From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath9k-devel@qca.qualcomm.com, linux-wireless@vger.kernel.org,
Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 1/2] ath9k: Set RX filter based to allow broadcast Action frame RX
Date: Sun, 26 Apr 2020 11:47:32 +0300 [thread overview]
Message-ID: <20200426084733.7889-1-jouni@codeaurora.org> (raw)
Advertise support for multicast frame registration and update the RX
filter based on the recently added FIF_MCAST_ACTION to allow broadcast
Action frames to be received. This is needed for Device Provisioning
Protocol (DPP) use cases that use broadcast Public Action frames.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
drivers/net/wireless/ath/ath9k/init.c | 2 ++
drivers/net/wireless/ath/ath9k/main.c | 1 +
drivers/net/wireless/ath/ath9k/recv.c | 3 ++-
3 files changed, 5 insertions(+), 1 deletion(-)
This depends on "mac80211: Process multicast RX registration for Action
frames" from mac80211-next.
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 17c318902cb8..289a2444d534 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -1012,6 +1012,8 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_AIRTIME_FAIRNESS);
+ wiphy_ext_feature_set(hw->wiphy,
+ NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS);
}
int ath9k_init_device(u16 devid, struct ath_softc *sc,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 457e9b0d21ca..a47f6e978095 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1476,6 +1476,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
FIF_OTHER_BSS | \
FIF_BCN_PRBRESP_PROMISC | \
FIF_PROBE_REQ | \
+ FIF_MCAST_ACTION | \
FIF_FCSFAIL)
/* FIXME: sc->sc_full_reset ? */
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 06e660858766..0c0624a3b40d 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -413,7 +413,8 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
if (sc->cur_chandef.width != NL80211_CHAN_WIDTH_20_NOHT)
rfilt |= ATH9K_RX_FILTER_COMP_BAR;
- if (sc->cur_chan->nvifs > 1 || (sc->cur_chan->rxfilter & FIF_OTHER_BSS)) {
+ if (sc->cur_chan->nvifs > 1 ||
+ (sc->cur_chan->rxfilter & (FIF_OTHER_BSS | FIF_MCAST_ACTION))) {
/* This is needed for older chips */
if (sc->sc_ah->hw_version.macVersion <= AR_SREV_VERSION_9160)
rfilt |= ATH9K_RX_FILTER_PROM;
--
2.20.1
next reply other threads:[~2020-04-26 8:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-26 8:47 Jouni Malinen [this message]
2020-04-26 8:47 ` [PATCH 2/2] ath9k_htc: Set RX filter based to allow broadcast Action frame RX Jouni Malinen
2020-04-28 4:35 ` kbuild test robot
2020-04-28 5:05 ` Kalle Valo
2020-05-08 8:39 ` [PATCH 1/2] ath9k: " Kalle Valo
2020-05-30 14:18 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200426084733.7889-1-jouni@codeaurora.org \
--to=jouni@codeaurora.org \
--cc=ath9k-devel@qca.qualcomm.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).