From: Brian Norris <briannorris@chromium.org>
To: Govind Singh <govinds@codeaurora.org>
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
andy.gross@linaro.org, ath10k@lists.infradead.org,
linux-wireless@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org
Subject: Re: [PATCH v2 2/4] dts: arm64/sdm845: Add WCN3990 WLAN module device node
Date: Mon, 8 Oct 2018 12:44:23 -0700 [thread overview]
Message-ID: <20181008194422.GA124443@ban.mtv.corp.google.com> (raw)
In-Reply-To: <20181001112636.31715-3-govinds@codeaurora.org>
+ linux-msm, linux-soc
Hi Govind,
On Mon, Oct 01, 2018 at 04:56:34PM +0530, Govind Singh wrote:
> Add device node for the ath10k SNOC platform driver probe
> and add resources required for WCN3990 on SDM845 soc.
>
> Signed-off-by: Govind Singh <govinds@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 7 +++++++
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 +++++++++++++++++++++++++
> 2 files changed, 33 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> index eedfaf8922e2..4de57f7df93c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> @@ -440,3 +440,10 @@
> bias-pull-up;
> };
> };
> +
> +&wifi {
You missed overriding 'status':
status = "okay";
Also, I think pinctrl overrides are purposely kept separate from other
node modifications here (see the /* PINCTRL - ... */ comment header). So
&wifi should probably be just after the &usb_2_qmpphy override I
currently see in linux-next.
Brian
> + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
> + vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
> + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
> + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index e080072cdfdb..36c716cf3a0c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -86,6 +86,11 @@
> reg = <0 0x86200000 0 0x2d00000>;
> no-map;
> };
> +
> + wlan_msa_mem: reserved-memory@96700000 {
> + no-map;
> + reg = <0 0x96700000 0 0x100000>;
> + };
> };
>
> cpus {
> @@ -1200,5 +1205,26 @@
> status = "disabled";
> };
> };
> +
> + wifi: wifi@18800000 {
> + compatible = "qcom,wcn3990-wifi";
> + status = "disabled";
> + reg = <0x18800000 0x800000>;
> + reg-names = "membase";
> + memory-region = <&wlan_msa_mem>;
> + interrupts =
> + <0 413 0 /* CE0 */ >,
> + <0 414 0 /* CE1 */ >,
> + <0 415 0 /* CE2 */ >,
> + <0 416 0 /* CE3 */ >,
> + <0 417 0 /* CE4 */ >,
> + <0 418 0 /* CE5 */ >,
> + <0 420 0 /* CE6 */ >,
> + <0 421 0 /* CE7 */ >,
> + <0 422 0 /* CE8 */ >,
> + <0 423 0 /* CE9 */ >,
> + <0 424 0 /* CE10 */ >,
> + <0 425 0 /* CE11 */ >;
> + };
> };
> };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
next prev parent reply other threads:[~2018-10-08 19:44 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-01 11:26 [PATCH v2 0/4] Enable ath10k wcn3990 wifi driver support on sdm845 Govind Singh
2018-10-01 11:26 ` [PATCH v2 1/4] dt: bindings: add missing dt properties for WCN3990 wifi node Govind Singh
2018-10-01 11:26 ` [PATCH v2 2/4] dts: arm64/sdm845: Add WCN3990 WLAN module device node Govind Singh
2018-10-08 19:44 ` Brian Norris [this message]
2018-10-01 11:26 ` [PATCH v2 3/4] dt: bindings: add bindings for wifi iommu node Govind Singh
2018-10-01 11:26 ` [PATCH v2 4/4] dts: arm64/sdm845: Enable iommu for WCN3990 wifi module device node Govind Singh
2018-10-09 1:30 ` Brian Norris
2018-10-08 19:45 ` [PATCH v2 0/4] Enable ath10k wcn3990 wifi driver support on sdm845 Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181008194422.GA124443@ban.mtv.corp.google.com \
--to=briannorris@chromium.org \
--cc=andy.gross@linaro.org \
--cc=ath10k@lists.infradead.org \
--cc=devicetree@vger.kernel.org \
--cc=govinds@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).