From: <yhchuang@realtek.com>
To: <kvalo@codeaurora.org>
Cc: <linux-wireless@vger.kernel.org>, <tehuang@realtek.com>,
<bigeasy@linutronix.de>
Subject: [PATCH v2 1/5] rtw88: 8821c: add cck pd settings
Date: Wed, 3 Jun 2020 17:42:14 +0800 [thread overview]
Message-ID: <20200603094218.19942-2-yhchuang@realtek.com> (raw)
In-Reply-To: <20200603094218.19942-1-yhchuang@realtek.com>
From: Tzu-En Huang <tehuang@realtek.com>
CCK PD can reduce the number of false alarm of the CCK rates.
It dynamically adjusts the power threshold and CS ratio.
The values are compared to the values of the previous level, if
the level is changed, set new values of power threshold and CS
ratio.
Implement rtw_chip_ops::cck_pd_set() for 8821c.
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
drivers/net/wireless/realtek/rtw88/main.h | 1 +
drivers/net/wireless/realtek/rtw88/rtw8821c.c | 25 +++++++++++++++++++
drivers/net/wireless/realtek/rtw88/rtw8821c.h | 3 +++
3 files changed, 29 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/main.h b/drivers/net/wireless/realtek/rtw88/main.h
index 82b6accf4744..605a70e311fc 100644
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -1483,6 +1483,7 @@ struct rtw_dm_info {
/* [bandwidth 0:20M/1:40M][number of path] */
u8 cck_pd_lv[2][RTW_RF_PATH_MAX];
u32 cck_fa_avg;
+ u8 cck_pd_default;
/* save the last rx phy status for debug */
s8 rx_snr[RTW_RF_PATH_MAX];
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.c b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
index 4bd4164d23ef..904eb494ccad 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
@@ -102,6 +102,7 @@ static void rtw8821c_phy_set_param(struct rtw_dev *rtwdev)
rtwdev->chip->ch_param[2] = rtw_read32_mask(rtwdev, REG_TXFILTER, MASKDWORD);
rtw_phy_init(rtwdev);
+ rtwdev->dm_info.cck_pd_default = rtw_read8(rtwdev, REG_CSRATIO) & 0x1f;
}
static int rtw8821c_mac_init(struct rtw_dev *rtwdev)
@@ -596,6 +597,29 @@ static void rtw8821c_phy_calibration(struct rtw_dev *rtwdev)
rtw8821c_do_iqk(rtwdev);
}
+static void rtw8821c_phy_cck_pd_set(struct rtw_dev *rtwdev, u8 new_lvl)
+{
+ struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+ u8 pd[CCK_PD_LV_MAX] = {3, 7, 13, 13, 13};
+
+ if (dm_info->min_rssi > 60) {
+ new_lvl = 4;
+ pd[4] = 0x1d;
+ goto set_cck_pd;
+ }
+
+ if (dm_info->cck_pd_lv[RTW_CHANNEL_WIDTH_20][RF_PATH_A] == new_lvl)
+ return;
+
+ dm_info->cck_fa_avg = CCK_FA_AVG_RESET;
+
+set_cck_pd:
+ dm_info->cck_pd_lv[RTW_CHANNEL_WIDTH_20][RF_PATH_A] = new_lvl;
+ rtw_write32_mask(rtwdev, REG_PWRTH, 0x3f0000, pd[new_lvl]);
+ rtw_write32_mask(rtwdev, REG_PWRTH2, 0x1f0000,
+ dm_info->cck_pd_default + new_lvl * 2);
+}
+
static struct rtw_pwr_seq_cmd trans_carddis_to_cardemu_8821c[] = {
{0x0086,
RTW_PWR_CUT_ALL_MSK,
@@ -1035,6 +1059,7 @@ static struct rtw_chip_ops rtw8821c_ops = {
.cfg_ldo25 = rtw8821c_cfg_ldo25,
.false_alarm_statistics = rtw8821c_false_alarm_statistics,
.phy_calibration = rtw8821c_phy_calibration,
+ .cck_pd_set = rtw8821c_phy_cck_pd_set,
};
struct rtw_chip_info rtw8821c_hw_spec = {
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.h b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
index 3b7d12bf7728..bc66b91cd961 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.h
@@ -186,11 +186,14 @@ _rtw_write32s_mask(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 data)
#define REG_FAS 0x9a4
#define REG_RXSB 0xa00
#define REG_ADCINI 0xa04
+#define REG_PWRTH 0xa08
#define REG_TXSF2 0xa24
#define REG_TXSF6 0xa28
#define REG_FA_CCK 0xa5c
#define REG_RXDESC 0xa2c
#define REG_ENTXCCK 0xa80
+#define REG_PWRTH2 0xaa8
+#define REG_CSRATIO 0xaaa
#define REG_TXFILTER 0xaac
#define REG_CNTRST 0xb58
#define REG_AGCTR_A 0xc08
--
2.17.1
next prev parent reply other threads:[~2020-06-03 9:42 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-03 9:42 [PATCH v2 0/5] rtw88: 8821c: the rest patches to support 8821c yhchuang
2020-06-03 9:42 ` yhchuang [this message]
2020-06-05 10:53 ` [PATCH v2 1/5] rtw88: 8821c: add cck pd settings Sebastian Andrzej Siewior
2020-07-15 8:50 ` Kalle Valo
2020-07-15 9:29 ` Tony Chuang
2020-07-15 9:10 ` Kalle Valo
2020-06-03 9:42 ` [PATCH v2 2/5] rtw88: 8821c: add power tracking yhchuang
2020-06-05 14:30 ` Sebastian Andrzej Siewior
2020-06-03 9:42 ` [PATCH v2 3/5] rtw88: 8821c: add beamformee support yhchuang
2020-06-03 9:42 ` [PATCH v2 4/5] rtw88: single rf path chips don't support TX STBC yhchuang
2020-06-03 9:42 ` [PATCH v2 5/5] rtw88: 8821c: Add 8821CE to Kconfig and Makefile yhchuang
2020-06-08 19:01 ` Larry Finger
2020-06-16 11:07 ` Tony Chuang
2020-07-02 5:17 ` Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200603094218.19942-2-yhchuang@realtek.com \
--to=yhchuang@realtek.com \
--cc=bigeasy@linutronix.de \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=tehuang@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox