From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Cc: devicetree@vger.kernel.org
Subject: [PATCH 01/15] dt-bindings: net: wireless: mt76: document bindings for MT7622
Date: Thu, 30 Jan 2020 15:47:04 +0100 [thread overview]
Message-ID: <20200130144718.14298-1-nbd@nbd.name> (raw)
MT7622 is a SoC that includes a 2.4 GHz 4x4 802.11n WMAC. Its
feature set is comparable to a MT7615 chip, but limited to 2.4 GHz.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
.../bindings/net/wireless/mediatek,mt76.txt | 26 ++++++++++++++++---
1 file changed, 23 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
index d4d982f7ab37..3a76d8faaaed 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt
@@ -4,13 +4,21 @@ This node provides properties for configuring the MediaTek mt76xx wireless
device. The node is expected to be specified as a child node of the PCI
controller to which the wireless chip is connected.
-Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC.
-For SoC, use the compatible string "mediatek,mt7628-wmac" and the following
-properties:
+Alternatively, it can specify the wireless part of the MT7628/MT7688 or
+MT7622 SoC. For SoC, use the following compatible strings:
+
+compatible:
+- "mediatek,mt7628-wmac" for MT7628/MT7688
+- "mediatek,mt7622-wmac" for MT7622
+properties:
- reg: Address and length of the register set for the device.
- interrupts: Main device interrupt
+MT7622 specific properties:
+- power-domains: phandle to the power domain that the WMAC is part of
+- mediatek,infracfg: phandle to the infrastructure bus fabric syscon node
+
Optional properties:
- ieee80211-freq-limit: See ieee80211.txt
@@ -53,3 +61,15 @@ wmac: wmac@10300000 {
mediatek,mtd-eeprom = <&factory 0x0000>;
};
+
+MT7622 example:
+
+wmac: wmac@18000000 {
+ compatible = "mediatek,mt7622-wmac";
+ reg = <0 0x18000000 0 0x100000>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+
+ mediatek,infracfg = <&infracfg>;
+
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+};
--
2.24.0
next reply other threads:[~2020-01-30 14:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-30 14:47 Felix Fietkau [this message]
2020-01-30 14:47 ` [PATCH 02/15] mt76: mt7615: add __aligned(4) to txp structs Felix Fietkau
2020-01-30 14:47 ` [PATCH 03/15] mt76: mt7615: move mmio related code from pci.c to mmio.c Felix Fietkau
2020-01-30 14:47 ` [PATCH 04/15] mt76: mt7615: split up firmware loading functions Felix Fietkau
2020-01-30 14:47 ` [PATCH 05/15] mt76: mt7615: store N9 firmware version instead of CR4 Felix Fietkau
2020-01-30 14:47 ` [PATCH 06/15] mt76: mt7615: fix MT_INT_TX_DONE_ALL definition for MT7622 Felix Fietkau
2020-01-30 14:47 ` [PATCH 07/15] mt76: mt7615: add dma and tx queue initialization " Felix Fietkau
2020-01-30 14:47 ` [PATCH 08/15] mt76: mt7615: add eeprom support " Felix Fietkau
2020-01-30 14:47 ` [PATCH 09/15] mt76: mt7615: add calibration free " Felix Fietkau
2020-01-30 14:47 ` [PATCH 10/15] mt76: mt7615: disable 5 GHz on MT7622 Felix Fietkau
2020-01-30 14:47 ` [PATCH 11/15] mt76: mt7615: implement probing and firmware loading " Felix Fietkau
2020-01-30 14:47 ` [PATCH 12/15] mt76: mt7615: implement DMA support for MT7622 Felix Fietkau
2020-01-30 14:47 ` [PATCH 13/15] mt76: mt7615: decrease rx ring size " Felix Fietkau
2020-01-30 14:47 ` [PATCH 14/15] mt76: mt7615: disable DBDC on MT7622 Felix Fietkau
2020-01-30 14:47 ` [PATCH 15/15] mt76: mt7615: add Kconfig entry for MT7622 Felix Fietkau
2020-02-06 18:22 ` [PATCH 01/15] dt-bindings: net: wireless: mt76: document bindings " Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200130144718.14298-1-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=devicetree@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox