From: Thomas Pedersen <thomas@adapt-ip.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
Thomas Pedersen <thomas@adapt-ip.com>
Subject: [PATCH 2/2] mac80211: initialize last_rate for S1G STAs
Date: Fri, 2 Oct 2020 10:53:08 -0700 [thread overview]
Message-ID: <20201002175308.16374-2-thomas@adapt-ip.com> (raw)
In-Reply-To: <20201002175308.16374-1-thomas@adapt-ip.com>
last_rate is initialized to zero by sta_info_alloc(), but
this indicates legacy bitrate for the last TX rate (and
invalid for the last RX rate). To avoid a warning when
decoding the last rate as legacy (before a data frame
has been sent), initialize them as S1G MCS.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
net/mac80211/Makefile | 1 +
net/mac80211/ieee80211_i.h | 3 +++
net/mac80211/mlme.c | 4 +++-
net/mac80211/rate.c | 1 +
net/mac80211/s1g.c | 17 +++++++++++++++++
net/mac80211/sta_info.h | 1 +
6 files changed, 26 insertions(+), 1 deletion(-)
create mode 100644 net/mac80211/s1g.c
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 6cbb1286d6c0..ad04c361cba5 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -13,6 +13,7 @@ mac80211-y := \
ht.o agg-tx.o agg-rx.o \
vht.o \
he.o \
+ s1g.o \
ibss.o \
iface.o \
rate.o \
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index c3e3578574a6..d9d7a34480b0 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1928,6 +1928,9 @@ void
ieee80211_he_op_ie_to_bss_conf(struct ieee80211_vif *vif,
const struct ieee80211_he_operation *he_op_ie_elem);
+/* S1G */
+void ieee80211_s1g_sta_init(struct sta_info *sta);
+
/* Spectrum management */
void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e9a8e8e94ee6..fe6cfb8d477f 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -5190,8 +5190,10 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
int shift = ieee80211_vif_get_shift(&sdata->vif);
/* TODO: S1G Basic Rate Set is expressed elsewhere */
- if (cbss->channel->band == NL80211_BAND_S1GHZ)
+ if (cbss->channel->band == NL80211_BAND_S1GHZ) {
+ ieee80211_s1g_sta_init(new_sta);
goto skip_rates;
+ }
ieee80211_get_rates(sband, bss->supp_rates,
bss->supp_rates_len,
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 0cba7fed28cf..723762a4052b 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -53,6 +53,7 @@ void rate_control_rate_init(struct sta_info *sta)
/* TODO: check for minstrel_s1g ? */
if (sband->band == NL80211_BAND_S1GHZ) {
+ ieee80211_s1g_sta_init(sta);
rcu_read_unlock();
return;
}
diff --git a/net/mac80211/s1g.c b/net/mac80211/s1g.c
new file mode 100644
index 000000000000..dbc216ad0a6e
--- /dev/null
+++ b/net/mac80211/s1g.c
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/* S1G handling
+ * Copyright(c) 2020 Adapt-IP
+ */
+
+#include <linux/ieee80211.h>
+#include <net/mac80211.h>
+
+#include "ieee80211_i.h"
+
+void ieee80211_s1g_sta_init(struct sta_info *sta)
+{
+ /* avoid indicating legacy bitrates for S1G STAs */
+ sta->tx_stats.last_rate.flags |= IEEE80211_TX_RC_S1G_MCS;
+ sta->rx_stats.last_rate =
+ STA_STATS_FIELD(TYPE, STA_STATS_RATE_TYPE_S1G);
+}
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 91a61b44b4e0..00ae81e9e1a1 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -823,6 +823,7 @@ enum sta_stats_type {
STA_STATS_RATE_TYPE_HT,
STA_STATS_RATE_TYPE_VHT,
STA_STATS_RATE_TYPE_HE,
+ STA_STATS_RATE_TYPE_S1G,
};
#define STA_STATS_FIELD_HT_MCS GENMASK( 7, 0)
--
2.20.1
next prev parent reply other threads:[~2020-10-02 17:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-02 17:53 [PATCH 1/2] mac80211: handle lack of sband->bitrates in rates Thomas Pedersen
2020-10-02 17:53 ` Thomas Pedersen [this message]
2020-10-02 18:55 ` Ben Greear
2020-10-02 20:39 ` Thomas Pedersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201002175308.16374-2-thomas@adapt-ip.com \
--to=thomas@adapt-ip.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).