From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: Johannes Berg <johannes@sipsolutions.net>, ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Subject: [PATCH 3/4] ath11k: support TXOP duration based RTS threshold
Date: Thu, 8 Oct 2020 19:18:10 -0700 [thread overview]
Message-ID: <20201009021811.18584-4-pradeepc@codeaurora.org> (raw)
In-Reply-To: <20201009021811.18584-1-pradeepc@codeaurora.org>
HE operation IE in beacons is constructed based on userspace params,
which firmware might not be aware of. This causes firmware not to
configure TXOP duration based RTS threshold which could cause mismatch
in behaviour with respect to what is being advertised in beacons. This
patch sends HE operation IE fetched from beacon to firmware using
WMI interface for configuration.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 3f63a7bd6b59..77d073054ba2 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -1948,9 +1948,25 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid))
ether_addr_copy(arvif->bssid, info->bssid);
- if (changed & BSS_CHANGED_BEACON_ENABLED)
+ if (changed & BSS_CHANGED_BEACON_ENABLED) {
ath11k_control_beaconing(arvif, info);
+ if (arvif->is_up && vif->bss_conf.he_support &&
+ vif->bss_conf.he_oper.params) {
+ param_id = WMI_VDEV_PARAM_HEOPS_0_31;
+ param_value = vif->bss_conf.he_oper.params;
+ ret = ath11k_wmi_vdev_set_param_cmd(ar, arvif->vdev_id,
+ param_id, param_value);
+ ath11k_dbg(ar->ab, ATH11K_DBG_MAC,
+ "he oper param: %x set for VDEV: %d\n",
+ param_value, arvif->vdev_id);
+
+ if (ret)
+ ath11k_warn(ar->ab, "Failed to set he oper params %x for VDEV %d: %i\n",
+ param_value, arvif->vdev_id, ret);
+ }
+ }
+
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
u32 cts_prot;
--
2.17.1
next prev parent reply other threads:[~2020-10-09 2:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-09 2:18 [PATCH 0/4] ath11k: add support for 256 bitmap in Block ack and duration based RTS threshold Pradeep Kumar Chitrapu
2020-10-09 2:18 ` [PATCH 1/4] mac80211: save HE oper info in BSS config for mesh Pradeep Kumar Chitrapu
2020-10-19 20:29 ` Peter Oh
2020-10-20 15:34 ` Pradeep Kumar Chitrapu
2020-10-09 2:18 ` [PATCH 2/4] ath11k: fix incorrect wmi param for configuring HE operation Pradeep Kumar Chitrapu
2020-10-09 2:18 ` Pradeep Kumar Chitrapu [this message]
2020-10-09 2:18 ` [PATCH 4/4] ath11k: mesh: add support for 256 bitmap in blockack frames in 11ax Pradeep Kumar Chitrapu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201009021811.18584-4-pradeepc@codeaurora.org \
--to=pradeepc@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).