From: Shayne Chen <shayne.chen@mediatek.com>
To: Felix Fietkau <nbd@nbd.name>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
Lorenzo Bianconi <lorenzo.bianconi@redhat.com>,
Ryder Lee <ryder.lee@mediatek.com>,
Evelyn Tsai <evelyn.tsai@mediatek.com>,
linux-mediatek <linux-mediatek@lists.infradead.org>,
Shayne Chen <shayne.chen@mediatek.com>
Subject: [PATCH 3/4] mt76: mt7915: add support for continuous tx in testmode
Date: Tue, 5 Jan 2021 19:30:44 +0800 [thread overview]
Message-ID: <20210105113045.17815-3-shayne.chen@mediatek.com> (raw)
In-Reply-To: <20210105113045.17815-1-shayne.chen@mediatek.com>
Implement continuous tx state for MT7915 NIC testmode.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
.../net/wireless/mediatek/mt76/mt7915/mcu.c | 3 +-
.../net/wireless/mediatek/mt76/mt7915/mcu.h | 1 +
.../wireless/mediatek/mt76/mt7915/testmode.c | 160 ++++++++++++++++--
.../wireless/mediatek/mt76/mt7915/testmode.h | 40 +++++
4 files changed, 192 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 9f78e4ec14c9..abf8ba2308ba 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -3208,7 +3208,8 @@ int mt7915_mcu_set_chan_info(struct mt7915_phy *phy, int cmd)
#ifdef CONFIG_NL80211_TESTMODE
if (phy->mt76->test.tx_antenna_mask &&
(phy->mt76->test.state == MT76_TM_STATE_TX_FRAMES ||
- phy->mt76->test.state == MT76_TM_STATE_RX_FRAMES)) {
+ phy->mt76->test.state == MT76_TM_STATE_RX_FRAMES ||
+ phy->mt76->test.state == MT76_TM_STATE_TX_CONT)) {
req.tx_streams_num = fls(phy->mt76->test.tx_antenna_mask);
req.rx_streams = phy->mt76->test.tx_antenna_mask;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
index 163b6f330e67..95ac3c418808 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
@@ -240,6 +240,7 @@ enum {
enum {
MCU_EXT_CMD_EFUSE_ACCESS = 0x01,
+ MCU_EXT_CMD_RF_TEST = 0x04,
MCU_EXT_CMD_PM_STATE_CTRL = 0x07,
MCU_EXT_CMD_CHANNEL_SWITCH = 0x08,
MCU_EXT_CMD_FW_LOG_2_HOST = 0x13,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
index e5af42c70e12..68b170308c4a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
@@ -409,6 +409,16 @@ mt7915_tm_init(struct mt7915_phy *phy, bool en)
mt7915_mcu_add_bss_info(phy, phy->monitor_vif, en);
}
+static void
+mt7915_tm_update_channel(struct mt7915_phy *phy)
+{
+ mutex_unlock(&phy->dev->mt76.mutex);
+ mt7915_set_channel(phy);
+ mutex_lock(&phy->dev->mt76.mutex);
+
+ mt7915_mcu_set_chan_info(phy, MCU_EXT_CMD_SET_RX_PATH);
+}
+
static void
mt7915_tm_set_tx_frames(struct mt7915_phy *phy, bool en)
{
@@ -425,11 +435,7 @@ mt7915_tm_set_tx_frames(struct mt7915_phy *phy, bool en)
mt7915_tm_clean_hwq(phy, dev->mt76.global_wcid.idx);
if (en) {
- mutex_unlock(&dev->mt76.mutex);
- mt7915_set_channel(phy);
- mutex_lock(&dev->mt76.mutex);
-
- mt7915_mcu_set_chan_info(phy, MCU_EXT_CMD_SET_RX_PATH);
+ mt7915_tm_update_channel(phy);
if (td->tx_spe_idx) {
phy->test.spe_idx = td->tx_spe_idx;
@@ -469,15 +475,144 @@ static void
