From: Luca Coelho <luca@coelho.fi>
To: kvalo@codeaurora.org
Cc: linux-wireless@vger.kernel.org,
Emmanuel Grumbach <emmanuel.grumbach@intel.com>,
Luca Coelho <luciano.coelho@intel.com>
Subject: [PATCH 4/6] iwlwifi: pcie: don't service an interrupt that was masked
Date: Wed, 19 Jun 2019 20:41:57 +0300 [thread overview]
Message-ID: <20190619174159.13927-5-luca@coelho.fi> (raw)
In-Reply-To: <20190619174159.13927-1-luca@coelho.fi>
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Sometimes the register status can include interrupts that
were masked. We can, for example, get the RF-Kill bit set
in the interrupt status register although this interrupt
was masked. Then if we get the ALIVE interrupt (for example)
that was not masked, we need to *not* service the RF-Kill
interrupt.
Fix this in the MSI-X interrupt handler.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 27 +++++++++++++++-----
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index dcf891a4ce6e..e5220905dff1 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -2111,10 +2111,18 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id)
return IRQ_NONE;
}
- if (iwl_have_debug_level(IWL_DL_ISR))
- IWL_DEBUG_ISR(trans, "ISR inta_fh 0x%08x, enabled 0x%08x\n",
- inta_fh,
+ if (iwl_have_debug_level(IWL_DL_ISR)) {
+ IWL_DEBUG_ISR(trans,
+ "ISR inta_fh 0x%08x, enabled (sw) 0x%08x (hw) 0x%08x\n",
+ inta_fh, trans_pcie->fh_mask,
iwl_read32(trans, CSR_MSIX_FH_INT_MASK_AD));
+ if (inta_fh & ~trans_pcie->fh_mask)
+ IWL_DEBUG_ISR(trans,
+ "We got a masked interrupt (0x%08x)\n",
+ inta_fh & ~trans_pcie->fh_mask);
+ }
+
+ inta_fh &= trans_pcie->fh_mask;
if ((trans_pcie->shared_vec_mask & IWL_SHARED_IRQ_NON_RX) &&
inta_fh & MSIX_FH_INT_CAUSES_Q0) {
@@ -2154,11 +2162,18 @@ irqreturn_t iwl_pcie_irq_msix_handler(int irq, void *dev_id)
}
/* After checking FH register check HW register */
- if (iwl_have_debug_level(IWL_DL_ISR))
+ if (iwl_have_debug_level(IWL_DL_ISR)) {
IWL_DEBUG_ISR(trans,
- "ISR inta_hw 0x%08x, enabled 0x%08x\n",
- inta_hw,
+ "ISR inta_hw 0x%08x, enabled (sw) 0x%08x (hw) 0x%08x\n",
+ inta_hw, trans_pcie->hw_mask,
iwl_read32(trans, CSR_MSIX_HW_INT_MASK_AD));
+ if (inta_hw & ~trans_pcie->hw_mask)
+ IWL_DEBUG_ISR(trans,
+ "We got a masked interrupt 0x%08x\n",
+ inta_hw & ~trans_pcie->hw_mask);
+ }
+
+ inta_hw &= trans_pcie->hw_mask;
/* Alive notification via Rx interrupt will do the real work */
if (inta_hw & MSIX_HW_INT_CAUSES_REG_ALIVE) {
--
2.20.1
next prev parent reply other threads:[~2019-06-19 17:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-19 17:41 [PATCH 0/6] iwlwifi: fixes intended for 5.2 2019-06-19 Luca Coelho
2019-06-19 17:41 ` [PATCH 1/6] iwlwifi: mvm: delay GTK setting in FW in AP mode Luca Coelho
2019-06-19 17:41 ` [PATCH 2/6] iwlwifi: pcie: fix ALIVE interrupt handling for gen2 devices w/o MSI-X Luca Coelho
2019-06-19 17:41 ` [PATCH 3/6] iwlwifi: fix RF-Kill interrupt while FW load for gen2 devices Luca Coelho
2019-06-19 17:41 ` Luca Coelho [this message]
2019-06-19 17:41 ` [PATCH 5/6] iwlwifi: don't WARN when calling iwl_get_shared_mem_conf with RF-Kill Luca Coelho
2019-06-19 17:41 ` [PATCH 6/6] iwlwifi: mvm: clear rfkill_safe_init_done when we start the firmware Luca Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190619174159.13927-5-luca@coelho.fi \
--to=luca@coelho.fi \
--cc=emmanuel.grumbach@intel.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luciano.coelho@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox