From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 1/4] mt76: mt7615: measure channel noise and report it via survey
Date: Sun, 22 Dec 2019 16:07:14 +0100 [thread overview]
Message-ID: <20191222150717.51379-1-nbd@nbd.name> (raw)
Read measurements every 100 ms and build a simple moving average
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
drivers/net/wireless/mediatek/mt76/mac80211.c | 4 ++
drivers/net/wireless/mediatek/mt76/mt76.h | 2 +
.../net/wireless/mediatek/mt76/mt7615/mac.c | 42 +++++++++++++++++++
.../net/wireless/mediatek/mt76/mt7615/main.c | 3 ++
.../wireless/mediatek/mt76/mt7615/mt7615.h | 3 ++
.../net/wireless/mediatek/mt76/mt7615/regs.h | 6 +++
6 files changed, 60 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mac80211.c b/drivers/net/wireless/mediatek/mt76/mac80211.c
index 0c71d671f29a..cd9a3882cb9d 100644
--- a/drivers/net/wireless/mediatek/mt76/mac80211.c
+++ b/drivers/net/wireless/mediatek/mt76/mac80211.c
@@ -617,6 +617,9 @@ int mt76_get_survey(struct ieee80211_hw *hw, int idx,
survey->channel = chan;
survey->filled = SURVEY_INFO_TIME | SURVEY_INFO_TIME_BUSY;
survey->filled |= dev->drv->survey_flags;
+ if (state->noise)
+ survey->filled |= SURVEY_INFO_NOISE_DBM;
+
if (chan == phy->main_chan) {
survey->filled |= SURVEY_INFO_IN_USE;
@@ -627,6 +630,7 @@ int mt76_get_survey(struct ieee80211_hw *hw, int idx,
survey->time_busy = div_u64(state->cc_busy, 1000);
survey->time_rx = div_u64(state->cc_rx, 1000);
survey->time = div_u64(state->cc_active, 1000);
+ survey->noise = state->noise;
spin_lock_bh(&dev->cc_lock);
survey->time_bss_rx = div_u64(state->cc_bss_rx, 1000);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index f819d9e4ff5f..217f8c5ad201 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -328,6 +328,8 @@ struct mt76_channel_state {
u64 cc_rx;
u64 cc_bss_rx;
u64 cc_tx;
+
+ s8 noise;
};
struct mt76_sband {
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 903b8395a446..1b52d8b79496 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -1379,6 +1379,19 @@ void mt7615_mac_set_scs(struct mt7615_dev *dev, bool enable)
mutex_unlock(&dev->mt76.mutex);
}
+void mt7615_mac_enable_nf(struct mt7615_dev *dev, bool ext_phy)
+{
+ u32 rxtd;
+
+ if (ext_phy)
+ rxtd = MT_WF_PHY_RXTD2(10);
+ else
+ rxtd = MT_WF_PHY_RXTD(12);
+
+ mt76_set(dev, rxtd, BIT(18) | BIT(29));
+ mt76_set(dev, MT_WF_PHY_R0_PHYMUX_5(ext_phy), 0x5 << 12);
+}
+
void mt7615_mac_cca_stats_reset(struct mt7615_phy *phy)
{
struct mt7615_dev *dev = phy->dev;
@@ -1511,13 +1524,35 @@ mt7615_mac_scs_check(struct mt7615_phy *phy)
mt7615_mac_set_default_sensitivity(phy);
}
+static u8
+mt7615_phy_get_nf(struct mt7615_dev *dev, int idx)
+{
+ static const u8 nf_power[] = { 92, 89, 86, 83, 80, 75, 70, 65, 60, 55, 52 };
+ u32 reg = idx ? MT_WF_PHY_RXTD2(17) : MT_WF_PHY_RXTD(20);
+ u32 val, sum = 0, n = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(nf_power); i++, reg += 4) {
+ val = mt76_rr(dev, reg);
+ sum += val * nf_power[i];
+ n += val;
+ }
+
+ if (!n)
+ return 0;
+
+ return sum / n;
+}
+
static void
mt7615_phy_update_channel(struct mt76_phy *mphy, int idx)
{
struct mt7615_dev *dev = container_of(mphy->dev, struct mt7615_dev, mt76);
+ struct mt7615_phy *phy = mphy->priv;
struct mt76_channel_state *state;
u64 busy_time, tx_time, rx_time, obss_time;
u32 obss_reg = idx ? MT_WF_RMAC_MIB_TIME6 : MT_WF_RMAC_MIB_TIME5;
+ int nf;
busy_time = mt76_get_field(dev, MT_MIB_SDR9(idx),
MT_MIB_SDR9_BUSY_MASK);
@@ -1527,11 +1562,18 @@ mt7615_phy_update_channel(struct mt76_phy *mphy, int idx)
MT_MIB_SDR37_RXTIME_MASK);
obss_time = mt76_get_field(dev, obss_reg, MT_MIB_OBSSTIME_MASK);
+ nf = mt7615_phy_get_nf(dev, idx);
+ if (!phy->noise)
+ phy->noise = nf << 4;
+ else if (nf)
+ phy->noise += nf - (phy->noise >> 4);
+
state = mphy->chan_state;
state->cc_busy += busy_time;
state->cc_tx += tx_time;
state->cc_rx += rx_time + obss_time;
state->cc_bss_rx += rx_time;
+ state->noise = -(phy->noise >> 4);
}
void mt7615_update_channel(struct mt76_dev *mdev)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 4ffa920d4f4d..2a85859da754 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -40,11 +40,13 @@ static int mt7615_start(struct ieee80211_hw *hw)
if (!running) {
mt7615_mcu_ctrl_pm_state(dev, 0, 0);
mt7615_mcu_set_mac_enable(dev, 0, true);
+ mt7615_mac_enable_nf(dev, 0);
}
if (phy != &dev->phy) {
mt7615_mcu_ctrl_pm_state(dev, 1, 0);
mt7615_mcu_set_mac_enable(dev, 1, true);
+ mt7615_mac_enable_nf(dev, 1);
}
set_bit(MT76_STATE_RUNNING, &phy->mt76->state);
@@ -238,6 +240,7 @@ static int mt7615_set_channel(struct mt7615_phy *phy)
mt7615_mac_cca_stats_reset(phy);
mt7615_mac_reset_counters(dev);
+ phy->noise = 0;
out:
clear_bit(MT76_RESET, &phy->mt76->state);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 48810eda1cd6..eaafae9cc279 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -94,6 +94,8 @@ struct mt7615_phy {
u32 rxfilter;
u32 omac_mask;
+ u16 noise;
+
unsigned long last_cca_adj;
int false_cca_ofdm, false_cca_cck;
s8 ofdm_sensitivity;
@@ -288,6 +290,7 @@ bool mt7615_mac_wtbl_update(struct mt7615_dev *dev, int idx, u32 mask);
void mt7615_mac_reset_counters(struct mt7615_dev *dev);
void mt7615_mac_cca_stats_reset(struct mt7615_phy *phy);
void mt7615_mac_set_scs(struct mt7615_dev *dev, bool enable);
+void mt7615_mac_enable_nf(struct mt7615_dev *dev, bool ext_phy);
void mt7615_mac_sta_poll(struct mt7615_dev *dev);
int mt7615_mac_write_txwi(struct mt7615_dev *dev, __le32 *txwi,
struct sk_buff *skb, struct mt76_wcid *wcid,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/regs.h b/drivers/net/wireless/mediatek/mt76/mt7615/regs.h
index 26d121646787..46db0faae93d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/regs.h
@@ -104,6 +104,9 @@
#define MT_WF_PHY_B1_PD_OFDM(v) ((v) << 16)
#define MT_WF_PHY_B1_PD_BLK BIT(25)
+#define MT_WF_PHY_RXTD_BASE MT_WF_PHY(0x2200)
+#define MT_WF_PHY_RXTD(_n) (MT_WF_PHY_RXTD_BASE + ((_n) << 2))
+
#define MT_WF_PHY_B0_RXTD_CCK_PD MT_WF_PHY(0x2310)
#define MT_WF_PHY_B0_PD_CCK_MASK GENMASK(8, 1)
#define MT_WF_PHY_B0_PD_CCK(v) ((v) << 1)
@@ -112,6 +115,9 @@
#define MT_WF_PHY_B1_PD_CCK_MASK GENMASK(31, 24)
#define MT_WF_PHY_B1_PD_CCK(v) ((v) << 24)
+#define MT_WF_PHY_RXTD2_BASE MT_WF_PHY(0x2a00)
+#define MT_WF_PHY_RXTD2(_n) (MT_WF_PHY_RXTD2_BASE + ((_n) << 2))
+
#define MT_WF_CFG_BASE 0x20200
#define MT_WF_CFG(ofs) (MT_WF_CFG_BASE + (ofs))
--
2.24.0
next reply other threads:[~2019-12-22 15:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-22 15:07 Felix Fietkau [this message]
2019-12-22 15:07 ` [PATCH 2/4] mt76: mt7615: increase MCU command timeout Felix Fietkau
2019-12-22 15:07 ` [PATCH 3/4] mt76: mt7603: fix input validation issues for powersave-filtered frames Felix Fietkau
2019-12-22 15:07 ` [PATCH 4/4] mt76: clear skb pointers from rx aggregation reorder buffer during cleanup Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191222150717.51379-1-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox