* [PATCH v2] ath11k: pci: disable ASPM L0sLs before downloading firmware
@ 2020-12-17 15:22 Kalle Valo
2020-12-18 9:04 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: Kalle Valo @ 2020-12-17 15:22 UTC (permalink / raw)
To: ath11k; +Cc: linux-wireless
From: Carl Huang <cjhuang@codeaurora.org>
Sometimes QCA6390 doesn't switch to amss state as device enters
L1ss state, so disable L0sL1s during firmware downloading.
Driver recovers the ASPM to default value in start callback
or powerdown callback.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
v2:
* add debug messages for asmp state
* add comment to power_down()
drivers/net/wireless/ath/ath11k/pci.c | 36 +++++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/pci.h | 2 ++
2 files changed, 38 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index 9f9a824a4c2d..20b415cd96c4 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -886,6 +886,32 @@ static void ath11k_pci_free_region(struct ath11k_pci *ab_pci)
pci_disable_device(pci_dev);
}
+static void ath11k_pci_aspm_disable(struct ath11k_pci *ab_pci)
+{
+ struct ath11k_base *ab = ab_pci->ab;
+
+ pcie_capability_read_word(ab_pci->pdev, PCI_EXP_LNKCTL,
+ &ab_pci->link_ctl);
+
+ ath11k_dbg(ab, ATH11K_DBG_PCI, "pci link_ctl 0x%04x L0s %d L1 %d\n",
+ ab_pci->link_ctl,
+ u16_get_bits(ab_pci->link_ctl, PCI_EXP_LNKCTL_ASPM_L0S),
+ u16_get_bits(ab_pci->link_ctl, PCI_EXP_LNKCTL_ASPM_L1));
+
+ /* disable L0s and L1 */
+ pcie_capability_write_word(ab_pci->pdev, PCI_EXP_LNKCTL,
+ ab_pci->link_ctl & ~PCI_EXP_LNKCTL_ASPMC);
+
+ set_bit(ATH11K_PCI_ASPM_RESTORE, &ab_pci->flags);
+}
+
+static void ath11k_pci_aspm_restore(struct ath11k_pci *ab_pci)
+{
+ if (test_and_clear_bit(ATH11K_PCI_ASPM_RESTORE, &ab_pci->flags))
+ pcie_capability_write_word(ab_pci->pdev, PCI_EXP_LNKCTL,
+ ab_pci->link_ctl);
+}
+
static int ath11k_pci_power_up(struct ath11k_base *ab)
{
struct ath11k_pci *ab_pci = ath11k_pci_priv(ab);
@@ -895,6 +921,11 @@ static int ath11k_pci_power_up(struct ath11k_base *ab)
clear_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags);
ath11k_pci_sw_reset(ab_pci->ab, true);
+ /* Disable ASPM during firmware download due to problems switching
+ * to AMSS state.
+ */
+ ath11k_pci_aspm_disable(ab_pci);
+
ret = ath11k_mhi_start(ab_pci);
if (ret) {
ath11k_err(ab, "failed to start mhi: %d\n", ret);
@@ -908,6 +939,9 @@ static void ath11k_pci_power_down(struct ath11k_base *ab)
{
struct ath11k_pci *ab_pci = ath11k_pci_priv(ab);
+ /* restore aspm in case firmware bootup fails */
+ ath11k_pci_aspm_restore(ab_pci);
+
ath11k_pci_force_wake(ab_pci->ab);
ath11k_mhi_stop(ab_pci);
clear_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags);
@@ -965,6 +999,8 @@ static int ath11k_pci_start(struct ath11k_base *ab)
set_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags);
+ ath11k_pci_aspm_restore(ab_pci);
+
ath11k_pci_ce_irqs_enable(ab);
ath11k_ce_rx_post_buf(ab);
diff --git a/drivers/net/wireless/ath/ath11k/pci.h b/drivers/net/wireless/ath/ath11k/pci.h
index 0432a702416b..fe44d0dfce19 100644
--- a/drivers/net/wireless/ath/ath11k/pci.h
+++ b/drivers/net/wireless/ath/ath11k/pci.h
@@ -63,6 +63,7 @@ struct ath11k_msi_config {
enum ath11k_pci_flags {
ATH11K_PCI_FLAG_INIT_DONE,
ATH11K_PCI_FLAG_IS_MSI_64,
+ ATH11K_PCI_ASPM_RESTORE,
};
struct ath11k_pci {
@@ -80,6 +81,7 @@ struct ath11k_pci {
/* enum ath11k_pci_flags */
unsigned long flags;
+ u16 link_ctl;
};
static inline struct ath11k_pci *ath11k_pci_priv(struct ath11k_base *ab)
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-12-18 9:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-12-17 15:22 [PATCH v2] ath11k: pci: disable ASPM L0sLs before downloading firmware Kalle Valo
2020-12-18 9:04 ` Kalle Valo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).