[RFC PATCH 3/4] cfg80211: add support for TID specific AMSDU configuration

[Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>]

This patch adds support to control per TID MSDU aggregation
using the NL80211_TID_CONFIG_ATTR_AMSDU_CTRL attribute.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
---
 include/net/cfg80211.h       |  4 +++-
 include/uapi/linux/nl80211.h | 10 +++++++---
 net/wireless/nl80211.c       |  6 ++++++
 3 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 6ff2646ed5fa..6dfae972730c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -636,8 +636,9 @@ struct cfg80211_chan_def {
  * @noack: noack configuration value for the TID
  * @retry_long: retry count value
  * @retry_short: retry count value
- * @ampdu: Enable/Disable aggregation
+ * @ampdu: Enable/Disable MPDU aggregation
  * @rtscts: Enable/Disable RTS/CTS
+ * @amsdu: Enable/Disable MSDU aggregation
  */
 struct cfg80211_tid_cfg {
 	bool config_override;
@@ -647,6 +648,7 @@ struct cfg80211_tid_cfg {
 	u8 retry_long, retry_short;
 	enum nl80211_tid_config ampdu;
 	enum nl80211_tid_config rtscts;
+	enum nl80211_tid_config amsdu;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 2b691161830f..1bf34a39c776 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4828,12 +4828,15 @@ enum nl80211_tid_config {
  *	&NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
  *	the max value is advertised by the driver in this attribute on
  *	output in wiphy capabilities.
- * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs
- *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using
- *	the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
+ *	Its type is u8, using the values from &nl80211_tid_config.
  * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
  *	specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
  *	the values from &nl80211_tid_config.
+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation
+ *	for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
+ *	Its type is u8, using the values from &nl80211_tid_config.
  */
 enum nl80211_tid_config_attr {
 	__NL80211_TID_CONFIG_ATTR_INVALID,
@@ -4847,6 +4850,7 @@ enum nl80211_tid_config_attr {
 	NL80211_TID_CONFIG_ATTR_RETRY_LONG,
 	NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
 	NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
+	NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
 
 	/* keep last */
 	__NL80211_TID_CONFIG_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 692bcd35f809..ea0e588b6f6a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -14104,6 +14104,12 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
 			nla_get_u8(attrs[NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL]);
 	}
 
+	if (attrs[NL80211_TID_CONFIG_ATTR_AMSDU_CTRL]) {
+		tid_conf->mask |= BIT(NL80211_TID_CONFIG_ATTR_AMSDU_CTRL);
+		tid_conf->amsdu =
+			nla_get_u8(attrs[NL80211_TID_CONFIG_ATTR_AMSDU_CTRL]);
+	}
+
 	if (peer)
 		mask = rdev->wiphy.tid_config_support.peer;
 	else
-- 
2.11.0