linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Felix Fietkau <nbd@nbd.name>, Kalle Valo <kvalo@codeaurora.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.14 015/103] ath9k: fix tx99 with monitor mode interface
Date: Fri,  8 Nov 2019 06:41:40 -0500	[thread overview]
Message-ID: <20191108114310.14363-15-sashal@kernel.org> (raw)
In-Reply-To: <20191108114310.14363-1-sashal@kernel.org>

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit d9c52fd17cb483bd8a470398afcb79f86c1b77c8 ]

Tx99 is typically configured via a monitor mode interface, which does
not get added to the driver as a vif. Since the code currently expects
a configured virtual interface for tx99, enabling tx99 via debugfs fails.
Since the vif is not needed anyway, remove all checks for it.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
[kvalo@codeaurora.org: s/CPTCFG/CONFIG/]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  1 -
 drivers/net/wireless/ath/ath9k/main.c  | 12 +++---------
 drivers/net/wireless/ath/ath9k/tx99.c  |  9 ---------
 drivers/net/wireless/ath/ath9k/xmit.c  |  2 +-
 4 files changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index f9339b5c3624b..db2b119199d7b 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -1074,7 +1074,6 @@ struct ath_softc {
 
 	struct ath_spec_scan_priv spec_priv;
 
-	struct ieee80211_vif *tx99_vif;
 	struct sk_buff *tx99_skb;
 	bool tx99_state;
 	s16 tx99_power;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 8b4ac7f0a09b7..055f869516804 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1250,15 +1250,10 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	struct ath_vif *avp = (void *)vif->drv_priv;
 	struct ath_node *an = &avp->mcast_node;
 
-	mutex_lock(&sc->mutex);
+	if (IS_ENABLED(CONFIG_ATH9K_TX99))
+		return -EOPNOTSUPP;
 
-	if (IS_ENABLED(CONFIG_ATH9K_TX99)) {
-		if (sc->cur_chan->nvifs >= 1) {
-			mutex_unlock(&sc->mutex);
-			return -EOPNOTSUPP;
-		}
-		sc->tx99_vif = vif;
-	}
+	mutex_lock(&sc->mutex);
 
 	ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
 	sc->cur_chan->nvifs++;
@@ -1341,7 +1336,6 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	ath9k_p2p_remove_vif(sc, vif);
 
 	sc->cur_chan->nvifs--;
-	sc->tx99_vif = NULL;
 	if (!ath9k_is_chanctx_enabled())
 		list_del(&avp->list);
 
diff --git a/drivers/net/wireless/ath/ath9k/tx99.c b/drivers/net/wireless/ath/ath9k/tx99.c
index fe3a8263b2241..311547f532bc3 100644
--- a/drivers/net/wireless/ath/ath9k/tx99.c
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -54,12 +54,6 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_tx_info *tx_info;
 	struct sk_buff *skb;
-	struct ath_vif *avp;
-
-	if (!sc->tx99_vif)
-		return NULL;
-
-	avp = (struct ath_vif *)sc->tx99_vif->drv_priv;
 
 	skb = alloc_skb(len, GFP_KERNEL);
 	if (!skb)
@@ -77,14 +71,11 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
 	memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
 	memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
 
-	hdr->seq_ctrl |= cpu_to_le16(avp->seq_no);
-
 	tx_info = IEEE80211_SKB_CB(skb);
 	memset(tx_info, 0, sizeof(*tx_info));
 	rate = &tx_info->control.rates[0];
 	tx_info->band = sc->cur_chan->chandef.chan->band;
 	tx_info->flags = IEEE80211_TX_CTL_NO_ACK;
-	tx_info->control.vif = sc->tx99_vif;
 	rate->count = 1;
 	if (ah->curchan && IS_CHAN_HT(ah->curchan)) {
 		rate->flags |= IEEE80211_TX_RC_MCS;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 458c4f53ba5d1..a743e3535d0a8 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2952,7 +2952,7 @@ int ath9k_tx99_send(struct ath_softc *sc, struct sk_buff *skb,
 		return -EINVAL;
 	}
 
-	ath_set_rates(sc->tx99_vif, NULL, bf);
+	ath_set_rates(NULL, NULL, bf);
 
 	ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
 	ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
-- 
2.20.1


  parent reply	other threads:[~2019-11-08 12:01 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20191108114310.14363-1-sashal@kernel.org>
2019-11-08 11:41 ` [PATCH AUTOSEL 4.14 003/103] ath10k: fix kernel panic by moving pci flush after napi_disable Sasha Levin
2019-11-08 11:41 ` [PATCH AUTOSEL 4.14 013/103] cfg80211: Avoid regulatory restore when COUNTRY_IE_IGNORE is set Sasha Levin
2019-11-08 11:41 ` Sasha Levin [this message]
2019-11-08 11:41 ` [PATCH AUTOSEL 4.14 016/103] ath10k: limit available channels via DT ieee80211-freq-limit Sasha Levin
2019-11-08 11:41 ` [PATCH AUTOSEL 4.14 028/103] iwlwifi: don't WARN on trying to dump dead firmware Sasha Levin
2019-11-08 11:41 ` [PATCH AUTOSEL 4.14 029/103] iwlwifi: mvm: avoid sending too many BARs Sasha Levin
2019-11-08 11:41 ` [PATCH AUTOSEL 4.14 032/103] rtl8187: Fix warning generated when strncpy() destination length matches the sixe argument Sasha Levin
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 042/103] ath10k: wmi: disable softirq's while calling ieee80211_rx Sasha Levin
2019-11-08 11:42 ` [PATCH AUTOSEL 4.14 062/103] ath9k: add back support for using active monitor interfaces for tx99 Sasha Levin
2019-11-08 11:43 ` [PATCH AUTOSEL 4.14 103/103] ath9k: Fix a locking bug in ath9k_add_interface() Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191108114310.14363-15-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=nbd@nbd.name \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).