From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Cc: johannes@sipsolutions.net
Subject: [PATCH 4/8] mac80211: minstrel_ht: remove old ewma based rate average code
Date: Tue, 29 Dec 2020 17:01:21 +0100 [thread overview]
Message-ID: <20201229160125.92794-4-nbd@nbd.name> (raw)
In-Reply-To: <20201229160125.92794-1-nbd@nbd.name>
The new noise filter has been the default for a while now with no reported
downside and significant improvement compared to the old code.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
net/mac80211/rc80211_minstrel_ht.c | 31 ++++++++----------------------
net/mac80211/rc80211_minstrel_ht.h | 1 -
2 files changed, 8 insertions(+), 24 deletions(-)
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index fb72b014b32c..62bb3c1b0bb5 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -769,17 +769,8 @@ minstrel_ht_calc_rate_stats(struct minstrel_priv *mp,
if (unlikely(mrs->attempts > 0)) {
mrs->sample_skipped = 0;
cur_prob = MINSTREL_FRAC(mrs->success, mrs->attempts);
- if (mp->new_avg) {
- minstrel_filter_avg_add(&mrs->prob_avg,
- &mrs->prob_avg_1, cur_prob);
- } else if (unlikely(!mrs->att_hist)) {
- mrs->prob_avg = cur_prob;
- } else {
- /*update exponential weighted moving avarage */
- mrs->prob_avg = minstrel_ewma(mrs->prob_avg,
- cur_prob,
- EWMA_LEVEL);
- }
+ minstrel_filter_avg_add(&mrs->prob_avg,
+ &mrs->prob_avg_1, cur_prob);
mrs->att_hist += mrs->attempts;
mrs->succ_hist += mrs->success;
} else {
@@ -913,10 +904,8 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
/* Try to increase robustness of max_prob_rate*/
minstrel_ht_prob_rate_reduce_streams(mi);
- /* try to sample all available rates during each interval */
- mi->sample_count *= 8;
- if (mp->new_avg)
- mi->sample_count /= 2;
+ /* try to sample half of all available rates during each interval */
+ mi->sample_count *= 4;
if (sample)
minstrel_ht_rate_sample_switch(mp, mi);
@@ -1040,7 +1029,7 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband,
struct ieee80211_tx_rate *ar = info->status.rates;
struct minstrel_rate_stats *rate, *rate2, *rate_sample = NULL;
struct minstrel_priv *mp = priv;
- u32 update_interval = mp->update_interval / 2;
+ u32 update_interval = mp->update_interval;
bool last, update = false;
bool sample_status = false;
int i;
@@ -1090,9 +1079,8 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband,
switch (mi->sample_mode) {
case MINSTREL_SAMPLE_IDLE:
- if (mp->new_avg &&
- (mp->hw->max_rates > 1 ||
- mi->total_packets_cur < SAMPLE_SWITCH_THR))
+ if (mp->hw->max_rates > 1 ||
+ mi->total_packets_cur < SAMPLE_SWITCH_THR)
update_interval /= 2;
break;
@@ -1832,8 +1820,7 @@ minstrel_ht_alloc(struct ieee80211_hw *hw)
mp->has_mrr = true;
mp->hw = hw;
- mp->update_interval = HZ / 10;
- mp->new_avg = true;
+ mp->update_interval = HZ / 20;
minstrel_ht_init_cck_rates(mp);
for (i = 0; i < ARRAY_SIZE(mp->hw->wiphy->bands); i++)
@@ -1853,8 +1840,6 @@ static void minstrel_ht_add_debugfs(struct ieee80211_hw *hw, void *priv,
&mp->fixed_rate_idx);
debugfs_create_u32("sample_switch", S_IRUGO | S_IWUSR, debugfsdir,
&mp->sample_switch);
- debugfs_create_bool("new_avg", S_IRUGO | S_IWUSR, debugfsdir,
- &mp->new_avg);
}
#endif
diff --git a/net/mac80211/rc80211_minstrel_ht.h b/net/mac80211/rc80211_minstrel_ht.h
index 25c3664bddde..7d6d0b720f6d 100644
--- a/net/mac80211/rc80211_minstrel_ht.h
+++ b/net/mac80211/rc80211_minstrel_ht.h
@@ -60,7 +60,6 @@
struct minstrel_priv {
struct ieee80211_hw *hw;
bool has_mrr;
- bool new_avg;
u32 sample_switch;
unsigned int cw_min;
unsigned int cw_max;
--
2.28.0
next prev parent reply other threads:[~2020-12-29 16:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-29 16:01 [PATCH 1/8] mac80211: minstrel_ht: clean up CCK code Felix Fietkau
2020-12-29 16:01 ` [PATCH 2/8] mac80211: minstrel_ht: add support for OFDM rates on non-HT clients Felix Fietkau
2020-12-29 16:01 ` [PATCH 3/8] mac80211: remove legacy minstrel rate control Felix Fietkau
2020-12-29 16:01 ` Felix Fietkau [this message]
2020-12-29 16:01 ` [PATCH 5/8] mac80211: minstrel_ht: improve ampdu length estimation Felix Fietkau
2020-12-29 16:01 ` [PATCH 6/8] mac80211: minstrel_ht: improve sample rate selection Felix Fietkau
2020-12-29 16:01 ` [PATCH 7/8] mac80211: minstrel_ht: fix max probability " Felix Fietkau
2020-12-29 16:01 ` [PATCH 8/8] mac80211: minstrel_ht: increase stats update interval Felix Fietkau
2020-12-30 4:24 ` [PATCH 1/8] mac80211: minstrel_ht: clean up CCK code kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201229160125.92794-4-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox