From: John Crispin <john@phrozen.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
John Crispin <john@phrozen.org>,
Shashidhar Lakkavalli <slakkavalli@datto.com>
Subject: [PATCH V5 3/8] ath11k: move phymode selection from function to array lookup
Date: Mon, 20 May 2019 10:55:03 +0200 [thread overview]
Message-ID: <20190520085508.5888-4-john@phrozen.org> (raw)
In-Reply-To: <20190520085508.5888-1-john@phrozen.org>
With HE support getting added, the approach of using functions will quickly
get convoluted. Change the code to use an array lookup function instead.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 117 ++++++++++++--------------
include/uapi/linux/nl80211.h | 4 +
2 files changed, 57 insertions(+), 64 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index cb0de8e2aa60..c5a55fb893ae 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -105,6 +105,52 @@ static struct ieee80211_rate ath11k_legacy_rates[] = {
{ .bitrate = 540, .hw_value = ATH11K_HW_RATE_OFDM_54M },
};
+static const int
+ath11k_phymodes[NUM_NL80211_BANDS][2][__NL80211_CHAN_WIDTH_NUM] = {
+ [NL80211_BAND_2GHZ] = {
+ {
+ [NL80211_CHAN_WIDTH_5] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_10] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_20_NOHT] = MODE_11G,
+ [NL80211_CHAN_WIDTH_20] = MODE_11NG_HT20,
+ [NL80211_CHAN_WIDTH_40] = MODE_11NG_HT40,
+ [NL80211_CHAN_WIDTH_80] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_80P80] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_160] = MODE_UNKNOWN,
+ }, {
+ [NL80211_CHAN_WIDTH_5] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_10] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_20_NOHT] = MODE_11G,
+ [NL80211_CHAN_WIDTH_20] = MODE_11AX_HE20_2G,
+ [NL80211_CHAN_WIDTH_40] = MODE_11AX_HE40_2G,
+ [NL80211_CHAN_WIDTH_80] = MODE_11AX_HE80_2G,
+ [NL80211_CHAN_WIDTH_80P80] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_160] = MODE_UNKNOWN,
+ },
+ },
+ [NL80211_BAND_5GHZ] = {
+ {
+ [NL80211_CHAN_WIDTH_5] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_10] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_20_NOHT] = MODE_11A,
+ [NL80211_CHAN_WIDTH_20] = MODE_11AC_VHT20,
+ [NL80211_CHAN_WIDTH_40] = MODE_11AC_VHT40,
+ [NL80211_CHAN_WIDTH_80] = MODE_11AC_VHT80,
+ [NL80211_CHAN_WIDTH_160] = MODE_11AC_VHT160,
+ [NL80211_CHAN_WIDTH_80P80] = MODE_11AC_VHT80_80,
+ }, {
+ [NL80211_CHAN_WIDTH_5] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_10] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_20_NOHT] = MODE_11A,
+ [NL80211_CHAN_WIDTH_20] = MODE_11AX_HE20,
+ [NL80211_CHAN_WIDTH_40] = MODE_11AX_HE40,
+ [NL80211_CHAN_WIDTH_80] = MODE_11AX_HE80,
+ [NL80211_CHAN_WIDTH_160] = MODE_11AX_HE160,
+ [NL80211_CHAN_WIDTH_80P80] = MODE_11AX_HE80_80,
+ },
+ },
+};
+
#define ATH11K_MAC_FIRST_OFDM_RATE_IDX 4
#define ath11k_g_rates ath11k_legacy_rates
#define ath11k_g_rates_size (ARRAY_SIZE(ath11k_legacy_rates))
@@ -151,69 +197,6 @@ static int get_num_chains(u32 mask)
return num_chains;
}
-static inline enum wmi_phy_mode
-chan_to_phymode(const struct cfg80211_chan_def *chandef)
-{
- enum wmi_phy_mode phymode = MODE_UNKNOWN;
-
- switch (chandef->chan->band) {
- case NL80211_BAND_2GHZ:
- switch (chandef->width) {
- case NL80211_CHAN_WIDTH_20_NOHT:
- if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM)
- phymode = MODE_11B;
- else
- phymode = MODE_11G;
- break;
- case NL80211_CHAN_WIDTH_20:
- phymode = MODE_11NG_HT20;
- break;
- case NL80211_CHAN_WIDTH_40:
- phymode = MODE_11NG_HT40;
- break;
- case NL80211_CHAN_WIDTH_5:
- case NL80211_CHAN_WIDTH_10:
- case NL80211_CHAN_WIDTH_80:
- case NL80211_CHAN_WIDTH_80P80:
- case NL80211_CHAN_WIDTH_160:
- phymode = MODE_UNKNOWN;
- break;
- }
- break;
- case NL80211_BAND_5GHZ:
- switch (chandef->width) {
- case NL80211_CHAN_WIDTH_20_NOHT:
- phymode = MODE_11A;
- break;
- case NL80211_CHAN_WIDTH_20:
- phymode = MODE_11AC_VHT20;
- break;
- case NL80211_CHAN_WIDTH_40:
- phymode = MODE_11AC_VHT40;
- break;
- case NL80211_CHAN_WIDTH_80:
- phymode = MODE_11AC_VHT80;
- break;
- case NL80211_CHAN_WIDTH_160:
- phymode = MODE_11AC_VHT160;
- break;
- case NL80211_CHAN_WIDTH_80P80:
- phymode = MODE_11AC_VHT80_80;
- break;
- case NL80211_CHAN_WIDTH_5:
- case NL80211_CHAN_WIDTH_10:
- phymode = MODE_UNKNOWN;
- break;
- }
- break;
- default:
- break;
- }
-
- WARN_ON(phymode == MODE_UNKNOWN);
- return phymode;
-}
-
u8 ath11k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
u32 bitrate)
{
@@ -3881,6 +3864,7 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
struct ath11k_base *ab = ar->ab;
struct wmi_vdev_start_req_arg arg = {};
int ret = 0;
+ int he_support = arvif->vif->bss_conf.he_support;
lockdep_assert_held(&ar->conf_mutex);
@@ -3893,7 +3877,12 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
arg.channel.freq = chandef->chan->center_freq;
arg.channel.band_center_freq1 = chandef->center_freq1;
arg.channel.band_center_freq2 = chandef->center_freq2;
- arg.channel.mode = chan_to_phymode(chandef);
+ arg.channel.mode =
+ ath11k_phymodes[chandef->chan->band][he_support][chandef->width];
+ if (arg.channel.mode == MODE_11G &&
+ chandef->chan->flags & IEEE80211_CHAN_NO_OFDM)
+ arg.channel.mode = MODE_11B;
+ WARN_ON(arg.channel.mode == MODE_UNKNOWN);
arg.channel.min_power = 0;
arg.channel.max_power = chandef->chan->max_power * 2;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index dd4f86ee286e..b6e29161ec8b 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4162,6 +4162,10 @@ enum nl80211_chan_width {
NL80211_CHAN_WIDTH_160,
NL80211_CHAN_WIDTH_5,
NL80211_CHAN_WIDTH_10,
+
+ /* keep last */
+ __NL80211_CHAN_WIDTH_NUM,
+ NL80211_CHAN_WIDTH_MAX = __NL80211_CHAN_WIDTH_NUM - 1,
};
/**
--
2.20.1
next prev parent reply other threads:[~2019-05-20 8:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-20 8:55 [PATCH V5 0/8] ath11k: add HE support John Crispin
2019-05-20 8:55 ` [PATCH V5 1/8] mac80211: propagate HE operation info into ieee80211_sta John Crispin
2019-05-20 8:55 ` [PATCH V5 2/8] ath11k: fix some whitespace errors John Crispin
2019-05-20 8:55 ` John Crispin [this message]
2019-05-20 8:55 ` [PATCH V5 4/8] ath11k: add HE handling to the debug code John Crispin
2019-05-20 8:55 ` [PATCH V5 5/8] ath11k: extend reading of FW capabilities John Crispin
2019-05-20 8:55 ` [PATCH V5 6/8] ath11k: add defines for max MCS rates per phymode John Crispin
2019-05-20 8:55 ` [PATCH V5 7/8] ath11k: handle rx status for HE frames John Crispin
2019-05-20 8:55 ` [PATCH V5 8/8] ath11k: add HE support John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190520085508.5888-4-john@phrozen.org \
--to=john@phrozen.org \
--cc=ath11k@lists.infradead.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=slakkavalli@datto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).