mt7915_tm_set_rx_frames(struct mt7915_phy *phy, bool en)
{
struct mt7915_dev *dev = phy->dev;
- if (en) {
- mutex_unlock(&dev->mt76.mutex);
- mt7915_set_channel(phy);
- mutex_lock(&dev->mt76.mutex);
+ if (en)
+ mt7915_tm_update_channel(phy);
+
+ mt7915_tm_set_trx(phy, TM_MAC_RX_RXV, en);
+}
+
+static int
+mt7915_tm_rf_switch_mode(struct mt7915_dev *dev, u32 oper)
+{
+ struct mt7915_tm_rf_test req = {
+ .op.op_mode = cpu_to_le32(oper),
+ };
+
+ return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_RF_TEST, &req,
+ sizeof(req), true);
+}
+
+static int
+mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
+{
+#define TX_CONT_START 0x05
+#define TX_CONT_STOP 0x06
+ struct mt7915_dev *dev = phy->dev;
+ struct cfg80211_chan_def *chandef = &phy->mt76->chandef;
+ int freq1 = ieee80211_frequency_to_channel(chandef->center_freq1);
+ struct mt76_testmode_data *td = &phy->mt76->test;
+ u32 func_idx = en ? TX_CONT_START : TX_CONT_STOP;
+ u8 rate_idx = td->tx_rate_idx, mode;
+ u16 rateval;
+ struct mt7915_tm_rf_test req = {
+ .action = 1,
+ .icap_len = 120,
+ .op.rf.func_idx = cpu_to_le32(func_idx),
+ };
+ struct tm_tx_cont *tx_cont = &req.op.rf.param.tx_cont;
+
+ tx_cont->control_ch = chandef->chan->hw_value;
+ tx_cont->center_ch = freq1;
+ tx_cont->tx_ant = td->tx_antenna_mask;
+ tx_cont->band = phy != &dev->phy;
+
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_40:
+ tx_cont->bw = CMD_CBW_40MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_80:
+ tx_cont->bw = CMD_CBW_80MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_80P80:
+ tx_cont->bw = CMD_CBW_8080MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_160:
+ tx_cont->bw = CMD_CBW_160MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_5:
+ tx_cont->bw = CMD_CBW_5MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ tx_cont->bw = CMD_CBW_10MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_20:
+ tx_cont->bw = CMD_CBW_20MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ tx_cont->bw = CMD_CBW_20MHZ;
+ break;
+ default:
+ break;
+ }
- mt7915_mcu_set_chan_info(phy, MCU_EXT_CMD_SET_RX_PATH);
+ if (!en) {
+ req.op.rf.param.func_data = cpu_to_le32(phy != &dev->phy);
+ goto out;
}
- mt7915_tm_set_trx(phy, TM_MAC_RX_RXV, en);
+ if (td->tx_rate_mode <= MT76_TM_TX_MODE_OFDM) {
+ struct ieee80211_supported_band *sband;
+ u8 idx = rate_idx;
+
+ if (chandef->chan->band == NL80211_BAND_5GHZ)
+ sband = &phy->mt76->sband_5g.sband;
+ else
+ sband = &phy->mt76->sband_2g.sband;
+
+ if (td->tx_rate_mode == MT76_TM_TX_MODE_OFDM)
+ idx += 4;
+ rate_idx = sband->bitrates[idx].hw_value & 0xff;
+ }
+
+ switch (td->tx_rate_mode) {
+ case MT76_TM_TX_MODE_CCK:
+ mode = MT_PHY_TYPE_CCK;
+ break;
+ case MT76_TM_TX_MODE_OFDM:
+ mode = MT_PHY_TYPE_OFDM;
+ break;
+ case MT76_TM_TX_MODE_HT:
+ mode = MT_PHY_TYPE_HT;
+ break;
+ case MT76_TM_TX_MODE_VHT:
+ mode = MT_PHY_TYPE_VHT;
+ break;
+ case MT76_TM_TX_MODE_HE_SU:
+ mode = MT_PHY_TYPE_HE_SU;
+ break;
+ case MT76_TM_TX_MODE_HE_EXT_SU:
+ mode = MT_PHY_TYPE_HE_EXT_SU;
+ break;
+ case MT76_TM_TX_MODE_HE_TB:
+ mode = MT_PHY_TYPE_HE_TB;
+ break;
+ case MT76_TM_TX_MODE_HE_MU:
+ mode = MT_PHY_TYPE_HE_MU;
+ break;
+ default:
+ break;
+ }
+
+ rateval = mode << 6 | rate_idx;
+ tx_cont->rateval = cpu_to_le16(rateval);
+
+out:
+ if (!en) {
+ int ret;
+
+ ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_RF_TEST, &req,
+ sizeof(req), true);
+ if (ret)
+ return ret;
+
+ return mt7915_tm_rf_switch_mode(dev, RF_OPER_NORMAL);
+ }
+
+ mt7915_tm_rf_switch_mode(dev, RF_OPER_RF_TEST);
+ mt7915_tm_update_channel(phy);
+
+ return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_RF_TEST, &req,
+ sizeof(req), true);
}
static void
@@ -507,6 +642,9 @@ mt7915_tm_set_state(struct mt76_phy *mphy, enum mt76_testmode_state state)
else if (prev_state == MT76_TM_STATE_RX_FRAMES ||
state == MT76_TM_STATE_RX_FRAMES)
mt7915_tm_set_rx_frames(phy, state == MT76_TM_STATE_RX_FRAMES);
+ else if (prev_state == MT76_TM_STATE_TX_CONT ||
+ state == MT76_TM_STATE_TX_CONT)
+ mt7915_tm_set_tx_cont(phy, state == MT76_TM_STATE_TX_CONT);
else if (prev_state == MT76_TM_STATE_OFF ||
state == MT76_TM_STATE_OFF)
mt7915_tm_init(phy, !(state == MT76_TM_STATE_OFF));
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.h b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.h
index da92cad0aa9b..8f8533ef9859 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.h
@@ -56,4 +56,44 @@ enum {
TM_MAC_RX_RXV,
};
+struct tm_tx_cont {
+ u8 control_ch;
+ u8 center_ch;
+ u8 bw;
+ u8 tx_ant;
+ __le16 rateval;
+ u8 band;
+ u8 txfd_mode;
+};
+
+struct mt7915_tm_rf_test {
+ u8 action;
+ u8 icap_len;
+ u8 _rsv[2];
+ union {
+ __le32 op_mode;
+ __le32 freq;
+
+ struct {
+ __le32 func_idx;
+ union {
+ __le32 func_data;
+ __le32 cal_dump;
+
+ struct tm_tx_cont tx_cont;
+
+ u8 _pad[80];
+ } param;
+ } rf;
+ } op;
+} __packed;
+
+enum {
+ RF_OPER_NORMAL,
+ RF_OPER_RF_TEST,
+ RF_OPER_ICAP,
+ RF_OPER_ICAP_OVERLAP,
+ RF_OPER_WIFI_SPECTRUM,
+};
+
#endif
--
2.29.2
next prev parent reply other threads:[~2021-01-05 11:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-05 11:30 [PATCH 1/4] mt76: testmode: add a new state for continuous tx Shayne Chen
2021-01-05 11:30 ` [PATCH 2/4] mt76: mt7915: rework set state part in testmode Shayne Chen
2021-01-05 11:30 ` Shayne Chen [this message]
2021-01-14 10:23 ` [PATCH 3/4] mt76: mt7915: add support for continuous tx " Felix Fietkau
2021-01-05 11:30 ` [PATCH 4/4] mt76: mt7615: mt7915: disable txpower sku when testmode enabled Shayne Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210105113045.17815-3-shayne.chen@mediatek.com \
--to=shayne.chen@mediatek.com \
--cc=evelyn.tsai@mediatek.com \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=nbd@nbd.name \
--cc=ryder.lee@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).