From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 2/4] mt7615: replace sta_state callback with sta_add/sta_remove
Date: Fri, 13 Dec 2019 22:36:26 +0100 [thread overview]
Message-ID: <20191213213628.73840-2-nbd@nbd.name> (raw)
In-Reply-To: <20191213213628.73840-1-nbd@nbd.name>
The MT7615 firmware needs to know the association id at creation time,
which is unavailable during the transition from notexist to none in
.sta_state.
This can cause a number of issues, probably also breaking powersave
support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
.../net/wireless/mediatek/mt76/mt7615/main.c | 38 ++++++++++++-------
.../wireless/mediatek/mt76/mt7615/mt7615.h | 8 ++--
.../net/wireless/mediatek/mt76/mt7615/pci.c | 5 +--
3 files changed, 29 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index c6a0ca1034c0..d759f009599b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -434,8 +434,8 @@ mt7615_channel_switch_beacon(struct ieee80211_hw *hw,
mutex_unlock(&dev->mt76.mutex);
}
-int mt7615_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta)
+int mt7615_mac_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
{
struct mt7615_dev *dev = container_of(mdev, struct mt7615_dev, mt76);
struct mt7615_sta *msta = (struct mt7615_sta *)sta->drv_priv;
@@ -455,21 +455,14 @@ int mt7615_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
mt7615_mcu_add_wtbl(dev, vif, sta);
mt7615_mcu_set_sta_rec(dev, vif, sta, 1);
+ if (sta->ht_cap.ht_supported)
+ mt7615_mcu_set_ht_cap(dev, vif, sta);
return 0;
}
-void mt7615_sta_assoc(struct mt76_dev *mdev, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta)
-{
- struct mt7615_dev *dev = container_of(mdev, struct mt7615_dev, mt76);
-
- if (sta->ht_cap.ht_supported)
- mt7615_mcu_set_ht_cap(dev, vif, sta);
-}
-
-void mt7615_sta_remove(struct mt76_dev *mdev, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta)
+void mt7615_mac_sta_remove(struct mt76_dev *mdev, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
{
struct mt7615_dev *dev = container_of(mdev, struct mt7615_dev, mt76);
struct mt7615_sta *msta = (struct mt7615_sta *)sta->drv_priv;
@@ -605,6 +598,22 @@ mt7615_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
return ret;
}
+static int
+mt7615_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ return mt76_sta_state(hw, vif, sta, IEEE80211_STA_NOTEXIST,
+ IEEE80211_STA_NONE);
+}
+
+static int
+mt7615_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ return mt76_sta_state(hw, vif, sta, IEEE80211_STA_NONE,
+ IEEE80211_STA_NOTEXIST);
+}
+
const struct ieee80211_ops mt7615_ops = {
.tx = mt7615_tx,
.start = mt7615_start,
@@ -615,7 +624,8 @@ const struct ieee80211_ops mt7615_ops = {
.conf_tx = mt7615_conf_tx,
.configure_filter = mt7615_configure_filter,
.bss_info_changed = mt7615_bss_info_changed,
- .sta_state = mt76_sta_state,
+ .sta_add = mt7615_sta_add,
+ .sta_remove = mt7615_sta_remove,
.set_key = mt7615_set_key,
.ampdu_action = mt7615_ampdu_action,
.set_rts_threshold = mt7615_set_rts_threshold,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index b4d6727cf285..4fe6dc60e0cd 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -313,12 +313,10 @@ void mt7615_tx_complete_skb(struct mt76_dev *mdev, enum mt76_txq_id qid,
void mt7615_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,
struct sk_buff *skb);
void mt7615_sta_ps(struct mt76_dev *mdev, struct ieee80211_sta *sta, bool ps);
-int mt7615_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta);
-void mt7615_sta_assoc(struct mt76_dev *mdev, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta);
-void mt7615_sta_remove(struct mt76_dev *mdev, struct ieee80211_vif *vif,
+int mt7615_mac_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
struct ieee80211_sta *sta);
+void mt7615_mac_sta_remove(struct mt76_dev *mdev, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta);
void mt7615_mac_work(struct work_struct *work);
void mt7615_txp_skb_unmap(struct mt76_dev *dev,
struct mt76_txwi_cache *txwi);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci.c
index dd9ee80dbef7..7e3556c3b6eb 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci.c
@@ -81,9 +81,8 @@ static int mt7615_pci_probe(struct pci_dev *pdev,
.rx_skb = mt7615_queue_rx_skb,
.rx_poll_complete = mt7615_rx_poll_complete,
.sta_ps = mt7615_sta_ps,
- .sta_add = mt7615_sta_add,
- .sta_assoc = mt7615_sta_assoc,
- .sta_remove = mt7615_sta_remove,
+ .sta_add = mt7615_mac_sta_add,
+ .sta_remove = mt7615_mac_sta_remove,
.update_survey = mt7615_update_channel,
};
struct mt7615_dev *dev;
--
2.24.0
next prev parent reply other threads:[~2019-12-13 21:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-13 21:36 [PATCH 1/4] mt76: mt7615: defer mcu initialization via workqueue Felix Fietkau
2019-12-13 21:36 ` Felix Fietkau [this message]
2019-12-13 21:36 ` [PATCH 3/4] mt76: fix rx dma ring descriptor state on reset Felix Fietkau
2019-12-13 21:36 ` [PATCH 4/4] mt76: disable bh in mt76_dma_rx_poll Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191213213628.73840-2-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox