Re: [PATCH] mt76x0: antenna select corrections

[Stanislaw Gruszka <sgruszka@redhat.com>]

On Thu, Oct 18, 2018 at 11:13:36AM +0200, Lorenzo Bianconi wrote:
> >  static void mt76x0_phy_ant_select(struct mt76x02_dev *dev)
> >  {
> > -	struct ieee80211_channel *chan = dev->mt76.chandef.chan;
> > -
> > -	/* single antenna mode */
> > -	if (chan->band == NL80211_BAND_2GHZ) {
> > -		mt76_rmw(dev, MT_COEXCFG3,
> > -			 BIT(5) | BIT(4) | BIT(3) | BIT(2), BIT(1));
> > -		mt76_rmw(dev, MT_WLAN_FUN_CTRL, BIT(5), BIT(6));
> > +	u16 ee_ant = mt76x02_eeprom_get(dev, MT_EE_ANTENNA);
> > +	u16 nic_conf2 = mt76x02_eeprom_get(dev, MT_EE_NIC_CONF_2);
> > +	u32 wlan, coex3, cmb;
> > +	bool ant_div;
> > +
> > +	wlan = mt76_rr(dev, MT_WLAN_FUN_CTRL);
> > +	cmb = mt76_rr(dev, MT_CMB_CTRL);
> > +	coex3 = mt76_rr(dev, MT_COEXCFG3);
> > +
> > +	cmb   &= ~(BIT(15) | BIT(12));
> 
> I guess should be BIT(14) here (at least for single antenna mode)

Yes , I will fix it.

> > +	coex3 &= ~GENMASK(5, 1);
> 
> according to vendor sdk BIT(1) should not cleared if device supports 5GHz band
> (signle antenna mode)

It is set below for that case:

> > +		if (dev->mt76.cap.has_5ghz) {
> > +			coex3 |= BIT(3) | BIT(4);
> > +		} else {
> > +			wlan |= BIT(6);
> > +			coex3 |= BIT(1);
> > +		}


Thanks
Stanislaw