From: Victor Bravo <1905@spmblk.com>
To: Arend Van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>,
Hante Meuleman <hante.meuleman@broadcom.com>,
Chi-Hsien Lin <chi-hsien.lin@cypress.com>,
Wright Feng <wright.feng@cypress.com>,
Kalle Valo <kvalo@codeaurora.org>,
"David S. Miller" <davem@davemloft.net>,
linux-wireless@vger.kernel.org,
brcm80211-dev-list.pdl@broadcom.com,
brcm80211-dev-list@cypress.com, linux-kernel@vger.kernel.org,
Hans de Goede <hdegoede@redhat.com>
Subject: [PATCH RFC] brcmfmac: sanitize DMI strings
Date: Sun, 5 May 2019 16:48:52 +0200 [thread overview]
Message-ID: <20190505144852.addbdluel7edoevm@localhost> (raw)
In-Reply-To: <16a87149068.2764.9b12b7fc0a3841636cfb5e919b41b954@broadcom.com>
Sanitize DMI strings in brcmfmac driver to make resulting filenames
contain only safe characters. This version replaces all non-printable
characters incl. delete (0-31, 127-255), spaces and slashes with
underscores.
This change breaks backward compatibility, but adds control over strings
passed to firmware loader and compatibility with CONFIG_EXTRA_FIRMWARE
which doesn't support spaces in filenames.
Signed-off-by: Victor Bravo <1905@spmblk.com>
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
index 7535cb0d4ac0..fa654ce7172b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
@@ -23,6 +23,14 @@
/* The DMI data never changes so we can use a static buf for this */
static char dmi_board_type[128];
+/* Array of 128 bits representing 7-bit characters allowed in DMI strings. */
+static unsigned char brcmf_dmi_allowed_chars[] = {
+ 0x00, 0x00, 0x00, 0x00, 0xfe, 0x7f, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f
+};
+
+#define BRCMF_DMI_SAFE_CHAR '_'
+
struct brcmf_dmi_data {
u32 chip;
u32 chiprev;
@@ -43,10 +51,6 @@ static const struct brcmf_dmi_data meegopad_t08_data = {
BRCM_CC_43340_CHIP_ID, 2, "meegopad-t08"
};
-static const struct brcmf_dmi_data pov_tab_p1006w_data = {
- BRCM_CC_43340_CHIP_ID, 2, "pov-tab-p1006w-data"
-};
-
static const struct dmi_system_id dmi_platform_data[] = {
{
/* Match for the GPDwin which unfortunately uses somewhat
@@ -85,20 +89,18 @@ static const struct dmi_system_id dmi_platform_data[] = {
},
.driver_data = (void *)&meegopad_t08_data,
},
- {
- /* Point of View TAB-P1006W-232 */
- .matches = {
- DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
- DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "BayTrail"),
- /* Note 105b is Foxcon's USB/PCI vendor id */
- DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "105B"),
- DMI_EXACT_MATCH(DMI_BOARD_NAME, "0E57"),
- },
- .driver_data = (void *)&pov_tab_p1006w_data,
- },
{}
};
+void brcmf_dmi_sanitize(char *dst, const unsigned char *allowed, char safe)
+{
+ while (*dst) {
+ if ((*dst < 0) || !(allowed[*dst / 8] & (1 << (*dst % 8))))
+ *dst = safe;
+ dst++;
+ }
+}
+
void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev)
{
const struct dmi_system_id *match;
@@ -126,6 +128,9 @@ void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev)
if (sys_vendor && product_name) {
snprintf(dmi_board_type, sizeof(dmi_board_type), "%s-%s",
sys_vendor, product_name);
+ brcmf_dmi_sanitize(dmi_board_type,
+ brcmf_dmi_allowed_chars,
+ BRCMF_DMI_SAFE_CHAR);
settings->board_type = dmi_board_type;
}
}
next prev parent reply other threads:[~2019-05-05 14:49 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-04 16:26 PROBLEM: brcmfmac's DMI-based fw file names break built-in fw loader Victor Bravo
2019-05-04 19:11 ` Arend Van Spriel
2019-05-04 19:44 ` Victor Bravo
2019-05-05 8:20 ` Arend Van Spriel
2019-05-05 14:36 ` Victor Bravo
2019-05-05 14:48 ` Victor Bravo [this message]
2019-05-05 14:52 ` [PATCH RFC] brcmfmac: sanitize DMI strings Victor Bravo
2019-05-05 15:03 ` [PATCH RFC] brcmfmac: sanitize DMI strings v2 Victor Bravo
2019-05-06 8:13 ` Hans de Goede
2019-05-06 8:42 ` Kalle Valo
2019-05-06 9:14 ` Victor Bravo
2019-05-06 12:29 ` Kalle Valo
2019-05-06 14:06 ` Victor Bravo
2019-05-06 9:06 ` Victor Bravo
2019-05-06 9:33 ` Hans de Goede
2019-05-06 10:20 ` Victor Bravo
2019-05-06 10:34 ` Hans de Goede
2019-05-06 12:26 ` Kalle Valo
2019-05-06 15:24 ` Victor Bravo
2019-05-06 16:05 ` Hans de Goede
2019-05-06 19:30 ` Arend Van Spriel
2019-05-07 15:38 ` Hans de Goede
2019-05-13 9:21 ` Arend Van Spriel
2019-05-06 8:44 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190505144852.addbdluel7edoevm@localhost \
--to=1905@spmblk.com \
--cc=arend.vanspriel@broadcom.com \
--cc=brcm80211-dev-list.pdl@broadcom.com \
--cc=brcm80211-dev-list@cypress.com \
--cc=chi-hsien.lin@cypress.com \
--cc=davem@davemloft.net \
--cc=franky.lin@broadcom.com \
--cc=hante.meuleman@broadcom.com \
--cc=hdegoede@redhat.com \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=wright.feng@cypress.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).