[PATCH AUTOSEL 5.4 023/205] rtw88: fix error handling when setup efuse info

[Sasha Levin <sashal@kernel.org>]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit f4268729eb1eefe23f6746849c1b5626d9030532 ]

Disable efuse if the efuse is enabled when we failed to setup the efuse
information, otherwise the hardware will not turn off.

Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 7a3a4911bde2..806af37192bc 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1048,19 +1048,19 @@ static int rtw_chip_efuse_info_setup(struct rtw_dev *rtwdev)
 	/* power on mac to read efuse */
 	ret = rtw_chip_efuse_enable(rtwdev);
 	if (ret)
-		goto out;
+		goto out_unlock;
 
 	ret = rtw_parse_efuse_map(rtwdev);
 	if (ret)
-		goto out;
+		goto out_disable;
 
 	ret = rtw_dump_hw_feature(rtwdev);
 	if (ret)
-		goto out;
+		goto out_disable;
 
 	ret = rtw_check_supported_rfe(rtwdev);
 	if (ret)
-		goto out;
+		goto out_disable;
 
 	if (efuse->crystal_cap == 0xff)
 		efuse->crystal_cap = 0;
@@ -1087,9 +1087,10 @@ static int rtw_chip_efuse_info_setup(struct rtw_dev *rtwdev)
 	efuse->ext_pa_5g = efuse->pa_type_5g & BIT(0) ? 1 : 0;
 	efuse->ext_lna_2g = efuse->lna_type_5g & BIT(3) ? 1 : 0;
 
+out_disable:
 	rtw_chip_efuse_disable(rtwdev);
 
-out:
+out_unlock:
 	mutex_unlock(&rtwdev->mutex);
 	return ret;
 }
-- 
2.20.1