From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Ryder Lee <ryder.lee@mediatek.com>
Cc: Felix Fietkau <nbd@nbd.name>,
Lorenzo Bianconi <lorenzo.bianconi@redhat.com>,
Shayne Chen <shayne.chen@mediatek.com>,
Roy Luo <royluo@google.com>, Sean Wang <sean.wang@mediatek.com>,
linux-wireless@vger.kernel.org,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH 1/7] mt76: mt7615: simplify mcu_set_bmc flow
Date: Tue, 21 Jan 2020 16:11:05 +0100 [thread overview]
Message-ID: <20200121151105.GA2396@localhost.localdomain> (raw)
In-Reply-To: <ae72dd289f8a26a2c0f42de1f940bb8b6d1f2c29.1579237414.git.ryder.lee@mediatek.com>
[-- Attachment #1: Type: text/plain, Size: 4671 bytes --]
> Move mcu_wtbl_bmc into mcu_set_sta_rec_bmc to simplify flow.
>
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
> .../net/wireless/mediatek/mt76/mt7615/main.c | 3 +-
> .../net/wireless/mediatek/mt76/mt7615/mcu.c | 97 ++++++++-----------
> .../wireless/mediatek/mt76/mt7615/mt7615.h | 6 +-
> 3 files changed, 45 insertions(+), 61 deletions(-)
>
[...]
> -int mt7615_mcu_set_sta_rec_bmc(struct mt7615_dev *dev,
> - struct ieee80211_vif *vif, bool en)
> +int mt7615_mcu_set_bmc(struct mt7615_dev *dev,
> + struct ieee80211_vif *vif, bool en)
> {
> struct mt7615_vif *mvif = (struct mt7615_vif *)vif->drv_priv;
> struct {
> struct sta_req_hdr hdr;
> struct sta_rec_basic basic;
> - } req = {
> + u8 buf[MT7615_WTBL_UPDATE_MAX_SIZE];
> + } __packed req = {
> .hdr = {
> .bss_idx = mvif->idx,
> .wlan_idx = mvif->sta.wcid.idx,
> @@ -1109,8 +1059,18 @@ int mt7615_mcu_set_sta_rec_bmc(struct mt7615_dev *dev,
> .conn_type = cpu_to_le32(CONNECTION_INFRA_BC),
> },
> };
> + struct wtbl_req_hdr *wtbl_hdr;
> + struct wtbl_generic *wtbl_g;
> + struct wtbl_rx *wtbl_rx;
> + u8 *buf = req.buf;
> +
> eth_broadcast_addr(req.basic.peer_addr);
>
> + wtbl_hdr = (struct wtbl_req_hdr *)buf;
> + buf += sizeof(*wtbl_hdr);
> + wtbl_hdr->wlan_idx = mvif->sta.wcid.idx;
> + wtbl_hdr->operation = WTBL_RESET_AND_SET;
> +
> if (en) {
> req.basic.conn_state = CONN_STATE_PORT_SECURE;
> req.basic.extra_info = cpu_to_le16(EXTRA_INFO_VER |
> @@ -1118,10 +1078,37 @@ int mt7615_mcu_set_sta_rec_bmc(struct mt7615_dev *dev,
> } else {
> req.basic.conn_state = CONN_STATE_DISCONNECT;
> req.basic.extra_info = cpu_to_le16(EXTRA_INFO_VER);
> +
> + __mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_STA_REC_UPDATE,
> + &req, (u8 *)wtbl_hdr - (u8 *)&req, true);
we need to check the return value from __mt76_mcu_send_msg here.
Moreover, here (u8 *)wtbl_hdr - (u8 *)&req is
sizeof(struct sta_req_hdr) + sizeof(struct sta_rec_basic), right?
I guess it would be easier to understand if we explicit the length, what do you think?
> +
> + return __mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_WTBL_UPDATE,
> + (u8 *)wtbl_hdr, buf - (u8 *)wtbl_hdr,
> + true);
> }
>
> + wtbl_g = (struct wtbl_generic *)buf;
> + buf += sizeof(*wtbl_g);
> + wtbl_g->tag = cpu_to_le16(WTBL_GENERIC);
> + wtbl_g->len = cpu_to_le16(sizeof(*wtbl_g));
> + wtbl_g->muar_idx = 0xe;
> + eth_broadcast_addr(wtbl_g->peer_addr);
> +
> + wtbl_rx = (struct wtbl_rx *)buf;
> + buf += sizeof(*wtbl_rx);
> + wtbl_rx->tag = cpu_to_le16(WTBL_RX);
> + wtbl_rx->len = cpu_to_le16(sizeof(*wtbl_rx));
> + wtbl_rx->rv = 1;
> + wtbl_rx->rca1 = 1;
> + wtbl_rx->rca2 = 1;
> +
> + wtbl_hdr->tlv_num = cpu_to_le16(2);
> +
> + __mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_WTBL_UPDATE,
> + (u8 *)wtbl_hdr, buf - (u8 *)wtbl_hdr, true);
we need to check the return value from __mt76_mcu_send_msg here
> +
> return __mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_STA_REC_UPDATE,
> - &req, sizeof(req), true);
> + &req, (u8 *)wtbl_hdr - (u8 *)&req, true);
same here about the length.
Regards,
Lorenzo
> }
>
> int mt7615_mcu_set_sta_rec(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
> index eaafae9cc279..84949256601f 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
> @@ -241,14 +241,12 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> void mt7615_mac_set_rates(struct mt7615_phy *phy, struct mt7615_sta *sta,
> struct ieee80211_tx_rate *probe_rate,
> struct ieee80211_tx_rate *rates);
> -int mt7615_mcu_wtbl_bmc(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> - bool enable);
> int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> struct ieee80211_sta *sta);
> int mt7615_mcu_del_wtbl(struct mt7615_dev *dev, struct ieee80211_sta *sta);
> int mt7615_mcu_del_wtbl_all(struct mt7615_dev *dev);
> -int mt7615_mcu_set_sta_rec_bmc(struct mt7615_dev *dev,
> - struct ieee80211_vif *vif, bool en);
> +int mt7615_mcu_set_bmc(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> + bool en);
> int mt7615_mcu_set_sta_rec(struct mt7615_dev *dev, struct ieee80211_vif *vif,
> struct ieee80211_sta *sta, bool en);
> int mt7615_mcu_set_bcn(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
> --
> 2.18.0
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2020-01-21 15:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-21 14:13 [PATCH 1/7] mt76: mt7615: simplify mcu_set_bmc flow Ryder Lee
2020-01-21 14:13 ` [PATCH 2/7] mt76: mt7615: simplify mcu_set_sta flow Ryder Lee
2020-01-21 14:13 ` [PATCH 3/7] mt76: mt7615: add a helper to encapsulate sta_rec operation Ryder Lee
2020-01-21 14:13 ` [PATCH 4/7] mt76: mt7615: adjust command flow for firmware v2 Ryder Lee
2020-01-21 14:13 ` [PATCH 5/7] mt76: mt7615: add a tag sta_rec_wtbl for v2 firmware Ryder Lee
2020-01-21 14:13 ` [PATCH 6/7] mt76: mt7615: switch mt7615_mcu_set_tx_ba to new MCU format Ryder Lee
2020-01-21 14:13 ` [PATCH 7/7] mt76: mt7615: switch mt7615_mcu_set_rx_ba " Ryder Lee
2020-01-21 15:11 ` Lorenzo Bianconi [this message]
2020-01-21 16:00 ` [PATCH 1/7] mt76: mt7615: simplify mcu_set_bmc flow Ryder Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200121151105.GA2396@localhost.localdomain \
--to=lorenzo@kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=nbd@nbd.name \
--cc=royluo@google.com \
--cc=ryder.lee@mediatek.com \
--cc=sean.wang@mediatek.com \
--cc=shayne.chen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox