Re: [BUG] mt76x0u: Probing issues on Raspberry Pi 3 B+

[Lorenzo Bianconi <lorenzo.bianconi@redhat.com>]

> Hi,
> 
> Am 11.02.19 um 16:10 schrieb Lorenzo Bianconi:
> >> Hi Lorenzo,
> >>
> >> Am 11.02.19 um 12:06 schrieb Lorenzo Bianconi:
> >>>> Hi,
> >>>>
> >>>> Am 11.02.19 um 11:04 schrieb Lorenzo Bianconi:
> >>>>>> On Sun, Feb 10, 2019 at 11:22:25AM +0100, Lorenzo Bianconi wrote:
> >>>>>>>> On Sat, Feb 09, 2019 at 09:29:05PM +0100, Stefan Wahren wrote:
> >>>>>>>>>> could you please test the following series:
> >>>>>>>>>> https://patchwork.kernel.org/cover/10764453/
> >>>>>>>>> yeah this fixed the probing timeout and the driver will probe successful. AFAIK the dwc2 host mode doesn't support scatter-gather yet.
> >>>>>>>> So this is either dwc2 scatter-gather problem which should be addressed in
> >>>>>>>> this driver or mt76x0u does something wrong when configuring SG.
> >>>>>>>>
> >>>>>>>> Disabling SG is just workaround, which do not address actual problem.
> >>>>>>>>
> >>>>>>>> I think I found mt76x0u issue that could cause this USB probe error
> >>>>>>>> (and possibly also address AMD IOMMU issue). We seems do not correctly
> >>>>>>>> set URB transfer length smaller than sg buffer length. Attached  patch
> >>>>>>>> should correct that.
> >>>>>>> Hi Stanislaw,
> >>>>>>>
> >>>>>>> I think 'sg[0].length' is already set in mt76u_fill_rx_sg().
> >>>>>> It is, buf->len and sg[0].length are initialized to the same value for 1
> >>>>>> segment. But then buf->len (assigned to urb->buffer_transfer_length) change
> >>>>>> to smaller value , but sg[0].length stay the same. What I think can be
> >>>>>> problem for usb host driver.
> >>>>>>
> >>>>>>> Moreover applying this patch I got the following crash (rpi-5.0.y):
> >>>>>> Ok, so with patch probe fail instantly and trigger yet another bug(s)
> >>>>>> on error path. You seems to address that already. 
> >>>>>>
> >>>>>>> Moreover for mt76x0u SG is 'already' disabled since we use just one
> >>>>>>> buffer so from performance point of view I do not see any difference
> >>>>>>> of using a standard usb buffer.
> >>>>>>> This patch has been tested in multiple scenarios and seems to fix
> >>>>>>> reported issues (for usb2.0).
> >>>>>> Ok, so passing buffer via urb->transfer_buffer works. But why urb->sg
> >>>>>> does not work for 1 segment ?
> >>>>> Here it is a different issue respect to the AMD IOMMU one, dwc2 host driver
> >>>>> does not implement SG I/O so probing fails. I guess it is still useful to
> >>>>> implement a 'legacy' mode that enable mt76 on host controllers that do not implement
> >>>>> SG I/O (rpi is a very common device so it will be cool to have mt76 working on
> >>>>> it). Moreover we are not removing functionalities, user experience will remain
> >>>>> the same
> >>>>>
> >>>> i'm not sure that you understand my mail [1] with the summary of my test
> >>>> results.
> >>>>
> >>> Yes right, I did not get it sorry :)
> >>> as indicated here https://www.raspberrypi.org/documentation/linux/kernel/building.md
> >>> I am using bcm2709_defconfig config (using it I spotted the mt76 crashes and
> >>> probe failure)
> >> no problem, at the beginning this could be very confusing. I only want
> >> to clarify that this documentation refers to the vendor kernel (with a
> >> different USB host driver) of the Raspberry Pi Foundation.
> >>
> >> All my results refers to the mainline kernel we all should talk about. I
> >> started a gist which try to describe the mainline variant:
> >> https://gist.github.com/lategoodbye/c7317a42bf7f9c07f5a91baed8c68f75
> > So to summarize:
> > - Raspberry Pi Foundation kernel works just with RFC series
> > - mainline kernel works out of the box
> >
> > is my understanding correct? 
> 
> not really.
> 
> Compiling the mainline kernel with arm/multi_v7_defconfig it works.
> Using the same kernel but with arm64/defconfig doesn't work. But i don't
> think this is a 32/64 bit issue. The arm64 defconfig is much more
> complex (e.g. enables more IOMMU stuff).

thx for the clarification :)

Regards,
Lorenzo

> 
> Regards
> Stefan
>