From: Sven Eckelmann <sven@narfation.org>
To: linux-wireless@vger.kernel.org
Cc: Sven Eckelmann <seckelmann@datto.com>
Subject: [PATCH v6] mac80211_hwsim: Register support for HE meshpoint
Date: Tue, 13 Aug 2019 08:36:57 +0200 [thread overview]
Message-ID: <20190813063657.7544-1-sven@narfation.org> (raw)
From: Sven Eckelmann <seckelmann@datto.com>
Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. hwsim can be used to assist initial development of these
features without having access to HW.
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
---
v6:
* rebased on top of 690c4509e980 ("mac80211_hwsim: Fix a typo in the name
of function 'mac80211_hswim_he_capab()'")
* dropped incorrectly left "Forwarded" tag in commit message
* drop merged mac80211 patch
* drop ath11k patches will go to some special post-upstreaming branch and
will be submitted separately
v5-v1:
* see https://lore.kernel.org/r/20190724163359.3507-1-sven@narfation.org
The patch was checked against hostapd's tests version 05822609d105
("HE: MCS size is always a minimum of 4 bytes") and the pending tshark < 3.1.0
workaround [1]. The latter is only affecting test "wpas_mesh_max_peering".
The other patch [2] I had in my hostapd queue in earlier tests [3] was not
actually needed for hwsim+mesh.
[1] https://patchwork.ozlabs.org/patch/1131273/
[2] https://patchwork.ozlabs.org/patch/1116968/
[3] https://lore.kernel.org/r/2152977.f3ncjnVLFo@bentobox
---
drivers/net/wireless/mac80211_hwsim.c | 283 +++++++++++++++++---------
1 file changed, 189 insertions(+), 94 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index f86c2891310a..635956024e88 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2497,116 +2497,211 @@ static void hwsim_mcast_new_radio(int id, struct genl_info *info,
nlmsg_free(mcast_skb);
}
-static const struct ieee80211_sband_iftype_data he_capa_2ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_2ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xffff),
- .tx_mcs_160 = cpu_to_le16(0xffff),
- .rx_mcs_80p80 = cpu_to_le16(0xffff),
- .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
},
+#endif
};
-static const struct ieee80211_sband_iftype_data he_capa_5ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[0] =
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_5ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xfffa),
- .tx_mcs_160 = cpu_to_le16(0xfffa),
- .rx_mcs_80p80 = cpu_to_le16(0xfffa),
- .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
},
+#endif
};
static void mac80211_hwsim_he_capab(struct ieee80211_supported_band *sband)
{
- if (sband->band == NL80211_BAND_2GHZ)
+ u16 n_iftype_data;
+
+ if (sband->band == NL80211_BAND_2GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_2ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_2ghz;
- else if (sband->band == NL80211_BAND_5GHZ)
+ (struct ieee80211_sband_iftype_data *)he_capa_2ghz;
+ } else if (sband->band == NL80211_BAND_5GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_5ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_5ghz;
- else
+ (struct ieee80211_sband_iftype_data *)he_capa_5ghz;
+ } else {
return;
+ }
- sband->n_iftype_data = 1;
+ sband->n_iftype_data = n_iftype_data;
}
#ifdef CONFIG_MAC80211_MESH
--
2.20.1
next reply other threads:[~2019-08-13 6:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-13 6:36 Sven Eckelmann [this message]
2019-08-13 10:55 ` [PATCH v6] mac80211_hwsim: Register support for HE meshpoint Jouni Malinen
2019-08-13 11:20 ` Sven Eckelmann
2019-08-30 10:38 ` Johannes Berg
2019-08-30 13:37 ` Jouni Malinen
2019-08-30 13:45 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190813063657.7544-1-sven@narfation.org \
--to=sven@narfation.org \
--cc=linux-wireless@vger.kernel.org \
--cc=seckelmann@datto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).