From: John Crispin <john@phrozen.org>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org, ath11k@lists.infradead.org,
John Crispin <john@phrozen.org>,
Shashidhar Lakkavalli <slakkavalli@datto.com>
Subject: [PATCH V2 2/6] mac80211: allow turning TWT responder support on and off via netlink
Date: Tue, 28 May 2019 13:49:48 +0200 [thread overview]
Message-ID: <20190528114952.838-3-john@phrozen.org> (raw)
In-Reply-To: <20190528114952.838-1-john@phrozen.org>
Allow the userland daemon to en/disable TWT support for an AP.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
include/net/cfg80211.h | 2 ++
include/net/mac80211.h | 3 +++
include/uapi/linux/nl80211.h | 4 ++++
net/mac80211/cfg.c | 4 +++-
net/wireless/nl80211.c | 5 +++++
5 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 13bfeb712d36..044c519a008f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -876,6 +876,7 @@ enum cfg80211_ap_settings_flags {
* @he_cap: HE capabilities (or %NULL if HE isn't enabled)
* @ht_required: stations must support HT
* @vht_required: stations must support VHT
+ * @twt_responder: Enable Target Wait Time
* @flags: flags, as defined in enum cfg80211_ap_settings_flags
*/
struct cfg80211_ap_settings {
@@ -902,6 +903,7 @@ struct cfg80211_ap_settings {
const struct ieee80211_vht_cap *vht_cap;
const struct ieee80211_he_cap_elem *he_cap;
bool ht_required, vht_required;
+ bool twt_responder;
u32 flags;
};
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b41a9351434f..96359fd3d026 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -506,6 +506,8 @@ struct ieee80211_ftm_responder_params {
* @he_support: does this BSS support HE
* @twt_requester: does this BSS support TWT requester (relevant for managed
* mode only, set if the AP advertises TWT responder role)
+ * @twt_responder: does this BSS support TWT requester (relevant for managed
+ * mode only, set if the AP advertises TWT responder role)
* @assoc: association status
* @ibss_joined: indicates whether this station is part of an IBSS
* or not
@@ -614,6 +616,7 @@ struct ieee80211_bss_conf {
u16 frame_time_rts_th;
bool he_support;
bool twt_requester;
+ bool twt_responder;
/* association related data */
bool assoc, ibss_joined;
bool ibss_creator;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index b6e29161ec8b..07d3f1949f96 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2308,6 +2308,8 @@ enum nl80211_commands {
* @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
* scheduler.
*
+ * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2759,6 +2761,8 @@ enum nl80211_attrs {
NL80211_ATTR_AIRTIME_WEIGHT,
+ NL80211_ATTR_TWT_RESPONDER,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 09dd1c2860fc..8be2f32fedfc 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -939,7 +939,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
BSS_CHANGED_BEACON |
BSS_CHANGED_SSID |
BSS_CHANGED_P2P_PS |
- BSS_CHANGED_TXPOWER;
+ BSS_CHANGED_TXPOWER |
+ BSS_CHANGED_TWT;
int err;
int prev_beacon_int;
@@ -1009,6 +1010,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
sdata->vif.bss_conf.dtim_period = params->dtim_period;
sdata->vif.bss_conf.enable_beacon = true;
sdata->vif.bss_conf.allow_p2p_go_ps = sdata->vif.p2p;
+ sdata->vif.bss_conf.twt_responder = params->twt_responder;
sdata->vif.bss_conf.ssid_len = params->ssid_len;
if (params->ssid_len)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 47e30a58566c..b4dbb6b56853 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -541,6 +541,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_PEER_MEASUREMENTS] =
NLA_POLICY_NESTED(nl80211_pmsr_attr_policy),
[NL80211_ATTR_AIRTIME_WEIGHT] = NLA_POLICY_MIN(NLA_U16, 1),
+ [NL80211_ATTR_TWT_RESPONDER] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -4531,6 +4532,10 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
return PTR_ERR(params.acl);
}
+ if (info->attrs[NL80211_ATTR_TWT_RESPONDER])
+ params.twt_responder =
+ nla_get_flag(info->attrs[NL80211_ATTR_TWT_RESPONDER]);
+
nl80211_calculate_ap_params(¶ms);
if (info->attrs[NL80211_ATTR_EXTERNAL_AUTH_SUPPORT])
--
2.20.1
next prev parent reply other threads:[~2019-05-28 11:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 11:49 [PATCH V2 0/6] mac80211: HE: add TWT and SPR/OBSSPD support John Crispin
2019-05-28 11:49 ` [PATCH V2 1/6] mac80211: dynamically enable the TWT requester support on STA interfaces John Crispin
2019-05-28 11:49 ` John Crispin [this message]
2019-05-28 11:49 ` [PATCH V2 3/6] ath11k: add TWT support John Crispin
2019-05-28 11:49 ` [PATCH V2 4/6] mac80211: HE: add Spatial Reuse IE parsing support John Crispin
2019-06-14 12:34 ` Johannes Berg
2019-05-28 11:49 ` [PATCH V2 5/6] mac80211: allow setting spatial reuse parameters from bss_conf John Crispin
2019-05-28 11:49 ` [PATCH V2 6/6] ath11k: add spatial reuse support John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190528114952.838-3-john@phrozen.org \
--to=john@phrozen.org \
--cc=ath11k@lists.infradead.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=slakkavalli@datto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).