CFG0,		0x00000601 },
+
+	/* Set rf_tx_pe deassert time to 1us by Chee's comment @MT7650_CR_setting_1018.xlsx */
+	{MT_TX_SW_CFG1,		0x00040000 },
+	{MT_TX_SW_CFG2,		0x00000000 },
+
+	/* disable Tx info report */
+	{0xa44,		0x0000000 },
+
+	{MT_HEADER_TRANS_CTRL_REG, 0x0},
+	{MT_TSO_CTRL,		0x0},
+
+	/* BB_PA_MODE_CFG0(0x1214) Keep default value @20120903 */
+	{MT_BB_PA_MODE_CFG1,	0x00500055},
+
+	/* RF_PA_MODE_CFG0(0x121C) Keep default value @20120903 */
+	{MT_RF_PA_MODE_CFG1,	0x00500055},
+
+	{MT_TX_ALC_CFG_0,	0x2F2F000C},
+	{MT_TX0_BB_GAIN_ATTEN,  0x00000000}, /* set BBP atten gain = 0 */
+
+	{MT_TX_PWR_CFG_0, 0x3A3A3A3A},
+	{MT_TX_PWR_CFG_1, 0x3A3A3A3A},
+	{MT_TX_PWR_CFG_2, 0x3A3A3A3A},
+	{MT_TX_PWR_CFG_3, 0x3A3A3A3A},
+	{MT_TX_PWR_CFG_4, 0x3A3A3A3A},
+	{MT_TX_PWR_CFG_7, 0x3A3A3A3A},
+	{MT_TX_PWR_CFG_8, 0x3A},
+	{MT_TX_PWR_CFG_9, 0x3A},
+	/* Enable Tx length > 4095 byte */
+	{0x150C,		0x00000002},
+
+	/* Disable bt_abort_tx_en(0x1238[21] = 0) which is not used at MT7650 */
+	{0x1238, 		0x001700C8},
+	/* PMU_OCLEVEL<5:1> from default <5'b10010> to <5'b11011> for normal driver */
+	/* {MT_LDO_CTRL_0,		0x00A647B6}, */
+
+	/* Default LDO_DIG supply 1.26V, change to 1.2V */
+	{MT_LDO_CTRL_1,		0x6B006464 },
+/*
+	{MT_HT_BASIC_RATE,	0x00004003 },
+	{MT_HT_CTRL_CFG,	0x000001FF },
+*/
+};
+
+
+static const struct mt76_reg_pair mt76x0_bbp_init_tab[] = {
+	{MT_BBP(CORE, 1), 0x00000002},
+	{MT_BBP(CORE, 4), 0x00000000},
+	{MT_BBP(CORE, 24), 0x00000000},
+	{MT_BBP(CORE, 32), 0x4003000a},
+	{MT_BBP(CORE, 42), 0x00000000},
+	{MT_BBP(CORE, 44), 0x00000000},
+
+	{MT_BBP(IBI, 11), 0x00000080},
+
+	/*
+		0x2300[5] Default Antenna:
+		0 for WIFI main antenna
+		1 for WIFI aux  antenna
+
+	*/
+	{MT_BBP(AGC, 0), 0x00021400},
+	{MT_BBP(AGC, 1), 0x00000003},
+	{MT_BBP(AGC, 2), 0x003A6464},
+	{MT_BBP(AGC, 15), 0x88A28CB8},
+	{MT_BBP(AGC, 22), 0x00001E21},
+	{MT_BBP(AGC, 23), 0x0000272C},
+	{MT_BBP(AGC, 24), 0x00002F3A},
+	{MT_BBP(AGC, 25), 0x8000005A},
+	{MT_BBP(AGC, 26), 0x007C2005},
+	{MT_BBP(AGC, 34), 0x000A0C0C},
+	{MT_BBP(AGC, 37), 0x2121262C},
+	{MT_BBP(AGC, 41), 0x38383E45},
+	{MT_BBP(AGC, 57), 0x00001010},
+	{MT_BBP(AGC, 59), 0xBAA20E96},
+	{MT_BBP(AGC, 63), 0x00000001},
+
+	{MT_BBP(TXC, 0), 0x00280403},
+	{MT_BBP(TXC, 1), 0x00000000},
+
+	{MT_BBP(RXC, 1), 0x00000012},
+	{MT_BBP(RXC, 2), 0x00000011},
+	{MT_BBP(RXC, 3), 0x00000005},
+	{MT_BBP(RXC, 4), 0x00000000},
+	{MT_BBP(RXC, 5), 0xF977C4EC},
+	{MT_BBP(RXC, 7), 0x00000090},
+
+	{MT_BBP(TXO, 8), 0x00000000},
+
+	{MT_BBP(TXBE, 0), 0x00000000},
+	{MT_BBP(TXBE, 4), 0x00000004},
+	{MT_BBP(TXBE, 6), 0x00000000},
+	{MT_BBP(TXBE, 8), 0x00000014},
+	{MT_BBP(TXBE, 9), 0x20000000},
+	{MT_BBP(TXBE, 10), 0x00000000},
+	{MT_BBP(TXBE, 12), 0x00000000},
+	{MT_BBP(TXBE, 13), 0x00000000},
+	{MT_BBP(TXBE, 14), 0x00000000},
+	{MT_BBP(TXBE, 15), 0x00000000},
+	{MT_BBP(TXBE, 16), 0x00000000},
+	{MT_BBP(TXBE, 17), 0x00000000},
+
+	{MT_BBP(RXFE, 1), 0x00008800}, /* Add for E3 */
+	{MT_BBP(RXFE, 3), 0x00000000},
+	{MT_BBP(RXFE, 4), 0x00000000},
+
+	{MT_BBP(RXO, 13), 0x00000092},
+	{MT_BBP(RXO, 14), 0x00060612},
+	{MT_BBP(RXO, 15), 0xC8321B18},
+	{MT_BBP(RXO, 16), 0x0000001E},
+	{MT_BBP(RXO, 17), 0x00000000},
+	{MT_BBP(RXO, 18), 0xCC00A993},
+	{MT_BBP(RXO, 19), 0xB9CB9CB9},
+	{MT_BBP(RXO, 20), 0x26c00057},
+	{MT_BBP(RXO, 21), 0x00000001},
+	{MT_BBP(RXO, 24), 0x00000006},
+};
+
+static const struct mt76x0_bbp_switch_item mt76x0_bbp_switch_tab[] = {
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 8), 0x0E344EF0}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 8), 0x122C54F2}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 14), 0x310F2E39}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 14), 0x310F2A3F}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 32), 0x00003230}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 32), 0x0000181C}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 33), 0x00003240}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 33), 0x00003218}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 35), 0x11112016}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 35), 0x11112016}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(RXO, 28), 0x0000008A}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(RXO, 28), 0x0000008A}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 4), 0x1FEDA049}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 4), 0x1FECA054}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 6), 0x00000045}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 6), 0x0000000A}},
+
+	{RF_G_BAND | RF_BW_20,				{MT_BBP(AGC, 12), 0x05052879}},
+	{RF_G_BAND | RF_BW_40,				{MT_BBP(AGC, 12), 0x050528F9}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 12), 0x050528F9}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 13), 0x35050004}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 13), 0x2C3A0406}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 27), 0x000000E1}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 27), 0x000000EC}},
+
+	{RF_G_BAND | RF_BW_20,				{MT_BBP(AGC, 28), 0x00060806}},
+	{RF_G_BAND | RF_BW_40,				{MT_BBP(AGC, 28), 0x00050806}},
+	{RF_A_BAND | RF_BW_40,				{MT_BBP(AGC, 28), 0x00060801}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_80,		{MT_BBP(AGC, 28), 0x00060806}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 31), 0x00000F23}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 31), 0x00000F13}},
+
+	{RF_G_BAND | RF_BW_20,				{MT_BBP(AGC, 39), 0x2A2A3036}},
+	{RF_G_BAND | RF_BW_40,				{MT_BBP(AGC, 39), 0x2A2A2C36}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 39), 0x2A2A3036}},
+	{RF_A_BAND | RF_BW_80,				{MT_BBP(AGC, 39), 0x2A2A2A36}},
+
+	{RF_G_BAND | RF_BW_20,				{MT_BBP(AGC, 43), 0x27273438}},
+	{RF_G_BAND | RF_BW_40,				{MT_BBP(AGC, 43), 0x27272D38}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 43), 0x27272B30}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 51), 0x17171C1C}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 51), 0xFFFFFFFF}},
+
+	{RF_G_BAND | RF_BW_20,				{MT_BBP(AGC, 53), 0x26262A2F}},
+	{RF_G_BAND | RF_BW_40,				{MT_BBP(AGC, 53), 0x2626322F}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 53), 0xFFFFFFFF}},
+
+	{RF_G_BAND | RF_BW_20,				{MT_BBP(AGC, 55), 0x40404E58}},
+	{RF_G_BAND | RF_BW_40,				{MT_BBP(AGC, 55), 0x40405858}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 55), 0xFFFFFFFF}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(AGC, 58), 0x00001010}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(AGC, 58), 0x00000000}},
+
+	{RF_G_BAND | RF_BW_20 | RF_BW_40,		{MT_BBP(RXFE, 0), 0x3D5000E0}},
+	{RF_A_BAND | RF_BW_20 | RF_BW_40 | RF_BW_80,	{MT_BBP(RXFE, 0), 0x895000E0}},
+};
+
+static const struct mt76_reg_pair mt76x0_dcoc_tab[] = {
+	{MT_BBP(CAL, 47), 0x000010F0 },
+	{MT_BBP(CAL, 48), 0x00008080 },
+	{MT_BBP(CAL, 49), 0x00000F07 },
+	{MT_BBP(CAL, 50), 0x00000040 },
+	{MT_BBP(CAL, 51), 0x00000404 },
+	{MT_BBP(CAL, 52), 0x00080803 },
+	{MT_BBP(CAL, 53), 0x00000704 },
+	{MT_BBP(CAL, 54), 0x00002828 },
+	{MT_BBP(CAL, 55), 0x00005050 },
+};
+
+#endif
-- 
1.9.3

[PATCH v2 08/12] mt76x0: eeprom files

[Stanislaw Gruszka]

Add eeprom files of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c | 445 +++++++++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h | 149 +++++++
 2 files changed, 594 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c
new file mode 100644
index 000000000000..1ecd018f12b8
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c
@@ -0,0 +1,445 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/etherdevice.h>
+#include <asm/unaligned.h>
+#include "mt76x0.h"
+#include "eeprom.h"
+
+static bool
+field_valid(u8 val)
+{
+	return val != 0xff;
+}
+
+static s8
+field_validate(u8 val)
+{
+	if (!field_valid(val))
+		return 0;
+
+	return val;
+}
+
+static inline int
+sign_extend(u32 val, unsigned int size)
+{
+	bool sign = val & BIT(size - 1);
+
+	val &= BIT(size - 1) - 1;
+
+	return sign ? val : -val;
+}
+
+static int
+mt76x0_efuse_read(struct mt76x0_dev *dev, u16 addr, u8 *data,
+		   enum mt76x0_eeprom_access_modes mode)
+{
+	u32 val;
+	int i;
+
+	val = mt76_rr(dev, MT_EFUSE_CTRL);
+	val &= ~(MT_EFUSE_CTRL_AIN |
+		 MT_EFUSE_CTRL_MODE);
+	val |= FIELD_PREP(MT_EFUSE_CTRL_AIN, addr & ~0xf) |
+	       FIELD_PREP(MT_EFUSE_CTRL_MODE, mode) |
+	       MT_EFUSE_CTRL_KICK;
+	mt76_wr(dev, MT_EFUSE_CTRL, val);
+
+	if (!mt76_poll(dev, MT_EFUSE_CTRL, MT_EFUSE_CTRL_KICK, 0, 1000))
+		return -ETIMEDOUT;
+
+	val = mt76_rr(dev, MT_EFUSE_CTRL);
+	if ((val & MT_EFUSE_CTRL_AOUT) == MT_EFUSE_CTRL_AOUT) {
+		/* Parts of eeprom not in the usage map (0x80-0xc0,0xf0)
+		 * will not return valid data but it's ok.
+		 */
+		memset(data, 0xff, 16);
+		return 0;
+	}
+
+	for (i = 0; i < 4; i++) {
+		val = mt76_rr(dev, MT_EFUSE_DATA(i));
+		put_unaligned_le32(val, data + 4 * i);
+	}
+
+	return 0;
+}
+
+static int
+mt76x0_efuse_physical_size_check(struct mt76x0_dev *dev)
+{
+	const int map_reads = DIV_ROUND_UP(MT_EFUSE_USAGE_MAP_SIZE, 16);
+	u8 data[map_reads * 16];
+	int ret, i;
+	u32 start = 0, end = 0, cnt_free;
+
+	for (i = 0; i < map_reads; i++) {
+		ret = mt76x0_efuse_read(dev, MT_EE_USAGE_MAP_START + i * 16,
+					 data + i * 16, MT_EE_PHYSICAL_READ);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < MT_EFUSE_USAGE_MAP_SIZE; i++)
+		if (!data[i]) {
+			if (!start)
+				start = MT_EE_USAGE_MAP_START + i;
+			end = MT_EE_USAGE_MAP_START + i;
+		}
+	cnt_free = end - start + 1;
+
+	if (MT_EFUSE_USAGE_MAP_SIZE - cnt_free < 5) {
+		dev_err(dev->mt76.dev, "Error: your device needs default EEPROM file and this driver doesn't support it!\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void
+mt76x0_set_chip_cap(struct mt76x0_dev *dev, u8 *eeprom)
+{
+	enum mt76x2_board_type { BOARD_TYPE_2GHZ = 1, BOARD_TYPE_5GHZ = 2 };
+	u16 nic_conf0 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_0);
+	u16 nic_conf1 = get_unaligned_le16(eeprom + MT_EE_NIC_CONF_1);
+
+	dev_dbg(dev->mt76.dev, "NIC_CONF0: %04x NIC_CONF1: %04x\n", nic_conf0, nic_conf1);
+
+	switch (FIELD_GET(MT_EE_NIC_CONF_0_BOARD_TYPE, nic_conf0)) {
+	case BOARD_TYPE_5GHZ:
+		dev->ee->has_5ghz = true;
+		break;
+	case BOARD_TYPE_2GHZ:
+		dev->ee->has_2ghz = true;
+		break;
+	default:
+		dev->ee->has_2ghz = true;
+		dev->ee->has_5ghz = true;
+		break;
+	}
+
+	dev_dbg(dev->mt76.dev, "Has 2GHZ %d 5GHZ %d\n", dev->ee->has_2ghz, dev->ee->has_5ghz);
+
+	if (!field_valid(nic_conf1 & 0xff))
+		nic_conf1 &= 0xff00;
+
+	if (nic_conf1 & MT_EE_NIC_CONF_1_HW_RF_CTRL)
+		dev_err(dev->mt76.dev,
+			"Error: this driver does not support HW RF ctrl\n");
+
+	if (!field_valid(nic_conf0 >> 8))
+		return;
+
+	if (FIELD_GET(MT_EE_NIC_CONF_0_RX_PATH, nic_conf0) > 1 ||
+	    FIELD_GET(MT_EE_NIC_CONF_0_TX_PATH, nic_conf0) > 1)
+		dev_err(dev->mt76.dev,
+			"Error: device has more than 1 RX/TX stream!\n");
+
+	dev->ee->pa_type = FIELD_GET(MT_EE_NIC_CONF_0_PA_TYPE, nic_conf0);
+	dev_dbg(dev->mt76.dev, "PA Type %d\n", dev->ee->pa_type);
+}
+
+static int
+mt76x0_set_macaddr(struct mt76x0_dev *dev, const u8 *eeprom)
+{
+	const void *src = eeprom + MT_EE_MAC_ADDR;
+
+	ether_addr_copy(dev->macaddr, src);
+
+	if (!is_valid_ether_addr(dev->macaddr)) {
+		eth_random_addr(dev->macaddr);
+		dev_info(dev->mt76.dev,
+			 "Invalid MAC address, using random address %pM\n",
+			 dev->macaddr);
+	}
+
+	mt76_wr(dev, MT_MAC_ADDR_DW0, get_unaligned_le32(dev->macaddr));
+	mt76_wr(dev, MT_MAC_ADDR_DW1, get_unaligned_le16(dev->macaddr + 4) |
+		FIELD_PREP(MT_MAC_ADDR_DW1_U2ME_MASK, 0xff));
+
+	return 0;
+}
+
+static void
+mt76x0_set_temp_offset(struct mt76x0_dev *dev, u8 *eeprom)
+{
+	u8 temp = eeprom[MT_EE_TEMP_OFFSET];
+
+	if (field_valid(temp))
+		dev->ee->temp_off = sign_extend(temp, 8);
+	else
+		dev->ee->temp_off = -10;
+}
+
+static void
+mt76x0_set_country_reg(struct mt76x0_dev *dev, u8 *eeprom)
+{
+	/* Note: - region 31 is not valid for mt76x0 (see rtmp_init.c)
+	 *	 - comments in rtmp_def.h are incorrect (see rt_channel.c)
+	 */
+	static const struct reg_channel_bounds chan_bounds[] = {
+		/* EEPROM country regions 0 - 7 */
+		{  1, 11 },	{  1, 13 },	{ 10,  2 },	{ 10,  4 },
+		{ 14,  1 },	{  1, 14 },	{  3,  7 },	{  5,  9 },
+		/* EEPROM country regions 32 - 33 */
+		{  1, 11 },	{  1, 14 }
+	};
+	u8 val = eeprom[MT_EE_COUNTRY_REGION_2GHZ];
+	int idx = -1;
+
+	dev_dbg(dev->mt76.dev, "REG 2GHZ %u REG 5GHZ %u\n", val, eeprom[MT_EE_COUNTRY_REGION_5GHZ]);
+	if (val < 8)
+		idx = val;
+	if (val > 31 && val < 33)
+		idx = val - 32 + 8;
+
+	if (idx != -1)
+		dev_info(dev->mt76.dev,
+			 "EEPROM country region %02hhx (channels %hhd-%hhd)\n",
+			 val, chan_bounds[idx].start,
+			 chan_bounds[idx].start + chan_bounds[idx].num - 1);
+	else
+		idx = 5; /* channels 1 - 14 */
+
+	dev->ee->reg = chan_bounds[idx];
+
+	/* TODO: country region 33 is special - phy should be set to B-mode
+	 *	 before entering channel 14 (see sta/connect.c)
+	 */
+}
+
+static void
+mt76x0_set_rf_freq_off(struct mt76x0_dev *dev, u8 *eeprom)
+{
+	u8 comp;
+
+	dev->ee->rf_freq_off = field_validate(eeprom[MT_EE_FREQ_OFFSET]);
+	comp = field_validate(eeprom[MT_EE_FREQ_OFFSET_COMPENSATION]);
+
+	if (comp & BIT(7))
+		dev->ee->rf_freq_off -= comp & 0x7f;
+	else
+		dev->ee->rf_freq_off += comp;
+}
+
+static void
+mt76x0_set_lna_gain(struct mt76x0_dev *dev, u8 *eeprom)
+{
+	s8 gain;
+
+	dev->ee->lna_gain_2ghz = eeprom[MT_EE_LNA_GAIN_2GHZ];
+	dev->ee->lna_gain_5ghz[0] = eeprom[MT_EE_LNA_GAIN_5GHZ_0];
+
+	gain = eeprom[MT_EE_LNA_GAIN_5GHZ_1];
+	if (gain == 0xff || gain == 0)
+		dev->ee->lna_gain_5ghz[1] = dev->ee->lna_gain_5ghz[0];
+	else
+		dev->ee->lna_gain_5ghz[1] = gain;
+
+	gain = eeprom[MT_EE_LNA_GAIN_5GHZ_2];
+	if (gain == 0xff || gain == 0)
+		dev->ee->lna_gain_5ghz[2] = dev->ee->lna_gain_5ghz[0];
+	else
+		dev->ee->lna_gain_5ghz[2] = gain;
+}
+
+static void
+mt76x0_set_rssi_offset(struct mt76x0_dev *dev, u8 *eeprom)
+{
+	int i;
+	s8 *rssi_offset = dev->ee->rssi_offset_2ghz;
+
+	for (i = 0; i < 2; i++) {
+		rssi_offset[i] = eeprom[MT_EE_RSSI_OFFSET + i];
+
+		if (rssi_offset[i] < -10 || rssi_offset[i] > 10) {
+			dev_warn(dev->mt76.dev,
+				 "Warning: EEPROM RSSI is invalid %02hhx\n",
+				 rssi_offset[i]);
+			rssi_offset[i] = 0;
+		}
+	}
+
+	rssi_offset = dev->ee->rssi_offset_5ghz;
+
+	for (i = 0; i < 3; i++) {
+		rssi_offset[i] = eeprom[MT_EE_RSSI_OFFSET_5GHZ + i];
+
+		if (rssi_offset[i] < -10 || rssi_offset[i] > 10) {
+			dev_warn(dev->mt76.dev,
+				 "Warning: EEPROM RSSI is invalid %02hhx\n",
+				 rssi_offset[i]);
+			rssi_offset[i] = 0;
+		}
+	}
+}
+
+static u32
+calc_bw40_power_rate(u32 value, int delta)
+{
+	u32 ret = 0;
+	int i, tmp;
+
+	for (i = 0; i < 4; i++) {
+		tmp = s6_to_int((value >> i*8) & 0xff) + delta;
+		ret |= (u32)(int_to_s6(tmp)) << i*8;
+	}
+
+	return ret;
+}
+
+static s8
+get_delta(u8 val)
+{
+	s8 ret;
+
+	if (!field_valid(val) || !(val & BIT(7)))
+		return 0;
+
+	ret = val & 0x1f;
+	if (ret > 8)
+		ret = 8;
+	if (val & BIT(6))
+		ret = -ret;
+
+	return ret;
+}
+
+static void
+mt76x0_set_tx_power_per_rate(struct mt76x0_dev *dev, u8 *eeprom)
+{
+	s8 bw40_delta_2g, bw40_delta_5g;
+	u32 val;
+	int i;
+
+	bw40_delta_2g = get_delta(eeprom[MT_EE_TX_POWER_DELTA_BW40]);
+	bw40_delta_5g = get_delta(eeprom[MT_EE_TX_POWER_DELTA_BW40 + 1]);
+
+	for (i = 0; i < 5; i++) {
+		val = get_unaligned_le32(eeprom + MT_EE_TX_POWER_BYRATE(i));
+
+		/* Skip last 16 bits. */
+		if (i == 4)
+			val &= 0x0000ffff;
+
+		dev->ee->tx_pwr_cfg_2g[i][0] = val;
+		dev->ee->tx_pwr_cfg_2g[i][1] = calc_bw40_power_rate(val, bw40_delta_2g);
+	}
+
+	/* Reading per rate tx power for 5 GHz band is a bit more complex. Note
+	 * we mix 16 bit and 32 bit reads and sometimes do shifts.
+	 */
+	val = get_unaligned_le16(eeprom + 0x120);
+	val <<= 16;
+	dev->ee->tx_pwr_cfg_5g[0][0] = val;
+	dev->ee->tx_pwr_cfg_5g[0][1] = calc_bw40_power_rate(val, bw40_delta_5g);
+
+	val = get_unaligned_le32(eeprom + 0x122);
+	dev->ee->tx_pwr_cfg_5g[1][0] = val;
+	dev->ee->tx_pwr_cfg_5g[1][1] = calc_bw40_power_rate(val, bw40_delta_5g);
+
+	val = get_unaligned_le16(eeprom + 0x126);
+	dev->ee->tx_pwr_cfg_5g[2][0] = val;
+	dev->ee->tx_pwr_cfg_5g[2][1] = calc_bw40_power_rate(val, bw40_delta_5g);
+
+	val = get_unaligned_le16(eeprom + 0xec);
+	val <<= 16;
+	dev->ee->tx_pwr_cfg_5g[3][0] = val;
+	dev->ee->tx_pwr_cfg_5g[3][1] = calc_bw40_power_rate(val, bw40_delta_5g);
+
+	val = get_unaligned_le16(eeprom + 0xee);
+	dev->ee->tx_pwr_cfg_5g[4][0] = val;
+	dev->ee->tx_pwr_cfg_5g[4][1] = calc_bw40_power_rate(val, bw40_delta_5g);
+}
+
+static void
+mt76x0_set_tx_power_per_chan(struct mt76x0_dev *dev, u8 *eeprom)
+{
+	int i;
+	u8 tx_pwr;
+
+	for (i = 0; i < 14; i++) {
+		tx_pwr = eeprom[MT_EE_TX_POWER_OFFSET_2GHZ + i];
+		if (tx_pwr <= 0x3f && tx_pwr > 0)
+			dev->ee->tx_pwr_per_chan[i] = tx_pwr;
+		else
+			dev->ee->tx_pwr_per_chan[i] = 5;
+	}
+
+	for (i = 0; i < 40; i++) {
+		tx_pwr = eeprom[MT_EE_TX_POWER_OFFSET_5GHZ + i];
+		if (tx_pwr <= 0x3f && tx_pwr > 0)
+			dev->ee->tx_pwr_per_chan[14 + i] = tx_pwr;
+		else
+			dev->ee->tx_pwr_per_chan[14 + i] = 5;
+	}
+
+	dev->ee->tx_pwr_per_chan[54] = dev->ee->tx_pwr_per_chan[22];
+	dev->ee->tx_pwr_per_chan[55] = dev->ee->tx_pwr_per_chan[28];
+	dev->ee->tx_pwr_per_chan[56] = dev->ee->tx_pwr_per_chan[34];
+	dev->ee->tx_pwr_per_chan[57] = dev->ee->tx_pwr_per_chan[44];
+}
+
+int
+mt76x0_eeprom_init(struct mt76x0_dev *dev)
+{
+	u8 *eeprom;
+	int i, ret;
+
+	ret = mt76x0_efuse_physical_size_check(dev);
+	if (ret)
+		return ret;
+
+	dev->ee = devm_kzalloc(dev->mt76.dev, sizeof(*dev->ee), GFP_KERNEL);
+	if (!dev->ee)
+		return -ENOMEM;
+
+	eeprom = kmalloc(MT76X0_EEPROM_SIZE, GFP_KERNEL);
+	if (!eeprom)
+		return -ENOMEM;
+
+	for (i = 0; i + 16 <= MT76X0_EEPROM_SIZE; i += 16) {
+		ret = mt76x0_efuse_read(dev, i, eeprom + i, MT_EE_READ);
+		if (ret)
+			goto out;
+	}
+
+	if (eeprom[MT_EE_VERSION_EE] > MT76X0U_EE_MAX_VER)
+		dev_warn(dev->mt76.dev,
+			 "Warning: unsupported EEPROM version %02hhx\n",
+			 eeprom[MT_EE_VERSION_EE]);
+	dev_info(dev->mt76.dev, "EEPROM ver:%02hhx fae:%02hhx\n",
+		 eeprom[MT_EE_VERSION_EE], eeprom[MT_EE_VERSION_FAE]);
+
+	mt76x0_set_macaddr(dev, eeprom);
+	mt76x0_set_chip_cap(dev, eeprom);
+	mt76x0_set_country_reg(dev, eeprom);
+	mt76x0_set_rf_freq_off(dev, eeprom);
+	mt76x0_set_temp_offset(dev, eeprom);
+	mt76x0_set_lna_gain(dev, eeprom);
+	mt76x0_set_rssi_offset(dev, eeprom);
+	dev->chainmask = 0x0101;
+
+	mt76x0_set_tx_power_per_rate(dev, eeprom);
+	mt76x0_set_tx_power_per_chan(dev, eeprom);
+
+out:
+	kfree(eeprom);
+	return ret;
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h
new file mode 100644
index 000000000000..e37b573aed7b
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT76X0U_EEPROM_H
+#define __MT76X0U_EEPROM_H
+
+struct mt76x0_dev;
+
+#define MT76X0U_EE_MAX_VER			0x0c
+#define MT76X0_EEPROM_SIZE			512
+
+#define MT76X0U_DEFAULT_TX_POWER		6
+
+enum mt76_eeprom_field {
+	MT_EE_CHIP_ID =				0x00,
+	MT_EE_VERSION_FAE =			0x02,
+	MT_EE_VERSION_EE =			0x03,
+	MT_EE_MAC_ADDR =			0x04,
+	MT_EE_NIC_CONF_0 =			0x34,
+	MT_EE_NIC_CONF_1 =			0x36,
+	MT_EE_COUNTRY_REGION_5GHZ =		0x38,
+	MT_EE_COUNTRY_REGION_2GHZ =		0x39,
+	MT_EE_FREQ_OFFSET =			0x3a,
+	MT_EE_NIC_CONF_2 =			0x42,
+
+	MT_EE_LNA_GAIN_2GHZ =			0x44,
+	MT_EE_LNA_GAIN_5GHZ_0 =			0x45,
+	MT_EE_RSSI_OFFSET =			0x46,
+	MT_EE_RSSI_OFFSET_5GHZ =		0x4a,
+	MT_EE_LNA_GAIN_5GHZ_1 =			0x49,
+	MT_EE_LNA_GAIN_5GHZ_2 =			0x4d,
+
+	MT_EE_TX_POWER_DELTA_BW40 =		0x50,
+
+	MT_EE_TX_POWER_OFFSET_2GHZ =		0x52,
+
+	MT_EE_TX_TSSI_SLOPE =			0x6e,
+	MT_EE_TX_TSSI_OFFSET_GROUP =		0x6f,
+	MT_EE_TX_TSSI_OFFSET =			0x76,
+
+	MT_EE_TX_POWER_OFFSET_5GHZ =		0x78,
+
+	MT_EE_TEMP_OFFSET =			0xd1,
+	MT_EE_FREQ_OFFSET_COMPENSATION =	0xdb,
+	MT_EE_TX_POWER_BYRATE_BASE =		0xde,
+
+	MT_EE_TX_POWER_BYRATE_BASE_5GHZ =	0x120,
+
+	MT_EE_USAGE_MAP_START =			0x1e0,
+	MT_EE_USAGE_MAP_END =			0x1fc,
+};
+
+#define MT_EE_NIC_CONF_0_RX_PATH		GENMASK(3, 0)
+#define MT_EE_NIC_CONF_0_TX_PATH		GENMASK(7, 4)
+#define MT_EE_NIC_CONF_0_PA_TYPE		GENMASK(9, 8)
+#define MT_EE_NIC_CONF_0_BOARD_TYPE		GENMASK(13, 12)
+
+#define MT_EE_NIC_CONF_1_HW_RF_CTRL		BIT(0)
+#define MT_EE_NIC_CONF_1_TEMP_TX_ALC		BIT(1)
+#define MT_EE_NIC_CONF_1_LNA_EXT_2G		BIT(2)
+#define MT_EE_NIC_CONF_1_LNA_EXT_5G		BIT(3)
+#define MT_EE_NIC_CONF_1_TX_ALC_EN		BIT(13)
+
+#define MT_EE_NIC_CONF_2_RX_STREAM		GENMASK(3, 0)
+#define MT_EE_NIC_CONF_2_TX_STREAM		GENMASK(7, 4)
+#define MT_EE_NIC_CONF_2_HW_ANTDIV		BIT(8)
+#define MT_EE_NIC_CONF_2_XTAL_OPTION		GENMASK(10, 9)
+#define MT_EE_NIC_CONF_2_TEMP_DISABLE		BIT(11)
+#define MT_EE_NIC_CONF_2_COEX_METHOD		GENMASK(15, 13)
+
+#define MT_EE_TX_POWER_BYRATE(i)		(MT_EE_TX_POWER_BYRATE_BASE + \
+						 (i) * 4)
+
+#define MT_EFUSE_USAGE_MAP_SIZE			(MT_EE_USAGE_MAP_END -	\
+						 MT_EE_USAGE_MAP_START + 1)
+
+enum mt76x0_eeprom_access_modes {
+	MT_EE_READ = 0,
+	MT_EE_PHYSICAL_READ = 1,
+};
+
+struct reg_channel_bounds {
+	u8 start;
+	u8 num;
+};
+
+struct mt76x0_eeprom_params {
+	u8 rf_freq_off;
+	s16 temp_off;
+	s8 rssi_offset_2ghz[2];
+	s8 rssi_offset_5ghz[3];
+	s8 lna_gain_2ghz;
+	s8 lna_gain_5ghz[3];
+	u8 pa_type;
+
+	/* TX_PWR_CFG_* values from EEPROM for 20 and 40 Mhz bandwidths. */
+	u32 tx_pwr_cfg_2g[5][2];
+	u32 tx_pwr_cfg_5g[5][2];
+
+	u8 tx_pwr_per_chan[58];
+
+	struct reg_channel_bounds reg;
+
+	bool has_2ghz;
+	bool has_5ghz;
+};
+
+int mt76x0_eeprom_init(struct mt76x0_dev *dev);
+
+static inline u32 s6_validate(u32 reg)
+{
+	WARN_ON(reg & ~GENMASK(5, 0));
+	return reg & GENMASK(5, 0);
+}
+
+static inline int s6_to_int(u32 reg)
+{
+	int s6;
+
+	s6 = s6_validate(reg);
+	if (s6 & BIT(5))
+		s6 -= BIT(6);
+
+	return s6;
+}
+
+static inline u32 int_to_s6(int val)
+{
+	if (val < -0x20)
+		return 0x20;
+	if (val > 0x1f)
+		return 0x1f;
+
+	return val & 0x3f;
+}
+
+#endif
-- 
1.9.3

[PATCH v2 09/12] mt76x0: trace and debugfs files

[Stanislaw Gruszka]

Add trace and debugfs files of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 .../net/wireless/mediatek/mt76/mt76x0/debugfs.c    | 166 ++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/trace.c  |  21 ++
 drivers/net/wireless/mediatek/mt76/mt76x0/trace.h  | 366 +++++++++++++++++++++
 3 files changed, 553 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/debugfs.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/trace.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/trace.h

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt76x0/debugfs.c
new file mode 100644
index 000000000000..e7a77a886068
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/debugfs.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+
+#include "mt76x0.h"
+#include "eeprom.h"
+
+static int
+mt76_reg_set(void *data, u64 val)
+{
+	struct mt76x0_dev *dev = data;
+
+	mt76_wr(dev, dev->debugfs_reg, val);
+	return 0;
+}
+
+static int
+mt76_reg_get(void *data, u64 *val)
+{
+	struct mt76x0_dev *dev = data;
+
+	*val = mt76_rr(dev, dev->debugfs_reg);
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_regval, mt76_reg_get, mt76_reg_set, "0x%08llx\n");
+
+static int
+mt76x0_ampdu_stat_read(struct seq_file *file, void *data)
+{
+	struct mt76x0_dev *dev = file->private;
+	int i, j;
+
+#define stat_printf(grp, off, name)					\
+	seq_printf(file, #name ":\t%llu\n", dev->stats.grp[off])
+
+	stat_printf(rx_stat, 0, rx_crc_err);
+	stat_printf(rx_stat, 1, rx_phy_err);
+	stat_printf(rx_stat, 2, rx_false_cca);
+	stat_printf(rx_stat, 3, rx_plcp_err);
+	stat_printf(rx_stat, 4, rx_fifo_overflow);
+	stat_printf(rx_stat, 5, rx_duplicate);
+
+	stat_printf(tx_stat, 0, tx_fail_cnt);
+	stat_printf(tx_stat, 1, tx_bcn_cnt);
+	stat_printf(tx_stat, 2, tx_success);
+	stat_printf(tx_stat, 3, tx_retransmit);
+	stat_printf(tx_stat, 4, tx_zero_len);
+	stat_printf(tx_stat, 5, tx_underflow);
+
+	stat_printf(aggr_stat, 0, non_aggr_tx);
+	stat_printf(aggr_stat, 1, aggr_tx);
+
+	stat_printf(zero_len_del, 0, tx_zero_len_del);
+	stat_printf(zero_len_del, 1, rx_zero_len_del);
+#undef stat_printf
+
+	seq_puts(file, "Aggregations stats:\n");
+	for (i = 0; i < 4; i++) {
+		for (j = 0; j < 8; j++)
+			seq_printf(file, "%08llx ",
+				   dev->stats.aggr_n[i * 8 + j]);
+		seq_putc(file, '\n');
+	}
+
+	seq_printf(file, "recent average AMPDU len: %d\n",
+		   atomic_read(&dev->avg_ampdu_len));
+
+	return 0;
+}
+
+static int
+mt76x0_ampdu_stat_open(struct inode *inode, struct file *f)
+{
+	return single_open(f, mt76x0_ampdu_stat_read, inode->i_private);
+}
+
+static const struct file_operations fops_ampdu_stat = {
+	.open = mt76x0_ampdu_stat_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static int
+mt76x0_eeprom_param_read(struct seq_file *file, void *data)
+{
+	struct mt76x0_dev *dev = file->private;
+	int i;
+
+	seq_printf(file, "RF freq offset: %hhx\n", dev->ee->rf_freq_off);
+	seq_printf(file, "RSSI offset 2GHz: %hhx %hhx\n",
+		   dev->ee->rssi_offset_2ghz[0], dev->ee->rssi_offset_2ghz[1]);
+	seq_printf(file, "RSSI offset 5GHz: %hhx %hhx %hhx\n",
+		   dev->ee->rssi_offset_5ghz[0], dev->ee->rssi_offset_5ghz[1],
+		   dev->ee->rssi_offset_5ghz[2]);
+	seq_printf(file, "Temperature offset: %hhx\n", dev->ee->temp_off);
+	seq_printf(file, "LNA gain 2Ghz: %hhx\n", dev->ee->lna_gain_2ghz);
+	seq_printf(file, "LNA gain 5Ghz: %hhx %hhx %hhx\n",
+		   dev->ee->lna_gain_5ghz[0], dev->ee->lna_gain_5ghz[1],
+		   dev->ee->lna_gain_5ghz[2]);
+	seq_printf(file, "Power Amplifier type %hhx\n", dev->ee->pa_type);
+	seq_printf(file, "Reg channels: %hhu-%hhu\n", dev->ee->reg.start,
+		   dev->ee->reg.start + dev->ee->reg.num - 1);
+
+	seq_puts(file, "Per channel power:\n");
+	for (i = 0; i < 58; i++)
+		seq_printf(file, "\t%d chan:%d pwr:%d\n", i, i,
+			   dev->ee->tx_pwr_per_chan[i]);
+
+	seq_puts(file, "Per rate power 2GHz:\n");
+	for (i = 0; i < 5; i++)
+		seq_printf(file, "\t %d bw20:%d bw40:%d\n",
+			   i, dev->ee->tx_pwr_cfg_2g[i][0],
+			      dev->ee->tx_pwr_cfg_5g[i][1]);
+
+	seq_puts(file, "Per rate power 5GHz:\n");
+	for (i = 0; i < 5; i++)
+		seq_printf(file, "\t %d bw20:%d bw40:%d\n",
+			   i, dev->ee->tx_pwr_cfg_5g[i][0],
+			      dev->ee->tx_pwr_cfg_5g[i][1]);
+
+	return 0;
+}
+
+static int
+mt76x0_eeprom_param_open(struct inode *inode, struct file *f)
+{
+	return single_open(f, mt76x0_eeprom_param_read, inode->i_private);
+}
+
+static const struct file_operations fops_eeprom_param = {
+	.open = mt76x0_eeprom_param_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+void mt76x0_init_debugfs(struct mt76x0_dev *dev)
+{
+	struct dentry *dir;
+
+	dir = debugfs_create_dir("mt76x0", dev->mt76.hw->wiphy->debugfsdir);
+	if (!dir)
+		return;
+
+	debugfs_create_u32("regidx", S_IRUSR | S_IWUSR, dir, &dev->debugfs_reg);
+	debugfs_create_file("regval", S_IRUSR | S_IWUSR, dir, dev,
+			    &fops_regval);
+	debugfs_create_file("ampdu_stat", S_IRUSR, dir, dev, &fops_ampdu_stat);
+	debugfs_create_file("eeprom_param", S_IRUSR, dir, dev,
+			    &fops_eeprom_param);
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/trace.c b/drivers/net/wireless/mediatek/mt76/mt76x0/trace.c
new file mode 100644
index 000000000000..8abdd3cd546d
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/trace.c
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+
+#ifndef __CHECKER__
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
+#endif
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/trace.h b/drivers/net/wireless/mediatek/mt76/mt76x0/trace.h
new file mode 100644
index 000000000000..cdf53e5442d8
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/trace.h
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#if !defined(__MT76X0U_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __MT76X0U_TRACE_H
+
+#include <linux/tracepoint.h>
+#include "mt76x0.h"
+#include "mac.h"
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mt76x0
+
+#define MAXNAME		32
+#define DEV_ENTRY	__array(char, wiphy_name, 32)
+#define DEV_ASSIGN	strlcpy(__entry->wiphy_name,			\
+				wiphy_name(dev->hw->wiphy), MAXNAME)
+#define DEV_PR_FMT	"%s "
+#define DEV_PR_ARG	__entry->wiphy_name
+
+#define REG_ENTRY	__field(u32, reg) __field(u32, val)
+#define REG_ASSIGN	__entry->reg = reg; __entry->val = val
+#define REG_PR_FMT	"%04x=%08x"
+#define REG_PR_ARG	__entry->reg, __entry->val
+
+DECLARE_EVENT_CLASS(dev_reg_evt,
+	TP_PROTO(struct mt76_dev *dev, u32 reg, u32 val),
+	TP_ARGS(dev, reg, val),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		REG_ENTRY
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		REG_ASSIGN;
+	),
+	TP_printk(
+		DEV_PR_FMT REG_PR_FMT,
+		DEV_PR_ARG, REG_PR_ARG
+	)
+);
+
+DEFINE_EVENT(dev_reg_evt, reg_read,
+	TP_PROTO(struct mt76_dev *dev, u32 reg, u32 val),
+	TP_ARGS(dev, reg, val)
+);
+
+DEFINE_EVENT(dev_reg_evt, reg_write,
+	TP_PROTO(struct mt76_dev *dev, u32 reg, u32 val),
+	TP_ARGS(dev, reg, val)
+);
+
+TRACE_EVENT(mt_submit_urb,
+	TP_PROTO(struct mt76_dev *dev, struct urb *u),
+	TP_ARGS(dev, u),
+	TP_STRUCT__entry(
+		DEV_ENTRY __field(unsigned, pipe) __field(u32, len)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->pipe = u->pipe;
+		__entry->len = u->transfer_buffer_length;
+	),
+	TP_printk(DEV_PR_FMT "p:%08x len:%u",
+		  DEV_PR_ARG, __entry->pipe, __entry->len)
+);
+
+#define trace_mt_submit_urb_sync(__dev, __pipe, __len) ({	\
+	struct urb u;					\
+	u.pipe = __pipe;				\
+	u.transfer_buffer_length = __len;		\
+	trace_mt_submit_urb(__dev, &u);			\
+})
+
+TRACE_EVENT(mt_mcu_msg_send,
+	TP_PROTO(struct mt76_dev *dev,
+		 struct sk_buff *skb, u32 csum, bool resp),
+	TP_ARGS(dev, skb, csum, resp),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(u32, info)
+		__field(u32, csum)
+		__field(bool, resp)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->info = *(u32 *)skb->data;
+		__entry->csum = csum;
+		__entry->resp = resp;
+	),
+	TP_printk(DEV_PR_FMT "i:%08x c:%08x r:%d",
+		  DEV_PR_ARG, __entry->info, __entry->csum, __entry->resp)
+);
+
+TRACE_EVENT(mt_vend_req,
+	TP_PROTO(struct mt76_dev *dev, unsigned pipe, u8 req, u8 req_type,
+		 u16 val, u16 offset, void *buf, size_t buflen, int ret),
+	TP_ARGS(dev, pipe, req, req_type, val, offset, buf, buflen, ret),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(unsigned, pipe) __field(u8, req) __field(u8, req_type)
+		__field(u16, val) __field(u16, offset) __field(void*, buf)
+		__field(int, buflen) __field(int, ret)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->pipe = pipe;
+		__entry->req = req;
+		__entry->req_type = req_type;
+		__entry->val = val;
+		__entry->offset = offset;
+		__entry->buf = buf;
+		__entry->buflen = buflen;
+		__entry->ret = ret;
+	),
+	TP_printk(DEV_PR_FMT
+		  "%d p:%08x req:%02hhx %02hhx val:%04hx %04hx buf:%d %d",
+		  DEV_PR_ARG, __entry->ret, __entry->pipe, __entry->req,
+		  __entry->req_type, __entry->val, __entry->offset,
+		  !!__entry->buf, __entry->buflen)
+);
+
+TRACE_EVENT(ee_read,
+	TP_PROTO(struct mt76_dev *dev, int offset, u16 val),
+	TP_ARGS(dev, offset, val),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(int, o) __field(u16, v)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->o = offset;
+		__entry->v = val;
+	),
+	TP_printk(DEV_PR_FMT "%04x=%04x", DEV_PR_ARG, __entry->o, __entry->v)
+);
+
+DECLARE_EVENT_CLASS(dev_rf_reg_evt,
+	TP_PROTO(struct mt76_dev *dev, u8 bank, u8 reg, u8 val),
+	TP_ARGS(dev, bank, reg, val),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(u8, bank)
+		__field(u8, reg)
+		__field(u8, val)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		REG_ASSIGN;
+		__entry->bank = bank;
+	),
+	TP_printk(
+		DEV_PR_FMT "%02hhx:%02hhx=%02hhx",
+		DEV_PR_ARG, __entry->bank, __entry->reg, __entry->val
+	)
+);
+
+DEFINE_EVENT(dev_rf_reg_evt, rf_read,
+	TP_PROTO(struct mt76_dev *dev, u8 bank, u8 reg, u8 val),
+	TP_ARGS(dev, bank, reg, val)
+);
+
+DEFINE_EVENT(dev_rf_reg_evt, rf_write,
+	TP_PROTO(struct mt76_dev *dev, u8 bank, u8 reg, u8 val),
+	TP_ARGS(dev, bank, reg, val)
+);
+
+DECLARE_EVENT_CLASS(dev_bbp_reg_evt,
+	TP_PROTO(struct mt76_dev *dev, u8 reg, u8 val),
+	TP_ARGS(dev, reg, val),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(u8, reg)
+		__field(u8, val)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		REG_ASSIGN;
+	),
+	TP_printk(
+		DEV_PR_FMT "%02hhx=%02hhx",
+		DEV_PR_ARG, __entry->reg, __entry->val
+	)
+);
+
+DEFINE_EVENT(dev_bbp_reg_evt, bbp_read,
+	TP_PROTO(struct mt76_dev *dev, u8 reg, u8 val),
+	TP_ARGS(dev, reg, val)
+);
+
+DEFINE_EVENT(dev_bbp_reg_evt, bbp_write,
+	TP_PROTO(struct mt76_dev *dev, u8 reg, u8 val),
+	TP_ARGS(dev, reg, val)
+);
+
+DECLARE_EVENT_CLASS(dev_simple_evt,
+	TP_PROTO(struct mt76_dev *dev, u8 val),
+	TP_ARGS(dev, val),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(u8, val)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->val = val;
+	),
+	TP_printk(
+		DEV_PR_FMT "%02hhx", DEV_PR_ARG, __entry->val
+	)
+);
+
+DEFINE_EVENT(dev_simple_evt, temp_mode,
+	TP_PROTO(struct mt76_dev *dev, u8 val),
+	TP_ARGS(dev, val)
+);
+
+DEFINE_EVENT(dev_simple_evt, read_temp,
+	TP_PROTO(struct mt76_dev *dev, u8 val),
+	TP_ARGS(dev, val)
+);
+
+TRACE_EVENT(mt_rx,
+	TP_PROTO(struct mt76_dev *dev, struct mt76x0_rxwi *rxwi, u32 f),
+	TP_ARGS(dev, rxwi, f),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field_struct(struct mt76x0_rxwi, rxwi)
+		__field(u32, fce_info)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->rxwi = *rxwi;
+		__entry->fce_info = f;
+	),
+	TP_printk(DEV_PR_FMT "rxi:%08x ctl:%08x", DEV_PR_ARG,
+		  le32_to_cpu(__entry->rxwi.rxinfo),
+		  le32_to_cpu(__entry->rxwi.ctl))
+);
+
+TRACE_EVENT(mt_tx,
+	TP_PROTO(struct mt76_dev *dev, struct sk_buff *skb,
+		 struct mt76_sta *sta, struct mt76_txwi *h),
+	TP_ARGS(dev, skb, sta, h),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field_struct(struct mt76_txwi, h)
+		__field(struct sk_buff *, skb)
+		__field(struct mt76_sta *, sta)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->h = *h;
+		__entry->skb = skb;
+		__entry->sta = sta;
+	),
+	TP_printk(DEV_PR_FMT "skb:%p sta:%p  flg:%04hx rate_ctl:%04hx "
+		  "ack:%02hhx wcid:%02hhx len_ctl:%05hx", DEV_PR_ARG,
+		  __entry->skb, __entry->sta,
+		  le16_to_cpu(__entry->h.flags),
+		  le16_to_cpu(__entry->h.rate_ctl),
+		  __entry->h.ack_ctl, __entry->h.wcid,
+		  le16_to_cpu(__entry->h.len_ctl))
+);
+
+TRACE_EVENT(mt_tx_dma_done,
+	TP_PROTO(struct mt76_dev *dev, struct sk_buff *skb),
+	TP_ARGS(dev, skb),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(struct sk_buff *, skb)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->skb = skb;
+	),
+	TP_printk(DEV_PR_FMT "%p", DEV_PR_ARG, __entry->skb)
+);
+
+TRACE_EVENT(mt_tx_status_cleaned,
+	TP_PROTO(struct mt76_dev *dev, int cleaned),
+	TP_ARGS(dev, cleaned),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(int, cleaned)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->cleaned = cleaned;
+	),
+	TP_printk(DEV_PR_FMT "%d", DEV_PR_ARG, __entry->cleaned)
+);
+
+TRACE_EVENT(mt_tx_status,
+	TP_PROTO(struct mt76_dev *dev, u32 stat1, u32 stat2),
+	TP_ARGS(dev, stat1, stat2),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(u32, stat1)	__field(u32, stat2)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->stat1 = stat1;
+		__entry->stat2 = stat2;
+	),
+	TP_printk(DEV_PR_FMT "%08x %08x",
+		  DEV_PR_ARG, __entry->stat1, __entry->stat2)
+);
+
+TRACE_EVENT(mt_rx_dma_aggr,
+	TP_PROTO(struct mt76_dev *dev, int cnt, bool paged),
+	TP_ARGS(dev, cnt, paged),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(u8, cnt)
+		__field(bool, paged)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->cnt = cnt;
+		__entry->paged = paged;
+	),
+	TP_printk(DEV_PR_FMT "cnt:%d paged:%d",
+		  DEV_PR_ARG, __entry->cnt, __entry->paged)
+);
+
+DEFINE_EVENT(dev_simple_evt, set_key,
+	TP_PROTO(struct mt76_dev *dev, u8 val),
+	TP_ARGS(dev, val)
+);
+
+TRACE_EVENT(set_shared_key,
+	TP_PROTO(struct mt76_dev *dev, u8 vid, u8 key),
+	TP_ARGS(dev, vid, key),
+	TP_STRUCT__entry(
+		DEV_ENTRY
+		__field(u8, vid)
+		__field(u8, key)
+	),
+	TP_fast_assign(
+		DEV_ASSIGN;
+		__entry->vid = vid;
+		__entry->key = key;
+	),
+	TP_printk(DEV_PR_FMT "phy:%02hhx off:%02hhx",
+		  DEV_PR_ARG, __entry->vid, __entry->key)
+);
+
+#endif
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
-- 
1.9.3

[PATCH v2 10/12] mt76x0: dma and tx files

[Stanislaw Gruszka]

Add dma and tx files of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/dma.c | 522 ++++++++++++++++++++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/dma.h | 126 ++++++
 drivers/net/wireless/mediatek/mt76/mt76x0/tx.c  | 270 ++++++++++++
 3 files changed, 918 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/dma.c
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/dma.h
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/tx.c

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/dma.c b/drivers/net/wireless/mediatek/mt76/mt76x0/dma.c
new file mode 100644
index 000000000000..2cf71283de3f
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/dma.c
@@ -0,0 +1,522 @@
+/*
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt76x0.h"
+#include "dma.h"
+#include "usb.h"
+#include "trace.h"
+
+static int mt76x0_submit_rx_buf(struct mt76x0_dev *dev,
+				 struct mt76x0_dma_buf_rx *e, gfp_t gfp);
+
+static unsigned int ieee80211_get_hdrlen_from_buf(const u8 *data, unsigned len)
+{
+	const struct ieee80211_hdr *hdr = (const struct ieee80211_hdr *)data;
+	unsigned int hdrlen;
+
+	if (unlikely(len < 10))
+		return 0;
+	hdrlen = ieee80211_hdrlen(hdr->frame_control);
+	if (unlikely(hdrlen > len))
+		return 0;
+	return hdrlen;
+}
+
+static struct sk_buff *
+mt76x0_rx_skb_from_seg(struct mt76x0_dev *dev, struct mt76x0_rxwi *rxwi,
+			void *data, u32 seg_len, u32 truesize, struct page *p)
+{
+	struct sk_buff *skb;
+	u32 true_len, hdr_len = 0, copy, frag;
+
+	skb = alloc_skb(p ? 128 : seg_len, GFP_ATOMIC);
+	if (!skb)
+		return NULL;
+
+	true_len = mt76_mac_process_rx(dev, skb, data, rxwi);
+	if (!true_len || true_len > seg_len)
+		goto bad_frame;
+
+	hdr_len = ieee80211_get_hdrlen_from_buf(data, true_len);
+	if (!hdr_len)
+		goto bad_frame;
+
+	if (rxwi->rxinfo & cpu_to_le32(MT_RXINFO_L2PAD)) {
+		memcpy(skb_put(skb, hdr_len), data, hdr_len);
+
+		data += hdr_len + 2;
+		true_len -= hdr_len;
+		hdr_len = 0;
+	}
+
+	/* If not doing paged RX allocated skb will always have enough space */
+	copy = (true_len <= skb_tailroom(skb)) ? true_len : hdr_len + 8;
+	frag = true_len - copy;
+
+	memcpy(skb_put(skb, copy), data, copy);
+	data += copy;
+
+	if (frag) {
+		skb_add_rx_frag(skb, 0, p, data - page_address(p),
+				frag, truesize);
+		get_page(p);
+	}
+
+	return skb;
+
+bad_frame:
+	dev_err_ratelimited(dev->mt76.dev, "Error: incorrect frame len:%u hdr:%u\n",
+			    true_len, hdr_len);
+	dev_kfree_skb(skb);
+	return NULL;
+}
+
+static void mt76x0_rx_process_seg(struct mt76x0_dev *dev, u8 *data,
+				   u32 seg_len, struct page *p)
+{
+	struct sk_buff *skb;
+	struct mt76x0_rxwi *rxwi;
+	u32 fce_info, truesize = seg_len;
+
+	/* DMA_INFO field at the beginning of the segment contains only some of
+	 * the information, we need to read the FCE descriptor from the end.
+	 */
+	fce_info = get_unaligned_le32(data + seg_len - MT_FCE_INFO_LEN);
+	seg_len -= MT_FCE_INFO_LEN;
+
+	data += MT_DMA_HDR_LEN;
+	seg_len -= MT_DMA_HDR_LEN;
+
+	rxwi = (struct mt76x0_rxwi *) data;
+	data += sizeof(struct mt76x0_rxwi);
+	seg_len -= sizeof(struct mt76x0_rxwi);
+
+	if (unlikely(FIELD_GET(MT_RXD_INFO_TYPE, fce_info)))
+		dev_err_once(dev->mt76.dev, "Error: RX path seen a non-pkt urb\n");
+
+	trace_mt_rx(&dev->mt76, rxwi, fce_info);
+
+	skb = mt76x0_rx_skb_from_seg(dev, rxwi, data, seg_len, truesize, p);
+	if (!skb)
+		return;
+
+	spin_lock(&dev->mac_lock);
+	ieee80211_rx(dev->mt76.hw, skb);
+	spin_unlock(&dev->mac_lock);
+}
+
+static u16 mt76x0_rx_next_seg_len(u8 *data, u32 data_len)
+{
+	u32 min_seg_len = MT_DMA_HDR_LEN + MT_RX_INFO_LEN +
+		sizeof(struct mt76x0_rxwi) + MT_FCE_INFO_LEN;
+	u16 dma_len = get_unaligned_le16(data);
+
+	if (data_len < min_seg_len ||
+	    WARN_ON(!dma_len) ||
+	    WARN_ON(dma_len + MT_DMA_HDRS > data_len) ||
+	    WARN_ON(dma_len & 0x3))
+		return 0;
+
+	return MT_DMA_HDRS + dma_len;
+}
+
+static void
+mt76x0_rx_process_entry(struct mt76x0_dev *dev, struct mt76x0_dma_buf_rx *e)
+{
+	u32 seg_len, data_len = e->urb->actual_length;
+	u8 *data = page_address(e->p);
+	struct page *new_p = NULL;
+	int cnt = 0;
+
+	if (!test_bit(MT76_STATE_INITIALIZED, &dev->mt76.state))
+		return;
+
+	/* Copy if there is very little data in the buffer. */
+	if (data_len > 512)
+		new_p = dev_alloc_pages(MT_RX_ORDER);
+
+	while ((seg_len = mt76x0_rx_next_seg_len(data, data_len))) {
+		mt76x0_rx_process_seg(dev, data, seg_len, new_p ? e->p : NULL);
+
+		data_len -= seg_len;
+		data += seg_len;
+		cnt++;
+	}
+
+	if (cnt > 1)
+		trace_mt_rx_dma_aggr(&dev->mt76, cnt, !!new_p);
+
+	if (new_p) {
+		/* we have one extra ref from the allocator */
+		__free_pages(e->p, MT_RX_ORDER);
+
+		e->p = new_p;
+	}
+}
+
+static struct mt76x0_dma_buf_rx *
+mt76x0_rx_get_pending_entry(struct mt76x0_dev *dev)
+{
+	struct mt76x0_rx_queue *q = &dev->rx_q;
+	struct mt76x0_dma_buf_rx *buf = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->rx_lock, flags);
+
+	if (!q->pending)
+		goto out;
+
+	buf = &q->e[q->start];
+	q->pending--;
+	q->start = (q->start + 1) % q->entries;
+out:
+	spin_unlock_irqrestore(&dev->rx_lock, flags);
+
+	return buf;
+}
+
+static void mt76x0_complete_rx(struct urb *urb)
+{
+	struct mt76x0_dev *dev = urb->context;
+	struct mt76x0_rx_queue *q = &dev->rx_q;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->rx_lock, flags);
+
+	if (mt76x0_urb_has_error(urb))
+		dev_err(dev->mt76.dev, "Error: RX urb failed:%d\n", urb->status);
+	if (WARN_ONCE(q->e[q->end].urb != urb, "RX urb mismatch"))
+		goto out;
+
+	q->end = (q->end + 1) % q->entries;
+	q->pending++;
+	tasklet_schedule(&dev->rx_tasklet);
+out:
+	spin_unlock_irqrestore(&dev->rx_lock, flags);
+}
+
+static void mt76x0_rx_tasklet(unsigned long data)
+{
+	struct mt76x0_dev *dev = (struct mt76x0_dev *) data;
+	struct mt76x0_dma_buf_rx *e;
+
+	while ((e = mt76x0_rx_get_pending_entry(dev))) {
+		if (e->urb->status)
+			continue;
+
+		mt76x0_rx_process_entry(dev, e);
+		mt76x0_submit_rx_buf(dev, e, GFP_ATOMIC);
+	}
+}
+
+static void mt76x0_complete_tx(struct urb *urb)
+{
+	struct mt76x0_tx_queue *q = urb->context;
+	struct mt76x0_dev *dev = q->dev;
+	struct sk_buff *skb;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->tx_lock, flags);
+
+	if (mt76x0_urb_has_error(urb))
+		dev_err(dev->mt76.dev, "Error: TX urb failed:%d\n", urb->status);
+	if (WARN_ONCE(q->e[q->start].urb != urb, "TX urb mismatch"))
+		goto out;
+
+	skb = q->e[q->start].skb;
+	trace_mt_tx_dma_done(&dev->mt76, skb);
+
+	__skb_queue_tail(&dev->tx_skb_done, skb);
+	tasklet_schedule(&dev->tx_tasklet);
+
+	if (q->used == q->entries - q->entries / 8)
+		ieee80211_wake_queue(dev->mt76.hw, skb_get_queue_mapping(skb));
+
+	q->start = (q->start + 1) % q->entries;
+	q->used--;
+out:
+	spin_unlock_irqrestore(&dev->tx_lock, flags);
+}
+
+static void mt76x0_tx_tasklet(unsigned long data)
+{
+	struct mt76x0_dev *dev = (struct mt76x0_dev *) data;
+	struct sk_buff_head skbs;
+	unsigned long flags;
+
+	__skb_queue_head_init(&skbs);
+
+	spin_lock_irqsave(&dev->tx_lock, flags);
+
+	set_bit(MT76_MORE_STATS, &dev->mt76.state);
+	if (!test_and_set_bit(MT76_READING_STATS, &dev->mt76.state))
+		queue_delayed_work(dev->stat_wq, &dev->stat_work,
+				   msecs_to_jiffies(10));
+
+	skb_queue_splice_init(&dev->tx_skb_done, &skbs);
+
+	spin_unlock_irqrestore(&dev->tx_lock, flags);
+
+	while (!skb_queue_empty(&skbs)) {
+		struct sk_buff *skb = __skb_dequeue(&skbs);
+
+		mt76x0_tx_status(dev, skb);
+	}
+}
+
+static int mt76x0_dma_submit_tx(struct mt76x0_dev *dev,
+				 struct sk_buff *skb, u8 ep)
+{
+	struct usb_device *usb_dev = mt76x0_to_usb_dev(dev);
+	unsigned snd_pipe = usb_sndbulkpipe(usb_dev, dev->out_ep[ep]);
+	struct mt76x0_dma_buf_tx *e;
+	struct mt76x0_tx_queue *q = &dev->tx_q[ep];
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&dev->tx_lock, flags);
+
+	if (WARN_ON_ONCE(q->entries <= q->used)) {
+		ret = -ENOSPC;
+		goto out;
+	}
+
+	e = &q->e[q->end];
+	e->skb = skb;
+	usb_fill_bulk_urb(e->urb, usb_dev, snd_pipe, skb->data, skb->len,
+			  mt76x0_complete_tx, q);
+	ret = usb_submit_urb(e->urb, GFP_ATOMIC);
+	if (ret) {
+		/* Special-handle ENODEV from TX urb submission because it will
+		 * often be the first ENODEV we see after device is removed.
+		 */
+		if (ret == -ENODEV)
+			set_bit(MT76_REMOVED, &dev->mt76.state);
+		else
+			dev_err(dev->mt76.dev, "Error: TX urb submit failed:%d\n",
+				ret);
+		goto out;
+	}
+
+	q->end = (q->end + 1) % q->entries;
+	q->used++;
+
+	if (q->used >= q->entries)
+		ieee80211_stop_queue(dev->mt76.hw, skb_get_queue_mapping(skb));
+out:
+	spin_unlock_irqrestore(&dev->tx_lock, flags);
+
+	return ret;
+}
+
+/* Map USB endpoint number to Q id in the DMA engine */
+static enum mt76_qsel ep2dmaq(u8 ep)
+{
+	if (ep == 5)
+		return MT_QSEL_MGMT;
+	return MT_QSEL_EDCA;
+}
+
+int mt76x0_dma_enqueue_tx(struct mt76x0_dev *dev, struct sk_buff *skb,
+			   struct mt76_wcid *wcid, int hw_q)
+{
+	u8 ep = q2ep(hw_q);
+	u32 dma_flags;
+	int ret;
+
+	dma_flags = MT_TXD_PKT_INFO_80211;
+	if (wcid->hw_key_idx == 0xff)
+		dma_flags |= MT_TXD_PKT_INFO_WIV;
+
+	ret = mt76x0_dma_skb_wrap_pkt(skb, ep2dmaq(ep), dma_flags);
+	if (ret)
+		return ret;
+
+	ret = mt76x0_dma_submit_tx(dev, skb, ep);
+
+	if (ret) {
+		ieee80211_free_txskb(dev->mt76.hw, skb);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void mt76x0_kill_rx(struct mt76x0_dev *dev)
+{
+	int i;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->rx_lock, flags);
+
+	for (i = 0; i < dev->rx_q.entries; i++) {
+		int next = dev->rx_q.end;
+
+		spin_unlock_irqrestore(&dev->rx_lock, flags);
+		usb_poison_urb(dev->rx_q.e[next].urb);
+		spin_lock_irqsave(&dev->rx_lock, flags);
+	}
+
+	spin_unlock_irqrestore(&dev->rx_lock, flags);
+}
+
+static int mt76x0_submit_rx_buf(struct mt76x0_dev *dev,
+				 struct mt76x0_dma_buf_rx *e, gfp_t gfp)
+{
+	struct usb_device *usb_dev = mt76x0_to_usb_dev(dev);
+	u8 *buf = page_address(e->p);
+	unsigned pipe;
+	int ret;
+
+	pipe = usb_rcvbulkpipe(usb_dev, dev->in_ep[MT_EP_IN_PKT_RX]);
+
+	usb_fill_bulk_urb(e->urb, usb_dev, pipe, buf, MT_RX_URB_SIZE,
+			  mt76x0_complete_rx, dev);
+
+	trace_mt_submit_urb(&dev->mt76, e->urb);
+	ret = usb_submit_urb(e->urb, gfp);
+	if (ret)
+		dev_err(dev->mt76.dev, "Error: submit RX URB failed:%d\n", ret);
+
+	return ret;
+}
+
+static int mt76x0_submit_rx(struct mt76x0_dev *dev)
+{
+	int i, ret;
+
+	for (i = 0; i < dev->rx_q.entries; i++) {
+		ret = mt76x0_submit_rx_buf(dev, &dev->rx_q.e[i], GFP_KERNEL);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void mt76x0_free_rx(struct mt76x0_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < dev->rx_q.entries; i++) {
+		__free_pages(dev->rx_q.e[i].p, MT_RX_ORDER);
+		usb_free_urb(dev->rx_q.e[i].urb);
+	}
+}
+
+static int mt76x0_alloc_rx(struct mt76x0_dev *dev)
+{
+	int i;
+
+	memset(&dev->rx_q, 0, sizeof(dev->rx_q));
+	dev->rx_q.dev = dev;
+	dev->rx_q.entries = N_RX_ENTRIES;
+
+	for (i = 0; i < N_RX_ENTRIES; i++) {
+		dev->rx_q.e[i].urb = usb_alloc_urb(0, GFP_KERNEL);
+		dev->rx_q.e[i].p = dev_alloc_pages(MT_RX_ORDER);
+
+		if (!dev->rx_q.e[i].urb || !dev->rx_q.e[i].p)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void mt76x0_free_tx_queue(struct mt76x0_tx_queue *q)
+{
+	int i;
+
+	WARN_ON(q->used);
+
+	for (i = 0; i < q->entries; i++)  {
+		usb_poison_urb(q->e[i].urb);
+		usb_free_urb(q->e[i].urb);
+	}
+}
+
+static void mt76x0_free_tx(struct mt76x0_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < __MT_EP_OUT_MAX; i++)
+		mt76x0_free_tx_queue(&dev->tx_q[i]);
+}
+
+static int mt76x0_alloc_tx_queue(struct mt76x0_dev *dev,
+				  struct mt76x0_tx_queue *q)
+{
+	int i;
+
+	q->dev = dev;
+	q->entries = N_TX_ENTRIES;
+
+	for (i = 0; i < N_TX_ENTRIES; i++) {
+		q->e[i].urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!q->e[i].urb)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int mt76x0_alloc_tx(struct mt76x0_dev *dev)
+{
+	int i;
+
+	dev->tx_q = devm_kcalloc(dev->mt76.dev, __MT_EP_OUT_MAX,
+				 sizeof(*dev->tx_q), GFP_KERNEL);
+
+	for (i = 0; i < __MT_EP_OUT_MAX; i++)
+		if (mt76x0_alloc_tx_queue(dev, &dev->tx_q[i]))
+			return -ENOMEM;
+
+	return 0;
+}
+
+int mt76x0_dma_init(struct mt76x0_dev *dev)
+{
+	int ret = -ENOMEM;
+
+	tasklet_init(&dev->tx_tasklet, mt76x0_tx_tasklet, (unsigned long) dev);
+	tasklet_init(&dev->rx_tasklet, mt76x0_rx_tasklet, (unsigned long) dev);
+
+	ret = mt76x0_alloc_tx(dev);
+	if (ret)
+		goto err;
+	ret = mt76x0_alloc_rx(dev);
+	if (ret)
+		goto err;
+
+	ret = mt76x0_submit_rx(dev);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	mt76x0_dma_cleanup(dev);
+	return ret;
+}
+
+void mt76x0_dma_cleanup(struct mt76x0_dev *dev)
+{
+	mt76x0_kill_rx(dev);
+
+	tasklet_kill(&dev->rx_tasklet);
+
+	mt76x0_free_rx(dev);
+	mt76x0_free_tx(dev);
+
+	tasklet_kill(&dev->tx_tasklet);
+}
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/dma.h b/drivers/net/wireless/mediatek/mt76/mt76x0/dma.h
new file mode 100644
index 000000000000..891ce1c3461f
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/dma.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MT76X0U_DMA_H
+#define __MT76X0U_DMA_H
+
+#include <asm/unaligned.h>
+#include <linux/skbuff.h>
+
+#define MT_DMA_HDR_LEN			4
+#define MT_RX_INFO_LEN			4
+#define MT_FCE_INFO_LEN			4
+#define MT_DMA_HDRS			(MT_DMA_HDR_LEN + MT_RX_INFO_LEN)
+
+/* Common Tx DMA descriptor fields */
+#define MT_TXD_INFO_LEN		GENMASK(15, 0)
+#define MT_TXD_INFO_D_PORT	GENMASK(29, 27)
+#define MT_TXD_INFO_TYPE	GENMASK(31, 30)
+
+/* Tx DMA MCU command specific flags */
+#define MT_TXD_CMD_SEQ		GENMASK(19, 16)
+#define MT_TXD_CMD_TYPE		GENMASK(26, 20)
+
+enum mt76_msg_port {
+	WLAN_PORT,
+	CPU_RX_PORT,
+	CPU_TX_PORT,
+	HOST_PORT,
+	VIRTUAL_CPU_RX_PORT,
+	VIRTUAL_CPU_TX_PORT,
+	DISCARD,
+};
+
+enum mt76_info_type {
+	DMA_PACKET,
+	DMA_COMMAND,
+};
+
+/* Tx DMA packet specific flags */
+#define MT_TXD_PKT_INFO_NEXT_VLD	BIT(16)
+#define MT_TXD_PKT_INFO_TX_BURST	BIT(17)
+#define MT_TXD_PKT_INFO_80211		BIT(19)
+#define MT_TXD_PKT_INFO_TSO		BIT(20)
+#define MT_TXD_PKT_INFO_CSO		BIT(21)
+#define MT_TXD_PKT_INFO_WIV		BIT(24)
+#define MT_TXD_PKT_INFO_QSEL		GENMASK(26, 25)
+
+enum mt76_qsel {
+	MT_QSEL_MGMT,
+	MT_QSEL_HCCA,
+	MT_QSEL_EDCA,
+	MT_QSEL_EDCA_2,
+};
+
+
+static inline int mt76x0_dma_skb_wrap(struct sk_buff *skb,
+				       enum mt76_msg_port d_port,
+				       enum mt76_info_type type, u32 flags)
+{
+	u32 info;
+
+	/* Buffer layout:
+	 *	|   4B   | xfer len |      pad       |  4B  |
+	 *	| TXINFO | pkt/cmd  | zero pad to 4B | zero |
+	 *
+	 * length field of TXINFO should be set to 'xfer len'.
+	 */
+
+	info = flags |
+		FIELD_PREP(MT_TXD_INFO_LEN, round_up(skb->len, 4)) |
+		FIELD_PREP(MT_TXD_INFO_D_PORT, d_port) |
+		FIELD_PREP(MT_TXD_INFO_TYPE, type);
+
+	put_unaligned_le32(info, skb_push(skb, sizeof(info)));
+	return skb_put_padto(skb, round_up(skb->len, 4) + 4);
+}
+
+static inline int
+mt76x0_dma_skb_wrap_pkt(struct sk_buff *skb, enum mt76_qsel qsel, u32 flags)
+{
+	flags |= FIELD_PREP(MT_TXD_PKT_INFO_QSEL, qsel);
+	return mt76x0_dma_skb_wrap(skb, WLAN_PORT, DMA_PACKET, flags);
+}
+
+/* Common Rx DMA descriptor fields */
+#define MT_RXD_INFO_LEN			GENMASK(13, 0)
+#define MT_RXD_INFO_PCIE_INTR		BIT(24)
+#define MT_RXD_INFO_QSEL		GENMASK(26, 25)
+#define MT_RXD_INFO_PORT		GENMASK(29, 27)
+#define MT_RXD_INFO_TYPE		GENMASK(31, 30)
+
+/* Rx DMA packet specific flags */
+#define MT_RXD_PKT_INFO_UDP_ERR		BIT(16)
+#define MT_RXD_PKT_INFO_TCP_ERR		BIT(17)
+#define MT_RXD_PKT_INFO_IP_ERR		BIT(18)
+#define MT_RXD_PKT_INFO_PKT_80211	BIT(19)
+#define MT_RXD_PKT_INFO_L3L4_DONE	BIT(20)
+#define MT_RXD_PKT_INFO_MAC_LEN		GENMASK(23, 21)
+
+/* Rx DMA MCU command specific flags */
+#define MT_RXD_CMD_INFO_SELF_GEN	BIT(15)
+#define MT_RXD_CMD_INFO_CMD_SEQ		GENMASK(19, 16)
+#define MT_RXD_CMD_INFO_EVT_TYPE	GENMASK(23, 20)
+
+enum mt76_evt_type {
+	CMD_DONE,
+	CMD_ERROR,
+	CMD_RETRY,
+	EVENT_PWR_RSP,
+	EVENT_WOW_RSP,
+	EVENT_CARRIER_DETECT_RSP,
+	EVENT_DFS_DETECT_RSP,
+};
+
+#endif
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/tx.c b/drivers/net/wireless/mediatek/mt76/mt76x0/tx.c
new file mode 100644
index 000000000000..28b8e1508016
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/tx.c
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt76x0.h"
+#include "trace.h"
+
+/* Take mac80211 Q id from the skb and translate it to hardware Q id */
+static u8 skb2q(struct sk_buff *skb)
+{
+	int qid = skb_get_queue_mapping(skb);
+
+	if (WARN_ON(qid >= MT_TXQ_PSD)) {
+		qid = MT_TXQ_BE;
+		skb_set_queue_mapping(skb, qid);
+	}
+
+	return q2hwq(qid);
+}
+
+static void mt76x0_tx_skb_remove_dma_overhead(struct sk_buff *skb,
+					       struct ieee80211_tx_info *info)
+{
+	int pkt_len = (unsigned long)info->status.status_driver_data[0];
+
+	skb_pull(skb, sizeof(struct mt76_txwi) + 4);
+	if (ieee80211_get_hdrlen_from_skb(skb) % 4)
+		mt76_remove_hdr_pad(skb);
+
+	skb_trim(skb, pkt_len);
+}
+
+void mt76x0_tx_status(struct mt76x0_dev *dev, struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	mt76x0_tx_skb_remove_dma_overhead(skb, info);
+
+	ieee80211_tx_info_clear_status(info);
+	info->status.rates[0].idx = -1;
+	info->flags |= IEEE80211_TX_STAT_ACK;
+
+	spin_lock(&dev->mac_lock);
+	ieee80211_tx_status(dev->mt76.hw, skb);
+	spin_unlock(&dev->mac_lock);
+}
+
+static int mt76x0_skb_rooms(struct mt76x0_dev *dev, struct sk_buff *skb)
+{
+	int hdr_len = ieee80211_get_hdrlen_from_skb(skb);
+	u32 need_head;
+
+	need_head = sizeof(struct mt76_txwi) + 4;
+	if (hdr_len % 4)
+		need_head += 2;
+
+	return skb_cow(skb, need_head);
+}
+
+static struct mt76_txwi *
+mt76x0_push_txwi(struct mt76x0_dev *dev, struct sk_buff *skb,
+		  struct ieee80211_sta *sta, struct mt76_wcid *wcid,
+		  int pkt_len)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_tx_rate *rate = &info->control.rates[0];
+	struct mt76_txwi *txwi;
+	unsigned long flags;
+	u16 txwi_flags = 0;
+	u32 pkt_id;
+	u16 rate_ctl;
+	u8 nss;
+
+	txwi = (struct mt76_txwi *)skb_push(skb, sizeof(struct mt76_txwi));
+	memset(txwi, 0, sizeof(*txwi));
+
+	if (!wcid->tx_rate_set)
+		ieee80211_get_tx_rates(info->control.vif, sta, skb,
+				       info->control.rates, 1);
+
+	spin_lock_irqsave(&dev->mt76.lock, flags);
+	if (rate->idx < 0 || !rate->count) {
+		rate_ctl = wcid->tx_rate;
+		nss = wcid->tx_rate_nss;
+	} else {
+		rate_ctl = mt76_mac_tx_rate_val(dev, rate, &nss);
+	}
+	spin_unlock_irqrestore(&dev->mt76.lock, flags);
+
+	txwi->rate_ctl = cpu_to_le16(rate_ctl);
+
+	if (info->flags & IEEE80211_TX_CTL_LDPC)
+		txwi->rate_ctl |= cpu_to_le16(MT_RXWI_RATE_LDPC);
+	if ((info->flags & IEEE80211_TX_CTL_STBC) && nss == 1)
+		txwi->rate_ctl |= cpu_to_le16(MT_RXWI_RATE_STBC);
+	if (nss > 1 && sta && sta->smps_mode == IEEE80211_SMPS_DYNAMIC)
+		txwi_flags |= MT_TXWI_FLAGS_MMPS;
+
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+		txwi->ack_ctl |= MT_TXWI_ACK_CTL_REQ;
+		pkt_id = 1;
+	} else {
+		pkt_id = 0;
+	}
+
+	if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)
+		pkt_id |= MT_TXWI_PKTID_PROBE;
+
+	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+		txwi->ack_ctl |= MT_TXWI_ACK_CTL_NSEQ;
+
+	if ((info->flags & IEEE80211_TX_CTL_AMPDU) && sta) {
+		u8 ba_size = IEEE80211_MIN_AMPDU_BUF;
+
+		ba_size <<= sta->ht_cap.ampdu_factor;
+		ba_size = min_t(int, 7, ba_size - 1);
+		if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) {
+			ba_size = 0;
+		} else {
+			txwi_flags |= MT_TXWI_FLAGS_AMPDU;
+			txwi_flags |= FIELD_PREP(MT_TXWI_FLAGS_MPDU_DENSITY,
+						 sta->ht_cap.ampdu_density);
+		}
+		txwi->ack_ctl |= FIELD_PREP(MT_TXWI_ACK_CTL_BA_WINDOW, ba_size);
+	}
+
+	txwi->wcid = wcid->idx;
+	txwi->flags |= cpu_to_le16(txwi_flags);
+	txwi->len_ctl = cpu_to_le16(pkt_len);
+	txwi->pktid = pkt_id;
+
+	return txwi;
+}
+
+void mt76x0_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
+		struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct mt76x0_dev *dev = hw->priv;
+	struct ieee80211_vif *vif = info->control.vif;
+	struct ieee80211_sta *sta = control->sta;
+	struct mt76_sta *msta = NULL;
+	struct mt76_wcid *wcid = dev->mon_wcid;
+	struct mt76_txwi *txwi;
+	int pkt_len = skb->len;
+	int hw_q = skb2q(skb);
+
+	BUILD_BUG_ON(ARRAY_SIZE(info->status.status_driver_data) < 1);
+	info->status.status_driver_data[0] = (void *)(unsigned long)pkt_len;
+
+	if (mt76x0_skb_rooms(dev, skb) || mt76_insert_hdr_pad(skb)) {
+		ieee80211_free_txskb(dev->mt76.hw, skb);
+		return;
+	}
+
+	if (sta) {
+		msta = (struct mt76_sta *) sta->drv_priv;
+		wcid = &msta->wcid;
+	} else if (vif && (!info->control.hw_key && wcid->hw_key_idx != -1)) {
+		struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv;
+
+		wcid = &mvif->group_wcid;
+	}
+
+	txwi = mt76x0_push_txwi(dev, skb, sta, wcid, pkt_len);
+
+	if (mt76x0_dma_enqueue_tx(dev, skb, wcid, hw_q))
+		return;
+
+	trace_mt_tx(&dev->mt76, skb, msta, txwi);
+}
+
+void mt76x0_tx_stat(struct work_struct *work)
+{
+	struct mt76x0_dev *dev = container_of(work, struct mt76x0_dev,
+					       stat_work.work);
+	struct mt76_tx_status stat;
+	unsigned long flags;
+	int cleaned = 0;
+	u8 update = 1;
+
+	while (!test_bit(MT76_REMOVED, &dev->mt76.state)) {
+		stat = mt76x0_mac_fetch_tx_status(dev);
+		if (!stat.valid)
+			break;
+
+		mt76_send_tx_status(dev, &stat, &update);
+
+		cleaned++;
+	}
+	trace_mt_tx_status_cleaned(&dev->mt76, cleaned);
+
+	spin_lock_irqsave(&dev->tx_lock, flags);
+	if (cleaned)
+		queue_delayed_work(dev->stat_wq, &dev->stat_work,
+				   msecs_to_jiffies(10));
+	else if (test_and_clear_bit(MT76_MORE_STATS, &dev->mt76.state))
+		queue_delayed_work(dev->stat_wq, &dev->stat_work,
+				   msecs_to_jiffies(20));
+	else
+		clear_bit(MT76_READING_STATS, &dev->mt76.state);
+	spin_unlock_irqrestore(&dev->tx_lock, flags);
+}
+
+int mt76x0_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		    u16 queue, const struct ieee80211_tx_queue_params *params)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	u8 cw_min = 5, cw_max = 10, hw_q = q2hwq(queue);
+	u32 val;
+
+	/* TODO: should we do funny things with the parameters?
+	 *	 See what mt76x0_set_default_edca() used to do in init.c.
+	 */
+
+	if (params->cw_min)
+		cw_min = fls(params->cw_min);
+	if (params->cw_max)
+		cw_max = fls(params->cw_max);
+
+	WARN_ON(params->txop > 0xff);
+	WARN_ON(params->aifs > 0xf);
+	WARN_ON(cw_min > 0xf);
+	WARN_ON(cw_max > 0xf);
+
+	val = FIELD_PREP(MT_EDCA_CFG_AIFSN, params->aifs) |
+	      FIELD_PREP(MT_EDCA_CFG_CWMIN, cw_min) |
+	      FIELD_PREP(MT_EDCA_CFG_CWMAX, cw_max);
+	/* TODO: based on user-controlled EnableTxBurst var vendor drv sets
+	 *	 a really long txop on AC0 (see connect.c:2009) but only on
+	 *	 connect? When not connected should be 0.
+	 */
+	if (!hw_q)
+		val |= 0x60;
+	else
+		val |= FIELD_PREP(MT_EDCA_CFG_TXOP, params->txop);
+	mt76_wr(dev, MT_EDCA_CFG_AC(hw_q), val);
+
+	val = mt76_rr(dev, MT_WMM_TXOP(hw_q));
+	val &= ~(MT_WMM_TXOP_MASK << MT_WMM_TXOP_SHIFT(hw_q));
+	val |= params->txop << MT_WMM_TXOP_SHIFT(hw_q);
+	mt76_wr(dev, MT_WMM_TXOP(hw_q), val);
+
+	val = mt76_rr(dev, MT_WMM_AIFSN);
+	val &= ~(MT_WMM_AIFSN_MASK << MT_WMM_AIFSN_SHIFT(hw_q));
+	val |= params->aifs << MT_WMM_AIFSN_SHIFT(hw_q);
+	mt76_wr(dev, MT_WMM_AIFSN, val);
+
+	val = mt76_rr(dev, MT_WMM_CWMIN);
+	val &= ~(MT_WMM_CWMIN_MASK << MT_WMM_CWMIN_SHIFT(hw_q));
+	val |= cw_min << MT_WMM_CWMIN_SHIFT(hw_q);
+	mt76_wr(dev, MT_WMM_CWMIN, val);
+
+	val = mt76_rr(dev, MT_WMM_CWMAX);
+	val &= ~(MT_WMM_CWMAX_MASK << MT_WMM_CWMAX_SHIFT(hw_q));
+	val |= cw_max << MT_WMM_CWMAX_SHIFT(hw_q);
+	mt76_wr(dev, MT_WMM_CWMAX, val);
+
+	return 0;
+}
-- 
1.9.3

[PATCH v2 11/12] mt76x0: main file

[Stanislaw Gruszka]

Add main file of mt76x0 driver.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/main.c | 403 +++++++++++++++++++++++
 1 file changed, 403 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/main.c

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/main.c b/drivers/net/wireless/mediatek/mt76/mt76x0/main.c
new file mode 100644
index 000000000000..0c521f3485c9
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/main.c
@@ -0,0 +1,403 @@
+/*
+ * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
+ * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "mt76x0.h"
+#include "mac.h"
+#include <linux/etherdevice.h>
+
+static int mt76x0_start(struct ieee80211_hw *hw)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	int ret;
+
+	mutex_lock(&dev->mutex);
+
+	ret = mt76x0_mac_start(dev);
+	if (ret)
+		goto out;
+
+	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->mac_work,
+				     MT_CALIBRATE_INTERVAL);
+	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
+				     MT_CALIBRATE_INTERVAL);
+out:
+	mutex_unlock(&dev->mutex);
+	return ret;
+}
+
+static void mt76x0_stop(struct ieee80211_hw *hw)
+{
+	struct mt76x0_dev *dev = hw->priv;
+
+	mutex_lock(&dev->mutex);
+
+	cancel_delayed_work_sync(&dev->cal_work);
+	cancel_delayed_work_sync(&dev->mac_work);
+	mt76x0_mac_stop(dev);
+
+	mutex_unlock(&dev->mutex);
+}
+
+
+static int mt76x0_add_interface(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv;
+	unsigned int idx;
+
+	idx = ffs(~dev->vif_mask);
+	if (!idx || idx > 8)
+		return -ENOSPC;
+
+	idx--;
+	dev->vif_mask |= BIT(idx);
+
+	mvif->idx = idx;
+	mvif->group_wcid.idx = GROUP_WCID(idx);
+	mvif->group_wcid.hw_key_idx = -1;
+
+	return 0;
+}
+
+static void mt76x0_remove_interface(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv;
+	unsigned int wcid = mvif->group_wcid.idx;
+
+	dev->wcid_mask[wcid / BITS_PER_LONG] &= ~BIT(wcid % BITS_PER_LONG);
+}
+
+static int mt76x0_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	int ret = 0;
+
+	mutex_lock(&dev->mutex);
+
+	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+		if (!(hw->conf.flags & IEEE80211_CONF_MONITOR))
+			dev->rxfilter |= MT_RX_FILTR_CFG_PROMISC;
+		else
+			dev->rxfilter &= ~MT_RX_FILTR_CFG_PROMISC;
+
+		mt76_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		ieee80211_stop_queues(hw);
+		ret = mt76x0_phy_set_channel(dev, &hw->conf.chandef);
+		ieee80211_wake_queues(hw);
+	}
+
+	mutex_unlock(&dev->mutex);
+
+	return ret;
+}
+
+static void
+mt76_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
+		      unsigned int *total_flags, u64 multicast)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	u32 flags = 0;
+
+#define MT76_FILTER(_flag, _hw) do { \
+		flags |= *total_flags & FIF_##_flag;			\
+		dev->rxfilter &= ~(_hw);				\
+		dev->rxfilter |= !(flags & FIF_##_flag) * (_hw);	\
+	} while (0)
+
+	mutex_lock(&dev->mutex);
+
+	dev->rxfilter &= ~MT_RX_FILTR_CFG_OTHER_BSS;
+
+	MT76_FILTER(FCSFAIL, MT_RX_FILTR_CFG_CRC_ERR);
+	MT76_FILTER(PLCPFAIL, MT_RX_FILTR_CFG_PHY_ERR);
+	MT76_FILTER(CONTROL, MT_RX_FILTR_CFG_ACK |
+			     MT_RX_FILTR_CFG_CTS |
+			     MT_RX_FILTR_CFG_CFEND |
+			     MT_RX_FILTR_CFG_CFACK |
+			     MT_RX_FILTR_CFG_BA |
+			     MT_RX_FILTR_CFG_CTRL_RSV);
+	MT76_FILTER(PSPOLL, MT_RX_FILTR_CFG_PSPOLL);
+
+	*total_flags = flags;
+	mt76_wr(dev, MT_RX_FILTR_CFG, dev->rxfilter);
+
+	mutex_unlock(&dev->mutex);
+}
+
+static void
+mt76x0_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			 struct ieee80211_bss_conf *info, u32 changed)
+{
+	struct mt76x0_dev *dev = hw->priv;
+
+	mutex_lock(&dev->mutex);
+
+	if (changed & BSS_CHANGED_ASSOC)
+		mt76x0_phy_con_cal_onoff(dev, info);
+
+	if (changed & BSS_CHANGED_BSSID) {
+		mt76x0_addr_wr(dev, MT_MAC_BSSID_DW0, info->bssid);
+
+		/* Note: this is a hack because beacon_int is not changed
+		 *	 on leave nor is any more appropriate event generated.
+		 *	 rt2x00 doesn't seem to be bothered though.
+		 */
+		if (is_zero_ether_addr(info->bssid))
+			mt76x0_mac_config_tsf(dev, false, 0);
+	}
+
+	if (changed & BSS_CHANGED_BASIC_RATES) {
+		mt76_wr(dev, MT_LEGACY_BASIC_RATE, info->basic_rates);
+		mt76_wr(dev, MT_HT_FBK_CFG0, 0x65432100);
+		mt76_wr(dev, MT_HT_FBK_CFG1, 0xedcba980);
+		mt76_wr(dev, MT_LG_FBK_CFG0, 0xedcba988);
+		mt76_wr(dev, MT_LG_FBK_CFG1, 0x00002100);
+	}
+
+	if (changed & BSS_CHANGED_BEACON_INT)
+		mt76x0_mac_config_tsf(dev, true, info->beacon_int);
+
+	if (changed & BSS_CHANGED_HT || changed & BSS_CHANGED_ERP_CTS_PROT)
+		mt76x0_mac_set_protection(dev, info->use_cts_prot,
+					   info->ht_operation_mode);
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE)
+		mt76x0_mac_set_short_preamble(dev, info->use_short_preamble);
+
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		int slottime = info->use_short_slot ? 9 : 20;
+
+		mt76_rmw_field(dev, MT_BKOFF_SLOT_CFG,
+			       MT_BKOFF_SLOT_CFG_SLOTTIME, slottime);
+	}
+
+	if (changed & BSS_CHANGED_ASSOC)
+		mt76x0_phy_recalibrate_after_assoc(dev);
+
+	mutex_unlock(&dev->mutex);
+}
+
+static int
+mt76x0_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		struct ieee80211_sta *sta)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv;
+	struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv;
+	int ret = 0;
+	int idx = 0;
+
+	mutex_lock(&dev->mutex);
+
+	idx = mt76_wcid_alloc(dev->wcid_mask, ARRAY_SIZE(dev->wcid));
+	if (idx < 0) {
+		ret = -ENOSPC;
+		goto out;
+	}
+
+	msta->wcid.idx = idx;
+	msta->wcid.hw_key_idx = -1;
+	mt76x0_mac_wcid_setup(dev, idx, mvif->idx, sta->addr);
+	mt76_clear(dev, MT_WCID_DROP(idx), MT_WCID_DROP_MASK(idx));
+	rcu_assign_pointer(dev->wcid[idx], &msta->wcid);
+	mt76x0_mac_set_ampdu_factor(dev);
+
+out:
+	mutex_unlock(&dev->mutex);
+
+	return ret;
+}
+
+static int
+mt76x0_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		   struct ieee80211_sta *sta)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv;
+	int idx = msta->wcid.idx;
+
+	mutex_lock(&dev->mutex);
+	rcu_assign_pointer(dev->wcid[idx], NULL);
+	mt76_set(dev, MT_WCID_DROP(idx), MT_WCID_DROP_MASK(idx));
+	dev->wcid_mask[idx / BITS_PER_LONG] &= ~BIT(idx % BITS_PER_LONG);
+	mt76x0_mac_wcid_setup(dev, idx, 0, NULL);
+	mt76x0_mac_set_ampdu_factor(dev);
+	mutex_unlock(&dev->mutex);
+
+	return 0;
+}
+
+static void
+mt76x0_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		   enum sta_notify_cmd cmd, struct ieee80211_sta *sta)
+{
+}
+
+static void
+mt76x0_sw_scan(struct ieee80211_hw *hw,
+		struct ieee80211_vif *vif,
+		const u8 *mac_addr)
+{
+	struct mt76x0_dev *dev = hw->priv;
+
+	cancel_delayed_work_sync(&dev->cal_work);
+	mt76x0_agc_save(dev);
+	set_bit(MT76_SCANNING, &dev->mt76.state);
+}
+
+static void
+mt76x0_sw_scan_complete(struct ieee80211_hw *hw,
+			 struct ieee80211_vif *vif)
+{
+	struct mt76x0_dev *dev = hw->priv;
+
+	mt76x0_agc_restore(dev);
+	clear_bit(MT76_SCANNING, &dev->mt76.state);
+
+	ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
+				     MT_CALIBRATE_INTERVAL);
+}
+
+static int
+mt76x0_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+		struct ieee80211_key_conf *key)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	struct mt76_vif *mvif = (struct mt76_vif *) vif->drv_priv;
+	struct mt76_sta *msta = sta ? (struct mt76_sta *) sta->drv_priv : NULL;
+	struct mt76_wcid *wcid = msta ? &msta->wcid : &mvif->group_wcid;
+	int idx = key->keyidx;
+	int ret;
+
+	if (cmd == SET_KEY) {
+		key->hw_key_idx = wcid->idx;
+		wcid->hw_key_idx = idx;
+	} else {
+		if (idx == wcid->hw_key_idx)
+			wcid->hw_key_idx = -1;
+
+		key = NULL;
+	}
+
+	if (!msta) {
+		if (key || wcid->hw_key_idx == idx) {
+			ret = mt76_mac_wcid_set_key(dev, wcid->idx, key);
+			if (ret)
+				return ret;
+		}
+
+		return mt76_mac_shared_key_setup(dev, mvif->idx, idx, key);
+	}
+
+	return mt76_mac_wcid_set_key(dev, msta->wcid.idx, key);
+}
+
+static int mt76x0_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct mt76x0_dev *dev = hw->priv;
+
+	mt76_rmw_field(dev, MT_TX_RTS_CFG, MT_TX_RTS_CFG_THRESH, value);
+
+	return 0;
+}
+
+static int
+mt76_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		  struct ieee80211_ampdu_params *params)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	struct ieee80211_sta *sta = params->sta;
+	enum ieee80211_ampdu_mlme_action action = params->action;
+	u16 tid = params->tid;
+	u16 *ssn = &params->ssn;
+	struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv;
+
+	WARN_ON(msta->wcid.idx > N_WCIDS);
+
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+		mt76_set(dev, MT_WCID_ADDR(msta->wcid.idx) + 4, BIT(16 + tid));
+		break;
+	case IEEE80211_AMPDU_RX_STOP:
+		mt76_clear(dev, MT_WCID_ADDR(msta->wcid.idx) + 4, BIT(16 + tid));
+		break;
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		ieee80211_send_bar(vif, sta->addr, tid, msta->agg_ssn[tid]);
+		break;
+	case IEEE80211_AMPDU_TX_STOP_FLUSH:
+	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+		break;
+	case IEEE80211_AMPDU_TX_START:
+		msta->agg_ssn[tid] = *ssn << 4;
+		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_STOP_CONT:
+		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+		break;
+	}
+
+	return 0;
+}
+
+static void
+mt76_sta_rate_tbl_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			 struct ieee80211_sta *sta)
+{
+	struct mt76x0_dev *dev = hw->priv;
+	struct mt76_sta *msta = (struct mt76_sta *) sta->drv_priv;
+	struct ieee80211_sta_rates *rates;
+	struct ieee80211_tx_rate rate = {};
+
+	rcu_read_lock();
+	rates = rcu_dereference(sta->rates);
+
+	if (!rates)
+		goto out;
+
+	rate.idx = rates->rate[0].idx;
+	rate.flags = rates->rate[0].flags;
+	mt76_mac_wcid_set_rate(dev, &msta->wcid, &rate);
+
+out:
+	rcu_read_unlock();
+}
+
+const struct ieee80211_ops mt76x0_ops = {
+	.tx = mt76x0_tx,
+	.start = mt76x0_start,
+	.stop = mt76x0_stop,
+	.add_interface = mt76x0_add_interface,
+	.remove_interface = mt76x0_remove_interface,
+	.config = mt76x0_config,
+	.configure_filter = mt76_configure_filter,
+	.bss_info_changed = mt76x0_bss_info_changed,
+	.sta_add = mt76x0_sta_add,
+	.sta_remove = mt76x0_sta_remove,
+	.sta_notify = mt76x0_sta_notify,
+	.set_key = mt76x0_set_key,
+	.conf_tx = mt76x0_conf_tx,
+	.sw_scan_start = mt76x0_sw_scan,
+	.sw_scan_complete = mt76x0_sw_scan_complete,
+	.ampdu_action = mt76_ampdu_action,
+	.sta_rate_tbl_update = mt76_sta_rate_tbl_update,
+	.set_rts_threshold = mt76x0_set_rts_threshold,
+};
-- 
1.9.3

[PATCH v2 12/12] mt76: Kconfig and Makefile for mt76x0 driver

[Stanislaw Gruszka]

Add Kconfig and Makefiles for mt76x0 driver. Now the driver
can be build.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
 drivers/net/wireless/mediatek/mt76/Kconfig         | 7 +++++++
 drivers/net/wireless/mediatek/mt76/Makefile        | 1 +
 drivers/net/wireless/mediatek/mt76/mt76x0/Makefile | 7 +++++++
 3 files changed, 15 insertions(+)
 create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x0/Makefile

diff --git a/drivers/net/wireless/mediatek/mt76/Kconfig b/drivers/net/wireless/mediatek/mt76/Kconfig
index fc05d79c80d0..84854736809a 100644
--- a/drivers/net/wireless/mediatek/mt76/Kconfig
+++ b/drivers/net/wireless/mediatek/mt76/Kconfig
@@ -1,6 +1,13 @@
 config MT76_CORE
 	tristate
 
+config MT76x0U
+	tristate "MediaTek MT76x0U (USB) support"
+	depends on MAC80211
+	depends on USB
+	help
+	  This adds support for MT7610U-based wireless USB dongles.
+
 config MT76x2E
 	tristate "MediaTek MT76x2E (PCIe) support"
 	select MT76_CORE
diff --git a/drivers/net/wireless/mediatek/mt76/Makefile b/drivers/net/wireless/mediatek/mt76/Makefile
index a0156bc01dea..08f93127e9e7 100644
--- a/drivers/net/wireless/mediatek/mt76/Makefile
+++ b/drivers/net/wireless/mediatek/mt76/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_MT76_CORE) += mt76.o
+obj-$(CONFIG_MT76x0U) += mt76x0/
 obj-$(CONFIG_MT76x2E) += mt76x2e.o
 
 mt76-y := \
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/Makefile b/drivers/net/wireless/mediatek/mt76/mt76x0/Makefile
new file mode 100644
index 000000000000..7843908261ba
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_MT76x0U)    += mt76x0.o
+
+mt76x0-objs	= \
+	usb.o init.o main.o mcu.o trace.o dma.o eeprom.o phy.o \
+	mac.o util.o debugfs.o tx.o core.o
+# ccflags-y := -DDEBUG
+CFLAGS_trace.o := -I$(src)
-- 
1.9.3

Re: [PATCH v2 12/12] mt76: Kconfig and Makefile for mt76x0 driver

[kbuild test robot]

Hi Stanislaw,

I love your patch! Perhaps something to improve:

[auto build test WARNING on wireless-drivers-next/master]
[also build test WARNING on v4.18-rc3 next-20180706]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Stanislaw-Gruszka/mt76-add-more-states/20180706-200412
base:   https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git master
reproduce:
        # apt-get install sparse
        make ARCH=x86_64 allmodconfig
        make C=1 CF=-D__CHECK_ENDIAN__


sparse warnings: (new ones prefixed by >>)

>> drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:253:15: sparse: expression using sizeof(void)
>> drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:253:15: sparse: expression using sizeof(void)
   drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:282:15: sparse: expression using sizeof(void)
   drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:282:15: sparse: expression using sizeof(void)
   drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:325:15: sparse: expression using sizeof(void)
   drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:325:15: sparse: expression using sizeof(void)
   drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:354:15: sparse: expression using sizeof(void)
   drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:354:15: sparse: expression using sizeof(void)
>> drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:344:5: sparse: symbol 'mt76x0_burst_read_regs' was not declared. Should it be static?
   drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c:463:13: sparse: expression using sizeof(void)
--
>> drivers/net/wireless/mediatek/mt76/mt76x0/eeprom.c:88:27: sparse: Variable length array is used.
--
>> drivers/net/wireless/mediatek/mt76/mt76x0/phy.c:969:34: sparse: expression using sizeof(void)
>> drivers/net/wireless/mediatek/mt76/mt76x0/phy.c:989:6: sparse: symbol 'mt76x0_ant_select' was not declared. Should it be static?
--
>> drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:88:21: sparse: expression using sizeof(void)
   drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:97:31: sparse: expression using sizeof(void)
>> drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:166:16: sparse: incorrect type in return expression (different base types) @@    expected unsigned short @@    got restricted __leunsigned short @@
   drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:166:16:    expected unsigned short
   drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:166:16:    got restricted __le16 [usertype] <noident>
>> drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:175:23: sparse: incorrect type in assignment (different base types) @@    expected restricted __le16 [usertype] tx_rate @@    got 16 [usertype] tx_rate @@
   drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:175:23:    expected restricted __le16 [usertype] tx_rate
   drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:175:23:    got unsigned short
   drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:438:30: sparse: expression using sizeof(void)
   drivers/net/wireless/mediatek/mt76/mt76x0/mac.c:438:30: sparse: expression using sizeof(void)
--
>> drivers/net/wireless/mediatek/mt76/mt76x0/tx.c:93:26: sparse: incorrect type in assignment (different base types) @@    expected unsigned short [unsigned] [usertype] rate_ctl @@    got  short [unsigned] [usertype] rate_ctl @@
   drivers/net/wireless/mediatek/mt76/mt76x0/tx.c:93:26:    expected unsigned short [unsigned] [usertype] rate_ctl
   drivers/net/wireless/mediatek/mt76/mt76x0/tx.c:93:26:    got restricted __le16 [usertype] tx_rate
>> drivers/net/wireless/mediatek/mt76/mt76x0/tx.c:126:27: sparse: expression using sizeof(void)

Please review and possibly fold the followup patch.

vim +253 drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c

9b00fd07 Stanislaw Gruszka 2018-07-06  242  
9b00fd07 Stanislaw Gruszka 2018-07-06  243  int mt76x0_write_reg_pairs(struct mt76x0_dev *dev, u32 base,
9b00fd07 Stanislaw Gruszka 2018-07-06  244  			   const struct mt76_reg_pair *data, int n)
9b00fd07 Stanislaw Gruszka 2018-07-06  245  {
9b00fd07 Stanislaw Gruszka 2018-07-06  246  	const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 8;
9b00fd07 Stanislaw Gruszka 2018-07-06  247  	struct sk_buff *skb;
9b00fd07 Stanislaw Gruszka 2018-07-06  248  	int cnt, i, ret;
9b00fd07 Stanislaw Gruszka 2018-07-06  249  
9b00fd07 Stanislaw Gruszka 2018-07-06  250  	if (!n)
9b00fd07 Stanislaw Gruszka 2018-07-06  251  		return 0;
9b00fd07 Stanislaw Gruszka 2018-07-06  252  
9b00fd07 Stanislaw Gruszka 2018-07-06 @253  	cnt = min(max_vals_per_cmd, n);
9b00fd07 Stanislaw Gruszka 2018-07-06  254  
9b00fd07 Stanislaw Gruszka 2018-07-06  255  	skb = alloc_skb(cnt * 8 + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
9b00fd07 Stanislaw Gruszka 2018-07-06  256  	if (!skb)
9b00fd07 Stanislaw Gruszka 2018-07-06  257  		return -ENOMEM;
9b00fd07 Stanislaw Gruszka 2018-07-06  258  	skb_reserve(skb, MT_DMA_HDR_LEN);
9b00fd07 Stanislaw Gruszka 2018-07-06  259  
9b00fd07 Stanislaw Gruszka 2018-07-06  260  	for (i = 0; i < cnt; i++) {
9b00fd07 Stanislaw Gruszka 2018-07-06  261  		skb_put_le32(skb, base + data[i].reg);
9b00fd07 Stanislaw Gruszka 2018-07-06  262  		skb_put_le32(skb, data[i].value);
9b00fd07 Stanislaw Gruszka 2018-07-06  263  	}
9b00fd07 Stanislaw Gruszka 2018-07-06  264  
9b00fd07 Stanislaw Gruszka 2018-07-06  265  	ret = mt76x0_mcu_msg_send(dev, skb, CMD_RANDOM_WRITE, cnt == n);
9b00fd07 Stanislaw Gruszka 2018-07-06  266  	if (ret)
9b00fd07 Stanislaw Gruszka 2018-07-06  267  		return ret;
9b00fd07 Stanislaw Gruszka 2018-07-06  268  
9b00fd07 Stanislaw Gruszka 2018-07-06  269  	return mt76x0_write_reg_pairs(dev, base, data + cnt, n - cnt);
9b00fd07 Stanislaw Gruszka 2018-07-06  270  }
9b00fd07 Stanislaw Gruszka 2018-07-06  271  
9b00fd07 Stanislaw Gruszka 2018-07-06  272  int mt76x0_read_reg_pairs(struct mt76x0_dev *dev, u32 base,
9b00fd07 Stanislaw Gruszka 2018-07-06  273  			  struct mt76_reg_pair *data, int n)
9b00fd07 Stanislaw Gruszka 2018-07-06  274  {
9b00fd07 Stanislaw Gruszka 2018-07-06  275  	const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 8;
9b00fd07 Stanislaw Gruszka 2018-07-06  276  	struct sk_buff *skb;
9b00fd07 Stanislaw Gruszka 2018-07-06  277  	int cnt, i, ret;
9b00fd07 Stanislaw Gruszka 2018-07-06  278  
9b00fd07 Stanislaw Gruszka 2018-07-06  279  	if (!n)
9b00fd07 Stanislaw Gruszka 2018-07-06  280  		return 0;
9b00fd07 Stanislaw Gruszka 2018-07-06  281  
9b00fd07 Stanislaw Gruszka 2018-07-06  282  	cnt = min(max_vals_per_cmd, n);
9b00fd07 Stanislaw Gruszka 2018-07-06  283  	if (cnt != n)
9b00fd07 Stanislaw Gruszka 2018-07-06  284  		return -EINVAL;
9b00fd07 Stanislaw Gruszka 2018-07-06  285  
9b00fd07 Stanislaw Gruszka 2018-07-06  286  	skb = alloc_skb(cnt * 8 + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
9b00fd07 Stanislaw Gruszka 2018-07-06  287  	if (!skb)
9b00fd07 Stanislaw Gruszka 2018-07-06  288  		return -ENOMEM;
9b00fd07 Stanislaw Gruszka 2018-07-06  289  	skb_reserve(skb, MT_DMA_HDR_LEN);
9b00fd07 Stanislaw Gruszka 2018-07-06  290  
9b00fd07 Stanislaw Gruszka 2018-07-06  291  	for (i = 0; i < cnt; i++) {
9b00fd07 Stanislaw Gruszka 2018-07-06  292  		skb_put_le32(skb, base + data[i].reg);
9b00fd07 Stanislaw Gruszka 2018-07-06  293  		skb_put_le32(skb, data[i].value);
9b00fd07 Stanislaw Gruszka 2018-07-06  294  	}
9b00fd07 Stanislaw Gruszka 2018-07-06  295  
9b00fd07 Stanislaw Gruszka 2018-07-06  296  	mutex_lock(&dev->mcu.mutex);
9b00fd07 Stanislaw Gruszka 2018-07-06  297  
9b00fd07 Stanislaw Gruszka 2018-07-06  298  	dev->mcu.reg_pairs = data;
9b00fd07 Stanislaw Gruszka 2018-07-06  299  	dev->mcu.reg_pairs_len = n;
9b00fd07 Stanislaw Gruszka 2018-07-06  300  	dev->mcu.reg_base = base;
9b00fd07 Stanislaw Gruszka 2018-07-06  301  	dev->mcu.burst_read = false;
9b00fd07 Stanislaw Gruszka 2018-07-06  302  
9b00fd07 Stanislaw Gruszka 2018-07-06  303  	ret = __mt76x0_mcu_msg_send(dev, skb, CMD_RANDOM_READ, true);
9b00fd07 Stanislaw Gruszka 2018-07-06  304  
9b00fd07 Stanislaw Gruszka 2018-07-06  305  	dev->mcu.reg_pairs = NULL;
9b00fd07 Stanislaw Gruszka 2018-07-06  306  
9b00fd07 Stanislaw Gruszka 2018-07-06  307  	mutex_unlock(&dev->mcu.mutex);
9b00fd07 Stanislaw Gruszka 2018-07-06  308  
9b00fd07 Stanislaw Gruszka 2018-07-06  309  	consume_skb(skb);
9b00fd07 Stanislaw Gruszka 2018-07-06  310  
9b00fd07 Stanislaw Gruszka 2018-07-06  311  	return ret;
9b00fd07 Stanislaw Gruszka 2018-07-06  312  
9b00fd07 Stanislaw Gruszka 2018-07-06  313  }
9b00fd07 Stanislaw Gruszka 2018-07-06  314  
9b00fd07 Stanislaw Gruszka 2018-07-06  315  int mt76x0_burst_write_regs(struct mt76x0_dev *dev, u32 offset,
9b00fd07 Stanislaw Gruszka 2018-07-06  316  			     const u32 *data, int n)
9b00fd07 Stanislaw Gruszka 2018-07-06  317  {
9b00fd07 Stanislaw Gruszka 2018-07-06  318  	const int max_regs_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1;
9b00fd07 Stanislaw Gruszka 2018-07-06  319  	struct sk_buff *skb;
9b00fd07 Stanislaw Gruszka 2018-07-06  320  	int cnt, i, ret;
9b00fd07 Stanislaw Gruszka 2018-07-06  321  
9b00fd07 Stanislaw Gruszka 2018-07-06  322  	if (!n)
9b00fd07 Stanislaw Gruszka 2018-07-06  323  		return 0;
9b00fd07 Stanislaw Gruszka 2018-07-06  324  
9b00fd07 Stanislaw Gruszka 2018-07-06  325  	cnt = min(max_regs_per_cmd, n);
9b00fd07 Stanislaw Gruszka 2018-07-06  326  
9b00fd07 Stanislaw Gruszka 2018-07-06  327  	skb = alloc_skb(cnt * 4 + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
9b00fd07 Stanislaw Gruszka 2018-07-06  328  	if (!skb)
9b00fd07 Stanislaw Gruszka 2018-07-06  329  		return -ENOMEM;
9b00fd07 Stanislaw Gruszka 2018-07-06  330  	skb_reserve(skb, MT_DMA_HDR_LEN);
9b00fd07 Stanislaw Gruszka 2018-07-06  331  
9b00fd07 Stanislaw Gruszka 2018-07-06  332  	skb_put_le32(skb, MT_MCU_MEMMAP_WLAN + offset);
9b00fd07 Stanislaw Gruszka 2018-07-06  333  	for (i = 0; i < cnt; i++)
9b00fd07 Stanislaw Gruszka 2018-07-06  334  		skb_put_le32(skb, data[i]);
9b00fd07 Stanislaw Gruszka 2018-07-06  335  
9b00fd07 Stanislaw Gruszka 2018-07-06  336  	ret = mt76x0_mcu_msg_send(dev, skb, CMD_BURST_WRITE, cnt == n);
9b00fd07 Stanislaw Gruszka 2018-07-06  337  	if (ret)
9b00fd07 Stanislaw Gruszka 2018-07-06  338  		return ret;
9b00fd07 Stanislaw Gruszka 2018-07-06  339  
9b00fd07 Stanislaw Gruszka 2018-07-06  340  	return mt76x0_burst_write_regs(dev, offset + cnt * 4,
9b00fd07 Stanislaw Gruszka 2018-07-06  341  					data + cnt, n - cnt);
9b00fd07 Stanislaw Gruszka 2018-07-06  342  }
9b00fd07 Stanislaw Gruszka 2018-07-06  343  
9b00fd07 Stanislaw Gruszka 2018-07-06 @344  int mt76x0_burst_read_regs(struct mt76x0_dev *dev, u32 base,
9b00fd07 Stanislaw Gruszka 2018-07-06  345  			   struct mt76_reg_pair *data, int n)
9b00fd07 Stanislaw Gruszka 2018-07-06  346  {
9b00fd07 Stanislaw Gruszka 2018-07-06  347  	const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1;
9b00fd07 Stanislaw Gruszka 2018-07-06  348  	struct sk_buff *skb;
9b00fd07 Stanislaw Gruszka 2018-07-06  349  	int cnt, ret;
9b00fd07 Stanislaw Gruszka 2018-07-06  350  
9b00fd07 Stanislaw Gruszka 2018-07-06  351  	if (!n)
9b00fd07 Stanislaw Gruszka 2018-07-06  352  		return 0;
9b00fd07 Stanislaw Gruszka 2018-07-06  353  
9b00fd07 Stanislaw Gruszka 2018-07-06  354  	cnt = min(max_vals_per_cmd, n);
9b00fd07 Stanislaw Gruszka 2018-07-06  355  	if (cnt != n)
9b00fd07 Stanislaw Gruszka 2018-07-06  356  		return -EINVAL;
9b00fd07 Stanislaw Gruszka 2018-07-06  357  
9b00fd07 Stanislaw Gruszka 2018-07-06  358  	skb = alloc_skb(cnt * 4 + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
9b00fd07 Stanislaw Gruszka 2018-07-06  359  	if (!skb)
9b00fd07 Stanislaw Gruszka 2018-07-06  360  		return -ENOMEM;
9b00fd07 Stanislaw Gruszka 2018-07-06  361  	skb_reserve(skb, MT_DMA_HDR_LEN);
9b00fd07 Stanislaw Gruszka 2018-07-06  362  
9b00fd07 Stanislaw Gruszka 2018-07-06  363  	skb_put_le32(skb, base + data[0].reg);
9b00fd07 Stanislaw Gruszka 2018-07-06  364  	skb_put_le32(skb, n);
9b00fd07 Stanislaw Gruszka 2018-07-06  365  
9b00fd07 Stanislaw Gruszka 2018-07-06  366  	mutex_lock(&dev->mcu.mutex);
9b00fd07 Stanislaw Gruszka 2018-07-06  367  
9b00fd07 Stanislaw Gruszka 2018-07-06  368  	dev->mcu.reg_pairs = data;
9b00fd07 Stanislaw Gruszka 2018-07-06  369  	dev->mcu.reg_pairs_len = n;
9b00fd07 Stanislaw Gruszka 2018-07-06  370  	dev->mcu.reg_base = base;
9b00fd07 Stanislaw Gruszka 2018-07-06  371  	dev->mcu.burst_read = true;
9b00fd07 Stanislaw Gruszka 2018-07-06  372  
9b00fd07 Stanislaw Gruszka 2018-07-06  373  	ret = __mt76x0_mcu_msg_send(dev, skb, CMD_BURST_READ, true);
9b00fd07 Stanislaw Gruszka 2018-07-06  374  
9b00fd07 Stanislaw Gruszka 2018-07-06  375  	dev->mcu.reg_pairs = NULL;
9b00fd07 Stanislaw Gruszka 2018-07-06  376  
9b00fd07 Stanislaw Gruszka 2018-07-06  377  	mutex_unlock(&dev->mcu.mutex);
9b00fd07 Stanislaw Gruszka 2018-07-06  378  
9b00fd07 Stanislaw Gruszka 2018-07-06  379  	consume_skb(skb);
9b00fd07 Stanislaw Gruszka 2018-07-06  380  
9b00fd07 Stanislaw Gruszka 2018-07-06  381  	return ret;
9b00fd07 Stanislaw Gruszka 2018-07-06  382  }
9b00fd07 Stanislaw Gruszka 2018-07-06  383  

:::::: The code at line 253 was first introduced by commit
:::::: 9b00fd07b938453189c6be7d366c71bc7528f7ce mt76x0: mcu files

:::::: TO: Stanislaw Gruszka <sgruszka@redhat.com>
:::::: CC: 0day robot <lkp@intel.com>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[RFC PATCH] mt76: mt76x0_burst_read_regs() can be static

[kbuild test robot]

Fixes: c1f1ff1a3d63 ("mt76: Kconfig and Makefile for mt76x0 driver")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
---
 mcu.c |    4 ++--
 phy.c |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c
index aafa3f3..0c9da79 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.c
@@ -341,8 +341,8 @@ int mt76x0_burst_write_regs(struct mt76x0_dev *dev, u32 offset,
 					data + cnt, n - cnt);
 }
 
-int mt76x0_burst_read_regs(struct mt76x0_dev *dev, u32 base,
-			   struct mt76_reg_pair *data, int n)
+static int mt76x0_burst_read_regs(struct mt76x0_dev *dev, u32 base,
+				  struct mt76_reg_pair *data, int n)
 {
 	const int max_vals_per_cmd = INBAND_PACKET_MAX_LEN / 4 - 1;
 	struct sk_buff *skb;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
index 0830280..e52a506 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c
@@ -986,7 +986,7 @@ mt76x0_rf_init(struct mt76x0_dev *dev)
 	rf_set(dev, MT_RF(0, 4), 0x80);
 }
 
-void mt76x0_ant_select(struct mt76x0_dev *dev)
+static void mt76x0_ant_select(struct mt76x0_dev *dev)
 {
 	/* Single antenna mode. */
 	mt76_rmw(dev, MT_WLAN_FUN_CTRL, BIT(5), BIT(6));

Re: [PATCH v2 00/12] Add mt76x0 driver

[Lorenzo Bianconi]

> On Tue, 2018-07-10 at 11:52 +0200, Stanislaw Gruszka wrote:
> > On Tue, Jul 10, 2018 at 02:50:30PM +0800, Sean Wang wrote:
> > > > For full support mt7610.bin firmware blob is need, hopefully with 
> > > > the permission of Mediatek, the blob will be pushed into linux-firmware
> > > > git tree.
> > > > 
> > > 
> > > Hi, Stanislaw
> > > 
> > > You can feel free to add mt7610.bin firmware blob to linux-firmware with
> > > the license LICENCE.mediatek I added in [1].
> > > 
> > > 
> > > [1]
> > > http://lists.infradead.org/pipermail/linux-mediatek/2018-June/013759.html
> > 
> > Thank you Sean!
> > 
> > I guess there is no problem with similar submission for
> > mt7662u.bin and mt7662u_rom_patch.bin needed for mt76x2u:
> > https://marc.info/?l=linux-wireless&m=153045438821562&w=2
> > 
> 

Thanks Sean,

I will submit mt7662u.bin and mt7662u_rom_patch.bin with LICENCE.mediatek
soon

> Sure, there is no any problem for submitting mt7662u.bin and
> mt7662u_rom_patch.bin if they are added with LICENCE.mediatek.
> 
> Do you or Lorenzo have a plan to add MT7668u support to mt76?
> MT7668 is a newer wifi device than MT7610u or MT7662u.
> 

Cool, I am interested in adding MT7668u support to mt76 driver.
Is the adapter available on the market?

Regards,
Lorenzo

> > Regards
> > Stanislaw
> > 
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> 
> 

Re: [PATCH v2 00/12] Add mt76x0 driver

[Stanislaw Gruszka]

Hi all,

On Wed, Jul 11, 2018 at 10:07:25AM +0200, Lorenzo Bianconi wrote:
> > On Tue, 2018-07-10 at 11:52 +0200, Stanislaw Gruszka wrote:
> > > On Tue, Jul 10, 2018 at 02:50:30PM +0800, Sean Wang wrote:
> > > > > For full support mt7610.bin firmware blob is need, hopefully with 
> > > > > the permission of Mediatek, the blob will be pushed into linux-firmware
> > > > > git tree.
> > > > > 
> > > > 
> > > > Hi, Stanislaw
> > > > 
> > > > You can feel free to add mt7610.bin firmware blob to linux-firmware with
> > > > the license LICENCE.mediatek I added in [1].
> > > > 
> > > > 
> > > > [1]
> > > > http://lists.infradead.org/pipermail/linux-mediatek/2018-June/013759.html
> > > 
> > > Thank you Sean!
> > > 
> > > I guess there is no problem with similar submission for
> > > mt7662u.bin and mt7662u_rom_patch.bin needed for mt76x2u:
> > > https://marc.info/?l=linux-wireless&m=153045438821562&w=2
> > > 
> > 
> 
> Thanks Sean,
> 
> I will submit mt7662u.bin and mt7662u_rom_patch.bin with LICENCE.mediatek
> soon
> 
> > Sure, there is no any problem for submitting mt7662u.bin and
> > mt7662u_rom_patch.bin if they are added with LICENCE.mediatek.
> > 
> > Do you or Lorenzo have a plan to add MT7668u support to mt76?
> > MT7668 is a newer wifi device than MT7610u or MT7662u.

>From my side I haven't yet planed to support this chip, but I consider
to help working on that after finish work I currently planed to do (i.e.
support for older MT7630E, MT7610E chips).

Ultimate goal would be having you guys @Mediatek supporting your
wifi chips in the mineline, similarly like you do for other
hardware :-) I hope making mt76 more generic by adding new chips
support, hence make easier to do that in the future, will
convince you to support mainline instead of working on your of
the tree driver. Obviously there are pros and cons of that approach
and you might have good reasons not to do that too.
 
> Cool, I am interested in adding MT7668u support to mt76 driver.
> Is the adapter available on the market?

According to https://wikidevi.com/wiki/MediaTek only 4 non-standard
devices were provided with the MT7668u chip so far. I guess is hard for
the chip vendor to say how popular will particular product be by OEMs.

Thanks
Stanislaw

Re: [PATCH v2 00/12] Add mt76x0 driver

[Sean Wang]

On Wed, 2018-07-11 at 10:07 +0200, Lorenzo Bianconi wrote:
> > On Tue, 2018-07-10 at 11:52 +0200, Stanislaw Gruszka wrote:
> > > On Tue, Jul 10, 2018 at 02:50:30PM +0800, Sean Wang wrote:
> > > > > For full support mt7610.bin firmware blob is need, hopefully with 
> > > > > the permission of Mediatek, the blob will be pushed into linux-firmware
> > > > > git tree.
> > > > > 
> > > > 
> > > > Hi, Stanislaw
> > > > 
> > > > You can feel free to add mt7610.bin firmware blob to linux-firmware with
> > > > the license LICENCE.mediatek I added in [1].
> > > > 
> > > > 
> > > > [1]
> > > > http://lists.infradead.org/pipermail/linux-mediatek/2018-June/013759.html
> > > 
> > > Thank you Sean!
> > > 
> > > I guess there is no problem with similar submission for
> > > mt7662u.bin and mt7662u_rom_patch.bin needed for mt76x2u:
> > > https://marc.info/?l=linux-wireless&m=153045438821562&w=2
> > > 
> > 
> 
> Thanks Sean,
> 
> I will submit mt7662u.bin and mt7662u_rom_patch.bin with LICENCE.mediatek
> soon
> 
> > Sure, there is no any problem for submitting mt7662u.bin and
> > mt7662u_rom_patch.bin if they are added with LICENCE.mediatek.
> > 
> > Do you or Lorenzo have a plan to add MT7668u support to mt76?
> > MT7668 is a newer wifi device than MT7610u or MT7662u.
> > 
> 
> Cool, I am interested in adding MT7668u support to mt76 driver.
> Is the adapter available on the market?

I'm not sure if it can be got from the market easily.

I would like to say, mt7668 is based on new MTK wifi architecture. as
for mt7662/mt7612/mt7610, they all belong to legacy Ralink based design.
of course, we will never see any new chip based on Ralink based design
wifi in the future.

There must be really lots of differences exist between two types of
devices, such as MCU firmware download, MCU control interface, tx/rx
path, even hardware register layout all changed and so on.

I guess the hardware abstraction layer needs to be largely adjusted to
add the new device mt7668u into mt76 driver. And even I think it would
be easier for development and maintenance if we make a separate driver
and then pick up some pure software components from mt76 to reuse.

Maybe it's the time I want to test your tree first with 7612u (?) or
mt7610u (?) , what is suggested? and see how big the gap between this
two type of devices and last write some code based on your tree to test
mt7668u

	Sean

> Regards,
> Lorenzo
> 
> > > Regards
> > > Stanislaw
> > > 
> > > _______________________________________________
> > > Linux-mediatek mailing list
> > > Linux-mediatek@lists.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> > 
> > 

Re: [PATCH v2 00/12] Add mt76x0 driver

[Lorenzo Bianconi]

>
> On Wed, 2018-07-11 at 10:07 +0200, Lorenzo Bianconi wrote:
> > > On Tue, 2018-07-10 at 11:52 +0200, Stanislaw Gruszka wrote:
> > > > On Tue, Jul 10, 2018 at 02:50:30PM +0800, Sean Wang wrote:
> > > > > > For full support mt7610.bin firmware blob is need, hopefully with
> > > > > > the permission of Mediatek, the blob will be pushed into linux-firmware
> > > > > > git tree.
> > > > > >
> > > > >
> > > > > Hi, Stanislaw
> > > > >
> > > > > You can feel free to add mt7610.bin firmware blob to linux-firmware with
> > > > > the license LICENCE.mediatek I added in [1].
> > > > >
> > > > >
> > > > > [1]
> > > > > http://lists.infradead.org/pipermail/linux-mediatek/2018-June/013759.html
> > > >
> > > > Thank you Sean!
> > > >
> > > > I guess there is no problem with similar submission for
> > > > mt7662u.bin and mt7662u_rom_patch.bin needed for mt76x2u:
> > > > https://marc.info/?l=linux-wireless&m=153045438821562&w=2
> > > >
> > >
> >
> > Thanks Sean,
> >
> > I will submit mt7662u.bin and mt7662u_rom_patch.bin with LICENCE.mediatek
> > soon
> >
> > > Sure, there is no any problem for submitting mt7662u.bin and
> > > mt7662u_rom_patch.bin if they are added with LICENCE.mediatek.
> > >
> > > Do you or Lorenzo have a plan to add MT7668u support to mt76?
> > > MT7668 is a newer wifi device than MT7610u or MT7662u.
> > >
> >
> > Cool, I am interested in adding MT7668u support to mt76 driver.
> > Is the adapter available on the market?
>
> I'm not sure if it can be got from the market easily.
>
> I would like to say, mt7668 is based on new MTK wifi architecture. as
> for mt7662/mt7612/mt7610, they all belong to legacy Ralink based design.
> of course, we will never see any new chip based on Ralink based design
> wifi in the future.
>
> There must be really lots of differences exist between two types of
> devices, such as MCU firmware download, MCU control interface, tx/rx
> path, even hardware register layout all changed and so on.
>
> I guess the hardware abstraction layer needs to be largely adjusted to
> add the new device mt7668u into mt76 driver. And even I think it would
> be easier for development and maintenance if we make a separate driver
> and then pick up some pure software components from mt76 to reuse.
>

the mt76 driver has a hw independent layer (mt76/mt76-usb modules) that
implements data path (tx/rx side), mac80211 integration and calls hw dependent
code for hw initialization (that approach allows to support mt76x2 and mt7603
chipsets in the same driver).
I guess it will be feasible (at least in theory) to integrate mt7668
support in the
mt76 driver (but I can't be more precise since I have no any reference code or
hw to test)

> Maybe it's the time I want to test your tree first with 7612u (?) or
> mt7610u (?) , what is suggested? and see how big the gap between this
> two type of devices and last write some code based on your tree to test
> mt7668u

mt76x2u and mt76x0 are not merged yet, but I would suggest to start looking
at mt76x2u since it is already integrated in the mt76 driver while
mt76x0 is a standalone
driver for the moment.

@Stanislaw what do you think?

Regards,
Lorenzo

>
>         Sean
>
> > Regards,
> > Lorenzo
> >
> > > > Regards
> > > > Stanislaw
> > > >
> > > > _______________________________________________
> > > > Linux-mediatek mailing list
> > > > Linux-mediatek@lists.infradead.org
> > > > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> > >
> > >
>
>

Re: [PATCH v2 00/12] Add mt76x0 driver

[Stanislaw Gruszka]

Hi

On Mon, Jul 23, 2018 at 11:16:25AM +0200, Lorenzo Bianconi wrote:
> > I'm not sure if it can be got from the market easily.
> >
> > I would like to say, mt7668 is based on new MTK wifi architecture. as
> > for mt7662/mt7612/mt7610, they all belong to legacy Ralink based design.
> > of course, we will never see any new chip based on Ralink based design
> > wifi in the future.
> >
> > There must be really lots of differences exist between two types of
> > devices, such as MCU firmware download, MCU control interface, tx/rx
> > path, even hardware register layout all changed and so on.
> >
> > I guess the hardware abstraction layer needs to be largely adjusted to
> > add the new device mt7668u into mt76 driver. And even I think it would
> > be easier for development and maintenance if we make a separate driver
> > and then pick up some pure software components from mt76 to reuse.
> >
> 
> the mt76 driver has a hw independent layer (mt76/mt76-usb modules) that
> implements data path (tx/rx side), mac80211 integration and calls hw dependent
> code for hw initialization (that approach allows to support mt76x2 and mt7603
> chipsets in the same driver).
> I guess it will be feasible (at least in theory) to integrate mt7668
> support in the
> mt76 driver (but I can't be more precise since I have no any reference code or
> hw to test)
> 
> > Maybe it's the time I want to test your tree first with 7612u (?) or
> > mt7610u (?) , what is suggested? and see how big the gap between this
> > two type of devices and last write some code based on your tree to test
> > mt7668u
> 
> mt76x2u and mt76x0 are not merged yet, but I would suggest to start looking
> at mt76x2u since it is already integrated in the mt76 driver while
> mt76x0 is a standalone
> driver for the moment.
> 
> @Stanislaw what do you think?

I think checking common mt76-usb layer for possibility to add
support for new MT7688U chip on top of it is reasonable :-)

Thanks
Stanislaw

Re: [PATCH v2 00/12] Add mt76x0 driver

[Stanislaw Gruszka]

Hello,

On Fri, Jul 20, 2018 at 11:36:34PM +0800, Sean Wang wrote:
> > > Sure, there is no any problem for submitting mt7662u.bin and
> > > mt7662u_rom_patch.bin if they are added with LICENCE.mediatek.
> > > 
> > > Do you or Lorenzo have a plan to add MT7668u support to mt76?
> > > MT7668 is a newer wifi device than MT7610u or MT7662u.
> > > 
> > 
> > Cool, I am interested in adding MT7668u support to mt76 driver.
> > Is the adapter available on the market?
> 
> I'm not sure if it can be got from the market easily.
> 
> I would like to say, mt7668 is based on new MTK wifi architecture. as
> for mt7662/mt7612/mt7610, they all belong to legacy Ralink based design.
> of course, we will never see any new chip based on Ralink based design
> wifi in the future.
> 
> There must be really lots of differences exist between two types of
> devices, such as MCU firmware download, MCU control interface, tx/rx
> path, even hardware register layout all changed and so on.
> 
> I guess the hardware abstraction layer needs to be largely adjusted to
> add the new device mt7668u into mt76 driver. And even I think it would
> be easier for development and maintenance if we make a separate driver
> and then pick up some pure software components from mt76 to reuse.

It could be the case that it's better to develop separate mac80211 driver
for this new chip than to integrate it into mt76. FWIW few years back
there was failed efforts to add MT7630 devices into venerable rt2x00
driver and Felix Fietkau decision to develop new mt76 driver proved that
this is better approach (though MT7620 is still supported via rt2x00
driver, but IMHO would be much better to have it as part of mt76).

As usual the devil is in the detail. We have not yet unstreamed Felix'
mt7603 driver which is part of mt76 in github tree;
https://github.com/openwrt/mt76 
I was not aware of that before, but according to description it also
supports MT7688 ? ( PCIe version ?). However, for what I can tell,
overlap between mt76x2 and mt7603 is very small and make mt7603 a
separate driver it drivers/net/wireless/mediatek/ could be a better
decision.
 
> Maybe it's the time I want to test your tree first with 7612u (?) or
> mt7610u (?) , what is suggested? and see how big the gap between this
> two type of devices and last write some code based on your tree to test
> mt7668u

Both 7610u and 7612u should be supported in my development
mt76x0-draft-v2 branch, which add mt76x0 on top of Lorenzo mt76x2u:
https://github.com/sgruszka/wireless-drivers-next/commits/mt76x0-draft-v2
so you can test that if you want to :-)

Thanks
Stanislaw