From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
To: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Felix Fietkau <nbd@nbd.name>, linux-wireless@vger.kernel.org
Subject: Re: [PATCH 2/3] mt76usb: use synchronous msg for mcu command responses
Date: Wed, 20 Feb 2019 11:38:11 +0100 [thread overview]
Message-ID: <20190220103810.GC2626@localhost.localdomain> (raw)
In-Reply-To: <1550657565-7263-2-git-send-email-sgruszka@redhat.com>
> Use usb_bulk_msg for reading MCU command responses. This simplify code
> a lot.
>
> Together with 97a3005759c ("mt76usb: allow mt76u_bulk_msg be used
> for reads") it also fix possible problems with rx data buffers
> not being aligned and contained within single page. After doing
> page_frag_alloc(1024) consecutive page_frag_alloc(PAGE_SIZE) will
> alloc PAGE_SIZE buffer at PAGE_SIZE - 1024 offset.
>
> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Hi Stanislaw,
very nice simplification. I need to post a series and this patch will help
me a lot, thx :)
Just few comments inline
Regards,
Lorenzo
> ---
> drivers/net/wireless/mediatek/mt76/mt76.h | 3 +-
> drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 11 --------
> .../net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 32 +++++++---------------
> drivers/net/wireless/mediatek/mt76/mt76x2/usb.c | 11 --------
> drivers/net/wireless/mediatek/mt76/usb.c | 1 -
> drivers/net/wireless/mediatek/mt76/usb_mcu.c | 31 +++------------------
> 6 files changed, 15 insertions(+), 74 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
> index 45e44bcaa523..ce53069461ec 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> @@ -384,8 +384,7 @@ struct mt76_usb {
>
> struct mt76u_mcu {
> struct mutex mutex;
> - struct completion cmpl;
> - struct mt76u_buf res;
> + u8 *data;
> u32 msg_seq;
>
> /* multiple reads */
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
> index da9d05f6074d..f0c33890f1a5 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
> @@ -311,13 +311,11 @@ static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf,
> pm_message_t state)
> {
> struct mt76x02_dev *dev = usb_get_intfdata(usb_intf);
> - struct mt76_usb *usb = &dev->mt76.usb;
>
> mt76u_stop_queues(&dev->mt76);
> mt76x0u_mac_stop(dev);
> clear_bit(MT76_STATE_MCU_RUNNING, &dev->mt76.state);
> mt76x0_chip_onoff(dev, false, false);
> - usb_kill_urb(usb->mcu.res.urb);
>
> return 0;
> }
> @@ -328,15 +326,6 @@ static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf)
> struct mt76_usb *usb = &dev->mt76.usb;
> int ret;
>
> - reinit_completion(&usb->mcu.cmpl);
> - ret = mt76u_submit_buf(&dev->mt76, USB_DIR_IN,
> - MT_EP_IN_CMD_RESP,
> - &usb->mcu.res, GFP_KERNEL,
> - mt76u_mcu_complete_urb,
> - &usb->mcu.cmpl);
> - if (ret < 0)
> - goto err;
> -
> ret = mt76u_submit_rx_buffers(&dev->mt76);
> if (ret < 0)
> goto err;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> index f497c8e4332a..0cb8751321a1 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c
> @@ -61,33 +61,21 @@ mt76x02u_multiple_mcu_reads(struct mt76_dev *dev, u8 *data, int len)
> static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq)
> {
> struct mt76_usb *usb = &dev->usb;
> - struct mt76u_buf *buf = &usb->mcu.res;
> - struct urb *urb = buf->urb;
> - u8 *data = buf->buf;
> - int i, ret;
> + u8 *data = usb->mcu.data;
> + int i, len, ret;
> u32 rxfce;
>
> for (i = 0; i < 5; i++) {
> - if (!wait_for_completion_timeout(&usb->mcu.cmpl,
> - msecs_to_jiffies(300)))
> + ret = mt76u_bulk_msg(dev, data, MCU_RESP_URB_SIZE, &len, 300);
> + if (ret == -ETIMEDOUT)
> continue;
> -
> - if (urb->status)
> - return -EIO;
> + if (ret)
> + goto out;
>
> if (usb->mcu.rp)
> - mt76x02u_multiple_mcu_reads(dev, data + 4,
> - urb->actual_length - 8);
> + mt76x02u_multiple_mcu_reads(dev, data + 4, len - 8);
>
> rxfce = get_unaligned_le32(data);
> - ret = mt76u_submit_buf(dev, USB_DIR_IN,
> - MT_EP_IN_CMD_RESP,
> - buf, GFP_KERNEL,
> - mt76u_mcu_complete_urb,
> - &usb->mcu.cmpl);
> - if (ret)
> - return ret;
> -
> if (seq == FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce) &&
> FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce) == EVT_CMD_DONE)
