From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 4/8] mt76: move mt76_check_agg_ssn to driver tx_prepare calls
Date: Wed, 12 Aug 2020 12:28:27 +0200 [thread overview]
Message-ID: <20200812102831.11991-4-nbd@nbd.name> (raw)
In-Reply-To: <20200812102831.11991-1-nbd@nbd.name>
mt7615 and newer drivers do not need this, since they use sequence number offload
Moving this code also reduces the number of callsites to make it easier to review
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
.../net/wireless/mediatek/mt76/mt7603/mac.c | 2 +
.../net/wireless/mediatek/mt76/mt76x02_mac.c | 2 +
drivers/net/wireless/mediatek/mt76/tx.c | 38 +++++++------------
4 files changed, 18 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index c7afc1c7cb2f..f11978f2bd8f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -914,6 +914,7 @@ void mt76_txq_remove(struct mt76_dev *dev, struct ieee80211_txq *txq);
void mt76_wake_tx_queue(struct ieee80211_hw *hw, struct ieee80211_txq *txq);
void mt76_stop_tx_queues(struct mt76_dev *dev, struct ieee80211_sta *sta,
bool send_bar);
+void mt76_tx_check_agg_ssn(struct ieee80211_sta *sta, struct sk_buff *skb);
void mt76_txq_schedule(struct mt76_phy *phy, enum mt76_txq_id qid);
void mt76_txq_schedule_all(struct mt76_phy *phy);
void mt76_tx_tasklet(unsigned long data);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
index 8060c1514396..625dc6d581f2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mac.c
@@ -1036,6 +1036,8 @@ int mt7603_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
IEEE80211_TX_CTL_CLEAR_PS_FILT)) ||
(info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE))
mt7603_wtbl_set_ps(dev, msta, false);
+
+ mt76_tx_check_agg_ssn(sta, tx_info->skb);
}
pid = mt76_tx_status_skb_add(mdev, wcid, tx_info->skb);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
index e4e03beabe43..af2e6ffce001 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
@@ -349,6 +349,8 @@ void mt76x02_mac_write_txwi(struct mt76x02_dev *dev, struct mt76x02_txwi *txwi,
memset(txwi, 0, sizeof(*txwi));
+ mt76_tx_check_agg_ssn(sta, skb);
+
if (!info->control.hw_key && wcid && wcid->hw_key_idx != 0xff &&
ieee80211_has_protected(hdr->frame_control)) {
wcid = NULL;
diff --git a/drivers/net/wireless/mediatek/mt76/tx.c b/drivers/net/wireless/mediatek/mt76/tx.c
index 40ec55ac9a7c..d8252e28bacd 100644
--- a/drivers/net/wireless/mediatek/mt76/tx.c
+++ b/drivers/net/wireless/mediatek/mt76/tx.c
@@ -83,17 +83,27 @@ mt76_txq_get_qid(struct ieee80211_txq *txq)
return txq->ac;
}
-static void
-mt76_check_agg_ssn(struct mt76_txq *mtxq, struct sk_buff *skb)
+void
+mt76_tx_check_agg_ssn(struct ieee80211_sta *sta, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_txq *txq;
+ struct mt76_txq *mtxq;
+ u8 tid;
- if (!ieee80211_is_data_qos(hdr->frame_control) ||
+ if (!sta || !ieee80211_is_data_qos(hdr->frame_control) ||
!ieee80211_is_data_present(hdr->frame_control))
return;
+ tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
+ txq = sta->txq[tid];
+ mtxq = (struct mt76_txq *)txq->drv_priv;
+ if (!mtxq->aggr)
+ return;
+
mtxq->agg_ssn = le16_to_cpu(hdr->seq_ctrl) + 0x10;
}
+EXPORT_SYMBOL_GPL(mt76_tx_check_agg_ssn);
void
mt76_tx_status_lock(struct mt76_dev *dev, struct sk_buff_head *list)
@@ -288,19 +298,6 @@ mt76_tx(struct mt76_phy *phy, struct ieee80211_sta *sta,
ieee80211_get_tx_rates(info->control.vif, sta, skb,
info->control.rates, 1);
- if (sta && ieee80211_is_data_qos(hdr->frame_control)) {
- struct ieee80211_txq *txq;
- struct mt76_txq *mtxq;
- u8 tid;
-
- tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK;
- txq = sta->txq[tid];
- mtxq = (struct mt76_txq *)txq->drv_priv;
-
- if (mtxq->aggr)
- mt76_check_agg_ssn(mtxq, skb);
- }
-
if (ext_phy)
info->hw_queue |= MT_TX_HW_QUEUE_EXT_PHY;
@@ -390,9 +387,6 @@ mt76_release_buffered_frames(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
if (!skb)
break;
- if (mtxq->aggr)
- mt76_check_agg_ssn(mtxq, skb);
-
nframes--;
if (last_skb)
mt76_queue_ps_skb(dev, sta, last_skb, false);
@@ -446,9 +440,6 @@ mt76_txq_send_burst(struct mt76_phy *phy, struct mt76_sw_queue *sq,
ampdu = IEEE80211_SKB_CB(skb)->flags & IEEE80211_TX_CTL_AMPDU;
limit = ampdu ? 16 : 3;
- if (ampdu)
- mt76_check_agg_ssn(mtxq, skb);
-
idx = dev->queue_ops->tx_queue_skb(dev, qid, skb, wcid, txq->sta);
if (idx < 0)
@@ -479,9 +470,6 @@ mt76_txq_send_burst(struct mt76_phy *phy, struct mt76_sw_queue *sq,
info->control.rates[0] = tx_rate;
- if (cur_ampdu)
- mt76_check_agg_ssn(mtxq, skb);
-
idx = dev->queue_ops->tx_queue_skb(dev, qid, skb, wcid,
txq->sta);
if (idx < 0)
--
2.28.0
next prev parent reply other threads:[~2020-08-12 10:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-12 10:28 [PATCH 1/8] mt76: mt7915: clean up station stats polling and rate control update Felix Fietkau
2020-08-12 10:28 ` [PATCH 2/8] mt76: mt7915: increase tx retry count Felix Fietkau
2020-08-12 10:28 ` [PATCH 3/8] mt76: mt7915: enable offloading of sequence number assignment Felix Fietkau
2020-08-12 10:28 ` Felix Fietkau [this message]
2020-08-12 10:28 ` [PATCH 5/8] mt76: mt7615: remove mtxq->agg_ssn assignment Felix Fietkau
2020-08-12 10:28 ` [PATCH 6/8] mt76: mt7915: simplify aggregation session check Felix Fietkau
2020-08-12 10:28 ` [PATCH 7/8] mt76: mt7915: add missing flags in WMM parameter settings Felix Fietkau
2020-08-12 10:28 ` [PATCH 8/8] mt76: mt7915: add Tx A-MSDU offloading support Felix Fietkau
2020-08-13 7:55 ` [PATCH v2 " Felix Fietkau
2020-08-22 19:14 ` [PATCH v3] " Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200812102831.11991-4-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox