[PATCH AUTOSEL 5.0 063/262] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies

[PATCH AUTOSEL 5.0 063/262] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies

[Sasha Levin]

From: Alexei Avshalom Lazar <ailizaro@codeaurora.org>

[ Upstream commit de77a53c2d1e8fb3621e63e8e1f0f0c9a1a99ff7 ]

ies1 or ies2 might be null when code inside
_wil_cfg80211_merge_extra_ies access them.
Add explicit check for null and make sure ies1/ies2 are not
accessed in such a case.

spos might be null and be accessed inside
_wil_cfg80211_merge_extra_ies.
Add explicit check for null in the while condition statement
and make sure spos is not accessed in such a case.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 9b2f9f543952..5a44f9d0ff02 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1580,6 +1580,12 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
 	u8 *buf, *dpos;
 	const u8 *spos;
 
+	if (!ies1)
+		ies1_len = 0;
+
+	if (!ies2)
+		ies2_len = 0;
+
 	if (ies1_len == 0 && ies2_len == 0) {
 		*merged_ies = NULL;
 		*merged_len = 0;
@@ -1589,17 +1595,19 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
 	buf = kmalloc(ies1_len + ies2_len, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
-	memcpy(buf, ies1, ies1_len);
+	if (ies1)
+		memcpy(buf, ies1, ies1_len);
 	dpos = buf + ies1_len;
 	spos = ies2;
-	while (spos + 1 < ies2 + ies2_len) {
+	while (spos && (spos + 1 < ies2 + ies2_len)) {
 		/* IE tag at offset 0, length at offset 1 */
 		u16 ielen = 2 + spos[1];
 
 		if (spos + ielen > ies2 + ies2_len)
 			break;
 		if (spos[0] == WLAN_EID_VENDOR_SPECIFIC &&
-		    !_wil_cfg80211_find_ie(ies1, ies1_len, spos, ielen)) {
+		    (!ies1 || !_wil_cfg80211_find_ie(ies1, ies1_len,
+						     spos, ielen))) {
 			memcpy(dpos, spos, ielen);
 			dpos += ielen;
 		}
-- 
2.19.1

[PATCH AUTOSEL 5.0 064/262] mt76: fix a leaked reference by adding a missing of_node_put

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 34e022d8b780a03902d82fb3997ba7c7b1f40c81 ]

The call to of_find_node_by_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/net/wireless/mediatek/mt76/eeprom.c:58:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:61:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:67:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:70:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.
./drivers/net/wireless/mediatek/mt76/eeprom.c:72:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 48, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/eeprom.c | 24 ++++++++++++++-------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/eeprom.c b/drivers/net/wireless/mediatek/mt76/eeprom.c
index 530e5593765c..a1529920d877 100644
--- a/drivers/net/wireless/mediatek/mt76/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/eeprom.c
@@ -54,22 +54,30 @@ mt76_get_of_eeprom(struct mt76_dev *dev, int len)
 		part = np->name;
 
 	mtd = get_mtd_device_nm(part);
-	if (IS_ERR(mtd))
-		return PTR_ERR(mtd);
+	if (IS_ERR(mtd)) {
+		ret =  PTR_ERR(mtd);
+		goto out_put_node;
+	}
 
-	if (size <= sizeof(*list))
-		return -EINVAL;
+	if (size <= sizeof(*list)) {
+		ret = -EINVAL;
+		goto out_put_node;
+	}
 
 	offset = be32_to_cpup(list);
 	ret = mtd_read(mtd, offset, len, &retlen, dev->eeprom.data);
 	put_mtd_device(mtd);
 	if (ret)
-		return ret;
+		goto out_put_node;
 
-	if (retlen < len)
-		return -EINVAL;
+	if (retlen < len) {
+		ret = -EINVAL;
+		goto out_put_node;
+	}
 
-	return 0;
+out_put_node:
+	of_node_put(np);
+	return ret;
 #else
 	return -ENOENT;
 #endif
-- 
2.19.1

[PATCH AUTOSEL 5.0 065/262] ath10k: Fix the wrong updation of BW in tx_stats debugfs entry

[Sasha Levin]

From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit ef9051c72ab7bc664e8047c55ac74bdb1c7fa3ee ]

Currently, the bandwidth is updated wrongly in BW table in tx_stats
debugfs per sta as there is difference in number of bandwidth type
in mac80211 and driver stats table. This leads to bandwidth getting
updated at wrong index in bandwidth table in tx_stats.

Fix this index mismatch between mac80211 and driver stats table (BW table)
by making the number of bandwidth type in driver compatible with mac80211.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: a904417fc876 ("ath10k: add extended per sta tx statistics support")
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 7 ++++---
 drivers/net/wireless/ath/ath10k/wmi.h         | 2 +-
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 4778a455d81a..068f1a7e07d3 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -696,11 +696,12 @@ static ssize_t ath10k_dbg_sta_dump_tx_stats(struct file *file,
 						 "  %llu ", stats->ht[j][i]);
 			len += scnprintf(buf + len, size - len, "\n");
 			len += scnprintf(buf + len, size - len,
-					" BW %s (20,40,80,160 MHz)\n", str[j]);
+					" BW %s (20,5,10,40,80,160 MHz)\n", str[j]);
 			len += scnprintf(buf + len, size - len,
-					 "  %llu %llu %llu %llu\n",
+					 "  %llu %llu %llu %llu %llu %llu\n",
 					 stats->bw[j][0], stats->bw[j][1],
-					 stats->bw[j][2], stats->bw[j][3]);
+					 stats->bw[j][2], stats->bw[j][3],
+					 stats->bw[j][4], stats->bw[j][5]);
 			len += scnprintf(buf + len, size - len,
 					 " NSS %s (1x1,2x2,3x3,4x4)\n", str[j]);
 			len += scnprintf(buf + len, size - len,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 2034ccc7cc72..1d5d0209ebeb 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -5003,7 +5003,7 @@ enum wmi_rate_preamble {
 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags)	(((flags) >> 6) & 0x1)
 
 #define ATH10K_VHT_MCS_NUM	10
-#define ATH10K_BW_NUM		4
+#define ATH10K_BW_NUM		6
 #define ATH10K_NSS_NUM		4
 #define ATH10K_LEGACY_NUM	12
 #define ATH10K_GI_NUM		2
-- 
2.19.1

[PATCH AUTOSEL 5.0 079/262] ath10k: don't report unset rssi values to mac80211

[Sasha Levin]

From: Alagu Sankar <alagusankar@silex-india.com>

[ Upstream commit 7d444522303177f3a3c09b9abb104ddeea470a70 ]

The SDIO firmware does not provide RSSI value to the host, it's only set to
zero. In that case don't report the value to mac80211. One risk here is that
value zero might be a valid value with other firmware, currently there's no way
to detect that.

Without the fix, the rssi value indicated by iw changes between the actual
value and -95.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00005-QCARMSWP-1.

Co-developed-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index f42bac204ef8..ecf34ce7acf0 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2130,9 +2130,15 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 	hdr = (struct ieee80211_hdr *)skb->data;
 	rx_status = IEEE80211_SKB_RXCB(skb);
 	rx_status->chains |= BIT(0);
-	rx_status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
-			    rx->ppdu.combined_rssi;
-	rx_status->flag &= ~RX_FLAG_NO_SIGNAL_VAL;
+	if (rx->ppdu.combined_rssi == 0) {
+		/* SDIO firmware does not provide signal */
+		rx_status->signal = 0;
+		rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
+	} else {
+		rx_status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
+			rx->ppdu.combined_rssi;
+		rx_status->flag &= ~RX_FLAG_NO_SIGNAL_VAL;
+	}
 
 	spin_lock_bh(&ar->data_lock);
 	ch = ar->scan_channel;
-- 
2.19.1

[PATCH AUTOSEL 5.0 116/262] mwifiex: don't advertise IBSS features without FW support

[Sasha Levin]

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit 6f21ab30469d670de620f758330aca9f3433f693 ]

As it is, doing something like

  # iw phy phy0 interface add foobar type ibss

on a firmware that doesn't have ad-hoc support just yields failures of
HostCmd_CMD_SET_BSS_MODE, which happened to return a '-1' error code
(-EPERM? not really right...) and sometimes may even crash the firmware
along the way.

Let's parse the firmware capability flag while registering the wiphy, so
we don't allow attempting IBSS at all, and we get a proper -EOPNOTSUPP
from nl80211 instead.

Fixes: e267e71e68ae ("mwifiex: Disable adhoc feature based on firmware capability")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 1467af22e394..883752f640b4 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -4310,11 +4310,13 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 	wiphy->mgmt_stypes = mwifiex_mgmt_stypes;
 	wiphy->max_remain_on_channel_duration = 5000;
 	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
-				 BIT(NL80211_IFTYPE_ADHOC) |
 				 BIT(NL80211_IFTYPE_P2P_CLIENT) |
 				 BIT(NL80211_IFTYPE_P2P_GO) |
 				 BIT(NL80211_IFTYPE_AP);
 
+	if (ISSUPP_ADHOC_ENABLED(adapter->fw_cap_info))
+		wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+
 	wiphy->bands[NL80211_BAND_2GHZ] = &mwifiex_band_2ghz;
 	if (adapter->config_bands & BAND_A)
 		wiphy->bands[NL80211_BAND_5GHZ] = &mwifiex_band_5ghz;
@@ -4374,11 +4376,13 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 	wiphy->available_antennas_tx = BIT(adapter->number_of_antenna) - 1;
 	wiphy->available_antennas_rx = BIT(adapter->number_of_antenna) - 1;
 
-	wiphy->features |= NL80211_FEATURE_HT_IBSS |
-			   NL80211_FEATURE_INACTIVITY_TIMER |
+	wiphy->features |= NL80211_FEATURE_INACTIVITY_TIMER |
 			   NL80211_FEATURE_LOW_PRIORITY_SCAN |
 			   NL80211_FEATURE_NEED_OBSS_SCAN;
 
+	if (ISSUPP_ADHOC_ENABLED(adapter->fw_cap_info))
+		wiphy->features |= NL80211_FEATURE_HT_IBSS;
+
 	if (ISSUPP_RANDOM_MAC(adapter->fw_cap_info))
 		wiphy->features |= NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR |
 				   NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR |
-- 
2.19.1

Re: [PATCH AUTOSEL 5.0 116/262] mwifiex: don't advertise IBSS features without FW support

[Brian Norris]

On Wed, Mar 27, 2019 at 11:05 AM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Brian Norris <briannorris@chromium.org>
>
> [ Upstream commit 6f21ab30469d670de620f758330aca9f3433f693 ]
>
> As it is, doing something like
>
>   # iw phy phy0 interface add foobar type ibss
>
> on a firmware that doesn't have ad-hoc support just yields failures of
> HostCmd_CMD_SET_BSS_MODE, which happened to return a '-1' error code
> (-EPERM? not really right...) and sometimes may even crash the firmware
> along the way.
>
> Let's parse the firmware capability flag while registering the wiphy, so
> we don't allow attempting IBSS at all, and we get a proper -EOPNOTSUPP
> from nl80211 instead.
>
> Fixes: e267e71e68ae ("mwifiex: Disable adhoc feature based on firmware capability")
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

The backport seems valid and useful:

Reviewed-by: Brian Norris <briannorris@chromium.org>

[PATCH AUTOSEL 5.0 127/262] mt76: usb: do not run mt76u_queues_deinit twice

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>

[ Upstream commit b3098121c42caaf3aea239b8655cf52d45be116f ]

Do not call mt76u_queues_deinit routine in mt76u_alloc_queues error path
since it will be run in mt76x0u_register_device or
mt76x2u_register_device error path. Current implementation triggers the
following kernel warning:

[   67.005516] WARNING: CPU: 2 PID: 761 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa4/0xb8
[   67.019513] refcount_t: underflow; use-after-free.
[   67.099872] Hardware name: BCM2835
[   67.106268] Backtrace:
[   67.111584] [<8010c91c>] (dump_backtrace) from [<8010cc00>] (show_stack+0x20/0x24)
[   67.124974]  r6:60000013 r5:ffffffff r4:00000000 r3:a50bade6
[   67.132226] [<8010cbe0>] (show_stack) from [<807ca5f4>] (dump_stack+0xc8/0x114)
[   67.141225] [<807ca52c>] (dump_stack) from [<8011e65c>] (__warn+0xf4/0x120)
[   67.149849]  r9:000000bb r8:804d0138 r7:00000009 r6:8099dc84 r5:00000000 r4:b66c7b58
[   67.160767] [<8011e568>] (__warn) from [<8011e6d0>] (warn_slowpath_fmt+0x48/0x50)
[   67.171436]  r9:7f65e128 r8:80d1419c r7:80c0bac4 r6:b97b3044 r5:b7368e00 r4:00000000
[   67.182433] [<8011e68c>] (warn_slowpath_fmt) from [<804d0138>] (refcount_sub_and_test_checked+0xa4/0xb8)
[   67.195221]  r3:80c91c25 r2:8099dc94
[   67.200370]  r4:00000000
[   67.204397] [<804d0094>] (refcount_sub_and_test_checked) from [<804d0164>] (refcount_dec_and_test_checked+0x18/0x1c)
[   67.218046]  r4:b7368e00 r3:00000001
[   67.223125] [<804d014c>] (refcount_dec_and_test_checked) from [<805db49c>] (usb_free_urb+0x20/0x4c)
[   67.235358] [<805db47c>] (usb_free_urb) from [<7f639804>] (mt76u_buf_free+0x98/0xac [mt76_usb])
[   67.247302]  r4:00000001 r3:00000001
[   67.252468] [<7f63976c>] (mt76u_buf_free [mt76_usb]) from [<7f639ef8>] (mt76u_queues_deinit+0x44/0x100 [mt76_usb])
[   67.266102]  r8:b8fe8600 r7:b5dac480 r6:b5dace20 r5:00000001 r4:00000000 r3:00000080
[   67.277132] [<7f639eb4>] (mt76u_queues_deinit [mt76_usb]) from [<7f65c040>] (mt76x0u_cleanup+0x40/0x4c [mt76x0u])
[   67.290737]  r7:b5dac480 r6:b8fe8600 r5:ffffffea r4:b5dace20
[   67.298069] [<7f65c000>] (mt76x0u_cleanup [mt76x0u]) from [<7f65c564>] (mt76x0u_probe+0x1f0/0x354 [mt76x0u])
[   67.311174]  r4:b5dace20 r3:00000000
[   67.316312] [<7f65c374>] (mt76x0u_probe [mt76x0u]) from [<805e0b6c>] (usb_probe_interface+0x104/0x240)
[   67.328915]  r7:00000000 r6:7f65e034 r5:b6634800 r4:b8fe8620
[   67.336276] [<805e0a68>] (usb_probe_interface) from [<8056a8bc>] (really_probe+0x224/0x2f8)
[   67.347965]  r10:b65f0a00 r9:00000019 r8:7f65e034 r7:80d3e124 r6:00000000 r5:80d3e120
[   67.359175]  r4:b8fe8620 r3:805e0a68
[   67.364384] [<8056a698>] (really_probe) from [<8056ab60>] (driver_probe_device+0x6c/0x180)
[   67.375974]  r10:b65f0a00 r9:7f65e2c0 r8:b8fe8620 r7:00000000 r6:7f65e034 r5:7f65e034
[   67.387170]  r4:b8fe8620 r3:00000000
[   67.392378] [<8056aaf4>] (driver_probe_device) from [<8056ad54>] (__driver_attach+0xe0/0xe4)
[   67.404097]  r9:7f65e2c0 r8:7f65d22c r7:00000000 r6:b8fe8654 r5:7f65e034 r4:b8fe8620
[   67.415122] [<8056ac74>] (__driver_attach) from [<8056880c>] (bus_for_each_dev+0x68/0xa0)
[   67.426628]  r6:8056ac74 r5:7f65e034 r4:00000000 r3:00000027
[   67.434017] [<805687a4>] (bus_for_each_dev) from [<8056a1cc>] (driver_attach+0x28/0x30)
[   67.445394]  r6:80c6ddc8 r5:b7368f80 r4:7f65e034
[   67.451703] [<8056a1a4>] (driver_attach) from [<80569c24>] (bus_add_driver+0x194/0x21c)
[   67.463081] [<80569a90>] (bus_add_driver) from [<8056b504>] (driver_register+0x8c/0x124)
[   67.474560]  r7:80c6ddc8 r6:7f65e034 r5:00000000 r4:7f65e034
[   67.481964] [<8056b478>] (driver_register) from [<805df510>] (usb_register_driver+0x74/0x140)
[   67.493901]  r5:00000000 r4:7f65e000
[   67.499131] [<805df49c>] (usb_register_driver) from [<7f661024>] (mt76x0_driver_init+0x24/0x1000 [mt76x0u])
[   67.512258]  r9:00000001 r8:7f65e308 r7:00000000 r6:80c08d48 r5:7f661000 r4:7f65e2c0
[   67.523404] [<7f661000>] (mt76x0_driver_init [mt76x0u]) from [<80102f6c>] (do_one_initcall+0x4c/0x210)
[   67.536142] [<80102f20>] (do_one_initcall) from [<801ae63c>] (do_init_module+0x6c/0x21c)
[   67.547639]  r8:7f65e308 r7:80c08d48 r6:b65f0ac0 r5:7f65e2c0 r4:7f65e2c0
[   67.556129] [<801ae5d0>] (do_init_module) from [<801ad68c>] (load_module+0x1d10/0x2304)

Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/usb.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c
index b061263453d4..19600b3c6f77 100644
--- a/drivers/net/wireless/mediatek/mt76/usb.c
+++ b/drivers/net/wireless/mediatek/mt76/usb.c
@@ -838,16 +838,9 @@ int mt76u_alloc_queues(struct mt76_dev *dev)
 
 	err = mt76u_alloc_rx(dev);
 	if (err < 0)
-		goto err;
-
-	err = mt76u_alloc_tx(dev);
-	if (err < 0)
-		goto err;
+		return err;
 
-	return 0;
-err:
-	mt76u_queues_deinit(dev);
-	return err;
+	return mt76u_alloc_tx(dev);
 }
 EXPORT_SYMBOL_GPL(mt76u_alloc_queues);
 
-- 
2.19.1

[PATCH AUTOSEL 5.0 145/262] iwlwifi: pcie: fix emergency path

[Sasha Levin]

From: Sara Sharon <sara.sharon@intel.com>

[ Upstream commit c6ac9f9fb98851f47b978a9476594fc3c477a34d ]

Allocator swaps the pending requests with 0 when it starts
working. This means that relying on it n RX path to decide if
to move to emergency is not always a good idea, since it may
be zero, but there are still a lot of unallocated RBs in the
system. Change allocator to decrement the pending requests on
real time. It is more expensive since it accesses the atomic
variable more times, but it gives the RX path a better idea
of the system's status.

Reported-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Fixes: 868a1e863f95 ("iwlwifi: pcie: avoid empty free RB queue")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index 9e850c25877b..c596c7b13504 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -499,7 +499,7 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	struct iwl_rb_allocator *rba = &trans_pcie->rba;
 	struct list_head local_empty;
-	int pending = atomic_xchg(&rba->req_pending, 0);
+	int pending = atomic_read(&rba->req_pending);
 
 	IWL_DEBUG_RX(trans, "Pending allocation requests = %d\n", pending);
 
@@ -554,11 +554,13 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
 			i++;
 		}
 
+		atomic_dec(&rba->req_pending);
 		pending--;
+
 		if (!pending) {
-			pending = atomic_xchg(&rba->req_pending, 0);
+			pending = atomic_read(&rba->req_pending);
 			IWL_DEBUG_RX(trans,
-				     "Pending allocation requests = %d\n",
+				     "Got more pending allocation requests = %d\n",
 				     pending);
 		}
 
@@ -570,12 +572,15 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
 		spin_unlock(&rba->lock);
 
 		atomic_inc(&rba->req_ready);
+
 	}
 
 	spin_lock(&rba->lock);
 	/* return unused rbds to the allocator empty list */
 	list_splice_tail(&local_empty, &rba->rbd_empty);
 	spin_unlock(&rba->lock);
+
+	IWL_DEBUG_RX(trans, "%s, exit.\n", __func__);
 }
 
 /*
-- 
2.19.1

[PATCH AUTOSEL 5.0 157/262] ath10k: fix shadow register implementation for WCN3990

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit 1863008369ae0407508033b4b00f98b985adeb15 ]

WCN3990 supports shadow registers write operation support
for copy engine for regular operation in powersave mode.

Since WCN3990 is a 64-bit target, the shadow register
implementation needs to be done in the copy engine handlers
for 64-bit target. Currently the shadow register implementation
is present in the 32-bit target handlers of copy engine.

Fix the shadow register copy engine write operation
implementation for 64-bit target(WCN3990).

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Fixes: b7ba83f7c414 ("ath10k: add support for shadow register for WNC3990")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/ce.c | 26 +++++++++++++-------------
 drivers/net/wireless/ath/ath10k/ce.h |  2 +-
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 2a5668b4f6bc..1a1ea4bbf8a0 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -500,14 +500,8 @@ static int _ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state,
 	write_index = CE_RING_IDX_INCR(nentries_mask, write_index);
 
 	/* WORKAROUND */
-	if (!(flags & CE_SEND_FLAG_GATHER)) {
-		if (ar->hw_params.shadow_reg_support)
-			ath10k_ce_shadow_src_ring_write_index_set(ar, ce_state,
-								  write_index);
-		else
-			ath10k_ce_src_ring_write_index_set(ar, ctrl_addr,
-							   write_index);
-	}
+	if (!(flags & CE_SEND_FLAG_GATHER))
+		ath10k_ce_src_ring_write_index_set(ar, ctrl_addr, write_index);
 
 	src_ring->write_index = write_index;
 exit:
@@ -581,8 +575,14 @@ static int _ath10k_ce_send_nolock_64(struct ath10k_ce_pipe *ce_state,
 	/* Update Source Ring Write Index */
 	write_index = CE_RING_IDX_INCR(nentries_mask, write_index);
 
-	if (!(flags & CE_SEND_FLAG_GATHER))
-		ath10k_ce_src_ring_write_index_set(ar, ctrl_addr, write_index);
+	if (!(flags & CE_SEND_FLAG_GATHER)) {
+		if (ar->hw_params.shadow_reg_support)
+			ath10k_ce_shadow_src_ring_write_index_set(ar, ce_state,
+								  write_index);
+		else
+			ath10k_ce_src_ring_write_index_set(ar, ctrl_addr,
+							   write_index);
+	}
 
 	src_ring->write_index = write_index;
 exit:
@@ -1404,12 +1404,12 @@ static int ath10k_ce_alloc_shadow_base(struct ath10k *ar,
 				       u32 nentries)
 {
 	src_ring->shadow_base_unaligned = kcalloc(nentries,
-						  sizeof(struct ce_desc),
+						  sizeof(struct ce_desc_64),
 						  GFP_KERNEL);
 	if (!src_ring->shadow_base_unaligned)
 		return -ENOMEM;
 
-	src_ring->shadow_base = (struct ce_desc *)
+	src_ring->shadow_base = (struct ce_desc_64 *)
 			PTR_ALIGN(src_ring->shadow_base_unaligned,
 				  CE_DESC_RING_ALIGN);
 	return 0;
@@ -1461,7 +1461,7 @@ ath10k_ce_alloc_src_ring(struct ath10k *ar, unsigned int ce_id,
 		ret = ath10k_ce_alloc_shadow_base(ar, src_ring, nentries);
 		if (ret) {
 			dma_free_coherent(ar->dev,
-					  (nentries * sizeof(struct ce_desc) +
+					  (nentries * sizeof(struct ce_desc_64) +
 					   CE_DESC_RING_ALIGN),
 					  src_ring->base_addr_owner_space_unaligned,
 					  base_addr);
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index ead9987c3259..463e2fc8b501 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -118,7 +118,7 @@ struct ath10k_ce_ring {
 	u32 base_addr_ce_space;
 
 	char *shadow_base_unaligned;
-	struct ce_desc *shadow_base;
+	struct ce_desc_64 *shadow_base;
 
 	/* keep last */
 	void *per_transfer_context[0];
-- 
2.19.1

[PATCH AUTOSEL 5.0 182/262] iwlwifi: mvm: fix RFH config command with >=10 CPUs

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit dbf592f3d14fb7d532cb7c820b1065cf33e02aaa ]

If we have >=10 (logical) CPUs, our command size exceeds the
internal buffer size and the command fails; fix that by using
IWL_HCMD_DFL_NOCOPY for the command that's allocated anyway.

While at it, also fix the leak of cmd, and use struct_size()
to calculate its size.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 8edbfaa19835 ("iwlwifi: mvm: configure multi RX queue")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
index 0d6c313b6669..19ec55cef802 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -127,13 +127,17 @@ static int iwl_send_rss_cfg_cmd(struct iwl_mvm *mvm)
 
 static int iwl_configure_rxq(struct iwl_mvm *mvm)
 {
-	int i, num_queues, size;
+	int i, num_queues, size, ret;
 	struct iwl_rfh_queue_config *cmd;
+	struct iwl_host_cmd hcmd = {
+		.id = WIDE_ID(DATA_PATH_GROUP, RFH_QUEUE_CONFIG_CMD),
+		.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
+	};
 
 	/* Do not configure default queue, it is configured via context info */
 	num_queues = mvm->trans->num_rx_queues - 1;
 
-	size = sizeof(*cmd) + num_queues * sizeof(struct iwl_rfh_queue_data);
+	size = struct_size(cmd, data, num_queues);
 
 	cmd = kzalloc(size, GFP_KERNEL);
 	if (!cmd)
@@ -154,10 +158,14 @@ static int iwl_configure_rxq(struct iwl_mvm *mvm)
 		cmd->data[i].fr_bd_wid = cpu_to_le32(data.fr_bd_wid);
 	}
 
-	return iwl_mvm_send_cmd_pdu(mvm,
-				    WIDE_ID(DATA_PATH_GROUP,
-					    RFH_QUEUE_CONFIG_CMD),
-				    0, size, cmd);
+	hcmd.data[0] = cmd;
+	hcmd.len[0] = size;
+
+	ret = iwl_mvm_send_cmd(mvm, &hcmd);
+
+	kfree(cmd);
+
+	return ret;
 }
 
 static int iwl_mvm_send_dqa_cmd(struct iwl_mvm *mvm)
-- 
2.19.1

[PATCH AUTOSEL 5.0 195/262] mt7601u: bump supported EEPROM version

[Sasha Levin]

From: Stanislaw Gruszka <sgruszka@redhat.com>

[ Upstream commit 3bd1505fed71d834f45e87b32ff07157fdda47e0 ]

As reported by Michael eeprom 0d is supported and work with the driver.

Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param
with 0d EEPORM looks like this:

RSSI offset: 0 0
Reference temp: f9
LNA gain: 8
Reg channels: 1-14
Per rate power:
	 raw:05 bw20:05 bw40:05
	 raw:05 bw20:05 bw40:05
	 raw:03 bw20:03 bw40:03
	 raw:03 bw20:03 bw40:03
	 raw:04 bw20:04 bw40:04
	 raw:00 bw20:00 bw40:00
	 raw:00 bw20:00 bw40:00
	 raw:00 bw20:00 bw40:00
	 raw:02 bw20:02 bw40:02
	 raw:00 bw20:00 bw40:00
Per channel power:
	 tx_power  ch1:09 ch2:09
	 tx_power  ch3:0a ch4:0a
	 tx_power  ch5:0a ch6:0a
	 tx_power  ch7:0b ch8:0b
	 tx_power  ch9:0b ch10:0b
	 tx_power  ch11:0b ch12:0b
	 tx_power  ch13:0b ch14:0b

Reported-and-tested-by: Michael <ZeroBeat@gmx.de>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt7601u/eeprom.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.h b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
index 662d12703b69..57b503ae63f1 100644
--- a/drivers/net/wireless/mediatek/mt7601u/eeprom.h
+++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
@@ -17,7 +17,7 @@
 
 struct mt7601u_dev;
 
-#define MT7601U_EE_MAX_VER			0x0c
+#define MT7601U_EE_MAX_VER			0x0d
 #define MT7601U_EEPROM_SIZE			256
 
 #define MT7601U_DEFAULT_TX_POWER		6
-- 
2.19.1

[PATCH AUTOSEL 5.0 245/262] brcmfmac: Use firmware_request_nowarn for the clm_blob

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 4ad0be160544ffbdafb7cec39bb8e6dd0a97317a ]

The linux-firmware brcmfmac firmware files contain an embedded table with
per country allowed channels and strength info.

For recent hardware these versions of the firmware are specially build for
linux-firmware, the firmware files directly available from Cypress rely on
a separate clm_blob file for this info.

For some unknown reason Cypress refuses to provide the standard firmware
files + clm_blob files it uses elsewhere for inclusion into linux-firmware,
instead relying on these special builds with the clm_blob info embedded.
This means that the linux-firmware firmware versions often lag behind,
but I digress.

The brcmfmac driver does support the separate clm_blob file and always
tries to load this. Currently we use request_firmware for this. This means
that on any standard install, using the standard combo of linux-kernel +
linux-firmware, we will get a warning:
"Direct firmware load for ... failed with error -2"

On top of this, brcmfmac itself prints: "no clm_blob available (err=-2),
device may have limited channels available".

This commit switches to firmware_request_nowarn, fixing almost any brcmfmac
device logging the warning (it leaves the brcmfmac info message in place).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 1f1e95a15a17..0ce1d8174e6d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -149,7 +149,7 @@ static int brcmf_c_process_clm_blob(struct brcmf_if *ifp)
 		return err;
 	}
 
-	err = request_firmware(&clm, clm_name, bus->dev);
+	err = firmware_request_nowarn(&clm, clm_name, bus->dev);
 	if (err) {
 		brcmf_info("no clm_blob available (err=%d), device may have limited channels available\n",
 			   err);
-- 
2.19.1

[PATCH AUTOSEL 5.0 246/262] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure

[Sasha Levin]

From: Zumeng Chen <zumeng.chen@gmail.com>

[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ]

Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware
failed instead of meaningless goto out to avoid the following memory leak
reports(Only the last one listed):

unreferenced object 0xc28a9a00 (size 512):
  comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
  backtrace:
    [<6624adab>] kmemleak_alloc+0x40/0x74
    [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270
    [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore]
    [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore]
    [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211]
    [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211]
    [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211]
    [<7e1d425a>] process_one_work+0x284/0x42c
    [<55f9432e>] worker_thread+0x2fc/0x48c
    [<abb582c6>] kthread+0x148/0x160
    [<63144b13>] ret_from_fork+0x14/0x2c
    [< (null)>] (null)
    [<1f6e7715>] 0xffffffff

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wlcore/main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 26b187336875..2e12de813a5b 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1085,8 +1085,11 @@ static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt)
 		goto out;
 
 	ret = wl12xx_fetch_firmware(wl, plt);
-	if (ret < 0)
-		goto out;
+	if (ret < 0) {
+		kfree(wl->fw_status);
+		kfree(wl->raw_fw_status);
+		kfree(wl->tx_res_if);
+	}
 
 out:
 	return ret;
-- 
2.19.1