> return 0;
> @@ -96,9 +84,9 @@ static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq)
> FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce),
> seq, FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce));
> }
> -
> - dev_err(dev->dev, "error: %s timed out\n", __func__);
> - return -ETIMEDOUT;
> +out:
> + dev_err(dev->dev, "error: %s failed with %d\n", __func__, ret);
> + return ret;
> }
>
> static int
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
> index f81a85e96922..ddb6b2c48e01 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
> @@ -100,11 +100,9 @@ static int __maybe_unused mt76x2u_suspend(struct usb_interface *intf,
> pm_message_t state)
> {
> struct mt76x02_dev *dev = usb_get_intfdata(intf);
> - struct mt76_usb *usb = &dev->mt76.usb;
>
> mt76u_stop_queues(&dev->mt76);
> mt76x2u_stop_hw(dev);
> - usb_kill_urb(usb->mcu.res.urb);
>
> return 0;
> }
> @@ -115,15 +113,6 @@ static int __maybe_unused mt76x2u_resume(struct usb_interface *intf)
> struct mt76_usb *usb = &dev->mt76.usb;
> int err;
>
> - reinit_completion(&usb->mcu.cmpl);
> - err = mt76u_submit_buf(&dev->mt76, USB_DIR_IN,
> - MT_EP_IN_CMD_RESP,
> - &usb->mcu.res, GFP_KERNEL,
> - mt76u_mcu_complete_urb,
> - &usb->mcu.cmpl);
> - if (err < 0)
> - goto err;
> -
> err = mt76u_submit_rx_buffers(&dev->mt76);
> if (err < 0)
> goto err;
> diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
> index 78191968b4fa..5c3b7f735aae 100644
> --- a/drivers/net/wireless/mediatek/mt76/usb.c
> +++ b/drivers/net/wireless/mediatek/mt76/usb.c
> @@ -933,7 +933,6 @@ int mt76u_init(struct mt76_dev *dev,
> INIT_DELAYED_WORK(&usb->stat_work, mt76u_tx_status_data);
> skb_queue_head_init(&dev->rx_skb[MT_RXQ_MAIN]);
>
> - init_completion(&usb->mcu.cmpl);
> mutex_init(&usb->mcu.mutex);
>
> mutex_init(&usb->usb_ctrl_mtx);
> diff --git a/drivers/net/wireless/mediatek/mt76/usb_mcu.c b/drivers/net/wireless/mediatek/mt76/usb_mcu.c
> index 72c8607da4b4..747231edc57d 100644
> --- a/drivers/net/wireless/mediatek/mt76/usb_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/usb_mcu.c
> @@ -16,42 +16,19 @@
>
> #include "mt76.h"
>
> -void mt76u_mcu_complete_urb(struct urb *urb)
> -{
> - struct completion *cmpl = urb->context;
> -
> - complete(cmpl);
> -}
> -EXPORT_SYMBOL_GPL(mt76u_mcu_complete_urb);
> -
> int mt76u_mcu_init_rx(struct mt76_dev *dev)
> {
> struct mt76_usb *usb = &dev->usb;
> - int err;
>
> - err = mt76u_buf_alloc(dev, &usb->mcu.res, MCU_RESP_URB_SIZE,
> - MCU_RESP_URB_SIZE, GFP_KERNEL);
> - if (err < 0)
> - return err;
> -
> - err = mt76u_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP,
> - &usb->mcu.res, GFP_KERNEL,
> - mt76u_mcu_complete_urb,
> - &usb->mcu.cmpl);
> - if (err < 0)
> - mt76u_buf_free(&usb->mcu.res);
> -
> - return err;
> + usb->mcu.data = kmalloc(MCU_RESP_URB_SIZE, GFP_KERNEL);
if you use devm_kmalloc() you can drop mt76u_mcu_deinit
Regards,
Lorenzo
> + return usb->mcu.data ? 0 : -ENOMEM;
> }
> EXPORT_SYMBOL_GPL(mt76u_mcu_init_rx);
>
> void mt76u_mcu_deinit(struct mt76_dev *dev)
> {
> - struct mt76u_buf *buf = &dev->usb.mcu.res;
> + struct mt76_usb *usb = &dev->usb;
>
> - if (buf->urb) {
> - usb_kill_urb(buf->urb);
> - mt76u_buf_free(buf);
> - }
> + kfree(usb->mcu.data);
> }
> EXPORT_SYMBOL_GPL(mt76u_mcu_deinit);
> --
> 2.7.5
>
next prev parent reply other threads:[~2019-02-20 10:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-20 10:12 [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads Stanislaw Gruszka
2019-02-20 10:12 ` [PATCH 2/3] mt76usb: use synchronous msg for mcu command responses Stanislaw Gruszka
2019-02-20 10:38 ` Lorenzo Bianconi [this message]
2019-02-20 10:12 ` [PATCH 3/3] mt76usb: remove usb_mcu.c Stanislaw Gruszka
2019-02-20 10:41 ` Lorenzo Bianconi
2019-02-20 10:31 ` [PATCH 1/3] mt76usb: allow mt76u_bulk_msg be used for reads Lorenzo Bianconi
2019-02-20 11:28 ` Lorenzo Bianconi
2019-02-20 12:01 ` Stanislaw Gruszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190220103810.GC2626@localhost.localdomain \
--to=lorenzo.bianconi@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=nbd@nbd.name \
--cc=sgruszka@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).