Linux wireless drivers development
 help / color / mirror / Atom feed
From: Luca Coelho <luca@coelho.fi>
To: kvalo@codeaurora.org
Cc: linux-wireless@vger.kernel.org, Luca Coelho <luciano.coelho@intel.com>
Subject: [PATCH 00/20] iwlwifi: updates intended for v5.3 2019-06-28
Date: Fri, 28 Jun 2019 12:19:48 +0300	[thread overview]
Message-ID: <20190628092008.11049-1-luca@coelho.fi> (raw)

From: Luca Coelho <luciano.coelho@intel.com>

Hi,

Here's the second set of patches intended for v5.3.  It's the usual
development, new features, cleanups and bugfixes.

The changes are:

* Special SAR implementation for South Korea;
* Fixes in the module init error paths;
* Debugging infra work continues;
* A few clean-ups;
* Other small fixes and improvements;

As usual, I'm pushing this to a pending branch, for kbuild bot, and
will send a pull-request later.

Please review.

Cheers,
Luca.


Andrei Otcheretianski (1):
  iwlwifi: mvm: Drop large non sta frames

Dan Carpenter (1):
  iwlwifi: remove some unnecessary NULL checks

Emmanuel Grumbach (2):
  iwlwifi: support FSEQ TLV even when FMAC is not compiled
  iwlwifi: mvm: make the usage of TWT configurable

Gustavo A. R. Silva (2):
  iwlwifi: lib: Use struct_size() helper
  iwlwifi: d3: Use struct_size() helper

Haim Dreyfuss (2):
  iwlwifi: Add support for SAR South Korea limitation
  iwlwifi: mvm: Add log information about SAR status

Johannes Berg (1):
  iwlwifi: fix module init error paths

Luca Coelho (2):
  iwlwifi: pcie: increase the size of PCI dumps
  iwlwifi: mvm: remove MAC_FILTER_IN_11AX for AP mode

Naftali Goldstein (1):
  iwlwifi: mvm: correctly fill the ac array in the iwl_mac_ctx_cmd

Shahar S Matityahu (7):
  iwlwifi: dbg: fix debug monitor stop and restart delays
  iwlwifi: dbg_ini: enforce apply point early on buffer allocation tlv
  iwlwifi: dbg_ini: remove redundant checking of ini mode
  iwlwifi: dbg: move trans debug fields to a separate struct
  iwlwifi: dbg_ini: fix debug monitor stop and restart in ini mode
  iwlwifi: dbg: don't stop dbg recording before entering D3 from 9000
    devices
  iwlwifi: dbg: debug recording stop and restart command remove

Shaul Triebitz (1):
  iwlwifi: mvm: convert to FW AC when configuring MU EDCA

 drivers/net/wireless/intel/iwlwifi/dvm/lib.c  |   3 +-
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c  |  28 +--
 drivers/net/wireless/intel/iwlwifi/fw/acpi.h  |   5 +-
 .../net/wireless/intel/iwlwifi/fw/api/power.h |  12 ++
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c   | 100 ++++++-----
 drivers/net/wireless/intel/iwlwifi/fw/dbg.h   |  93 +++++-----
 drivers/net/wireless/intel/iwlwifi/fw/file.h  |   3 +
 .../net/wireless/intel/iwlwifi/iwl-dbg-tlv.c  |  32 ++--
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c  |  34 +++-
 .../net/wireless/intel/iwlwifi/iwl-trans.h    |  75 ++++----
 .../wireless/intel/iwlwifi/mvm/constants.h    |   1 +
 drivers/net/wireless/intel/iwlwifi/mvm/d3.c   |  14 +-
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c   |  62 +++++--
 .../net/wireless/intel/iwlwifi/mvm/mac-ctxt.c |  16 +-
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c |  11 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mvm.h  |   2 +
 drivers/net/wireless/intel/iwlwifi/mvm/nvm.c  |   9 +
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c  |  10 +-
 .../net/wireless/intel/iwlwifi/mvm/rs-fw.c    |  23 ++-
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c   |   3 +
 .../net/wireless/intel/iwlwifi/mvm/utils.c    |  20 ++-
 .../intel/iwlwifi/pcie/ctxt-info-gen3.c       |   8 +-
 .../wireless/intel/iwlwifi/pcie/internal.h    |   2 +-
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c  |   2 +-
 .../wireless/intel/iwlwifi/pcie/trans-gen2.c  |   2 +-
 .../net/wireless/intel/iwlwifi/pcie/trans.c   | 166 +++++++++---------
 26 files changed, 433 insertions(+), 303 deletions(-)

-- 
2.20.1


             reply	other threads:[~2019-06-28  9:20 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-28  9:19 Luca Coelho [this message]
2019-06-28  9:19 ` [PATCH 01/20] iwlwifi: lib: Use struct_size() helper Luca Coelho
2019-06-28  9:19 ` [PATCH 02/20] iwlwifi: d3: " Luca Coelho
2019-06-28  9:19 ` [PATCH 03/20] iwlwifi: remove some unnecessary NULL checks Luca Coelho
2019-06-28  9:19 ` [PATCH 04/20] iwlwifi: mvm: correctly fill the ac array in the iwl_mac_ctx_cmd Luca Coelho
2019-06-28  9:19 ` [PATCH 05/20] iwlwifi: mvm: convert to FW AC when configuring MU EDCA Luca Coelho
2019-06-28  9:19 ` [PATCH 06/20] iwlwifi: fix module init error paths Luca Coelho
2019-06-28  9:19 ` [PATCH 07/20] iwlwifi: Add support for SAR South Korea limitation Luca Coelho
2019-06-28  9:19 ` [PATCH 08/20] iwlwifi: mvm: Add log information about SAR status Luca Coelho
2019-09-30 12:06   ` Matteo Croce
2019-09-30 12:12     ` Luca Coelho
2019-06-28  9:19 ` [PATCH 09/20] iwlwifi: mvm: Drop large non sta frames Luca Coelho
2019-06-28  9:19 ` [PATCH 10/20] iwlwifi: pcie: increase the size of PCI dumps Luca Coelho
2019-06-28  9:19 ` [PATCH 11/20] iwlwifi: dbg: fix debug monitor stop and restart delays Luca Coelho
2019-06-28  9:20 ` [PATCH 12/20] iwlwifi: dbg_ini: enforce apply point early on buffer allocation tlv Luca Coelho
2019-06-28  9:20 ` [PATCH 13/20] iwlwifi: dbg_ini: remove redundant checking of ini mode Luca Coelho
2019-06-28  9:20 ` [PATCH 14/20] iwlwifi: dbg: move trans debug fields to a separate struct Luca Coelho
2019-06-28  9:20 ` [PATCH 15/20] iwlwifi: support FSEQ TLV even when FMAC is not compiled Luca Coelho
2019-06-28  9:20 ` [PATCH 16/20] iwlwifi: mvm: make the usage of TWT configurable Luca Coelho
2019-06-28  9:20 ` [PATCH 17/20] iwlwifi: dbg_ini: fix debug monitor stop and restart in ini mode Luca Coelho
2019-06-28  9:20 ` [PATCH 18/20] iwlwifi: dbg: don't stop dbg recording before entering D3 from 9000 devices Luca Coelho
2019-06-28  9:20 ` [PATCH 19/20] iwlwifi: dbg: debug recording stop and restart command remove Luca Coelho
2019-06-28  9:20 ` [PATCH 20/20] iwlwifi: mvm: remove MAC_FILTER_IN_11AX for AP mode Luca Coelho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190628092008.11049-1-luca@coelho.fi \
    --to=luca@coelho.fi \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luciano.coelho@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox