Linux wireless drivers development
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Shahar S Matityahu <shahar.s.matityahu@intel.com>,
	Luca Coelho <luciano.coelho@intel.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.1 26/95] iwlwifi: clear persistence bit according to device family
Date: Wed, 26 Jun 2019 20:29:11 -0400	[thread overview]
Message-ID: <20190627003021.19867-26-sashal@kernel.org> (raw)
In-Reply-To: <20190627003021.19867-1-sashal@kernel.org>

From: Shahar S Matityahu <shahar.s.matityahu@intel.com>

[ Upstream commit 44f61b5c832c4085fcf476484efeaeef96dcfb8b ]

The driver attempts to clear persistence bit on any device familiy even
though only 9000 and 22000 families require it. Clear the bit only on
the relevant device families.

Each HW has different address to the write protection register. Use the
right register for each HW

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Fixes: 8954e1eb2270 ("iwlwifi: trans: Clear persistence bit when starting the FW")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-prph.h |  7 ++-
 .../net/wireless/intel/iwlwifi/pcie/trans.c   | 46 +++++++++++++------
 2 files changed, 39 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h
index 1af9f9e1ecd4..0c0799d13e15 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h
@@ -402,7 +402,12 @@ enum aux_misc_master1_en {
 #define AUX_MISC_MASTER1_SMPHR_STATUS	0xA20800
 #define RSA_ENABLE			0xA24B08
 #define PREG_AUX_BUS_WPROT_0		0xA04CC0
-#define PREG_PRPH_WPROT_0		0xA04CE0
+
+/* device family 9000 WPROT register */
+#define PREG_PRPH_WPROT_9000		0xA04CE0
+/* device family 22000 WPROT register */
+#define PREG_PRPH_WPROT_22000		0xA04D00
+
 #define SB_CPU_1_STATUS			0xA01E30
 #define SB_CPU_2_STATUS			0xA01E34
 #define UMAG_SB_CPU_1_STATUS		0xA038C0
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index c4375b868901..2a03d34afa3b 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -1696,26 +1696,26 @@ static int iwl_pcie_init_msix_handler(struct pci_dev *pdev,
 	return 0;
 }
 
-static int _iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power)
+static int iwl_trans_pcie_clear_persistence_bit(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	u32 hpm;
-	int err;
-
-	lockdep_assert_held(&trans_pcie->mutex);
+	u32 hpm, wprot;
 
-	err = iwl_pcie_prepare_card_hw(trans);
-	if (err) {
-		IWL_ERR(trans, "Error while preparing HW: %d\n", err);
-		return err;
+	switch (trans->cfg->device_family) {
+	case IWL_DEVICE_FAMILY_9000:
+		wprot = PREG_PRPH_WPROT_9000;
+		break;
+	case IWL_DEVICE_FAMILY_22000:
+		wprot = PREG_PRPH_WPROT_22000;
+		break;
+	default:
+		return 0;
 	}
 
 	hpm = iwl_read_umac_prph_no_grab(trans, HPM_DEBUG);
 	if (hpm != 0xa5a5a5a0 && (hpm & PERSISTENCE_BIT)) {
-		int wfpm_val = iwl_read_umac_prph_no_grab(trans,
-							  PREG_PRPH_WPROT_0);
+		u32 wprot_val = iwl_read_umac_prph_no_grab(trans, wprot);
 
-		if (wfpm_val & PREG_WFPM_ACCESS) {
+		if (wprot_val & PREG_WFPM_ACCESS) {
 			IWL_ERR(trans,
 				"Error, can not clear persistence bit\n");
 			return -EPERM;
@@ -1724,6 +1724,26 @@ static int _iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power)
 					    hpm & ~PERSISTENCE_BIT);
 	}
 
+	return 0;
+}
+
+static int _iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power)
+{
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+	int err;
+
+	lockdep_assert_held(&trans_pcie->mutex);
+
+	err = iwl_pcie_prepare_card_hw(trans);
+	if (err) {
+		IWL_ERR(trans, "Error while preparing HW: %d\n", err);
+		return err;
+	}
+
+	err = iwl_trans_pcie_clear_persistence_bit(trans);
+	if (err)
+		return err;
+
 	iwl_trans_pcie_sw_reset(trans);
 
 	err = iwl_pcie_apm_init(trans);
-- 
2.20.1


  parent reply	other threads:[~2019-06-27  0:31 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190627003021.19867-1-sashal@kernel.org>
2019-06-27  0:28 ` [PATCH AUTOSEL 5.1 13/95] mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he() Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 19/95] mac80211: mesh: fix RCU warning Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 20/95] mac80211: free peer keys before vif down in mesh Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 22/95] mwifiex: Fix possible buffer overflows at parsing bss descriptor Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 23/95] mwifiex: Abort at too short BSS descriptor element Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 25/95] iwlwifi: fix load in rfkill flow for unified firmware Sasha Levin
2019-06-27  0:29 ` Sasha Levin [this message]
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 27/95] iwlwifi: fix AX201 killer sku loading firmware issue Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 28/95] iwlwifi: Fix double-free problems in iwl_req_fw_callback() Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 29/95] mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies() Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 64/95] mac80211: only warn once on chanctx_conf being NULL Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 65/95] mac80211: do not start any work during reconfigure flow Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 66/95] cfg80211: util: fix bit count off by one Sasha Levin
2019-06-27  0:29 ` [PATCH AUTOSEL 5.1 67/95] cfg80211: report measurement start TSF correctly Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190627003021.19867-26-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luciano.coelho@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=shahar.s.matityahu@intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox