From: Luca Coelho <luca@coelho.fi>
To: kvalo@codeaurora.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 14/21] iwlwifi: mvm: add support for single antenna diversity
Date: Tue, 3 Sep 2019 10:37:07 +0300 [thread overview]
Message-ID: <20190903073714.32278-15-luca@coelho.fi> (raw)
In-Reply-To: <20190903073714.32278-1-luca@coelho.fi>
From: Haim Dreyfuss <haim.dreyfuss@intel.com>
There are products which have a single chain with 2 antennas.
In these products, we need to inform the FW that the device has the
single antenna diversity(SAD) feature. In the future, we will read
the active antenna from a BIOS configuration. Currently, we use a
default configuration which means that the FW decides which antenna to use.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
---
drivers/net/wireless/intel/iwlwifi/cfg/22000.c | 1 +
drivers/net/wireless/intel/iwlwifi/fw/file.h | 4 ++++
drivers/net/wireless/intel/iwlwifi/iwl-config.h | 2 ++
3 files changed, 7 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
index 4ef28d916fd3..3bd03ddbe22f 100644
--- a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
+++ b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
@@ -240,6 +240,7 @@ const struct iwl_cfg iwl_ax101_cfg_qu_hr = {
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
+ .tx_with_siso_diversity = true,
};
const struct iwl_cfg iwl_ax201_cfg_qu_hr = {
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/file.h b/drivers/net/wireless/intel/iwlwifi/fw/file.h
index 00db39427be7..329b00e90fa4 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/file.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h
@@ -524,6 +524,10 @@ enum iwl_fw_phy_cfg {
FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
FW_PHY_CFG_RX_CHAIN_POS = 20,
FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
+ FW_PHY_CFG_CHAIN_SAD_POS = 23,
+ FW_PHY_CFG_CHAIN_SAD_ENABLED = 0x1 << FW_PHY_CFG_CHAIN_SAD_POS,
+ FW_PHY_CFG_CHAIN_SAD_ANT_A = 0x2 << FW_PHY_CFG_CHAIN_SAD_POS,
+ FW_PHY_CFG_CHAIN_SAD_ANT_B = 0x4 << FW_PHY_CFG_CHAIN_SAD_POS,
FW_PHY_CFG_SHARED_CLK = BIT(31),
};
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h
index 02b65e2580a3..47bd35618573 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h
@@ -379,6 +379,7 @@ struct iwl_cfg_trans_params {
* @ht_params: point to ht parameters
* @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
+ * @tx_with_siso_diversity: 1x1 device with tx antenna diversity
* @internal_wimax_coex: internal wifi/wimax combo device
* @high_temp: Is this NIC is designated to be in high temperature.
* @host_interrupt_operation_mode: device needs host interrupt operation
@@ -441,6 +442,7 @@ struct iwl_cfg {
u16 nvm_ver;
u16 nvm_calib_ver;
u32 rx_with_siso_diversity:1,
+ tx_with_siso_diversity:1,
bt_shared_single_ant:1,
internal_wimax_coex:1,
host_interrupt_operation_mode:1,
--
2.23.0.rc1
next prev parent reply other threads:[~2019-09-03 7:38 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-03 7:36 [PATCH 00/21] iwlwifi: updates intended for v5.4 2019-09-03 Luca Coelho
2019-09-03 7:36 ` [PATCH 01/21] iwlwifi: separate elements from cfg that are needed by trans_alloc Luca Coelho
2019-09-03 7:36 ` [PATCH 02/21] iwlwifi: pcie: use the cfg we passed to iwl_trans_pcie_alloc() Luca Coelho
2019-09-03 7:36 ` [PATCH 03/21] iwlwifi: pcie: move some cfg mangling from trans_pcie_alloc to probe Luca Coelho
2019-09-03 7:36 ` [PATCH 04/21] iwlwifi: pcie: set iwl_trans->cfg later in the probe function Luca Coelho
2019-09-03 7:36 ` [PATCH 05/21] iwlwifi: pass the iwl_config_trans_params when needed Luca Coelho
2019-09-03 7:36 ` [PATCH 06/21] iwlwifi: add a pointer to the trans_cfg directly in trans Luca Coelho
2019-09-03 7:37 ` [PATCH 07/21] iwlwifi: pass the iwl_trans instead of cfg to some functions Luca Coelho
2019-09-03 7:37 ` [PATCH 08/21] iwlwifi: always access the trans configuration via trans Luca Coelho
2019-09-03 7:37 ` [PATCH 09/21] iwlwifi: fix warning iwl-trans.h is included more than once Luca Coelho
2019-09-03 7:37 ` [PATCH 10/21] iwlwifi: add support for suspend-resume flow for new device generation Luca Coelho
2019-09-03 7:37 ` [PATCH 11/21] iwlwifi: add sta_id to WOWLAN_CONFIG_CMD Luca Coelho
2019-09-03 7:37 ` [PATCH 12/21] iwlwifi: mvm: drop BA sessions on too many old-SN frames Luca Coelho
2019-09-03 7:37 ` [PATCH 13/21] iwlwifi: mvm: handle BAR_FRAME_RELEASE (0xc2) notification Luca Coelho
2019-09-03 7:37 ` Luca Coelho [this message]
2019-09-03 7:37 ` [PATCH 15/21] iwlwifi: mvm: don't log un-decrypted frames Luca Coelho
2019-09-03 7:37 ` [PATCH 16/21] iwlwifi: add iwl_tlv_array_len() Luca Coelho
2019-09-03 7:37 ` [PATCH 17/21] iwlwifi: dbg_ini: remove apply point, switch to time point API Luca Coelho
2019-09-03 7:37 ` [PATCH 18/21] iwlwifi: fw api: add DRAM buffer allocation command Luca Coelho
2019-09-03 7:37 ` [PATCH 19/21] iwlwifi: dbg_ini: fix dump structs doc Luca Coelho
2019-09-03 7:37 ` [PATCH 20/21] iwlwifi: dbg_ini: remove periodic trigger Luca Coelho
2019-09-03 7:37 ` [PATCH 21/21] iwlwifi: dbg: remove iwl_fw_cancel_dumps function Luca Coelho
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190903073714.32278-15-luca@coelho.fi \
--to=luca@coelho.fi \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox