[PATCH] ath11k: fix ZERO address in probe request

[PATCH] ath11k: fix ZERO address in probe request

[Carl Huang]

Host needs to pass at least on bssid with all 0xff to firmware in
WMI_START_SCAN_CMDID, otherwise the bssid and receiver address
in probe requeste are all ZEROs.

This also fixed some hidden AP connection issue because some AP
doesn't respond to probe request which receiver address are all
ZEROs.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index adde14a390ec..9e56544e2cb9 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1946,6 +1946,11 @@ void ath11k_wmi_start_scan_init(struct ath11k *ar,
 				  WMI_SCAN_EVENT_DEQUEUED;
 	arg->scan_flags |= WMI_SCAN_CHAN_STAT_EVENT;
 	arg->num_bssid = 1;
+	/* fill bssid_list[0] with 0xff, otherwise
+	 * bssid and RA will be ZEROs in probe request.
+	 */
+	eth_broadcast_addr(arg->bssid_list[0].addr);
+
 }
 
 static inline void
-- 
2.28.0

Re: [PATCH] ath11k: fix ZERO address in probe request

[Kalle Valo]

Carl Huang <cjhuang@codeaurora.org> wrote:

> Host needs to pass at least on bssid with all 0xff to firmware in
> WMI_START_SCAN_CMDID, otherwise the bssid and receiver address
> in probe requeste are all ZEROs.
> 
> This also fixed some hidden AP connection issue because some AP
> doesn't respond to probe request which receiver address are all
> ZEROs.
> 
> Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
> 
> Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

fa7572c2cfe0 ath11k: fix ZERO address in probe request

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20201012101733.24137-1-cjhuang@codeaurora.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches