From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Subject: [PATCH v4 5/8] ath11k: set psc channel flag when sending channel list to firmware.
Date: Sun, 31 May 2020 11:55:57 -0700 [thread overview]
Message-ID: <20200531185600.20789-6-pradeepc@codeaurora.org> (raw)
In-Reply-To: <20200531185600.20789-1-pradeepc@codeaurora.org>
If 6 ghz channel is a Preferred Scanning Channel(PSC), mark
the channel flag accordingly when updating channel list to firmware.
This will be used when making scanning decision in 6GHz channels.
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
v4:
- use cfg80211_channel_is_psc.
v3:
- use helper function ieee80211_is_channel_psc() instead of
channel flag for identifying 6GHz PSC channels.
drivers/net/wireless/ath/ath11k/reg.c | 4 ++++
drivers/net/wireless/ath/ath11k/wmi.h | 3 ++-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index 453aa9c06969..7c9dc91cc48a 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -161,6 +161,10 @@ int ath11k_reg_update_chan_list(struct ath11k *ar)
else
ch->phy_mode = MODE_11A;
+ if (channel->band == NL80211_BAND_6GHZ &&
+ cfg80211_channel_is_psc(channel))
+ ch->psc_channel = true;
+
ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
"mac channel [%d/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
i, params->nallchans,
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index fd82cff7537b..76c2da2c5db7 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2520,7 +2520,8 @@ struct channel_param {
allow_ht:1,
allow_vht:1,
allow_he:1,
- set_agile:1;
+ set_agile:1,
+ psc_channel:1;
u32 phy_mode;
u32 cfreq1;
u32 cfreq2;
--
2.17.1
next prev parent reply other threads:[~2020-05-31 18:56 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-31 18:55 [PATCH v4 0/8] add 6GHz radio support in ath11k driver Pradeep Kumar Chitrapu
2020-05-31 18:55 ` [PATCH v4 1/8] ath11k: add 6G frequency list supported by driver Pradeep Kumar Chitrapu
2020-05-31 18:55 ` [PATCH v4 2/8] ath11k: add support for 6GHz radio in driver Pradeep Kumar Chitrapu
2020-05-31 18:55 ` [PATCH v4 3/8] ath11k: Use freq instead of channel number in rx path Pradeep Kumar Chitrapu
2020-05-31 18:55 ` [PATCH v4 4/8] ath11k: extend peer_assoc_cmd for 6GHz band Pradeep Kumar Chitrapu
2020-05-31 18:55 ` Pradeep Kumar Chitrapu [this message]
2020-06-01 1:10 ` [PATCH v4 5/8] ath11k: set psc channel flag when sending channel list to firmware kbuild test robot
2020-06-01 5:34 ` kbuild test robot
2020-05-31 18:55 ` [PATCH v4 6/8] ath11k: Add 6G scan dwell time parameter in scan request command Pradeep Kumar Chitrapu
2020-05-31 18:55 ` [PATCH v4 7/8] ath11k: Send multiple scan_chan_list messages if required Pradeep Kumar Chitrapu
2020-05-31 18:56 ` [PATCH v4 8/8] ath11k: Add support for 6g scan hint Pradeep Kumar Chitrapu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200531185600.20789-6-pradeepc@codeaurora.org \
--to=pradeepc@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox