From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Subject: [PATCH v5 4/8] ath11k: extend peer_assoc_cmd for 6GHz band
Date: Tue, 2 Jun 2020 17:17:20 -0700 [thread overview]
Message-ID: <20200603001724.12161-5-pradeepc@codeaurora.org> (raw)
In-Reply-To: <20200603001724.12161-1-pradeepc@codeaurora.org>
This adds support required for configuring min_data_rate of 6GHz oper IE
and peer_he_caps_6ghz in peer assoc command. The Minimum Rate field
indicates the minimum rate, in units of 1 Mb/s, that the non-AP STA is
allowed to use for sending PPDUs as defined in IEEE P802.11ax™/D6.0.
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/wmi.c | 2 ++
drivers/net/wireless/ath/ath11k/wmi.h | 5 +++++
2 files changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 500108fa59d9..a6bbb3badd1f 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1789,6 +1789,7 @@ int ath11k_wmi_send_peer_assoc_cmd(struct ath11k *ar,
cmd->peer_he_cap_info = param->peer_he_cap_macinfo[0];
cmd->peer_he_cap_info_ext = param->peer_he_cap_macinfo[1];
cmd->peer_he_cap_info_internal = param->peer_he_cap_macinfo_internal;
+ cmd->peer_he_caps_6ghz = param->peer_he_caps_6ghz;
cmd->peer_he_ops = param->peer_he_ops;
memcpy(&cmd->peer_he_cap_phy, ¶m->peer_he_cap_phyinfo,
sizeof(param->peer_he_cap_phyinfo));
@@ -1842,6 +1843,7 @@ int ath11k_wmi_send_peer_assoc_cmd(struct ath11k *ar,
/* HE Rates */
cmd->peer_he_mcs = param->peer_he_mcs_count;
+ cmd->min_data_rate = param->min_data_rate;
ptr += sizeof(*mcs);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index afa3c4cf90e9..fd82cff7537b 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -1011,6 +1011,7 @@ enum wmi_tlv_vdev_param {
WMI_VDEV_PARAM_FILS_MAX_CHANNEL_GUARD_TIME,
WMI_VDEV_PARAM_BA_MODE = 0x7e,
WMI_VDEV_PARAM_SET_HE_SOUNDING_MODE = 0x87,
+ WMI_VDEV_PARAM_6GHZ_PARAMS = 0x99,
WMI_VDEV_PARAM_PROTOTYPE = 0x8000,
WMI_VDEV_PARAM_BSS_COLOR,
WMI_VDEV_PARAM_SET_HEMU_MODE,
@@ -3444,6 +3445,7 @@ struct peer_assoc_params {
u32 tx_max_rate;
u32 tx_mcs_set;
u8 vht_capable;
+ u8 min_data_rate;
u32 tx_max_mcs_nss;
u32 peer_bw_rxnss_override;
bool is_pmf_enabled;
@@ -3472,6 +3474,7 @@ struct peer_assoc_params {
bool he_flag;
u32 peer_he_cap_macinfo[2];
u32 peer_he_cap_macinfo_internal;
+ u32 peer_he_caps_6ghz;
u32 peer_he_ops;
u32 peer_he_cap_phyinfo[WMI_HOST_MAX_HECAP_PHY_SIZE];
u32 peer_he_mcs_count;
@@ -3509,6 +3512,8 @@ struct wmi_peer_assoc_complete_cmd {
u32 peer_he_mcs;
u32 peer_he_cap_info_ext;
u32 peer_he_cap_info_internal;
+ u32 min_data_rate;
+ u32 peer_he_caps_6ghz;
} __packed;
struct wmi_stop_scan_cmd {
--
2.17.1
next prev parent reply other threads:[~2020-06-03 0:17 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-03 0:17 [PATCH v5 0/8] add 6GHz radio support in ath11k driver Pradeep Kumar Chitrapu
2020-06-03 0:17 ` [PATCH v5 1/8] ath11k: add 6G frequency list supported by driver Pradeep Kumar Chitrapu
2020-06-08 15:41 ` Kalle Valo
2020-06-11 5:06 ` Kalle Valo
2020-06-03 0:17 ` [PATCH v5 2/8] ath11k: add support for 6GHz radio in driver Pradeep Kumar Chitrapu
2020-09-15 11:16 ` Wen Gong
2020-09-15 12:32 ` Wen Gong
2020-09-15 23:07 ` Pradeep Kumar Chitrapu
2020-09-16 2:33 ` Wen Gong
2020-09-16 3:56 ` Wen Gong
2020-06-03 0:17 ` [PATCH v5 3/8] ath11k: Use freq instead of channel number in rx path Pradeep Kumar Chitrapu
2020-06-03 0:17 ` Pradeep Kumar Chitrapu [this message]
2020-06-03 0:17 ` [PATCH v5 5/8] ath11k: set psc channel flag when sending channel list to firmware Pradeep Kumar Chitrapu
2020-06-03 0:17 ` [PATCH v5 6/8] ath11k: Add 6G scan dwell time parameter in scan request command Pradeep Kumar Chitrapu
2020-06-03 0:17 ` [PATCH v5 7/8] ath11k: Send multiple scan_chan_list messages if required Pradeep Kumar Chitrapu
2020-06-09 6:37 ` Kalle Valo
2020-06-03 0:17 ` [PATCH v5 8/8] ath11k: Add support for 6g scan hint Pradeep Kumar Chitrapu
2020-08-24 3:29 ` Wen Gong
2020-09-09 8:38 ` Kalle Valo
2020-06-03 13:12 ` [PATCH v5 0/8] add 6GHz radio support in ath11k driver Kalle Valo
2020-06-03 17:50 ` Pradeep Kumar Chitrapu
2020-06-08 11:04 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200603001724.12161-5-pradeepc@codeaurora.org \
--to=pradeepc@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).