From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mga03.intel.com ([134.134.136.65]:9028 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389266AbeG0WHO (ORCPT ); Fri, 27 Jul 2018 18:07:14 -0400 From: Andy Shevchenko To: Stanislaw Gruszka , Helmut Schaa , linux-wireless@vger.kernel.org, Bjorn Helgaas , linux-pci@vger.kernel.org Cc: Andy Shevchenko Subject: [PATCH v2] PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry Date: Fri, 27 Jul 2018 23:43:37 +0300 Message-Id: <20180727204337.60767-1-andriy.shevchenko@linux.intel.com> (sfid-20180727_224343_455680_F8A46AC9) Sender: linux-wireless-owner@vger.kernel.org List-ID: There are a lot of examples in the kernel where PCI_VDEVICE() is used and still looks not so convenient due to additional driver_data field attached. Introduce PCI_DEVICE_DATA() macro to fully describe device ID entry in shortest possible form. For example, before: { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_mrfld_properties, }, after: { PCI_VDEVICE(INTEL, INTEL_MRFLD, &dwc3_pci_mrfld_properties }, Drivers can be converted later on in independent way. While here, remove the unused macro with the same name from Ralink wireless driver. Signed-off-by: Andy Shevchenko --- drivers/net/wireless/ralink/rt2x00/rt2x00pci.h | 6 ------ include/linux/pci.h | 15 +++++++++++++++ 2 files changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h index bc0ca5f58f38..283e2e607bba 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00pci.h @@ -27,12 +27,6 @@ #include #include -/* - * This variable should be used with the - * pci_driver structure initialization. - */ -#define PCI_DEVICE_DATA(__ops) .driver_data = (kernel_ulong_t)(__ops) - /* * PCI driver handlers. */ diff --git a/include/linux/pci.h b/include/linux/pci.h index d0961aefdbae..754da6f9adb3 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -825,6 +825,21 @@ struct pci_driver { .vendor = PCI_VENDOR_ID_##vend, .device = (dev), \ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0 +/** + * PCI_DEVICE_DATA - macro used to describe a specific PCI device in very short form + * @vend: the vendor name (without PCI_VENDOR_ID_ prefix) + * @dev: the device name (without PCI_DEVICE_ID_ prefix) + * @data: the driver data to be filled + * + * This macro is used to create a struct pci_device_id that matches a + * specific PCI device. The subvendor, and subdevice fields will be set + * to PCI_ANY_ID. + */ +#define PCI_DEVICE_DATA(vend, dev, data) \ + .vendor = PCI_VENDOR_ID_##vend, .device = PCI_DEVICE_ID_##dev, \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0, \ + .driver_data = (kernel_ulong_t)(data) + enum { PCI_REASSIGN_ALL_RSRC = 0x00000001, /* Ignore firmware setup */ PCI_REASSIGN_ALL_BUS = 0x00000002, /* Reassign all bus numbers */ -- 2.18.0